Error 1334 The file ROMAN.TXT_Cmn.....cannot be installed

Hi Guys,
I have a corporate edition of Acrobat 7 Pro. I can install the updates 7.0.5 till 7.0.9 using the .exe files.
When I try to update the Acropro.msi so it can be deployed to the business.
I can update it to version 7.0.7 using the following command:
msiexec /a Acropro.msi /p Ac705Prp_efgj.msp (Version 5 Update)
msiexec /a Acropro.msi /p Acro707.msp (Version 7 Update)
However when I try to update it to version 7.0.8 using the command,
msiexec /a Acropro.msi /p Acro708.msp
I get an error message: Error 1334. The 'ROMAN.TXT_CmnTypeSptExtras' cannot be installed because the file cannot be found in the cabinet file 'Data1.cab'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
I do not get this error when I install the updates manually. Any clues on how to fix this issue? Any help will be appreciated.

Similar Messages

Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.

I had to do a system recovery with a prior date. now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes. Anyone have a solution?

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

I can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'

i can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package! please help!!!!!

“the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Hello,
Did you reinstall lately?
My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
The 10.5.8 drive I'm booted from now has iTunes 8.02 on it.

"The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2

Error message The file "iTunes Library" cannot be read

I just got a new iMac and at the store they migrated what was on my Mac Book onto the iMac. Some updates came up last night and the iTunes one timed out before it could update. I hadn't used iTunes yet or connected the external hard drive where all the music files are, so iTunes is still just full of 'empty' files. The error message I get is:
The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.
Any suggestions? Thanks
iMac Mac OS X (10.0.x)

Look in your Previous iTunes libraries folder to see if there is a backup library you can use - the file name will include the date it was saved, however it may be very out of date. To use a backup linrary, save your exitsting itunes library.itl somewhere then copy the backup library into your iTunes folder and rename it iTunes Library.itl.
If not, with iTunes closed, drag you iTunes library.itl out of the iTunes folder to your desktop. When you next start iTunes it will create an empty library. Add your iTunes Music folder with File>>Add Folder to Library.

Error Message: the file itunes library cannot be read because it was...

...created by a newer version of itunes!!
I get this message after trying to install an older version of itunes because i cant get 7.5 to work http://discussions.apple.com/thread.jspa?threadID=1253279&tstart=0! Anyone know what i could do??
Cheers
Message was edited by: RootinTootinRob

Look in your Previous iTunes libraries folder to see if there is a backup library you can use - the file name will include the date it was saved, however it may be very out of date. To use a backup linrary, save your exitsting itunes library.itl somewhere then copy the backup library into your iTunes folder and rename it iTunes Library.itl.
If not, with iTunes closed, drag you iTunes library.itl out of the iTunes folder to your desktop. When you next start iTunes it will create an empty library. Add your iTunes Music folder with File>>Add Folder to Library.

Error 1334: File pptxflt.flt cannot be installed

When I tried to update Acrobat Pro XI this AM, I received the message "Error 1334. The file 'pptxflt.flt' cannot be installed because the file cannot be found in cabinet file 'PCW_CAB-ACR11004'. This could indicate a network error, an error reading from teh CD-ROM, or a problem with this package." I have cleared all temporary files and rebooted, and tried reinstalling the update. Still nothing. Is this a problem with the update or with my system (Win 7, 64bit)?

I tried both patch and via Help -> check for updates with exactly the same result.
Version 11.0.3 of Acrobat Pro.
Never had problems with regular updates before this one.

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

My windows pc is showing an error message "The file iturnes library itl cannot be read"

My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes". I have not downgraded my itunes or done anything with it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!

If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene

After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do?s

After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do? I have been attempting to move my Library to a newer MacBook Pro.

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

TS1717 error message "The file "I Tunes Library.itl" cannot be read because it was created by a newer version of Itunes." I cannot get Itunes to launch at all

I get the error message The file "iTunes Library.itl" cannot be readbecause it was created by a newer version of itunes.
I tunes will not start, so I can't deauthorize the computer and do an uninstall/reinstall.
I have no idea what this means b/c I didn't import a new library.
Any help would be appreciated.

no one?

Error 1334 The file ROMAN.TXT_Cmn.....cannot be installed

Similar Messages

Maybe you are looking for