Error 1335 Data1.cab corrupt during CS6 installation of Acrobat X.  Any suggestions.

Had to replace hard drive.  Downloaded CS6 Standard files from web site for installation.  Only Acrobat X did not install.  Any suggestions.

Hi,
Please try downloading the CS6 installer from following link and then check the issue:
Download CS6 products
Regards,
Anoop

Similar Messages

  • PSE12 install: Error 1335, Data1.cab corrupt

    PSE12 install: Error 1335, Data1.cab corrupt
    Install from online purchase with download, all remedies are relevant to CD-ROM?!
    How do I get my money back?

    great.  for others:
    if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies:  http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    and activate with your serial number.
    if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps.  typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

  • I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

    I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

    It looks like the CD is damaged.  You could try copying the entire CD on to your hard disk in a temporary folder and then launch the setup.exe file by double clicking on it.
    Can you do this?  Please post back.
    Whether 5 can run in Windows 7 is something I don't know.  You just have to try it.

  • HT4972 I can't update my iPad I keep getting a message that the software for the I pad was corrupted during download and err=1403.  Any suggestions

    I can't update my iPad. The message says, the software for the iPad was corrupted during download.  Err=1403

    What did iTunes Support say when you contacted them ? If it's been more than 48 hours since you contacted them and you haven't had a reply then contact them again.
    If you haven't yet contacted them, then to do so :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption

  • How do I address error 1335, Data1.cab is corrupt, to install?

    I have Photoshop Premiere 8 and would like to install it on my new computer Windows 8. I receive error message 1335 during installation. I have downloaded Photoshop files 3 times, followed web instructions to try again and again (e.g. disabled start up files and services files, deleted old copies, re-started, etc.).  Actually I have had this problem ever since I bought Version 8 but did not use it as I did not need it (managed with easier programs). Now I need it and still cannot install it. Program was bought online from Adobe.

    Adobe Photoshop Elements 8 fails to install. Premiere Elements 8 loaded as expected.

  • Error 1335 'itunes.cab' is corrupt.

    I can't finish the install of the new version of iTunes because of an error 1335. I tried downloading the install package a second time to see if maybe there was just a problem during the download, but no dice. Any ideas?
    --d

    Exactly the same problem. error 1335 iTunes.cab is corrupted.
    Solution: uninstall Quicktime and delete all the iTunes files that iTunes uninstaller fails to delete.
    1. Control Panel -> Add/remove programs -> Quicktime -> uninstall
    2. Rt click on START and select "Search...". Search for "iTunes". (include advanced: hidden and system files). Delete every file found except the Library ones and the folders.
    3. Shutdown / Restart
    4. Download iTunes 6 again. and Install.
    I also downloaded an update to Windows Installer from the microsoft site again, as there was a problem with the version from SP2.
    Good luck

  • Acrobat 10 data1.cab corrupt

    Adobe Acrobat ver. 10.0.3
    Windows 7 Enterprise (64-bit) OS
    English
    I have been trying to update to Acrobat 10.1, but the update keeps failing with the following message:
    Error 1334. The file 'ia32.ppi' cannot be installed because the file cannot be found in cabinet file 'PCW_CAB_ACRO1010'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
    I thought repairing the installation might help, but that also failed with a similar error:
    Error 1334.The file 'zy______.pfm' cannot be installed because the file cannot be found in cabinet file 'Data 1.cab'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
    After seeing a similar question in http://forums.adobe.com/message/3740605, I tried to follow the instructions to create a new AIP by doing the following:
    1. msiexec /a <path of AcroPro.msi for 10.0> TARGETDIR <path where you want to create AIP>
    2. cd to the AIP folder
    3. msiexec /a <AcroPro.msi> /p <path of .msp file (AcrobatUpd1010.msp)>
    But at step #1, I get the following error message:
    Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    What would be the best way to resolve this problem and apply the Acrobat 10.1 update?
    Thanks for any help you can offer.
    -David

    Thanks for taking the time to reply.
    I don't have Carbonite installed on my machine, so that isn't the cause of my particular issue.
    I decided to try what seemed most straightforward: simply copying data1.cab from my Acrobat X installation media and replacing the file on my machine. This seems to have worked and enabled me to apply the 10.1 update without error.
    I have no idea what could have caused data1.cab to become corrupt.

  • Itunes Error Internal Error 2356.Data1.Cab

    Hello everyone. I keep on getting this error everytime i try to install itunes. The error is Internal Error 2356.Data1.Cab. I have no idea on how to fix it and hope someone can help me. Thanks
    Emachines T2642   Windows XP  

    let's try getting an itunes 7 installer log to the Apple Engineers for that one.
    1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
    2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
    3. Type in a space, then the following line:
    /l*v C:\log.txt
    4. Hit return.
    5. The installer will create a log file:
    C:\log.txt
    Find that file and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • TS3276 i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

    i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

    It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
    Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895

  • Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions?

    Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions? Please help

    Are you saying that the "Music" app is not present on your iPod Touch? Perhaps there is an issue with the restrictions on the iPod? If you're absolutely sure that the Music app is not present I would consider creating a backup of your iPod after syncing it with iTunes. I would then consider restoring it if this is the case.

  • Error 1335.The cabinet file 'Data1.cab' corrupt

    Acrobat Professional Design Failed. Could be network error, or problem with the package. Acrobat Professional Install Failed.
    I don't know what to do.
    I have uninstalled and re-installed the entire package and it is not working.
    Windows 7, 62 bit

    HI WatershedCenter,
    Please try the following link and advise if you were able to install the products or not.
    Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
    Cheers,
    Kartikay Sharma

  • Error 1335 iPod.cab is corrupt

    When trying to install iTunes 6, I get the following error:
    iTunes Error: Error 1335. The cabinet file 'iPod.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    Abort, Retry, Ignore
    I've attempted to download this installer mulitple times. I even tried downloading it from a seperate NIC since I saw one guy had an nvidia firewall issue. I am attempting to install it from my desktop folder and I'm also on the administrator profile on this PC. I'm running WinXP SP2. No firewalls up.
    I've tried the Microsoft Cleanup utility, but itunes nor quicktime were listed. I've deleted all reg keys associated with apple. My system is totally void of all Apple related installations.
    I tried to install the iPod software seperately and succeeded. If I hit retry a few times, the progress bar goes all the way across before I have to hit ignore. I then get a white x with a red circle saying Internal Error 2350. The installation rolls back and another message comes up.
    Error: -1603 Fatal error during installation.
    Consult Windows installer help (msi.chm) or MSDN for more information.
    I'm at a loss.

    I finally figured it out. All those temp directories in the other posts don't get down to the solutions.
    First, I have a built in nvidia firewall on one of my nics. I switched nics and redownloaded the itunes installer. I then went to the properties of the installer.
    If you look at the comments of the installer, you may see something like this:
    Setup=iTunesSetup.exe
    Silent=2
    Path=.\%windir%\Downloaded Installations\{872653C6-5DDC-488B-B7C2-CF9E4D9335E5}
    Overwrite=2
    So, I went to my c:\windows\downloaded installations\ folder and deleted that folder that started with 872..
    Since I did that, the installer went through like nothing else.
    iTunes is now working and installing successfully. I hope this helps for anyone else.

  • How to solve Error DW030 during CS6 installation (Mavericks)?

    This computer (running Mac OS 10.10.1) needs a way to install Acrobat from the CS6 DVD.
    The CS6 installation went well except for Acrobat, where it gave error DW030. Unfortunately, following the instructions to reboot in Safe Mode deleted the detailed error message.
    Running the installer again reports this:
    We've encountered the following issues
    Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
    Too bad! That page says:
    The Adobe Support Advisor has been discontinued
    Is there any way to recover from this? Is it safe to delete the whole thing and try again?

    That excerpt was the best error in the log. Following is the entire section of the log that contains the error. The content of the log that precedes this is a long inventory of those adobe products installed ("Updating media sources"), but nothing earlier than this contained the word "error" until the section in the earlier posting. To make the log easier to see, I have highlighted all the words with "error".
    BEGIN InstallOperationsQueue Ordered operations
      {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0:  with operation repair
      {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0:  with operation install
      {D8C642B6-A719-4234-8039-2654ED436D2A} CS6 Design and Web Premium 6.0.0.0:  with operation repair
      {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0:  with operation install
    END InstallOperationsQueue Ordered operations
    Calling the custom action code for pre-repair for payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
    ::START TIMER:: [Payload Operation :{C346BBCF-A687-4500-BB19-EE9C2D6FF284}]
    Initializing the INSTALLDIR with PDB data for payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284}
    Located the INSTALLDIR for payload '{C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0' : '/Library/Application Support/Adobe/ssc'
    [       2] Mon Dec 29 17:36:09 2014  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Installer Operation: PayloadUninstaller
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    Session {D8C642B6-A719-4234-8039-2654ED436D2A} modify request for AdobeCode: {D8C642B6-A719-4234-8039-2654ED436D2A}
    Effective AdobeCode for: {D8C642B6-A719-4234-8039-2654ED436D2A} is {D8C642B6-A719-4234-8039-2654ED436D2A}
    Session includes local copy of payload for repair source
    Repair payload source package: /Volumes/CS6 DesWebPrm 1/Adobe CS6 Design and Web Premium/payloads/AdobeDesignWebPremium6-mul/AdobeDesignWebPremium6-mul.dmg
    Payload {D8C642B6-A719-4234-8039-2654ED436D2A} CS6 Design and Web Premium 6.0.0.0: Calling ARKEngine from path /Users/eitzmann/Applications/Adobe/OOBE/PDApp/DECore/DE6/resources
    [       2] Mon Dec 29 17:36:14 2014  INFO
    Beginning installation for payload at /private/tmp/.tempdirgacl32AL/Install.db
    Evaluating condition# 1(Seq 3)
    Condition failed(Seq 3)
    Evaluating condition# 1(Seq 4)
    Condition failed(Seq 4)
    Completing installation for payload at /private/tmp/.tempdirgacl32AL/Install.db
    UninstallDBPath=/Library/Application Support/Adobe/Uninstall/{D8C642B6-A719-4234-8039-2654ED436D2A}.db
    Physical payload repair result:0
    [       0] Mon Dec 29 17:36:14 2014  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 0 =*=*=*=*=*=*=*=*=*=*=*=*=*
    :: END TIMER :: [Payload Operation :{D8C642B6-A719-4234-8039-2654ED436D2A}] took 2328 milliseconds (2.328 seconds) DTR = 134.021 KBPS (0.13088 MBPS)
    User specified overrideFile:
    The csu inventory was not updated for payload {D8C642B6-A719-4234-8039-2654ED436D2A} CS6 Design and Web Premium 6.0.0.0, value of local var is -1
    Calling the custom action code for post-repair for payload {D8C642B6-A719-4234-8039-2654ED436D2A} CS6 Design and Web Premium 6.0.0.0
    ::START TIMER:: [Post payload :{D8C642B6-A719-4234-8039-2654ED436D2A}]
    In PostPayloadReinstallProc
    Custom action return code: 0
    :: END TIMER :: [Post payload :{D8C642B6-A719-4234-8039-2654ED436D2A}] took 0 milliseconds (0 seconds)
    Calling the custom action code for pre-install for payload {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0
    ::START TIMER:: [Pre payload :{E1C48031-9366-427F-AC04-535CEDAAD995}]
    Custom action return code: 65535
    :: END TIMER :: [Pre payload :{E1C48031-9366-427F-AC04-535CEDAAD995}] took 0 milliseconds (0 seconds)
    [       0] Mon Dec 29 17:36:14 2014 ERROR
    DW030: Custom Action for payload {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 returned error. Failing this payload.
    [       0] Mon Dec 29 17:36:18 2014  INFO
    No operation.  We're done:
    Updating driver data - Action: Remove driver entry
    Updating driver data successful. Driver entry was added. ARP estimated size 6075927KB
    [       0] Mon Dec 29 17:36:20 2014  INFO
    Total components installed: 0
    Successfully repaired 2 components:
    - Suite Shared Configuration CS6
    - CS6 Design and Web Premium
    Total components removed: 0
    [       0] Mon Dec 29 17:36:20 2014 ERROR
    DW050: The following payload errors were found during install:
    DW050:  - Acrobat Professional: Install failed
    DW050:  - Acrobat X Pro : Install failed
    [       0] Mon Dec 29 17:36:20 2014  INFO
    Call PostSession Custom Hook
    ::START TIMER:: [Post session :{D8C642B6-A719-4234-8039-2654ED436D2A}]
    In ReinstallSessionCloseProc
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Successfully retreived the mediaSignature: {D8C642B6-A719-4234-8039-2654ED436D2A}
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Successfully retreived the installLanguage: en_US
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Getting payloads from pdb.db
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Opened PCD session
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Retreived the path to Application xml: /Library/Application Support/Adobe/Adobe Creative Suite 6 Design and Web Premium/AMT/application.xml
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Update to PCF client is successful!
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :Succesfully retrieved the LEID of the Driver Payload
    CS6 Suites Custom hook: Adobe Flash Builder 4.6 :iterating through the payload_data table to retreive the matching payload family, name and version for Adobe Flash Builder 4.6
    CS6 Suites Custom hook: Successfully Updated PCFClientFile and cache.db for Adobe Flash Builder 4.6
    CS6 Suites Custom hook: Acrobat X Pro :
    CS6 Suites Custom hook: Acrobat X Pro :Successfully retreived the mediaSignature: {D8C642B6-A719-4234-8039-2654ED436D2A}
    CS6 Suites Custom hook: Acrobat X Pro :Successfully retreived the installLanguage: en_US
    CS6 Suites Custom hook: Acrobat X Pro :Getting payloads from pdb.db
    CS6 Suites Custom hook: Acrobat X Pro :Opened PCD session
    CS6 Suites Custom hook: Acrobat X Pro :Retreived the path to Application xml: /Library/Application Support/Adobe/Adobe Creative Suite 6 Design and Web Premium/AMT/application.xml
    CS6 Suites Custom hook: Acrobat X Pro :Update to PCF client is successful!
    CS6 Suites Custom hook: Acrobat X Pro :Succesfully retrieved the LEID of the Driver Payload
    CS6 Suites Custom hook: Acrobat X Pro :iterating through the payload_data table to retreive the matching payload family, name and version for Acrobat X Pro
    CS6 Suites Custom hook: Successfully Updated PCFClientFile and cache.db for Acrobat Professional 10.0
    Custom action return code: 0
    :: END TIMER :: [Post session :{D8C642B6-A719-4234-8039-2654ED436D2A}] took 15 milliseconds (0.015 seconds) DTR = 266.667 KBPS (0.260417 MBPS)
    :: END TIMER :: [Total Timer] took 22923 milliseconds (22.923 seconds) DTR = 98.0674 KBPS (0.095769 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW030: Custom Action for payload {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 returned error. Failing this payload.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW030: Custom Action for payload {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 returned error. Failing this payload.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    [       0] Mon Dec 29 17:36:21 2014  INFO
    Exit Code: 6 - Silent workflow completed with errors.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW030, DW050 ...
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  • Installation of Blackberry Desktop Software fails: Data1.cab corrupted

    Hi,
    I got some trouble to setup BlackBerry Desktop on my PC. I've tried to download and setup the software three times, but there is always the same message: Data1.cab seems to be corrupted. I tried to unzip the file manually, without success...
    Does someone have an idea ?... 
    Thank you in advance.  

    SDR wrote:
    Xandrex, I am having the same problem (along with a few others).  I hate to sound like a novice, but how do I decompress into a folder other than temp?  Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
    Hello,
    I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
    What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
    You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
     http://www.7-zip.org/
    Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for