Error 1335 the cabinet file data4.cab is corrupt and cannot be used, what do i have to do

error 1335 teh cabinet file data4.cab is corrupt and cannot be used, what do i have to do

Hi Max210662,
Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .
Regards,
Romit Sinha

Similar Messages

  • Error 1335.The cabinet file 'Data1.cab' corrupt

    Acrobat Professional Design Failed. Could be network error, or problem with the package. Acrobat Professional Install Failed.
    I don't know what to do.
    I have uninstalled and re-installed the entire package and it is not working.
    Windows 7, 62 bit

    HI WatershedCenter,
    Please try the following link and advise if you were able to install the products or not.
    Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
    Cheers,
    Kartikay Sharma

  • Error 1335. The cabinet file "itunes.cab' is corrupt......

    I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is. iTunes would not open. It hope sof alleviting the problem, i unistalled itunes and quicktime and downloaded a new copy. Now I get the error message:
    Error 1335. The cabinet files 'iTunes.cab' required for this installation is corrup and cannot be used. This could indicate network error, and error reading from the CD-Rom of a problem with this package.
    No matter how i try to instal it, i get this message. I have chosen run and i also have downloaded to my machine and did it. Any ideas? iTunes worked find until this upgrade.

    I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is.
    odd thing to say. why do you think there's a difference in the level of reports of launch failure problems with 6.0.5.20, by comparison with 6.0.4.2, 6.0.3.5, 6.0.2.23, 6.0.1.3, 6.0.0.18, 5.0.1.4, 5.0.0.35 or 4.9?
    there's a link through to specific InstallShield advice on the 1335 in this document:
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    but if you get no joy with that, try the procedure from this Matthew Sliva post:
    Matthew Sliva: re: Error 1335 iPod.cab is corrupt

  • QuickTime.cab is corrupt and cannot be used.  Error code 2350

    I just bought a brand-new-in-a-box iPod - haven't even opened the box yet. I tried downloading/installing iTunes. I got the errors listed above.
    At first, I didn't even have QT installed so, I tried just downloading and installing QuickTime. That went fine.
    Then I tried (again) to install iTunes with the exact same result. I thought everything macintosh/apple was supposed to be just wonderful, bring about world peace, etc. Grrrrr....

    Try deleting the contents of your temp folder
    C:\Documents and Settings\<username>\Local Settings\Temp
    Then redownload the iTunesSetup.exe file.
    Does that work?

  • Error "QuickTime.cab" is corrupt and cannot be used

    i have searched this forum for help but they all say to download the windows cleaner which i did but when i tried to install it, it says
    Script: C:\DOCUME~1\Rhonda\LOCALS~1\TEMP\IXP000.TMP\StartMsi.vbs
    Line: 2
    Char: 1
    Error: The specified module could not be found.
    Code: 8007007E
    Source: (null_
    Does that make any sense to any one.. please help me i am so confused i have no idea what to do

    Try deleting the contents of your temp folder
    C:\Documents and Settings\<username>\Local Settings\Temp
    Then redownload the iTunesSetup.exe file.
    Does that work?

  • ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

    As the title indicates, I'm having this error during installation. It occurs when I try to install
    the "Management Studio" part of the program. I've tried a bunch of things like
    copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
    Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
    Please note:
    Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
    Any solution would be greatly appreciated.
    TIA

    I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
    I got the following error about 90% through the SQLServer2014_Developer install:
    >>> ===================================================================
    >>> SQL Server 2014
    >>> ===================================================================
    >>> TITLE: Microsoft SQL Server 2014 Setup
    >>> ------------------------------
    >>> The following error has occurred:
    >>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
    >>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    >>> For help, click:
    >>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
    >>> ------------------------------
    A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
      confirmed error still prelevant:
    C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
    >>> ...
    >>> Detailed results:
    >>>   Feature:                       Management Tools - Complete
    >>>   Status:                        Failed: see logs for details
    >>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    >>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
    >>>   Component name:                SQL Server Management Services
    >>>   Component error code:          1335
    >>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
    >>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
    from the CD-ROM, or a problem with this package.
    >>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
    >>>
    >>>   Feature:                       Management Tools - Basic
    >>>   Status:                        Failed: see logs for details
    >>>   Reason for failure:            An error occurred during the setup process of the feature.
    >>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
    >>>   Component name:                SQL Server Management Services
    >>>   Component error code:          1335
    >>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
    >>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
    from the CD-ROM, or a problem with this package.
    >>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
    >>> ...
    Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
    I noted that in the main there were x2 common themes.
    1. Problem with corruption the original download.
    --- Although I had not run the download checksum
    --- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
    --- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
    --- I figured the chances of us all having corruption of this one files were agaianst the odds and
    ---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
    While it was running ...
    2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
    --- This struck a chord
    --- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
    --- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
    What worked for me ...
    --- I decided to
    --- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
    --- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
    --- 3. Re-run the SQLServer2014 install using the repair mode.
    This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
    Hope this helps
    Andy

  • Installation error 1335. The cabinet file Data1.cab...

    Hi, I am not getting install Oracle 10g Express Edition, the following error occurs:
    "error 1335. The cabinet file Data1.cab required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROW, or a problem with this package"
    Please, someone can say what is this?
    Thank you

    I got the same 1335 error numerous times after trying various things noted in other '1335' .cab error posts in other forums.
    Believe it or not, the solution was easy for me: download the install .exe from Oracle using Internet Explorer (v8) vs. Firefox. I don't know why downloading using FF ended up with a corrupt .cab file every time (both the western and universal editions of XE), but using IE solved the problem.
    This was for the Windows install obviously.
    Hope this helps...

  • Error 1335. The cabinet file 'iTunes.cab' required for this installation is

    Ah! Please help! I am freaking out because I can not download the new iTunes becasue I get this message...
    "Error 1335. The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package"
    I am trying to download it directly from the site because I tried to play this song in my iTunes and it said it would not play unless I updated my iTunes.. So it took me to the iTunes website and I download it, save the iTunes Setup to my desktop and try to finish downloading or setting it up and at the end I get that message...
    What the deuce? Please please please help.
    Dominique.
    Toshiba...   Windows XP Pro  

    Search your hard drive for that file, 'iTunes.cab', and delete it. It's corrupted, no good.
    Then try to install iTunes again.

  • Error: the cabinet file required for this installation is corrupt and cannot be used.

    Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
     "the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
    At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
    Any help is appreciated! Thanx

    Hi Dazattack, I suggest you check the following KB article first:
    Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
    http://support.microsoft.com/kb/314810
    Note: Though it's for Office, some steps in the article can still be used in such scenario.
    Meanwhile, can you install other applications that downloaded from the Internet ?
    Sean Zhu - MSFT

  • "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
    tt2

  • Cabinet file itunes.cab is corrupt...

    I just got a new I Pod Nano (first time user) and I am trying to install itunes on Windows XP. Every time I try to install I get the message cabinet file itunes.cab is corrupt... I have tried downloading itunes again and it still comes up. Can anyone help me?

    I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is.
    odd thing to say. why do you think there's a difference in the level of reports of launch failure problems with 6.0.5.20, by comparison with 6.0.4.2, 6.0.3.5, 6.0.2.23, 6.0.1.3, 6.0.0.18, 5.0.1.4, 5.0.0.35 or 4.9?
    there's a link through to specific InstallShield advice on the 1335 in this document:
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    but if you get no joy with that, try the procedure from this Matthew Sliva post:
    Matthew Sliva: re: Error 1335 iPod.cab is corrupt

  • Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

    Hi there,
    I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
    instances.
    A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
    Currently both instances are running on same node.
    While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
    as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
    Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
    Please help resolve the issue.
    Thanks,
    AY

    Hello,
    I Confirm that I encountred the same problem when the first domain controller was dow !!
    During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
    When the firts DC restart finishied restarting every thing was Ok !
    The Question here : Why the cluster instance does'nt used the second DC ???
    Best Regards     
    J.K

  • I can't open the file in word because it is corrupt and cannot be opened, what can i do?

    I can't open the file in word because it is corrupt and cannot be opened, what can i do?

    I had a Word .doc that became corrupted while SpellChecking an entire vintage book that had been OCRed. Crashed every time I opened it in Word. I was able to open, strip off the Word Header & Footer (invisible), spell check and save as a plain text file with TextWrangler - BBEdit's Baby Brother > http://www.barebones.com/products/textwrangler/ - no Word-ish formatting, but the data was there in total.
    ÇÇÇ

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.

    Hello,
    I have gone through couple of posts regarding this issue but couldn't get the right solution. Could you please help what exactly we are missing here.
    Details:
    1) we have two SQL instances on one standalone machine (Default Instance (2008 SP3) + Named Instance (SQL 2012 SP1))
    2) Both instances are configured to accept SQL+ Windows authentication.
    3) when we give access to our users they are getting following exception if they connect with 'windows authentication'. (For both instances)
    Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
    Note: (Being a sys + windows admin I'm able to connect both the instances from same client machine without
    any issues)
    4) Also, we observed following error in windows application event log,
     SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.
    The logon attempt failed   [CLIENT: 192.168.xxx.xyx]
    5) If we create SQL login it is working fine without any issues.
    Could someone guide/help  me identifying and fixing this issue.
    Thank you

    Hello,
    Are those Windows Logins associated to domain Windows accounts? Windows Logins work for domain accounts and local Windows account created on the server where the SQL Server instance is installed (and used to login locally to the server).
    Could you try to delete one of the Windows logins that fail to login , and try to recreate them?
    The following resources may help:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/12/19/error-message-quot-login-failed-the-login-is-from-an-untrusted-domain-and-cannot-be-used-with-windows-authentication-quot.aspx
    http://support.microsoft.com/kb/555332
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

Maybe you are looking for