Error 1335. The cabinet file "itunes.cab' is corrupt......

I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is. iTunes would not open. It hope sof alleviting the problem, i unistalled itunes and quicktime and downloaded a new copy. Now I get the error message:
Error 1335. The cabinet files 'iTunes.cab' required for this installation is corrup and cannot be used. This could indicate network error, and error reading from the CD-Rom of a problem with this package.
No matter how i try to instal it, i get this message. I have chosen run and i also have downloaded to my machine and did it. Any ideas? iTunes worked find until this upgrade.

I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is.
odd thing to say. why do you think there's a difference in the level of reports of launch failure problems with 6.0.5.20, by comparison with 6.0.4.2, 6.0.3.5, 6.0.2.23, 6.0.1.3, 6.0.0.18, 5.0.1.4, 5.0.0.35 or 4.9?
there's a link through to specific InstallShield advice on the 1335 in this document:
Trouble installing iPod, iTunes, or QuickTime software in Windows
but if you get no joy with that, try the procedure from this Matthew Sliva post:
Matthew Sliva: re: Error 1335 iPod.cab is corrupt

Similar Messages

Error 1335 the cabinet file data4.cab is corrupt and cannot be used, what do i have to do

error 1335 teh cabinet file data4.cab is corrupt and cannot be used, what do i have to do

Hi Max210662,
Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .
Regards,
Romit Sinha

Error 1335.The cabinet file 'Data1.cab' corrupt

Acrobat Professional Design Failed. Could be network error, or problem with the package. Acrobat Professional Install Failed.
I don't know what to do.
I have uninstalled and re-installed the entire package and it is not working.
Windows 7, 62 bit

HI WatershedCenter,
Please try the following link and advise if you were able to install the products or not.
Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
Cheers,
Kartikay Sharma

Error 1335. The cabinet file 'iTunes.cab' required for this installation is

Ah! Please help! I am freaking out because I can not download the new iTunes becasue I get this message...
"Error 1335. The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package"
I am trying to download it directly from the site because I tried to play this song in my iTunes and it said it would not play unless I updated my iTunes.. So it took me to the iTunes website and I download it, save the iTunes Setup to my desktop and try to finish downloading or setting it up and at the end I get that message...
What the deuce? Please please please help.
Dominique.
Toshiba... Windows XP Pro

Search your hard drive for that file, 'iTunes.cab', and delete it. It's corrupted, no good.
Then try to install iTunes again.

"The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2

Cabinet file itunes.cab is corrupt...

I just got a new I Pod Nano (first time user) and I am trying to install itunes on Windows XP. Every time I try to install I get the message cabinet file itunes.cab is corrupt... I have tried downloading itunes again and it still comes up. Can anyone help me?

I was having the same problem that a lot of people are having after upgrading to 6.0 or whatever the new version is.
odd thing to say. why do you think there's a difference in the level of reports of launch failure problems with 6.0.5.20, by comparison with 6.0.4.2, 6.0.3.5, 6.0.2.23, 6.0.1.3, 6.0.0.18, 5.0.1.4, 5.0.0.35 or 4.9?
there's a link through to specific InstallShield advice on the 1335 in this document:
Trouble installing iPod, iTunes, or QuickTime software in Windows
but if you get no joy with that, try the procedure from this Matthew Sliva post:
Matthew Sliva: re: Error 1335 iPod.cab is corrupt

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Installation error 1335. The cabinet file Data1.cab...

Hi, I am not getting install Oracle 10g Express Edition, the following error occurs:
"error 1335. The cabinet file Data1.cab required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROW, or a problem with this package"
Please, someone can say what is this?
Thank you

I got the same 1335 error numerous times after trying various things noted in other '1335' .cab error posts in other forums.
Believe it or not, the solution was easy for me: download the install .exe from Oracle using Internet Explorer (v8) vs. Firefox. I don't know why downloading using FF ended up with a corrupt .cab file every time (both the western and universal editions of XE), but using IE solved the problem.
This was for the Windows install obviously.
Hope this helps...

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

Corrupt cabinet file - QuickTime.cab - error code 2350

I've attempted to install itunes many times without success. Each time I get a message "cabinet file Quicktime.cab is corrupt and cannot be used. Error code 2350". The installation process then stops and reverses all changes. I've tried troubleshooting - uninstalling QuickTime, installing script files for XP, deleting temp folders, etc without success. I've even downloaded the original zip file of itunes several times without avail. Any ideas?

I have the same problem. Everytime I try to download ITunes 7.0 I get a Cabinet File Error that says "itunes.cab' file is corrupt and cannot be used. It reads error 2350 and will not let me install the itunes setup. I have also tried to uninstall and retry but have no luck. If you have any luck please email me at [email protected] I am thinking it might be because I still have AOL dialup and maybe need to get cable or DSL. But I am not sure.

I can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'

i can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package! please help!!!!!

“the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Error 1335 'itunes.cab' is corrupt.

I can't finish the install of the new version of iTunes because of an error 1335. I tried downloading the install package a second time to see if maybe there was just a problem during the download, but no dice. Any ideas?
--d

Exactly the same problem. error 1335 iTunes.cab is corrupted.
Solution: uninstall Quicktime and delete all the iTunes files that iTunes uninstaller fails to delete.
1. Control Panel -> Add/remove programs -> Quicktime -> uninstall
2. Rt click on START and select "Search...". Search for "iTunes". (include advanced: hidden and system files). Delete every file found except the Library ones and the folders.
3. Shutdown / Restart
4. Download iTunes 6 again. and Install.
I also downloaded an update to Windows Installer from the microsoft site again, as there was a problem with the version from SP2.
Good luck

When try to install on windows: Error 1330: cabinet file data1.cab invalid

I'm trying to install Java 6 build 13 on a windows XP computer. It gives me the error:
Error 1330: A file that is required cannot be installed because the cabinet file "C:\...\Data1.cab" has an invalid signature. This may indicate that the cabinet file is corrupt.
Apparently this is an old bug ( http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6596573 ) but it's still occurring and not just for me. I need to be able to do offline install (which is what causes this issue). Does anyone know how I can get/create a working installer for offline install that doesn't have this issue?

Hi,
When install Windows on UEFI mode, you need to convert your disk to GPT firstly. Therefore, please check if your disk was already converted to GPT partition style.
On the other hand, you can access to the link below which talking about how to install Windows using UEFI partition style.
https://technet.microsoft.com/en-us/library/dn336946.aspx?f=255&MSPPError=-2147217396
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When updating my ipod as prompted I now get error on my laptop --Runtime Error Prog:C:\Prog Files\iTunes.exe R6034. An application has made an attempt to load the c Runtime Library incorrectly.Please contact applicant support.

When updating my ipod I as prompted got message on my laptop----Runtime Error Prog: C:\Prog Files\iTunes.exe R6034 An applicationhas made an attempt to load the C Runtime Library incorrectly. Please contact support. Error 7(Windowserror 1114)

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99833)

HT1933 I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix

I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix it?

Have you moved or deleted those tracks on your computer (the gift card has got nothing to do with it) ?
You might be able to re-download them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes (re-downloading isn't possible in all countries) - if those songs appear there then delete the entries from your iTunes library (where you are clicking on them to play them and gettinf the 'original file' error), and they should then get a cloud symbol against them for re-downloading.
If they don't appear in that link then have you got them on, for example, an external drive ?

Error 1335. The cabinet file "itunes.cab' is corrupt......

Similar Messages

Maybe you are looking for