Error 1394 on Cisco Unity 5.1
Can anyone help me with the below error message? This happens about 15 times a day or more on the Unity 5.1 system. By the way... I don't have an H:\ drive on the system that is referenced in this error - this was a canned install off of the DVD. I have 2 partitions - 20 GB and 180 GB or so. Drives C: and D: on the two partitions.
Thanks in advance!!!
The description for Event ID ( 1394 ) in Source ( CiscoUnity_ConvSub ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [EvaluateUserInput_LN] Failed in call to PutSelectioInNamedProps_LN() hr=0x80004005 File: H:\views\CUESB1_view\un_Conv1\Scripted\ConvSub\ListNames.cpp Line: 3216, 3216, H:\views\CUESB1_view\un_Conv1\Scripted\ConvSub\ListNames.cpp,
Basically this error applies to 4.X, 5.X and 7.X Unity versions and it is generated if a user hangs up before recording, and therefore it is harmless.
Similar Messages
-
Error during upgrading Cisco Unity Connection to SU2
Help!
I'm facing an error while upgrading Cisco Unity Connection 8.5.1.10000-26 to SU2 (8.5.1.12900-7).
When it's trying to download the SU2 file (UCSInstall_UCOS_8.5.1.12900-7.sgn.iso ) to Unity Connection after 2GB I get this error:
Error encountered: Upgrade has detected that the ISO file name has been changed from the original name. This is not allowed. MD5 Hash Value: 32:32:db:47:99:48:c6:53:12:e2:78:76:94:90:a4:1d
I tried this from multlpe FTP servers and I downloaded the SU2 file multlpe times assuming the download was bad. I also rebooted the Unity Connection server here and there assuming it was something with the server.
I first tried SU1, but that gave the same error, so I attempted to go with SU2.
Any ideas for resolving this?
Thank you!
-ryaHi Rya,
OK...well you've certainly done your due diligence here
Did you run an MD5 check after the download to compare the file values?
I had a long look for bugs related to this issue and came up empty so I can't see
a bug being the cause of the issues here. Is it possible for you to try "burning" the
upgrade .iso to a DVD and trying again?
I am also curious why you wouldn't move straight to 8.5(1)SU4
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen -
Error para instalar Cisco Unity en ISM
Hola que tal este es mi primer post y esque necesito ayuda relacionada con la instalacion del cisco unity en un ism pero me manda un msj de error seguido sm-install-6-inst-rbip:ism 0/0 receive msg:RBIP registration recordos. cual seria la causa de este mensaje y como puedo solucionarlo? gracias de antemano
vera necesito instalar el cisco unity en el modulo ISM pero al tratar de instalarlo con el ccp este no termina de hacerlo y checando el estado de por linea de comando me arroga el siguiente error
"sm-install-6-inst-rbip:ism 0/0 receive msg:RBIP registration records."
Nov 7 18:18:34.219: %SM_INSTALL-3-INST_SCRIPT_FAIL: Execution of script cue-vm-k9.sme.8.6.1.pkg.install.sre failed, installation aborted
estube investigando y creo que el problema puede ser fisico , alguien sabe algo al respecto ? -
Cisco Unity Connection 8.6 problem with greeting upload
Hello at all,
i have a realy strange Problem.
I want to upload a Greeting (*.wav-file) to a Call Handler, everything looks fine after uploading and i can also hear (Playback) the massage on the Computer and on my Phone. So i save the Config. After that i want to hear the massage after calling the Call Handler but i hear only "sorry, "CallHandlerName" is not Awailable".
If i make some checks everything looks ok, i have 2 User with sysadmin-role - both can Playback the massage via the Webpage.
But if i take the Phone and call the "Greetings Administrator" - there is no personal Greeting on this Call Handler - and thats my Problem.
If i Record a new massage with the Phone (in the Greeting Admin) it is working - after Uploading a new File (Codec is ok) i can Playback the new file but after Calling the CH, i hear the Massage which i have recordet with the Phone - not the Uploadet. But on the Webpage i hear the Uploadet file.....
Whats wrong????
And yes, i have set this 2 Users as Call Handler Owner.
What should i do??
Please can anyone help me in this case.....
kind regards
Markus
EDIT: I have also the Problem, that i can´t upload a File for a User - only the User self can Upload a Greeting, if do this with one of the 2 Admin-Accounts i hear also the System-Massage "sorry, -USERNAME- is not awailaible" and not the uploadet file - at the Webpage i hear the uploadet Massage - it seems to be the same Prob as with the CallHandler. Is it a JAVA-Problem mabye? I have Java JRE Version7 update7 installed and IE8 as Browser....
Certificate is installed, and the CUC is a trusted site......Hi Markus,
It could be this bug;
CSCto92753 - Unable to upload wav files and save as greeting or send as message
Description
Symptom:
Unable to upload an existing wav file, or create a new recording using the PC microphone and save as greeting, voice name, or send as message. In the case of trying to send as a message, the user receives a "Failed to Send Message" error.
You might see Failed to Record Name if attempting to overwrite a Call Handler with a file.
You might also see Unable to save recording due to SSL certificate error.
Conditions:
Cisco Unity Connection versions 7.1(5)ES45, 8.0(3)ES27, 8.5(1)ES37
When using either the Cisco Unity Connection Administration (CUCA) or the Cisco Unity Connection Personal Communications Assistant (PCA) web applications to upload an existing wav file, or create a new recording using the PC microphone and save as a voice name, greeting, or send as a message.
In the client side Java Console logs, you see the following exception:
Exception in thread "Timeout guard" java.security.AccessControlException: access denied (java.net.SocketPermission 10.93.231.234:8443 connect,resolve)
Workaround:
In your client side JRE security profile file....commonly named: java.policy...add the below entry. Will need to use the ipaddress of the Connection server (for a cluster, put an entry for each of publisher and subscriber).
permission java.net.SocketPermission "10.93.237.101:8443", "connect,resolve";
If get a permission error when trying to modify java.policy, then you may need to set the permissions of the file to not inhearent permissions from it's parent and not be read-only. (aka by default the entire JRE folder is read-only but you need to modify a file within it).
A good article on the Sun website with more detail on the workaround: http://java.sun.com/developer/onlineTraining/Programming/JDCBook/appA.html
Details
First Found in: (4)
8.6,7.1(5)ES44,8.0(3)ES27
8.5(1)ES37
Status:
Terminated
Last Modified:
Aug 12,2012
Product:
Cisco Unity Connection
Platform:
Dependent
Severity:
3 - moderate
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan -
When I call into CUGA (Cisco Unity Greetings Administrator), I get a failsafe message and the system hangs up. The below events are written in EventViewer. GUSI and AvCsMgr Diags attached.
Any help would be much appreciated.
Event Type: Error
Event Source: CiscoUnity_Miu
Event Category: Error
Event ID: 531
Date: 5/28/2011
Time: 5:23:51 PM
User: N/A
Computer: NYLCNJUN01
Description:
Cisco Unity's telephony component has encountered a serious error.
EXPLANATION:
A serious failure has occurred on port 53 while trying to open a wav file or stream. Depending upon the severity of the failure, parties on this call could experience unexpected behavior or be disconnected. In some cases, further calls on this port will not be handled correctly.
TECHNICAL DETAILS:
Thread 0x00002220 had a failure on port 53 in method CAvMiuWave::GetLength()
DESCRIPTION: AvWav WavOpenEx2 failed with 0x00000000.
DETAILS:
FileName: Welcome.
CALLINFO:
CallerID: 2003406
CalledID: 3007910
RedirectingID: 3007910
Origin: Internal
Reason: FwdUncond
Trunk: 0.
CALL SEQUENCE:
[15:17:29:794 - 0x00002100] Drop() - S_OK
[17:23:51:209 - 0x00001D6C] LINE_APPNEWCALL(0x000115D3)
[17:23:51:209 - 0x00001D6C] SetEvent(NewCall)
[17:23:51:209 - 0x00001D6C] SetEvent(CallInfoArrived)
[17:23:51:302 - 0x00002220] Answer() entered
[17:23:51:302 - 0x00002220] lineAnswer(0x000115D3) - 0x00011439
[17:23:51:302 - 0x00001D6C] LINE_REPLY(0x00011439 | 0x00000000)
[17:23:51:427 - 0x00001D6C] StopIO(TERM_REPLAY) entered
[17:23:51:427 - 0x00001D6C] StopIO(TERM_REPLAY) - S_OK
[17:23:51:427 - 0x00001D6C] LINECALLSTATE_CONNECTED(0x000115D3 | Active)
[17:23:51:427 - 0x00002220] WaitFor(0x00011439 | CONNECTED) - CONNECTED
[17:23:51:427 - 0x00002220] Answer() - S_MIU_CONNECTED
[17:23:51:427 - 0x00002220] GetMediaLength() entered
[17:23:51:427 - 0x00002220] WavOpen(Welcome) - 0x00000000
[17:23:51:427 - 0x00002220] GetMediaLength() - 0 | E_FAIL
[17:23:51:427 - 0x00002220] Play() entered
[17:23:51:443 - 0x00002220] WavOpen(Welcome) - 0x00000000.
Event Type: Error
Event Source: CiscoUnity_Wav
Event Category: Error
Event ID: 807
Date: 5/28/2011
Time: 5:23:51 PM
User: N/A
Computer: NYLCNJUN01
Description:
Cisco Unity's multi-media component has encountered a serious error.
EXPLANATION:
A serious failure has occurred on port 53 while opening an audio stream. Depending upon the severity of the failure, parties on this call could experience unexpected behavior or be disconnected. In some cases, further calls on this port will not be handled correctly.
TECHNICAL DETAILS:
Thread 0x00002220 had a Failure on Port 53 in AvWav
DESCRIPTION:
File: H:\views\CUESB1_view\un_Miu\UnityAvWav\WAV.cpp(1095)
Method: WavOpenEx
Failure: call to mmioOpen(Welcome) failed(101).Tommer,
I found the issue that caused problem.
One of the Unity Admins (hand slapped) used RDP in Console mode which redirected the custom wave driver. This is a known issue with using RDP in Console mode in Windows 2003. There is a MS Hotfix 928046 that should have prevented this from happenning, but it was alraedy installed. A Server reboot cleared the condition and its all working again.
Thanks for the reply. -
Failure to upgrade Cisco Unity Connection 8.6.2 to 9.1.2
Hi everybody.
Has someone that can help me with follow problem?
I making a Cisco Unity Connection upgrade from version: 8.6.2.20000-76 to 9.1.2.10000-28. But unfortunately we can't sucessfull to make this process.
On the finish of this process, I can see this outup error:
11/23/2013 12:28:55 upgrade_manager.sh|Cleanup exiting - Cached Data: [Vendor= VMware, Inc.
HWModel=VMware
CPUCount=2
CPUType= Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
CPUSpeed=3300
MEMSize=6144
BIOSVer=PhoenixTechnologiesLTD 6.00 06/22/2012
ObjectId=1.3.6.1.4.1.9.1.1348
OSVersion=UCOS 5.0.0.0-2
SerialNumber= VMware-56 4d e0 4f 4d 85 87 7b-eb 22 0e 52 a7 73 1a 22
VendorOID=1.3.6.1.4.1.674]|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleaning up download...|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
11/23/2013 12:28:55 upgrade_install.sh|Removing /common/download/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Started auditd...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|IOWAIT monitor stopped|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|<LVL::Error>
11/23/2013 12:29:00 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 14477).|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 14477)|<LVL::Debug>
Best Regards,
Claudio Costa
A mensagem foi editada por: Claudio CostaTks Manish, I just perform a restart on the both nodes on my CUC cluster and after that I did can install this upgrade patch.
Also is very important install the upgrade patch on all servers of the cluster before perform a switch-version on the publisher and then on the others nodes.
Best Regards,
Claudio Costa -
Error Adding user to Unity Connection 7.0.1
Hi,
I have cisco unity connection installed on standalone machine, when i try to add any user i receive error on the attached picture.
How can i solve this issue.
ThanksThe password credentials - either web or voicemail - conflict with the rules in the Authentication Rule(s) applied at the Subscriber Template and/or individual user level. If you have the "Check for trivial passwords" flag checked then your password cannot be generic strings like 123456 or passwords with repeating characters such as 112233 or even aabbccdd - they are considered easy to hack. Either assign new initial passwords or change the Authentication Rules and I suspect your issue will go away.
Hailey
Please rate helpful posts! -
Hi,
In my "Cisco Unity 4.2 Build 4.2(1)" installation, I can log-in to the cunity1 server (the server with the Cisco Unity 4.2.(1) installed), and on the server, I can open the web-page: http://cunity1/Web/SA/Default.htm, this page opens the page: http://cunity1/Web/SA/FrameASP/StartFrame.asp?CookieCheck=1.
This page I use to administrate the voicemails.
When I try to open this web page on my client computer (Internet Explorer 7.0), I get the following error message:
http://cunity1/Web/SA/FrameASP/StartFrame.asp?CookieCheck=1
Missing live session flag.
For some reason, /web/global.asa did not fire.
Check that this file is present.
This problem could also be related to DNS issues.
Cannot continue.
If I use a refresh on this page, I get this:
Microsoft VBScript runtime error '800a01a8'
Object required: '[undefined]'
/Web/Common/include/SaConstInc.asp, line 9
http://cunity1/Web/SA/Default.htm
Server.CreateObject(AvSaLocalization.AvSaLocalization.1) failed.
This is most likely an error with a DLL, probably AvSaLocalizationSvr.dll or perhaps AvSaLocaleInfoSvr.dll.
Check that these files are present, and registered with REGSVR32.
Also be sure that the appropriate MsgStoreRes.dll file is present.
Cannot continue.
(From: Global.asa: hr=0x80070005)
If I use a refresh on this page, I get this:
error '80004005'
/Web/Common/include/SaLocalizationInc.asp, line 35
What do I need to do, before I can open the web page on my client computer, and administrate the voicemails?
Kind regards,
Carl-MariusHave you tried registering the DLLs mentioned? Can you ping cunity1? Does it resolve to the correct IP address? Can you access the Unity SA by using the IP address instead of the hostname? See the following link for SA Web troubleshooting steps.
https://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00801ba0ef.shtml
Hope this helps.
Brandon -
Installed Cisco Unity 7 on Windows Server 2000 and Unity Server is on Domain,and Exchange we are using is Exhcnage 2007. When we reach at Message Store Wizard it is showing some error at the end that " Failed reaching for Unity in Active Directory Global Catalog. The SVR Record may be missing in DNS Table" . It shows when we slected Exchange in Process and the Selected Storage Group. And the it takes time and then shows error. Please try to resolve this issue soon, we need this solution urgently. We have already spent several days on different issues regarding Unity.
If you need to talk regarding this matter, Please contact on +919780660619, and the conatct person name is Manav.
Thanks in Advance
RosyRosy,
We cannot call you from this forum. If you truly need a call, you can open a TAC case. The info I can tell you is that you need to fix this in your dns. A simple google search of "no SRV record Windows 2000 server" comes up with numerous resources that can help you fix this. Here is just one example.
http://support.microsoft.com/kb/241505
and
http://www.petri.co.il/active_directory_srv_records.htm
I would also advise you, if you are doing a new install with Unity 7 and that version of Exchange, that you use Windows 2003 as the OS. Even MS doesn't support Windows 2000 Server any more so if you end up having an OS issue on your Unity server, we will not be able to get MS to help you. From a support perspective, I would advise you to use Windows 2003 Server in this implimentation.
Thanks!
Tray -
Cisco Unity Express and CUCM 6.1
Hi there,
I'm trying to configure CUE. On the configruation page I entered the "Web User Name" and "JTAPI User Name". The "JTAPI User Name" login is successful while I get an error message that "Web User Name" login has failed. I've tried to make another "Web User Name" on the CUCM 6.1 but it didn't help. I can ping the CUCM 6.1 from the Cisco Unity engine.
Can anyone give me a hint how I can tackle this issue?
Thanks.have a look at the following link which is helpful for ur config :
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml
good luck
if helpful Rate -
Cisco Unity Connection 8.6 - Cannot Upload Greeting
Hello! I am running Unity Connection 8.6, using VMWare, in my home lab. When I try to upload a greeting to my System Call Handler, I get the following:
Unable to save recording due to SSL Certificate error. Would you like to accept the SSL certificate for this session and attempt to save the recording again?
When I choose OK I receive:
Failed to record name
Site: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity-connection-version-70/110950-unity-wav-issues.html#certerr
I visited the above site and tried importing the certificate into both Firefox and IE, but that did not seem to work. I also looked into Cisco Bug ID CSCto92753, but that also did not work. I looked at the Java Console Log and did a search for "access denied":
com.cisco.unity.mediamaster.MMApplet.stop() - Exception while saving preferences: access denied ("java.io.FilePermission" "C:\Users\Lalo\.cisco\unity\mediamaster\mm.properties" "read")
I modified my java.policy file to include the below, but I get the same error:
grant codeBase "file:${{java.ext.dirs}}/*" {
permission java.security.AllPermission;
permission java.io.FilePermission "C:\Users\Lalo\.cisco\unity\mediamaster\mm.properties", "write";
At this point and I am stuck. Thanks in advance for reading my post and for your assistance.
Cisco Unity Connection version: 8.6.2ES120.24901-120
Windows 7 Enterprise 32-bit
Browsers: Firefox 28.0 and IE 9
Java Version 7 Update 55 (Also tried Java Runtime Environment 1.6.0.39)I ran in to these same symptoms and have been fighting it for a while. I have not ultimately found a solution but I found the following workaround which allowed me to get my greetings uploaded until a better solution can be found. I am posting it here in case it might work for others in a pinch.
Workaround:
Open the mediamaster applet on the appropriate page and choose to open file
browse to and select the greeting you want to upload
BEFORE clicking save, click the play button in the mediamaster (I have mine set to play via phone, I didn't test via computer). The file uploads and plays.
Then click save. For some reason, this seems to have properly uploaded the greeting without any errors.
I hope this is helpful to someone who is running in to this same frustrating error.
Jon -
Cisco Unity Express 8 settings for VM to Email O365
At my current location we are using Cisco Unity and I have it configured correctly with Office 365 to allow users VM to be sent to their email. At a new office being set up, they opted to use Cisco Unity Express. Now CUE does not have the same settings to connect directly to the hosted exchagne server that CU does. CUE is wanting SMTP connection info. We have CUE working fine with a GMail account for testing, but when we try to use the settings given my MS for SMTP we get an error that we cannot connect to the SMTP server?
Server: *.outlook.com
SSL, port 587
User: same user account we use for CU [email protected] and same passoword.
I have been reading that CUE is compatible with O365 and the above should be correct. Am I missing something?In order to support TTLS/SSL you need CUE 8.6:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/administrator/AA_and_VM/guide/syscmp.html#wp1014185
Also, there is a limitation on what hosted Email Servers, CUE can use:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#wp364157
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers. -
Cisco Unity Connection cluster issue
Hello,
I have a Cisco Untiy Connection cluster of two servers, one publisher and one subscriber. They are running software: 7.1.3ES43.33034-43. Yesterday at about 8:43 I lost connection to the subscriber server. I could still ping it but was unable to get to it via GUI nor SSH. I spoke to TAC yesterday and they told me to simply reboot the server. I was a little concerned about this because I don't want to cause some kind of split-brain effect. I work in a hospital and it is imperative that the voicemail system stay up. My only other option would be to do this at 4:00 am on a Sunday. Any suggestions?
ThanksHi David and all,
we have a unity connection 9.x pair. after an IP address change on the subscriber we are getting the error message:
‘Communication is not functioning correctly between the servers in the Cisco Unity Connection cluster’
Both servers respectively show its own status as a publisher but lost communication with the other server (if we check cluster management from either server).
show tech network hosts – displays correct info.
show perf query class "Number of Replicates Created and State of Replication"
==>query class :
- Perf class (Number of Replicates Created and State of Replication) has instances and values:
ReplicateCount -> Number of Replicates Created = 603
ReplicateCount -> Replicate_State = 2
On both servers the replication is showing as 2 – so its good.
Various reboots have been done, services are up and working and there are no firewalls between server’s .
Any advice appreciated.
TIA…Jeff -
al realizar la actualización presenta un error 1394, o 3, o 3004, todoo eso me ha ocurrido
Basically this error applies to 4.X, 5.X and 7.X Unity versions and it is generated if a user hangs up before recording, and therefore it is harmless.
-
Cisco Unity Connection : Web Inbox
Hi
We are using Cisco Unity Connection (Ver 8.5.1ES47.12900-47), we have configured a Web Inbox manually for a User. It was working fine till yesterday , but from yesterday when the user logs in the Web Inbox the browser window just shows that its loading (Please see the attached screenshot) and nothing happens. We have reset the password of the Web Inbox user thinking that its encountering a known Bug, but it did not fix the issue.
We tried logging in with IE 11, Firefox and Chrome, we restarted the Cisco Tomcat service, but it still did not fix the issue. Please see the attached screen-shot for the error encountered.
Your inputs to resolve this issue are appreciated.
Thanks and Regards,
Ram.Its most likely a compatibility issue. IE 11 is not supported for WebInbox with CUC 8.5,
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/cucclientmtx.html
If you still face issue, you can open a TAC case. This will require detailed log analysis.
Maybe you are looking for
-
Getting error in SAP Authentication configuration for BO Edge 3.1 SP3
Hi, I have installed BusinessObject Edge Series 3.1 SP3 and BusinessObject XI 3.1 SAP SP3 on Windows 2008 server. I am trying to configure SAP Authentication between BO and BI server. In CMC i have provided all the details under Entitlement System an
-
Hi, With the following requirement,how can we configure p.o release strategy? Client requirement is that he wants one release strategy with parameters plant and p.o type are the characters. And one more release strategy will be based on only purchase
-
How do I fix DVD recorder error 69889 on mac
What does error 69889 mean on DVD Recorder on a Mac
-
How to make bookmarked webpages available offline? Like in Internet Explorer?
I wanted to make the webpages I bookmarked available offline. I could do this in the Internet Explorer by simply tweaking some of the bookmarks options. But I'm not able to do it in Firefox. Could please anyone help me? Thanks in advance.
-
Hazardous / Dangerous Material information in GTS
Hi Experts, We are currently configuring AES reporting in GTS. For AES reporting, it is mandatory to update hazardous / dangerous material status. In standard SAP, Dangerous material indicator is passed from R/3. Can anyone advise where this inform