Error 1406... any help?

Have been trying to load up the start-up disk, mid-setup (without my iPod plugged in) I get an error 1406 "could not write value street2 to key /softwear/Apple Computer, Inc./iPod/UserReg2."
Did all the troubleshooting suggestions;
admin access - got it
updated to XP SP2 (includes installer 3.0)
emptied temp directory
uninstalled old versions of quicktime and itunes
except editing my registry files. Don't want to get into that unless it is necessary.
Any suggestions? I would like to use my B-day present sometime this year.

So i am answering my own problem,in the hopes that it will help someone else.
I got help from a very patient cousin who loaded everything up on her Dell. When the error messg popped up AGAIN, there were the choices to cancel or ignore... so we tried the ignore, and it worked. I tried it on mine and it worked too.
Now if i can only get the thing to actually play the music that was sucessfully downloaded, i would be a happy and relieved girl.

Similar Messages

HT4796 After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

Welcome to the Apple Support Communities
Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly

I am trying to update the extension manager 6.0.8 i am getting an error u44m1p7 any help with that pls

i am trying to update the extension manager 6.0,8 i get an error (u44m1p7) any help with this issue please

That the CS6 version
Extension Manager 6.0.8 update
December 10, 2013
Macintosh | Windows
Photoshop: Basic Troubleshooting steps to fix most issues
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

I am trying to restore my iphone 3gs to 6.1.3 but i get an error (1618) any help?

i am trying to restore my iphone 3gs to 6.1.3 but i get an error (1618) any help?

Hey CALLMEALEX,
Thanks for the question. I understand you are experiencing issues restoring your iPhone 3GS to iOS 6.1.3, the following article may assist you in resolving this issue:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Thanks,
Matt M.

Problem: ipod server could not be contacted, i went to control panel, lan settings, ck'd auto detect and went back to i-tune to update and got the same error message, any help is appreciated

Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221

See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.

HT201210 Error (-1) any help or ideas?

Hi There
Trying to update, goes as far as verifying Firmware, then just crashes and says error (-1) any help or ideas?.. Am using an iPhone 4..
Thanks..

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Error -25262 - any help here?

I google'd it and came up with nothing.
Basically, put in a new hard drive into my laptop and everything is fine, moved everything over including the itunes folder. It sees my music but does not allow me to authorize my computer or even allow me to sign in. When I try, I get the above error.
Any help please?

Sounds like an issue with your browser settings, not the site. Also, this is not the proper forum for posting a technical question about the site itself.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

TS4185 When starting Facetime on my MAcBook Pro I receive "internal error? any help?

When I start Facetime on my MacBook Pro I receive "internal error. You need to quit and reopen Facetime". I do this and nothing changes, same error. Any ideas are welcome.

Found this and it worked:
Netdude21
Re: "An internal FaceTime error occurred. There was a problem with FaceTime. "
Mar 28, 2011 11:14 AM (in response to iannuz86)
I have a solution for your problem, it took a little investigating and work to get FaceTime for Mac working. Here's what I did: Go to the folder /Applications then right click on FaceTime.app go into /Contents/LaunchAgents and look for two files "com.apple.imagent.plist" and "com.apple.apsd-ft.plist" and copy them into your /Home/yourusername/Library/LaunchAgents. If you can't find "com.apple.apsd-ft.plist" do a Google search for it and download it, the name will be "com.apple.apsd.plist.txt", do a cmd-I on it and rename it "com.apple.apsd-ft.plist" put this file in the same folder as "com.imagent.plist", launch FaceTime and if your webcam lights up, your good to go.
Hope this helps.

TS3694 Tried to restore my IPOD and keep getting 1604 errors. Any help?

I haven't updated my ipod in 3 years because it was such a pain last time I did it and thankfully it came back. But I foolishly attempted it again and now after it was put in the restore mode and Itunes attemps to restore the device I get an error message with 1604. I have gone through the troubleshooting steps, tried different USB ports and get the same result. Any help?

If as the artical says, uyou tried another computer and another network then make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Iphone Restore Problem (Error 1011) Any Help?

I am (was?) the proud owner of a 25 day old iPhone. Yesterday I got the "unable to make calls need repair" message. I've been trying for hours to get my phone to recover using itunes. It downloads all the all the firmware (version 1.1.4) but just as it is about to finish I get a message
The iPhone could not be restored, error 1011.
Any help/suggestions?
Thanks!

we might not be thinking of the same notification. when your fone is in sleep mode and you press the sleep/wake button on top, do u always see a message that says something along "Your iPhone cannot make/recieve call. Please visit www.apple.com/support" (Emphasis on that last part.) have you contacted apple? have you reset your iphone. have you tried restarting your iphone (probably) have you tried to restore ion a different computer? i would try all of these before calling apple bc most likely that is what they will have you do.
i hope im to some help =]
bryan

Error Message - Any Help

Hi need help, keep getting this message when trying to uplaod onto my Shuffle.
"The Ipod "Sean P McMahon's ipod" cannot be updated. The disk couldn't be read from or written to"
Any help would be great. Going crazy with having to hear kids on the bus.

I am getting the same type of problem and this is what I think happened with mine (this is my second it was warrantied in early August although the website states I have expired my 90 free chane for support but not according to my math...)
anyway I have a Mac Mini at home and get my music synced from there the iPod shuffle was at my office and I ran the battery down by accident, so I thought when I purchased the unit it said I could charge from "any" usb port so I hooked it up to my work PC that has iTunes on it and the computer stated it did not recognize the device and therefore would delete all data, I have reset the unit, tried to update it but now the Mac says it is an unrecognized unreadable disc and I have tried to run daignostics where it states the unit is an iPod with like 900MB of info but it says it can not do anything- so I can't even use the iPod updater...- any suggestions at all out there I have looked up any topic I thought fit and none of those seem to fit but this one....

Make and relink errors .. any help ???

Thanks to Thomas Gutzman, atlast I was successful to start
orainst.cm and start to install. But now the installation was
not successful, with the following errors:
(1) The TNS listener executables were not linked. check log file
(2) Error during 'relinking wrap executables...'
(3) Relinking error for Trace. check log file.
(4) Relinking error. The executables for Oracle8 Std (RDBMS)
were not made successfully. please check log file.
In the $ORACLE_HOME/orainst/make.log file,
Following error messages have been identified.
(a) $ORACLE_HOME/bin/gennttab: $ORACLE_HOME/bin/get_platform: No
such file or directory
(b) $ORACLE_HOME/bin/gennfgt: $ORACLE_HOME/bin/get_platform: No
such file or directory
(c) /usr/i-386/bin/ld: can not open -lnsl: No such file or
directory.
More than one occurance of error (a) and (c) happened. I do not
know what to do.
CAN ANYONE HELP ME OUT ?
Thanks in advance
Satya S Kolachina
null

Thomas Gutzmann (guest) wrote:
: Satya S Kolachina (guest) wrote:
: : Thanks to Thomas Gutzman, atlast I was successful to start
: : orainst.cm and start to install. But now the installation was
: : not successful, with the following errors:
: : (1) The TNS listener executables were not linked. check log
: file
: : (2) Error during 'relinking wrap executables...'
: : (3) Relinking error for Trace. check log file.
: : (4) Relinking error. The executables for Oracle8 Std (RDBMS)
: : were not made successfully. please check log file.
: : In the $ORACLE_HOME/orainst/make.log file,
: : Following error messages have been identified.
: : (a) $ORACLE_HOME/bin/gennttab: $ORACLE_HOME/bin/get_platform:
: No
: : such file or directory
: : (b) $ORACLE_HOME/bin/gennfgt: $ORACLE_HOME/bin/get_platform:
No
: : such file or directory
: : (c) /usr/i-386/bin/ld: can not open -lnsl: No such file or
: : directory.
: : More than one occurance of error (a) and (c) happened. I do
not
: : know what to do.
: : CAN ANYONE HELP ME OUT ?
: : Thanks in advance
: : Satya S Kolachina
: Satya,
: sorry, I made a mistake; you're right, it only helped one step
: ahead. Thanks to a contribution from Lawrence Simela I was able
: to find the correct way: it must be the development version of
: glibc.
: Please try:
: 1. connect to ftp.tu-chemnitz.de
: 2. cd to
/pub/linux/redhat-ftp/redhat/redhat-5.2/i386/RedHat/RPMS
: 3. download glibc-devel-2.0.7-29.i386.rpm
: in binary (image) mode.
: 4. install/replace the package as root by entering:
: rpm -ivh --replacefiles glibc-devel-2.0.7-29.i386.rpm
: If you had installed glibc-2.0.7-29.i386.rpm, as I had written
in
: my note, or if you get an error regarding /sbin/install-info,
you
: may better try
: 4. rpm -ivh nodeps replacefiles
glibc-devel-2.0.7-29.i386.rpm
: Someone wrote that it's enough to touch /sbin/install-info so
it
: just exists, but that didn't help much. I had to use --nodeps.
: It looks as if the link /usr/src/linux points to the wrong
: directory afterwards. You should redirect it to the older
: version, otherwise you cannot build a new kernel. I did not yet
: check if any of the new files have to be moved prior to
building
: a new kernel.
: Interestingly I got a nasty error message saying something like
: "An operating system error occurred while trying to spawn
: '/home/oracle/bin/otrccref' while redirecting output to
: 'h^^^^'."
: This could be fixed by backing up /bin/sh and replacing it by
: /bin/ksh (temporarily, before starting orainst, switching it
back
: afterwards).
: The current status at my system is that I get a memory fault
when
: running svrmgrl, but my guess is that this is due to the fact
: that I had not set the kernel parameters correctly, but before
I
: go an try to build the kernel I will reinstall the system,
having
: fiddled around so much.
: It would be great if someone with better insight into the
psyche
: of Linux would comment on this.
: K
I'm getting this same message on a Linux Slackware 3.6 machine.
Can't seem to figure it out.
null

Error 1439 any help??

My iPod became suddenly "corrupted" - don't know why. Then when I tried to restire it, the error 1439 appeared. Is it dead???

Dont give up (yet)
but to be of any assistance, please provide more info,
Which version of iTunes are you using?
What is your iPod firmware number?
How old is you iPod?
Read this Apple Support Article which may help you
http://support.apple.com/kb/TS1372
Let me know how it goes, if you need more help.

IPhone shuts off when I use the internet on the 3G network & I can't upgrade/restore because of network connection error. Any Help?

A few months ago, while on the 3G network, my iPhone 3GS starting turning off randomly when I was using safari or an online app and the battery was somewhere around 5-20%. When this happened the only way to get the phone back on was by fully charging it which sometimes took a few hours even. It wasn't a big deal at the time because it was infrequent and while the phone was at a low battery %. However, in the past few months, around the time I upgraded to iOS 5.1 it started happened more and more often and at higher and higher battery percentages. It is now at a point where my phone shuts off every time I connect to the 3G network regardless of what my battery life is. I have called Rogers several times to complain about this and I have been told it is because of the battery for the most part but I don’t buy it; the problem has got to be more significant than the battery alone because I can listen to music and send texts at anytime and fully use the internet when I am connected to Wi-Fi. I more recently talked to someone in tech support from Rogers who said my phone cannot support the iOS 5.1 software and that is why it is crashing. They also asked if my phone was heating up more now than in the past and it is. They said this was further evidence that my phone was couldn't handle the new software and was basically on overload. I was told to the best solution was to "Back Up" my iPhone then do a full "Restore". Here is where my next problem comes along. I cannot "Restore" my iPhone without doing an upgrade and every time I attempt to "Upgrade & Restore" an error message pops up that says "There was a problem downloading the software for the iPhone "...". The network connection timed out/was reset. -Make sure your network settings are correct and your network connection is active, or try again later". I have followed all of the protocol that is readily available online to address this problem but still no success. I disabled my firewall and anti-virus programs, I have ensured my connection is active and stable, I have upgraded to the newest iTunes, I have uninstalled iTunes and all apple programs in the correct order then reinstalled iTunes, I have disabled my DNS cache. Nothing works.
If you have any advise whatsoever please share as it would be greatly appreciated.
Thanks

I was actually able to upgrade to the newest software, iOS 5.1.1 without connecting to my computer/iTunes but rather directly through my phone when I was home on Wi-Fi. After the upgrade I plugged my phone into a different USB port at the back of my computer and was able to do a full restore. I really don't think the USB port had anything to do with it because I use the same front USB port all the time with my external hard drive and other devices wuth no problems at all; regardless of what the actual solution was, I am now able to connect to iTunes and upgrade/restore without any problems so that half of my problem is resolved.
I have yet to leave my house since doing the upgrade/restore so I am not sure if the problem with my phone crashing when I use the interent on the 3G is still an issue. I will test it today and tomorrow and give you an update.
Thanks

I have tried to install itunes on my laptop but at the end of install it comes up with error 7 (windows error 998) any help most appreciated!

I have tried to install itunes on my laptop and at the point of completion i get the error messsage 7 (windows998) but it wont reinstall any ideas how i can fix this issue?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Error 1406... any help?

Similar Messages

Maybe you are looking for