Error 1406.Could not write value Adobe ARM

Hi all,
I have tried to install the new version of Adobe Reader XI, but I keep getting the following error messages.
I have tried to follow suggestion by others on the web as to how to sort this problem out.
I have uninstalled adobe reader and restarted the computer.
tried to download again but still get the error message.
The full error message I got was,
Error 1406.Could not write value Adobe ARM to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
I went to the registry HKEY_Local_Machine and then to the above location.
in the right hand side of the registry editor is listed ADOBE ARM   "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe"
I have tried to delete this entry but my system wont let me.
I am running Windows 7 ultimate 32 bit
I have 4 Gb RAM
I have an Intel core2 Quad Q6600 @2.40Ghz
I run Zone Alarm Extreme Security with virus protection.
I hope someone can help as I want to install Adobe Reader.

Truthfully, I don¹t know the difference.
Okay here is what happened:
I purchased a new Mac because my old one was on the fritz.  They put all of
my old programs on my new computer including my old Adobe Acrobat 7.0
Standard.  Since I purchased a newer computer, I gave the old one to my
assistant.  But the Apple people replaced the hard drive on the old one, so
none of the old programs were in the system.  I purchased Adobe Acrobat XI
Standard for the new computer and figured I could just reload the old
acrobat on the old computer. But I had to buy new windows and parallels
programs in order to get the parallels program to work on the old computer.
Here¹s what it looks like:
New Computer:
Old Windows
New Acrobat
Old Parallels
Old computer
New Windows
New Parallels
Old Acrobat
How much more messy could this get?
Maybe I should put all of the old stuff on the old computer and all of the
new stuff on the new computer?
Or, maybe I should just update everything? Prior to this everything worked
fine. . .
But, what do you think?
Dionne L. Wade, Esq.
Law Office of Dionne Wade
1301 Main Avenue, 2nd Floor
Clifton, New Jersey 07011
Office 973.340.4662
Fax: 973.340.4775
INTERNET CONFIDENTIALITY NOTICE:
This transmission is intended only for the use of its indicated recipients
and may contain information that is privileged, confidential and exempt from
disclosure under applicable law.  If the reader of this transmission is not
an intended recipient, you are hereby notified that any dissemination,
distribution or copying of the transmission is strictly prohibited.  If you
have received this transmission in error, please immediately notify us by
telephone (collect call if long distance) and/or by e-mail, delete the
transmission from your system and destroy any printed copies which you may
have made of the transmission.

Similar Messages

  • Error 1406.Could not write value NoExplorer to key

    How do i fix this error? Anti virus real time scanning and firewall protection are already off but does not help.
    Error 1406.Could not write value NoExplorer to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{18DF081C-E8AD-4283-A596-FA578C2EBDC3}. Verify that you have sufficient access to that key, or contact your support personnel.Error 1406.Could not write value NoExplorer to key

    See the following help document:
    Acrobat Help/ Error 1402 | Error 1406 | Acrobat, Reader
    http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html

  • Error 1406.Could not write value  to key

    When I at almost done installing iTunes, I get this error message, everytime whether I do it from the CD that came with my iPod or if I download it from apple.com and try to install it. For the sufficient access part (In full error message below), I have the only account on this computer so I do have admin permissions.
    Full error message...
    Error 1406.Could not write value to key \Software\Classes\.cdda\OpenWithList\iTunes.exe. Verifu that you have sufficient access to that key, or contact your support personnel.

    Oh yeah, if I press ignore, it installs a little further then I get another error message:
    Error 1402.Could not open key: HKEYLOCALMACHINE\Software\Classes\,cdda\OpenWithProdigids. Verify that you have sufficient access to that key or contact you support personel.
    And then... I get another error message, but before I get the error message, the installer says "Rolling back action:" for a bit and makes some progress.
    Error: -1603 Fatal error during installation.
    Consult Windows Installer Help (Msi.chm) or MSDN for more information.

  • ERROR: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

    ERROR: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

    Error 1402 | Error 1406 | Acrobat, Reader
    Error 1603: A fatal error occurred during installation

  • Error 1406 : could not write value to key \software sql server installation

    I've problems installins SQL Server with management studio
    I tried different steps starting from 
    Changing permissions of the local user while running both registry editor and installer with adminstrator
    i've checked most similar posts here in the forums and followed their steps but no progress , 
    this is the error message
    i couldn't resolve it till now , i'm in this problem for 4 days till now tried different suggestions but no progress , i'm in a hurry , so please help me
    Regards,
    Omar

    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2068052610
      Start time:                    2014-08-05 23:21:36
      End time:                      2014-08-05 23:29:12
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
      Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
    Machine Properties:
      Machine name:                  OMAR
      Machine processor count:       8
      OS version:                    Windows 8
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered  Configured
      SQL Server 2014                                                          Client Tools Connectivity  
                 1033                                      12.0.2000.8     No         Yes    
      SQL Server 2014                                                          Client Tools Backwards Compatibility
        1033                                      12.0.2000.8     No         Yes       
      SQL Server 2014                                                          Client Tools SDK      
                      1033                                      12.0.2000.8     No        
    Yes       
    Package properties:
      Description:                   Microsoft SQL Server 2014 
      ProductName:                   SQL Server 2014
      Type:                          RTM
      Version:                       12
      SPLevel:                       0
      Installation location:         E:\Sources\SQL Server with management studio\SQLManagementStudio_x64_ENU\x64\setup\
      Installation edition:          Express
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      true
      AGTSVCACCOUNT:                 <empty>
      AGTSVCPASSWORD:                <empty>
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SSMS, ADV_SSMS
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  true
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    <empty>
      INSTANCENAME:                  <empty>
      ISSVCACCOUNT:                  NT AUTHORITY\Network Service
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          AllFeatures_WithDefaults
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         <empty>
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 <empty>
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           <empty>
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    0
      UIMODE:                        AutoAdvance
      UpdateEnabled:                 true
      UpdateSource:                  MU
      USEMICROSOFTUPDATE:            false
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                SQL Server Management Services
      Component error code:          1406
      Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
      Error description:             Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                SQL Server Management Services
      Component error code:          1406
      Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
      Error description:             Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\SystemConfigurationCheck_Report.htm

  • Failed to install ms sql 2012, it shows 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel. error

    Hi friends,
    i have tried to install ms sql 2012 on windows 8.1 pro 64 bit  but it got failed due to the following error 1406 Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.. 
     I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
    this forum and other.
    I have also attache the detail.txt log file here
    So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible. 
    Thanks in  advance!!!

    Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
    http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
    http://support.microsoft.com/kb/913559
    Raju Rasagounder Sr MSSQL DBA

  • Error 1406: could not write a value to key

    error 1406. could not write value to key \software\classes\.cdda\openwithlist\itunes.exe. verify that you have sufficient access to that key, or contact you support personnel. I get this each of the 1000 times i try to instal itunes + quicktime from my ipod nano disk that came with the package, its a band new serial number key, no idea why it wouldn't reconize it, please help or e-mail me [email protected]

    hi rion!
    okay, here's a good place to start with a 1406:
    http://docs.info.apple.com/article.html?artnum=93976
    ... and if the basic techniques don't work, we've also had success when using:
    http://docs.info.apple.com/article.html?artnum=93865
    ... and:
    http://reviews.cnet.com/5208-6142-0.html?forumID=31&threadID=46127&messageID=642 456
    keep us posted on your progress.
    love, b

  • Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run

    Had reinstalled Windows 7. Trying out Acrobat and keep getting this error: Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run
    tried a few of the discussions and haven't been able to fix it

    Hi richardt4827,
    Please let me know if you have tried out the solutions given in this KB doc link:
    Error 1402 | Error 1406 | Acrobat, Reader
    Hope to hear from you.
    Regards,
    Anubha

  • What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters.  Verify that you have sufficient access to that key, or contact your support personnel?

    What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters.  Verify that you have sufficient access to that key, or contact your support personnel?

    See Troubleshooting issues with iTunes for Windows updates for general advice.
    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows but apply it to the branch in question.
    In this thread the OP found their AV solution appeared to be blocking access to the registry. 
    tt2

  • Error 1603 - Could not write value to key \Skype.C...

    Hi,
    I'm running Windows 7 and have admin privileges on the computer.  I just attempted to download and install the latest version of Skype.  The Install failed with the error message: "Could not write value to key \Skype.Content\shell\open\command"..." I checked the community and saw the post about Error 1603 and running Microsoft FixIt.  I downloaded and ran that.  It did not list Skype in the list and did not find any problems.  So... I cannot install Skype, and this error continues to occur. 
    How can I fix this problem and install Skype?
    Thanks,
    SoccerDude

    Try this  Lessmsi  method:
    http://community.skype.com/t5/Windows-desktop-clie​​​nt/Impossible-to-install-v6-13-0-104-Error-1603...
    Be aware that if you want to install the currently latest 6.22.81.105 version, then you should use SkypeSetup_6.22.81.105.msi file in order to extract Skype.exe and Login.cab files.
    SkypeSetup_6.22.81.105.msi file can be downloaded using this link:
    http://download.skype.com/msi/SkypeSetup_6.22.81.105.msi

  • SQL Server Installation failing saying 'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'

    Hi,
    I am trying to install SQL server 2012/SQL Server 2014 and I constantly keep getting this error and the Management Tools fails to install.
     'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'
    Tried installing even SQL Server 2008 and still get the same error.
    Below is the log i get from C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140705_151943\sql_ssms_Cpu64_1.log
    MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
    MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
    MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(,,)
    MSI (s) (FC:D8) [15:22:55:746]: Note: 1: 1406 2:  3: SOFTWARE 4: 5 
    MSI (s) (FC:D8) [15:22:59:434]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value  to key \SOFTWARE.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1406. Could not write value  to key \SOFTWARE.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.
    MSI (s) (FC:D8) [15:23:03:435]: User policy value 'DisableRollback' is 0
    MSI (s) (FC:D8) [15:23:03:435]: Machine policy value 'DisableRollback' is 0
    Action ended 15:23:03: InstallFinalize. Return value 3.
    Just not able to figure out what the problem is, can someone help?
    Thanks

    Hi,
    Thanks for providing log
    Following is in the log.
    01) 2014-07-09 11:08:53 Slp: Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.
    (01) 2014-07-09 11:08:58 Slp: Watson bucket for generic failure has been created
    (01) 2014-07-09 11:08:58 Slp: Error: Action "Install_sql_ssms_Cpu64_Action" failed during execution.
    (01) 2014-07-09 11:08:58 Slp: Completed Action: Install_sql_ssms_Cpu64_Action, returned False
    (01) 2014-07-09 11:08:59 Slp: ----------------------------------------------------------------------
    (01) 2014-07-09 11:08:59 Slp: Running Action: Install_sql_tools_Cpu64_Action
    (01) 2014-07-09 11:08:59 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_tools.msi' does not exist
    (01) 2014-07-09 11:07:00 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_ssms.msi' does not exist
    (01) 2014-07-09 11:07:00 Slp: Checkpoint: PREINSTALL_SQL_SSMS_CPU64_ACTION
    (01) 2014-07-09 11:07:00 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
    (01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open SC Manager
    (01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open service handle for service msiserver
    (01) 2014-07-09 11:07:00 Slp: Invoking QueryServiceStatus Win32 API
    (01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close service handle for service msiserver
    (01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close SC Manager
    (01) 2014-07-09 11:07:00 Slp: Target package: "D:\Softwares\SQL2012\DeveloperEdition\x64\setup\sql_ssms.msi"
    (01) 2014-07-09 11:07:57 Slp: MSI Error: 1406 Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.
    (01) 2014-07-09 11:08:38 Slp: InstallPackage: MsiInstallProduct returned the result code 1603.
    (01) 2014-07-09 11:08:38 Slp: Using MSI error code to detect the retry option: 1406
    (01) 2014-07-09 11:08:38 Slp: No retry-able MSI return code detected.
    (01) 2014-07-09 11:08:38 Slp: Watson Bucket 2
     Original Parameter Values
    From above it seems client tools component is missing from Installation or may be problem with Windows installer but I guess this is not issue with windows installer . Can you re download SQL Server package and run again.
    Edit: For further analysis can you also post log from below location on skydrive
    C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140709_104804\sql_ssms_Cpu64_1.log
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Could not write value to key \software

    could not write value to key \software error
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    Could not write value  to key \SOFTWARE.   Verify that you have sufficient access to that key, or contact your support personnel.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK

    Hi,
    When we encounter errors during the installation of SQL Server, we can check the summary and detail logs for analysis, by default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    According to your error message, it seems that your account doesn’t have sufficient permissions to modify the registry when installing SQL Server. Thus please make sure that you choose “Run as administrator” to run the setup file, and ensure that your account
    has full control permissions on the \SOFTWARE registry. For more details about the error, you can review this article:
    "Error 1406 Could not write value to key \SOFTWARE".
    Thanks
    Lydia Zhang

  • SQL Server Management Tools - Could not write value to key \SOFTWARE. Error code: 1406

    Detailed Results:
    Feature: Management Tools-Basic
    Status: Failed
    Component Name: Sql Server Management Studio
    Component Error code: 1406
    Error Description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
    The first time the installer worked installing perfectly, but I needed an named instance of "SQL2008", so I removed the instances. After this re-installing is not working.
    From past 3-4 days I went through most of the links which has provided solutions for error code 1406, and not having success for installing.
    I have tried these options,
    1) Ran the installer using "Run as Administrator"option. I am an Administrator user for the machine.
    2) In Registry Editor, right-click HKEY_CURRENT_USER\Software, and then click Permissions. Click Add, type Everyone, and then click OK. Under Group or user names, click Everyone. Under Permissions, click to select Full Control in the Allow column, and then
    click OK.
    3) Uninstalled the Sql server product, and used Revo Uninstaller / CCleaner to clean the registry and the remaining files and folders.
    4) Multiple versions of SQL installers have been tried (SQL 2008/2012/2014)
    5) Logged in as local/Administrator for the machine, tried the similar steps.
    6) The same installers are still working in one of the virtual machines for multiple times of installation and uninstallation without having any problems.
    Please let me know, if needed further information. Please provide help for installing SQL server management studio.
    Regards,
    Ananth.

    I have the same problem.
    I can not install MSSQLManagementStudio. I suppose
    that is not the fault of permissions
    . I have tried to
    install as an administrator
    on the computer in the domain where the account has domain administrator permissions.The account is added to the local administrators.
    I also have tried to install as local administrator
    account after the removal of the domain.
    With the same result.
    Operating System Windows 8.1 Prof.
    I have tried  2012, 2012with SP1 , 2012x86 , 2014. All with same result:
    Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value  to key \SOFTWARE.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.
    Other elements installs without any problem.
    sql_ssms_Cpu64_1.log show that the problem is in that point:
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\Microsoft SQL Server\110\Tools\ClientSetup,,BinaryType=0,,)
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SqlToolsPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\,)
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=Path,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\,)
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
    MSI (s) (1C:C0) [10:32:51:834]: Note: 1: 1406 2:  3: SOFTWARE 4: 5
    MSI (s) (1C:C0) [10:33:19:949]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value  to key \SOFTWARE.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1406. Could not write value  to key \SOFTWARE.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.
    07/30/2014 10:33:19.949 [540]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
    ...... rest of the roolbaack next
    As i the lines:
    MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
    MSI i opening the root hive of HKLM/Softftware
    and MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
    and trying to Add Default Value.
    What is impossible regardless of the
    level of permissions.
    Please provide help for installing SQL server management studin in any version
    Regards,
    Michael

  • Please help with an error "could not write value key \Software\classes\iTune.wav.....

    I have windows 7 with plenty of memory and storage capacity. When accessing iTunes I had an error message to uninstall and reinstall. I have uninstalled but when trying to reinstall I get the error message "could not write value key \software\classes\iTune.wav. Verify that you have sufficient access to that key or contact your support personnel"  I don't understand what this means, can anyone help please?

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    If you still have issues see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Could not write value vmware-tray.exe to key MSI error on Windows 8.1

    Hello All,
    I posted the following question to Microsoft guys,  but the fellow at Microsoft support was 1000% sure that this issue is related to VMWare only. I am hoping to  get some assistance at least here.
    My question as below:-
    Hello All,
    NOTE: I have gone through many forums already and have followed all the steps recommended by different experts there. NO AVAIL! Hence, I am posting this here.
    I have been trying to install VMWare Workstation 11 on my Windows 8.1 and I keep getting the MSI Error which says, "could not write value vmware-tray.exe to key \SOFTWARE\Microsoft\Windows'CurrentVersion\Run.  Verify
    that you have sufficient access to that key, or contact your support personnel" 
    This is really very frustrating now. And I am beginning to hate Windows 8.1 :-(
    I have disabled Anit-Virus, Windows Defender, Firewall ...everything possible. Tried to run the program as "Administrator",  changed the permissions of all the HKEY related stuff under 'regedit"  to "Full Control".... 
    I did everything that was asked. Nothing happens. I keep getting the same error.
    Please Please help!!!!

    You posted this in the Windows 8.1 Hyper-V group.
    So I will ask, is Hyper-V involved?  Do you have the Hyper-V role installed?
    And again I ask, have you posted in the VMware forums? I ask because if this is a known issue, they would be the people that would know the reason and resolution (since it is their software package - regardless of the reason)
    And, have you tried manually adding a registry setting to the registry path (without elevating your privileges)?
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

Maybe you are looking for

  • Getting all the values from a JList

    Hi, I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.

  • Unable to sign up for Onlive

    I am unable to sign up through the BT website for their free 3 month offer of Onlive. It says my line doesn't meet minimum speed requirement. According to the Onlive FAQ a minimum of 3 meg is needed and 5 meg is recommended. I currently sync at 6.7 m

  • Adding fold marks to flat pieces

    Is there a way in Indesign CS3 to indicate a fold so that when you export with crops and bleeds, there is a registration mark indicating a fold? I frequently do two-sided flyers with off-center folds. I can't do them as page spreads because the pages

  • Where do i find an app for word documents such as letters, resumes, ect

    Where do I find an app for a word document such as letters, resumes, ect.?  I have a

  • Compile error when using DRAM

    I am using the NI PCIe-1473R Framegrabber on Labview 2010 SP1. I would like to do some image processing on the FPGA. I started off with the 10-Tap 8-Bit Camera with DRAM example. I am trying to replace the DRAM FIFO with DRAM circular buffer. I need