Error 1406 during application installations
When installing more than 1 Labview applications on my computer that were created using version 6.1 I get the following error messages:
ERROR 1406. Could not write value version major to key UNKNOWN\Products\37212F9246F95954C8E26D4561F02FFB\InstallProperties. Verift that you have sufficient access to that key.
If I select ignore another error 1406 message apears.
This only happens after one labview in installed error free and installation of another is attempeted.
Any Ideas?
There are several NI KnowledgeBase articles that potentially provide answers to the installation problems you are seeing.
The first (2CRF5B1R) relates to the Windows Registry being at its maximum size and therefore not being able to write the additional keys as required by the installer. From experience this is rare, but the article is worth reading and considering.
The second (2OK8222G) states that this error may occur if you use a non-numeric character in the product version entry in the Application Builder dialog. The article provides more of an explanation - so its not worth repeating here.
Jump to the KnowledgeBase at the following link:
http://digital.ni.com/public.nsf/MainPage?OpenForm&node=133020_US
Hope this information resolves you
r problems.
Jeremy
Similar Messages
-
Cash on Tap - Unknown Error Code During Application Installation "-507"
I get the above message when trying to install the Cash on Tap on my LG G3 running Android 5.0 Lollipop. I also got the same error when trying to install it under the last release of KitKat. My G3 isn't the UK version D855, it's the South Korean version which is an F400S [software version F400S20g]. It's the genuine F400S rom and not a custom build [obviously customised by LG though] and not rooted. I appreciate that this device isn't on EE's supported list. But I'm curious as to what the requirements are for this rom to run, and if anyone else has encountered this message and succesfully found a fix?
.:[Bump]:.
-
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7. -
Can't download latest Itunes 10.5 - Keep receiving following error: An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win32",version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".pro cessorArchitecture="x86".
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Error 1935. An error occurred during the installation of assembly...
I utilizing VS.Net and I'm deploying a project to my client machines. The XP client machines execute the code just fine but I get two general errors when I try to run the app on a Vista Business machine.
1) Crystal Reports Basic Runtime for Visual Studio 2008
Error 1935. An error occurred during the installation of assembly.
'Microsoft.VC90.ATL.version="9.0.21009.1.publicKey="1fc8b9a1e18e3b:.processorArchitecture="x86".type="win32'"
Please refer to Help and Support for more information.
2) The other error happens when I actually run the app and its in InnerException error.
Things that I found on the web discuss adding merge modules to VS but I can't find where to reference that info. Are there any other ideas out there.
Thanks-
JLNHello,
Good Day!
I'm having a nasty problem that remains unresolved for the last four weeks now - I'm trying to install CR2008 on a brand new Dell laptop /w 64-bit OS Windows 7 with a T4300 dual core processor (2.1Gz). As far as I can see SP1 or SP2 are not installed. However, I see MS WSE 2.0 SP3 Runtime installed.
During installation of CR 2008 the error message as follows shows up -
Error 1935: An error occured during the installation of assembly component {303994BA-6487-47AE-AF1D-7AF6088EEBDB}
HRESULT: 0X80070002
As a result of this error the installation terminates and the rollback begins (I assume it completely removes the components that it attempted to install so far.
The laptop has the following significant software applications -
Microsoft SQL server 2005, SQL server Native Client, MS VisualBasic 2005 & 2008, C++, MS Visual Studio 2005 Remote Debugger & Windows SDK for Visual Studio 2008 - just in case there are any known conflicts or problems.
Are there any 'leads' I can follow to successfully conclude this installation.
Thanks for your time.
TGupta -
LC / Solaris Errors occured during the installation : null
Hi all,
I'm installing LC with WebLogic on a Solaris server. Everything seems to goes right till the end of the process when I get "Errors occured during the installation" and the error message is "null". It's not actually helpfull...
I've checked the installation folder permissions : 777 so it seems to be right too.
The only weird thing I see is that the serial number I have to use seems to be for Windows : "Adobe LiveCycle ES Win WebLogic", but it worked because it allowed me to install a bunch of applications.
I'm logged as root.
Any idea ?
ThxWhich version of the JDK did you install?
-
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
ITunes / Quicktime won't install - error message during in installation
My computer, a Dell running with Windows Vista, has not been able to have iTunes & Quicktime installed on it in months. I've attempted to install it a countless number of times & tried a variety of things with my computer to install it but it just doesn't work - I get the same error message everytime. I can't even remember what happened to make it start acting so ridiculous.
It always starts out looking good and everything seems to be working pretty well, the green bar filling up pretty quickly, but then the 'Status' gets to about 'Publishing product information' and the error message pops up and I can't install it. It goes along the lines of "A error occurred during the installation of assembly: ..." then it goes on to say 'Please refer to Help and Support for more information. HRESULT: 0x8007054F'. Here's a screenshot of the error message with the long whatever on it:
http://i46.tinypic.com/qoesm1.png
I believe I get the same message even when I attempt to download the two software separately (iTunes & Quicktime).
Can any one tell me what needs to be done? I have no idea what to try anymore. All help will be much appreciated. Thank you .
P.S.: If it helps, I can't really reinstall Internet Explorer (removed it when I downloaded Firefox).Thanks!
(3) And I do not believe I have Microsoft Visual C++ 2005 installed on this computer, as I just tried to install it and I received this error message: http://i45.tinypic.com/a3m7bc.png
Okay ... that rules out one possible treatment. Sometimes people with the redistributable installed can get past this by applying a security update for it ... but it looks like the same sorts of problems are preventing it from installing.
(2) And last time I checked my History I had several failures I believe, however now I only see one failed update, that being Update for Windows (KB944036). The error code listed 8000FFFF. Apparently it's an update for Internet Explorer 8.
The other primary strategy we (I?) have for dealing with these is to attempt to treat any underlying issues on the PC that prevent Windows Updates from installing. Although I have a sneaking suspicion that your 8000FFFF is related to your IE being uninstalled, I think we'd probably better try following up on the following document:
[Error when you download updates using Windows Update or Microsoft Update: 8000FFFF|http://support.microsoft.com/kb/946414]
After applying those measures, do your Windows update and/or iTunes installation failures clear up? -
Error occurred during the installation of assembly 'Microsoft.VC80.CRT... blah blah.. HELP!
I've been getting errors completely randomly.. I've yet to DL Itunes until recently and as I tried to start it up (with a seemingly perfectly fine installation I get this fat *** error.. error is as follows below.
An error occoured during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to HELP and Support for more information. HRESULT: 0X80070216
^This was a pain in the ******* to rewrite as it wouldnt let me copy and paste. Please help me : /See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)
Maybe you are looking for
-
HT1277 cannot find a way to install my OVI account in Apple mail (mountain lion)?
I have just upgraded to Mountain Lion, now I cannot configure my OVI email account. Apple email configuration in Mountain Lion does not recognize the OVI mail as a Yahoo provided email address. It does recognized the fact that OVI is a Yahoo based ad
-
How to make function: line amount total and final colum total at the bottom (Acrobat pro 9)?
The form is like this: col 1 col 2 col 3 col 4 col 5 Row 1 amount amount amount line total Row 2 amount amount amount line total Row 3 amount amount amount line total Row 4 amount amount amount line total Row 5 colum total colum total colum total col
-
In CS2, how can I save a file as PDF 9.0+?
Hi everyone, I use Illustrator CS2 and when I save a file in CS2 (Save As) as a PDF i can only save it as an Acrobat Reader 4, 5, 6, or 7.0 file. Is there a way to save a CS2 .ai file as an Acrobat Reader 9.0+ file while in Illustrator CS2?? Thanks i
-
Hello. I've used tutorial from Archlinux wiki to get easy copy (ctrl+c) and paste (ctrl+v) in urxvt. The problem now is that urxvt can't paste non-latin characters correctly. For example, I need to paste this to terminal: Région parisienne Guake term
-
Hi does anyone knows how to use the canera kit ? What are the other software that need to download? Thx