Error 1406 during installation, nothing fixes it!
Hello esteemed forum!
I've tried everything that is listed by Apple to get iTunes to install but I'm still getting the same problem. There shouldn't be any adminstrative privileges issues on my PC because I am the only one that uses it and I've never had any issues before.
I tried the fix posted on InstallShield's website (http://consumer.installshield.com/kb.asp?id=Q108504), and curiously when I attempted to "acquire administrative priviledges" the Local Users and Groups file was not listed. Does anyone have any suggestions?
Thanks!
Windows XP
I found a fix.
http://docs.info.apple.com/article.html?artnum=93865.
This forum is a good resource that I am learning to use. Thanks!
Similar Messages
-
I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Itunes 11.1.1 Errors occurred during installation...
Errors occurred during installation before Itunes could be configured. Your system has not been modified. To complete the installatoin, run the instaler again. Click Finish to exit the installer. I've tried re installing iTunes 11.1.1 multiple times and I've redownloaded the file. Has this happend to anyone? If so what was the resolution to fix it? Thank You [:
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I am trying to install iTunes on my computer and everytime I do it says
"error occured during installation before iTunes could be configured. Your system has not been modified" how do I fix this?Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90 -
Errors encountered during installation(7)
When trying to install lightroom through creative cloud I get Installation Failed - Errors encountered during installation(7) - I have tried rebooting the machine logging in and out nothing helps ?
Hello all and thank you for the replies. @Mylenium this is a new system setup = windows 8.1 fully updated - hardware not so new but more that adequate - i7 processor 3.2Mhz 16GB ram 2TB hdd 2 x Nvidia GTX 60's in SLi and Adobe apps was the first I installed , Bridge & Photoshop went through fine. The only error message was that one clicking the link to get more info just took me to a generic help site.
Anyway last night I downloaded the trial version which came down fine and installed it without a glitch and after registering the software online it picked up that I was a CC user and automatically entered the license key so all is good. -
I get this error when I try to download I-tunes. "Errors occurred during installation before I-tunes could be configured. Your system has not been modified to complete installation. Run installer again. I have tried running the installer again several times and keep getting this error. Any suggestion as to how to fix this?
Finally the above problem was sovled. First click on control panel and search for all Apple software and uninstall all related to Apple software. Then download itunes again and run it to install latest itunes and after installation is finish. All Apple software shall run properly.
-
Reboot fails OS X 10.6.7 mac "error occurred during installation"
Macbook pro wont install OS X 10.6.7 "error occurred during installation"
Try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try reinstalling the 10.6.7 update. Be sure you are using the Combo Updater. -
"fatal error occurred during installation" pops up after downloading itunes
i have recently purchased a new iPod nano, so (on my windows vista acer laptop - which i had previously had itunes on before - my old ipod had broken ages ago so i uninstalled it and everything) i started to download itunes. it had done so with no problems at all. but when it went to install (it didn't do it automatically so i had to click on the icon) the "fatal error occurred during installation" came up without specifying what error. i have tried uninstalling and reinstalling, restarting my laptop etc but nothing has worked. the same message occurs all the time.
can you help me solve this problem as i would like to listen to my music when i go out =[
please and thanksI have the same problem. Ipod touch purchased for christmas and I cannot load itunes without this fatal error always occuring. Have tried changing access and priveledge controls all to no avail......can anyone help?
-
WHY DO I GETY ERROR 1311 DURING INSTALLATION OF ADOBE READER
WHY DO I GET ERROR 1311 DURING INSTALLATION OF ADOBE READER
From past report, I found following comments:
1311 error comes when during installation some resources are not accessible. It may have happened that some resources were missing or blocked on users machine. We would need MSI logs to look further into this.
One person was able to fix the problem:
After re-booting and cleaning out temp files, etc., the 3rd try resulted in success! I do not know if this error was a fault within my system or not.
I also found a KB article on Adobe Reader 9: http://helpx.adobe.com/acrobat/kb/error-1311-install-reader-9.html
Not sure what version/OS you have, but I hope it helps. -
Error 1935 an error occurred during installation of assembly component
I get this message when trying to install Lightroom 4.3
error 1935. an error occurred during installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE} hresult 0X800700C1
I've tried installing with antivirus software shut down. I've reset the file system transaction log. I turned off the .net framework v 3.0 in the programs and features section of control panel. The only thing I haven't tried is deleting the .net framework because the other articles were unclear as to exactly what and how to delete them.
Please help!that looks like an ms error.
attach a screenshot, if you're not sure. -
FATAL ERROR occurred during installation
Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Error Occurred during Installation iWeb 3.0.3
I'm trying to upgrade from 3.0.2 to 3.0.3 and get 'An error occurred during installation.' The error actually occurs during the Moving Items Into Place phase of the upgrade. iWeb is in the Applications folder and is not in a sub-folder.
Any ideas??? Thanks in advance.Run Disk Utility and repair disk permissions. Then download and reapply the iWeb 3.0.3 updater.
OT -
Adobe Acrobat XI installation fails when get Error 1935 "during installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0X8007054F
Hey Nicholas,
The following link might help in resolving your issue :
http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
Please let me know if this helps with your issue.
Regards,
Rahul -
Errors Occurred During Installation...
Hey, I've been trying to install iTunes Windows 12.1.1.4 x64, however I keep getting this error:
iTunes Installer completed
Errors occurred during installation before iTunes could be configured.
Your system has not been modified. To complete the installation, run the installer again.
Click Finish to exit the installer.
Help ASAP Please?!
Thanks,
Hard @ WorkHey there Hard @ Work,
If you have yet to be able to install iTunes on your PC, I would recommend that you use the troubleshooting information in the following article, named:
If you can't install or update iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling
Maybe you are looking for
-
Best headset (head phones & microphone) for use with Skype? In Mexico (La Manzanilla, Jalisco, sm town) for 5 months. Do not have phone (landline, cell, nada) & will depend on Skype for incoming/outgoing calls. Also, no stores nearby (radioshack @ 60
-
Print driver problem under Maverick OS
I guess I was a little too quick to update from Lion to Maverick. There is no print driver for my HP Laserjet 3200 All-in-One . I cannot print any pages anymore , it appears Apple threw in some obscure driver that does not work like the one under Lio
-
My rugged laptop comes with the ATI Mobility Radeon 9000. It has an external 15 pin VGA out, and I have this convertor: http://tinyurl.com/84cnxp. Is it possible to send video to a television this way? I can use it to send to an external monitor, inc
-
I had purchased a movie on my ipad while on a business trip and now I'm home on my IMac and wish to watch the movie I didn't finish on my iPad. How can I continue to watch on my IMac if I purchased and started on my iPad ?
-
Some hours ago I tried to lower the volume with the keyboards dedicated key. It didn't work. I was working seconds ago. I tried xbindkeys -k: Press combination of keys or/and click under the window. You can use one of the two lines after "NoCommand"