Error 1406 NoExplorer for the Key \Software...

I had been updating previous versions and there was no problem. But this time updating to Adobe 11 is a huge one. It started some 2-3 weeks ago and since then no solution. I was advised to go to the key and change permitting the owner to have all rights. I am the owner and the administrator and the only used. I saw that regedit did not listen to my command and I was advised to open regedit as the administrator and I did so but the same error persists that I am not allowed to give full rights to the owner. Administrator has full rights. As I saw some strange things, I decided just for fun to disable the righs of the administrators, but that was impossible, by default they have those rights, so I finally gave full rights to administrator-user but eventually that did not help much either, because the Reader won't install. Thank you.

The key starts with \Software, not with HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER?
If so, you need to find that key under HKEY_LOCAL_MACHINE\Software or HKEY_CURRENT_USER\Software and change the permissions.

Similar Messages

HT201210 In updating my iphone for the new software ios6. An error occurred and now is asking me to restore settings. But I don't want to lose my data

In updating my iphone 5 for the new software ios6. An error occurred and now is asking me to restore settings. But I don't want torestore setting causing not all of my recent data has been synced and I don't want to lose my data. How can I undo this since i did not hit restore settings, yet i can't do any other move without restoring at this point. Any ideas?

You phone is in recovery mode. Your data is already gone.
Why you would attempt a software upgrade without backing up all your data first is beyond me, but to each his own.
In any case, sorry for your data loss.

IPhoto suddenly crashing after it's open for 3 seconds.Its saying Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[ __NSCFDictionary 0x18d70d10 valueForUndefinedKey:]: this class is not key value coding-compliant for the key

Iphoto is suddenly crashing after about 3 seconds on my MacBook Pro. - Here is problem report
Crashed Thread: 46 Import thread 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[<__NSCFDictionary 0x18d70d10> valueForUndefinedKey:]: this class is not key value coding-compliant for the key .'
Why? all of a sudden??
Thanks

Wow, that' s awesome, I encountered the same problem with ya today when trying implement Pickers in Tabbar, and can't figure out why, the debugger just throw back such vague message and guess what ? I spent like 3 hours banging my head against the wall wonder why it's not working, I using XCode 2.2.1, my debugger wont work ( program won't stop at break points for what ever I tried ), and not very friendly with those newbie like me - really don't know where are all the Apple's software developer 1337 ? As I remembered, all the good ones goes for the hardware, "the rest" goes for the software =)), but thanks again, thanks, and again, click the tab bar, set both the class and nib file would get rid of the errors, if it would help some one, the credit goes to the two above, say thanks to them, like me. Have a nice day guys, I 'ma happy .

HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008

Hi,
When trying to save entry in 0008 infotype i am getting the error "No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008"
I had removed the integration PLOGi ORGA for some testing purpose. is it because of this. now i have set the integration switch back. still i am not able to resolve this.
Can anybody help me in this.
thanks

Hi,
Maintian the table V_t510, go to V_t510, enter the values like
40- Country Grouping
04- PS type
03- PS ARea
3- CAP(collective agreement Provision) which you have assigned to your employee subgroups in table V_T503Z.
MANAGER - Ps group
1 - Ps level
on 01.04.2008- start date.
in this table enter the wage type, which you have created under basic pay.
like
3 manager 1 1000 01012008 31129999
3 manager 1 1010 01012008 31129999
Regards
Devi

When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
Already reinstalled 3 times and always says the same message.
thank you

Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?

I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?

Please do not try to send attachments in mail responses to forum messages. Please return to the forum and click Reply. You can then use the CAMERA icon to add your pictures. Looking forward to seeing what is wrong with your license screens - the general advice is simply to sign in, and everything is done. Make sure you use the SAME Adobe ID that you used to purchase, and check your account details to be sure the subscription is active.

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Burn failed: there was an error producing data for the burn

Getting the following message after trying to bounce a project to CD:
Burn Fail: There was an error producing data for the burn.
Using Logic Pro 9. Burn has worked with all projects up til now. Not sure what is different about this one. Still works with old projects. ANy ideas? Thanks.

Thanks very much for responding John, Minimum was to the CD. I have an Internal Superdrive. it does dvd and cd-rs. At this time, since my original post, I have burned four smallish rolls like 200 photos at 200+ MB's with success. And then I can try less say 100 photos @ 110MB and I get the error, and coaster that is unreadable. I have a partition area on another internal hard drive that I may try to transfer to so I can get these off my computer and maybe reinstall iPhoto. I will try to pop them into a folder and copy with Toast , which i use at times for other projects. I just like the idea of keeping all the rolls in order and not losing any of the data that is part of the originals. Any other ideas would be appreciated. The photos are sort of important.

Error 1406 NoExplorer for the Key \Software...

Similar Messages

Maybe you are looking for