Error (1418)- please help me!

Hi!
I have my ipod since last x-mas, and it was working fine untill I uploaded the new version (1.2) from the new itunes. After a few weeks I uploaded that my ipod started doing weird things and then, it stopped turning on, and when it does, it shows connect your ipod to your computer, and use itunes to restore it , when i plug in the computer, the ipod shows "do not disconnet", and itunes tries to restore it but it shows: an error ocurred (1418).
I already tried the 5 r's, abd I just dont know what to do!
so, please help me!
  Windows XP  

Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
From the above experience, I would like to share it with the user the following:-
1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
2. Try to connect the iPod with a computer, switching between USB and Firewire
3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
I hope the following works in your case as I did.

Similar Messages

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • It says "error 7, windows error 127" Please help

    It says "error 7, windows error 127" Please help

    I tried that, got this error:
    An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
    Please help!

  • Can't install Adobe Flash player ERROR. Please help

    I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
    Please help me I am really happy if someone here can help me.

    Hello,
    The log file indicates there are permissions issues on a couple of files and they are not being removed.  This is preventing the installation of the new version.  Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller.  Please only run the uninstaller and do not attempt to re-install at this time.
    Thank you.
    Maria

  • After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    Have you tried to reboot your phone(hold home and lock button simutainiously)?

  • Error 1001 - please Help!

     I am going crazy!  the software update keeps on displaying the error code 1001.
    I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
    please help!

     I am going crazy!  the software update keeps on displaying the error code 1001.
    I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
    please help!

  • My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

    It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

    Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

  • TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
    You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

  • After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
    Get help with iOS update and restore errors
    If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
    To narrow down the issue, you can try different equipment:
    Use the USB cable that came with your device, or a different Apple USB cable. 
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    Solve other issues with the USB connection, then with your security software.
    If you still see the error message, check for hardware issues by following the next section.
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did.  Error 1015 occurs by attempting to restore a previously jailbroken phone. 
    It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
    Terms of Use of this forum prohibit the discussion of jailbroken phones.  You'll have to scour the internet for a solution to your problem, if indeed one exists.

  • Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

    Hi i have problem  with my hp mini is giving me a error CNU9391WZR PLEASE HELP
    Hp mini 110 1140el

    Yes  bios password, i forgot  my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help 

  • Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

    hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

    the error is like "Could not load Apple Qmaster preference pane"
    if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

  • WWS-32136 UTL_HTTP error. Please help

    Hello,
    I am trying to get all content area content
    to show up inside the folder(or area). When I want to get WebDB reports or external sites
    to display within the content area, I get
    a utl_http error. Here is what I did:
    1. Create a Content Area
    2. Create an item or type URL
    3. Check the "link displays item in folder area" as the display options attribute.
    When I click on the link, webdb reports take
    up the entire page, while external url or
    external apps (like giving a link to www.oracle.com) ends up giving me a utl_http error.
    Please help !!
    Sanjay

    Sanjay
    Did you review the looking at the troubleshooting guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
    Seaching this page using the keyword 'utl_http' returned a likely solution:
    Cause: This is most likely happening because of a bug in the UTL_HTTP package that shipped with early versions of the Oracle 8.1.6 database on Windows NT.
    Solution: You must download and install the 8.1.6.2 patch from http://metalink.oracle.com (click patches, and then select "product: Oracle Server - Enterprise Edition", "platform: MS Windows NT"). You must be registered to use Metalink.

  • Export error. Please help

    Hi ALL,
    When i try to export the database i am getting the following error. Please help
    C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
    Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    The version of the db and export utility is same as u see from below.
    C:\>sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>
    Regards
    Arun Kumar

    One of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.

  • I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

    I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

    Boskou41043636 for information on how to resolve error 100 please see Troubleshoot Adobe Download Assistant.

Maybe you are looking for