Error 1430 when adding a new VI to the program
I have a program I developed in LV 2009 in 2009 and now I am updating it. I accidently opened it up in 2010 and saved it. There are Microsoft office tools that were built into LV 2009 that are removed in 2010 that I had used in my program. So I had to save as previous version (2009). After everything worked and I could run the code and compile I continued developing. At one point I tried to compile and got an Error.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1430 occurred at Create Folder in Create Directory Recursive.vi->AB_Destination.lvclass:Create_Destination.vi->AB_Build.lvclass:Create_Destinations.vi->AB_Application.lvclass:Create_Destinations.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path.
<Not A Path>
I have now figured out that if I add a new VI to the program, it gives this error. If I remove the VI, it compiles with no errors. If I add a blank VI with no code, it gives the error. I have worked as far as I could without adding a VI but now i need a pop up window and need to the VI. The code is too large to fit the max 6MB requirements.
Thanks
Matt
Solved!
Go to Solution.
Hi mattyk,
When you say compile, do you mean press the run button? When exactly does this error show up?
I suggest you try copying all of your VIs into a new project, and try running the new project. It sounds like your project may have been corrupted in the process of upgrading and re-saving to a previous version.
I hope this helps! Regards,
Emily C
Applications Engineer
National Instruments
Similar Messages
-
Bookmark: default filters lost when adding a new value on the filter
Dear all,
Sometime I need to go back to a bookmark and add extra GL accounts /or GL hierarchy node but I found that is often loses the original selection when I click the transfer button after select the new GL account/or GL hierarchy node. Is there any way to add a new value to the existing filter?
Best Regards<FONT FACE = "Tahoma", Font Color = "Blue">
Hi<br>
1. Open the bookmark<br>
2. Click on any field from the context menu and create another bookmark<br>
3. Put additional filters and press the transfer button<br>
4. The data will be displayed for (old + new) selections<br>
5. Click on any field from the context menu and create another bookmark. Make a note of it<br>
<br> Step 2 should not really be required but I'm assuming that your internet session was expired or similar problem. Please try this and let us know what happens.<br>
<br>
Hope it helps.<br><br>
Cheers Abhijit<br>
</FONT><FONT FACE = "Verdana", Font Color = "Red">
removed
</FONT> -
When adding a new graphic card the computer stuck when i see the hp logo.
wats in my pc:
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
NVIDIA GeForce GTX 550Ti (old one)
Pegatron IPISB-CH2
BIOS Version/Date AMI 7.12, 12-10-2011
memory 3X 4GB PC3-10600(DDR3-1333)
SSD Samsung evo 850 500gb &
HDD HP 2TB 7.2K RPM SATA 3.5 Inch HDD
Power HP PSU 460W Bordeaux-C (Active PF
I've now updated my grapic card to a ASUS STRIX-GTX970-DC2OC-4GD5 (new one)
When i put the grapic card in the system won't start i get a blue screen with the hp logo, and could not get into the boot menu or anything.
Anyone has a solution for me, i'm desperate now.Hi,
And the old "NVIDIA GeForce GTX 550Ti " only uses 116W, it needs only 400W PSU minimum:
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-550ti/specifications
>> ASUS STRIX-GTX970 this one uses 225W.
Only for the card itself, you have to run OTHER COMPONENTS of your computer. Just make a calculation:
Your machine has 460W to run a 116W video card, now you uses 225W video card or 225W - 116W = 109W more, you need 460W + 109W or 570W PSU.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do I get the location area to work when adding a new event? The location area will not allow me to enter information.
How do we find a remedy?
-
SDK Error -5002 when adding a sales order
I'm getting an error -5002 when adding a sales order.
Source code:
IDocuments m_so2 = SBOCOMUtil.newDocuments(icmp, SBOCOMConstants.BoObjectTypes_Document_oOrders);
line = m_so2.getLines();
m_so2.setCardCode("2173231916");
m_so2.setCardName("test Sales order");
SimpleDateFormat formatter = new SimpleDateFormat("dd.MM.yyyy");
Date today = Calendar.getInstance().getTime();
m_so2.setDocDueDate(today);
line.setItemCode("01005");
line.setDiscountPercent(new Double(10));
line.setItemDescription("description Testing");
line.setQuantity(new Double(3));
line.setTaxCode("0");
line.add();
long rc = m_so2.add();
Question:
Where can I find a list of error codes that can be easy to understand? PDF, word, etc.
Thanks.Hi Diego,
Looking at your code I see that you are doing a
line.add();
You dont need to have this here unless you are adding another line to your document.
Maybe this will help you.
Also just because java is a bit different from VB get the last error message using
SBOErrorMessage errMsg= comp.getLastError();
System.out.println(errMsg.getErrorMessage());
-Cormac -
Error occurs when creating a new destination in HCI OData Provision Administration
Hi,
An error occurs when creating a new destination in HCI OData Provision Administration.
Please see the screen shot in attachment.
Any help will be appreciated!
Thanks,
Li-huaIt's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
(still looking for the GWaaS colleagues to fix the original issue.) -
I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?
apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me. -
When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working
anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
when adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?
View Menu -> Sort Photos...
-
I got a -1202 Error msg, when I tried to agree to the NEW Apple terms? WHY?
I got a -1202 ERROR msg, when I tried to agree to the NEW Apple terms? WHY? These NEW terms popped up after I tried purchasing a Itunes song, SO WHY the error MSG?
Hi shirley1973!
It sounds like you may need to report an issue with this purchase to iTunes. Here is a link that will help you do this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!
I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension. -
Hi All,
I faced an error 'Error 5 when adding to PSA' (going into short dump ABAP runtime erro : Message Type X Erro). I am trying to load the data from ODS to another ODS with full upadte through PSA . I am facing this error. Can anybody help me in this issue. Please this is very urgent, all the dependant loads are stopped in production.
Thanks in Advance
NarendraThanks, This is solved by myself. I deleted all the failed requests in the PSA.
-
I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
ThanksI've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website. -
Getting error message when i am trying to update the excel file using script task in ssis package
Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
wbnacomm.RefreshAll()
wbnacomm.Save()
wbnacomm.Close()
excelnacomm.Quit()
Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Adding a new field to the Address Data for a business partner
Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
YusufThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.
Maybe you are looking for
-
How to delete my old Apple ID when I updated it already from iCloud?
I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID.
-
Please help me remove this playlist in my prius it's so annoying. The music isn't even on the phone anymore. Thank you
-
How to create a message check boxes group dynamically in OA Framework
Hi all, I am developing a custom OAF page. It is a master-detail page. And I am having some difficulties to build that. Firstly, I need to create a dynamic message check boxes group. These check boxes will get the prompt from a standard database tabl
-
J1ID - EXCISE MASTER REPORT & TABLE OF J1ID
Hi Friends, We have maintained Vendors excise masters details in J1ID, Please let me know the t-code of the report where I can extract all excise masters OR Table name for J1ID. Regards Suresh
-
Problems Faced with Partitions in Oracle 9i.
I have a doubt regarding the partitions in Oracle 9i can you please help me regarding this? Create table t1 ( x number, y number, z number); insert into t1 values (1,1,1); insert into t1 values (2,2,2); insert into t1 values (3,3,3); Create table t2