Error 1477: Failed to write to eDirectory. Verify ...

Hi!
NW 5.1 (master) SP8, NW 6.0 SP5, ZFD 4.0.1 (iR6). Windows XPp WS. C1
1.3.6d.
Strange. yesterday I could from mine admin-workstation remotely manage
WS's, but today I got error: "Error 1477: Failed to write to eDirectory.
Verify that the Remote Operator has rights to perform the operation.". I
see no error or abends from server side nor any (beside this one)
strange "behavior" etc. No changes made.
I tried on second admin-machine (this is running for backup-admin) and
same result. Overnight!
Any ideas?
More thanks, Alar from Tartu Uni, Estonia.

I also have the problem. Any lead to how to fix this?
Kind regards,
Rob
> Hi again!
> Further investigation lead me to Error -659 Time synch issue.
> So, something with daylight saving etc.
> More thanks, Alar.
>
> > Hi!
> > NW 5.1 (master) SP8, NW 6.0 SP5, ZFD 4.0.1 (iR6). Windows XPp WS. C1
> > 1.3.6d.
> > Strange. yesterday I could from mine admin-workstation remotely manage
> > WS's, but today I got error: "Error 1477: Failed to write to eDirectory.
> > Verify that the Remote Operator has rights to perform the operation.". I
> > see no error or abends from server side nor any (beside this one)
> > strange "behavior" etc. No changes made.
> > I tried on second admin-machine (this is running for backup-admin) and
> > same result. Overnight!
> > Any ideas?
> > More thanks, Alar from Tartu Uni, Estonia.
> >
>

Similar Messages

Error 1477: Failed te write to eDirectory

When I try to remote control a workstation from ConsoleOne using directory
authentication I get this error.'
The remote operator has sufficient rights and I don't know what it can be.
Any tips?
Kind regards,
Imre
We're running Netware 6.5sp2, edirectory 8.7.3.2smp, and Zen 4.01.4

Imre,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

We've been downloading books to our nook for years but recently keep getting error message "failed to write destination file" - why?

what is "failed to write destination file"?

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

Hi I am getting error code failed to write destination file when trying to transfer an e book

Any ideas what is wrong or how to fix?

Try copying something from your computer to the eBook using file manager such as Windows Explorer.
That might fail giving a more useful error message (such as 'no space available').
Or, if it works, at least it pins down the problem more precisely as an ADE related issue, and maybe it can be tracked from there.

When attempting to transfer ebooks from library to Nook I get error message "Failed to write destination file."

Any help here? The ebooks work fine on the computer, so it's not the download itself that's the problem.

I did that prior to coming here. I've done everything that is mentioned there with no change in the situation.

Error 1477 on remote management

Every time I try to start a remote management session i get the error 1477
"Failed to write to eDirectory". I can't find much on this error. The only
problem seems to be with ipx only 4.x servers.
I run Netware 6.5 sp5 with zen 4.0.1 with its latest ir patch.
The workstation has the latest zen agent and runs win xp sp2 with firewall
fully disabled.
When sniffing packets on the destination machine i see it communicating
with the edirectory and requesting policies.
On the workstation the logs report that the connection with the agent was
unexpectedly closed.
Password based remote management works perfectly.
Anyone has an idea what could be wrong??

Rob,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Got Generic:113 - Failed to write request headers

I am trying to get a client_request, but got Error Code: generic:113 and Error phrase: Failed to write request headers. Stepped through the code, and it went <g class="gr_ gr_276 gr-alert gr_spell ContextualSpelling" data-gr-id="276"
id="276">though</g> the client.request but jumped out the then. Not sure what I did wrong here. Thanks!
pplx::task<void> HTTPStreamingAsync()
http_client_config client_config;
web_proxy wp("my internal proxy");
client_config.set_proxy(wp);
http_client client(U("http://www.google.com/register/"));
std::cout << "Client Connect" << endl;
return client.request(methods::GET).then([](http_response response)
std::cout << "Get response" << response.status_code() << endl;
// Print the status code.
std::wostringstream ss;
ss << U("Server returned returned status code ") << response.status_code() << U('.') << std::endl;
std::wcout << ss.str();
// In this example, we print the length of the response to the console.
ss.str(std::wstring());
ss << U("Content length is ") << response.headers().content_length() << U(" bytes.") << std::endl;
ss << U("Content is ") << response.to_string().c_str() << endl;
std::cout << "response string" << response.extract_string().get().c_str() << endl;
std::wcout << ss.str();
int main()
try{
HTTPStreamingAsync().wait();
catch(http_exception e)
std::cout << "In an Exception: " << endl;
std::cout << "Error Code: " << e.error_code();
std::cout<< "Error Phrase: " << e.what() << endl;
//return -1;
return 0;

I am trying to get a client_request, but got Error Code: generic:113 and Error phrase: Failed to write request headers. Stepped through the code, and it went <g class="gr_ gr_276 gr-alert gr_spell ContextualSpelling" data-gr-id="276"
id="276">though</g> the client.request but jumped out the then. Not sure what I did wrong here. Thanks!
pplx::task<void> HTTPStreamingAsync()
http_client_config client_config;
web_proxy wp("my internal proxy");
client_config.set_proxy(wp);
http_client client(U("http://www.google.com/register/"));
std::cout << "Client Connect" << endl;
return client.request(methods::GET).then([](http_response response)
std::cout
<< "Get response" << response.status_code() << endl;
// Print the status code.
std::wostringstream ss;
ss << U("Server returned returned status code ") << response.status_code()
<< U('.') << std::endl;
std::wcout << ss.str();
// In this example, we print the length of the response to the console.
ss.str(std::wstring());
ss << U("Content length is ") << response.headers().content_length()
<< U(" bytes.") << std::endl;
ss << U("Content is ") << response.to_string().c_str()
<< endl;
std::cout << "response string" << response.extract_string().get().c_str()
<< endl;
std::wcout << ss.str();
int main()
try{
HTTPStreamingAsync().wait();
catch(http_exception e)
std::cout << "In an Exception: " <<
endl;
std::cout << "Error Code: " <<
e.error_code();
std::cout<< "Error Phrase: " <<
e.what() << endl;
//return -1;
return 0;

ERROR: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

ERROR: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

Error 1402 | Error 1406 | Acrobat, Reader
Error 1603: A fatal error occurred during installation

Disc recording log; Finder: Write (10), block: 4294967146, count: 32 - 3/73/03 Medium Error, Power calibration area error, Burn failed

Hello All Apple Heads (Brit. short for headmaster or headmistress.)!
My MATSHITA DVD-R UJ-846
(Firmware Revision: FQ3T, ATAPI, Burn Support: Yes [Apple Shipping Drive], Cache: 2048 KB, Reads DVD: Yes, CD-Write: -R, -RW, DVD Write:-R, -RW, +R, +R DL, +RW, Write Strategies: CD-TAO, CD-SAO, DVD-DAO), optical super drive is unable to burn on any CD or DVD.
The Disc Recording log list below writes: "Finder: Write (10), block: 4294967146, count: 32 -> 3/73/03 Medium Error, Power calibration area error, Burn failed".
DiscRecording.log:
Description:          Disc recording log
Size:          2 KB
Last Modified:          11-09-15 4:50 PM
Location: /Users/-/Library/Logs/DiscRecording.log
Recent Contents:          Finder: Burn started, Thu Sep 15 16:40:47 2011
Finder: Burning to CD-R media with SAO strategy in MATSHITA DVD-R   UJ-846 FQ3T via ATAPI.
Finder: Requested burn speed was max, actual burn speed is 24x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Write (10), block: 4294967146, count: 32 -> 3/73/03 Medium Error, Power calibration area error
Finder: Burn failed, Thu Sep 15 16:41:57 2011
Finder: Burn sense: 3/73/03 Medium Error, Power calibration area error
Finder: Burn error: 0x8002006D The disc can't be burned; it might be incompatible with this disc drive. Please try a different brand of disc, or try burning at a slower speed.
Finder: Burn started, Thu Sep 15 16:43:37 2011
Finder: Burning to CD-R media with SAO strategy in MATSHITA DVD-R   UJ-846 FQ3T via ATAPI.
Finder: Requested burn speed was 8x, actual burn speed is 8x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn finished, Thu Sep 15 16:49:31 2011
Finder: Verify started, Thu Sep 15 16:49:31 2011
Finder: Verify failed, Thu Sep 15 16:50:20 2011
Finder: Verify sense: 3/02/00 Medium Error, No seek complete
Finder: Verify error: 0x80020063 Verifying the burned data failed.
Can this issue be solved by means of firmware/updates, terminal command lines, or through other open source OS?
Is this issue related to lense cleanliness?
Much thanks!
Sam
Message was edited by: saltislandsam

I have also tried TDK, Maxell, Verbatim and Sony media
Me too. Out of that list the only brand that has NEVER produced a coaster (on the same burner as yours) is Verbatim DVD-R and Fuji DVD-R. All the others produced a 25-50% failure rate.
Have you tried burning at a slower speed?
Using 16x DVD media is fine - in fact it is difficult to buy any other - but there is a consensus in the Apple Support Forums that a slower burn is a better burn i.e. 2x or 4x (slow burns are better burns!). I always use Toast for burning.
The term "Best" means the fastest speed that the drive told Toast it can write to a specific disc. The drive's firmware and info on the disc decide what speed burns are available. When you press the speed setting button in Toast (after inserting a disc) you'll likely see some speeds in italics and some in bold face. The ones in bold face are supported by that media on that drive. The fastest one is what Toast calls Best.
Audio CDs in particular should be burned at the lowest supported speed.
Verification is a good indicator the disc is burned okay. However, other DVD players can still have problems with the disc. Media problems with various drives is not uncommon. Slower burning may reduce the chance of those problems, and is one of the reasons why RW (read/write) media is always rated slower than DVD-R.
There are some interesting facts here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm and here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm
But many will tell you that the 'slower burn is best' theory is outdated. Who really knows? At the end of the day, if your home-made DVD was verified by Toast and will play anywhere on anybody's DVD player, then that is the result we are all after!

Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)

Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name:      Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID:      1005
Level:         Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla

If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Error message on brand new WLC2504; "Failed to write...."

Hello!
I have received a new WLC2504 for my lab, which is nice.... :-)
What's not so nice is that I get a mysterious error message on the console. It appeared when the wizard started at first boot and it apperars at every startup since.
I have gone through the wizard twice and reset to factory defaults in between but the error message persists. It looks like this :
(Cisco Controller)
Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
User: Failed to write I2C device: Input/output error
[i2c_wr_to_wdt_timer_reg]Got error -1 during tx.
User:
Is this unit ready for RMA/DOA or can I somehow force it into normal behaviour..?.. The GUI appears to be working normally.
Best Regards
Göran Blomqvsit
Sweden

I would suggest talked to TAC & RMA if that is their view on this.
Normally you should not get any errors like this on console, if it is working properly
HTH
Rasika
**** Pls rate all useful responses ****

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

[Flat File Destination [220]] Error: Failed to write out column name for column "Column 2"

I am using SSIS to extract fixed width data into a flat file destination and I keep getting below error. I have tried almost everything in this forum but still no solution. can anyone help me out to solve this problem.
[Flat File Destination [220]] Error: Failed to write out column name for column "Column 2".
[SSIS.Pipeline] Error: component "Flat File Destination" (220) failed the pre-execute phase and returned error code 0xC0202095
Thanks

Hi Giss68,
Could you check the Advanced tab of the Flat File Connection Manager to see whether the InputColumnWidth and the OutputColumnWidth properties of the Column2 has the same value? Please refer to the following link about the same topic:
http://stackoverflow.com/questions/10292091/how-do-i-fix-failed-to-write-error-while-exporting-data-to-ragged-right-flat-fil
If it doesn’t work, please post the sample data and the advanced settings of Column2 for further analysis.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Error 1477: Failed to write to eDirectory. Verify ...

Similar Messages

Maybe you are looking for