Error 148:3 when starting Photoshop CS4. [was: Adobe technician support]

I get this window when trying to open Photoshop CS4 (64 bit):
=====================================================
This product has encountered a problem which requires that you
restart your computer before it can be launched.
If you continue to see this message after restarting your computer, please
contact either your IT administrator or Adobe technician support for help,
and mention the error code shown at the bottom of this screen.
Error: 148:3
http://www.adobe.com/support/
======================================================
What do I do next?

Try Adobe - Adobe Licensing Repair Tool

Similar Messages

Getting error message when starting Photoshop CS3

I am getting the following error message when starting CS3:
"This application has failed to start because CML4.dll was not found."
The window title is, "Photoshop.exe - Unable to Locate Component"
Of course, the only button to push is the "OK" button (which should probably read - Something's f-d up. Press here to continue.) After pressing the OK button, CS3 starts and works without issue - so far. I guess I haven't actually used the part of the program that uses CML4.dll or just don't see any difference with or without it.
How can I resolve this issue - without reinstalling PSCS3? and why does it happen in the first place?

Nikon Scanning Software has CML4.dll as part of its package. I assume that the Nikon software did not install/uninstall properly and is causing the error. I have not gone back to do Nikon scans within Photoshop so I do not know if it affects performance. McAfee does not flag it as a virus, and other websites I referred to indicated no viral activity associated with the file.

Two Fatal Error Messages when Starting Photoshop

When I tried to start Photoshop CS6 Extended 64 bit today (out of the blue) I received two error messages and the program would not open:
1. Could not load actions because an unexpected end-of-file was encountered.
2. Could not initialize Photoshop because the preferences file was invalid (it has been deleted).
I thought it had something to do with maybe deleting a monitor calibration file as I think there might have been a third message about that (who can remember all of this), so I recalibrated the monitor and the two message above continue and the program will not start.
Any ideas?
Thanks,
Kent

Sounds like general preferences corruption.
You will likely need to go through the three-key preferences deletion process in order to get Photoshop functioning again.
Press and hold Control, Shift, and Alt simultaneously immediately upon cold-starting Photoshop. If you're quick enough to get the keys down, it will prompt you to delete all current preferences, which will lead to a reset of all preferences to defaults.
-Noel

How do I get rid of the repeated Microsoft R6034 Runtime Error appearing when starting Photoshop CS6

I have detailed the problem and the attempted remedies in an earlier request for help
(15th Nov,PS6 R6034 runtime error, in Photoshop General Discussion) but none were coming.
It is extremely frustrating and disappointing that Adobe can not be more helpful and effective in solving this problem.

I just got off of chat with adobe support. Very disappointed.
Nobody can find the correction for this error. Shame on adobe!
What happened to a once great company.
It is extremely frustrating and disappointing that Adobe can not be more helpful and effective in solving this problem.

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

When starting photoshop I get error 213: 19, How can I fix this

When starting photoshop I get error 213: 19, How can I fix this

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Error message when opening Photoshop CC

For the last month, I've been getting an error message when opening Photoshop CC that says:
"Could not load actions because an unexpected end-of-file was encountered"
I've been having to go back and use CS5 in order to get anything accomplished between this and my plugins not showing up (post about plugins in another thread).

See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

Error message when starting MaxDB instance

I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
"-24994,ERR_RTE: Runtime environment error
1,Cannot create ipc db directories for SID (OS error code 11000)"
Max DB version : 7.7.02
Does anyone have any specific pointers on where the issue could be.
Any help is greatly appreciated.
Regards,
Murali Narayanan

Hi gurus,
I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
MaxM

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error message when downloading Photoshop element 12 : Arvato Berthelman - Erreur de l'Assistant de téléchargement - Malheureusement, il y a un problème avec le lien vers ce fichier. Ce problème peut être dû au nombre d'utilisateurs en train de télécharger

Error message when downloading Photoshop element 12 : (I have bought the licence in a shop)
Arvato Berthelman -
Erreur de l'Assistant de téléchargement -
Malheureusement, il y a un problème avec le lien vers ce fichier. Ce problème peut être dû au nombre d'utilisateurs en train de télécharger le fichier, ou le produit peut ne plus être disponible. Veuillez réessayer dans quelques minutes. Si ce lien n'est toujours pas disponible, veuillez contacter le service clientèle à l'adresse [email protected] ou au numéro 604-915-5200.
==> BOTH @ and phone number are wrong !!

Hi Mireille56,
From where are you trying to download the software.
[email protected] is not an Adobe Support email.
Please try downloading Photoshop Elements 12 from : http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
Regards,
Rave
< Translated via Google >
Salut Mireille56,
D'où que vous essayez de télécharger le logiciel.
[email protected] n'est pas un e-mail de support d'Adobe.
S'il vous plaît essayez de télécharger Photoshop Elements 12 à partir de: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
Cordialement,
Rave

Error message when starting firefox

since I've installed the latest update (firefox 4.0.1) I get the following error message when starting firefox:
'''Type Error: Components.classes [TvPwm Component_CID] is undefined'''
I must then click on OK to get firefox to open => very annoying!
I'm using a ThinkPad laptop and the passwordvault which was perfectly available in the older version of firefox don't open in tools any longer, when forced via lenovo thinkpad tool, it daoesn't launch the asked for site either.
Thanks for helping me.
Claudia

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

N97 system error message when starting Maps

Hi all,
I do get a system error message when starting the maps app.
I know that this is not a new topic but I did not find after intensive search a solution.
- Firmware is updated
- soft reset done
- it seems that the app is not installed
- have deleted the cities folder and the qf file
Unfortunately no change - maps app does not start.
Not sure that this is important but I want to mention this for the sake of completeness:
- the maps did work once
- when I started them the next day and I was at a different location it still showed the location of the previous evening abnd did not recognize where the phone was
- after some time I could not start the the maps app.
Any help greatly appreciated!
Best

Ahhhhhh I want to scream. This phone is driving me crazy...so many problems.. latest among others is, opening maps it gives me the error like you all mentioned above.. so how and where do I go to download what you mentioned... and I did try to go into"download" and my phone just says I don't have enough memory to download anything.. HELP

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 148:3 when starting Photoshop CS4. [was: Adobe technician support]

Similar Messages

Maybe you are looking for