Error -14910 when trying to connect to network server

A user has a brand new (2 weeks old) Mac Pro 3.00GHZ quad running 8GB RAM that has started acting very strangelly this morning. I will break it down as it happened...
- When logging on, it brought up the connect to server dialogue BEFORE the log on screen. It would not allow us to cancel the screen for ages, but eventually the third restart cleared that.
- As soon as we logged on, it connected automatically to the server (without prompting for any password). From within apps, it was as if the server was not there, but a second connect would make the folders available. When trying to disconnect the first instance of the server, it prompted for an admin password and then said it was unable to disconnect.
- Ran a permission repair, which cleared that issue but presented me with a far worse issue...The user can no longer connect to the server with his username; Error -14910
- I then tried a whole bunch of other usernames to connect to the server but all failed. EVENTUALLY I was able to connect using the server's admin account, but obviously this is not ideal for my user.
Other info: OS 10.4.7 on Mac Pro and Server
Server is an XServe
I can supply any more information needed, This is urgent, so any help at all gratefully recieved

Time error. Sorted

Similar Messages

Error 8013013d - When trying to connect to Network

Can anybody tell me what this error means it is sometimes accompanied by a message "cannot find IP address.

Re: Error 8013013d
08-08-2008 05:47 PM I started to get the 8013013D error message when I changed the wireless encryption on my router from WEP to WPA-PSK. I would run through all the settings, input the SSID and the encryption password and then accept the PS3 defaults for the other settings. At the end I did Test Connection and the error came up. I knew the settings I was entering was correct, because I used them on my laptop to connect wirelessly. I tried a few more times, incase I had input the password incorrectly etc but always got the same error. I ran through it again, but this time I didn't select Test connection, instead I did the Turn Off the System by holding down the PS button. When I turned it back on again and checked the Network Settings | Settings and Connection Status List, all the information was there, including the IP address and DNS information. So for me, it seems the Test Connection caused the problem for me. Maybe it will help others. Cheers RDJFC Holy crap it worked!!!!!! thanks! I'm not much of a gamer nor a tech head so you really helped me out. thanks again

Error message when trying to connect to Game Server via Mobility Ware, Solitaire

Hello,
I am connected to the Game Center's server but when I go an play a game, specifically Mobility Ware's Solitare, I get the error message "Could not connect to Game Center Server" with options "cancel" and "retry". Retry does not work.
Please help

Hi Brian,
In Acrobat, security concerns dictate that you cannot specify an ODBC connection string by using the Driver=; syntax. Therefore, the client computer using the form needs to have a DSN pre-configured for ODBC connections.
Denver
Adobe Enterprise Developer Support

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

Getting error 789 when trying to connect with a PC remotely via VPN

When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

RMI Error when trying to connect to remote server

We are getting an RMI error (below) when trying to connect to a remote weblogic 9 server with mission control.
We are running a portal application on the app server. If we connect using mission control before the app starts then mission control connects successfully.
If we wait until the portal application is running then we get the following error when we try to connect:
Could not open Management Console for UAT Live (1).
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)
     at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
     at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo(Unknown Source)
     at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getMBeanInfo(RMIConnector.java:1031)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:262)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:297)
     at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:99)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:113)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:36)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:73)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:371)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
     at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:620)
     at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
     at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
     at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:290)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:139)
     ... 11 more
thanks

As poorem suggested, I would check that the time is the same on both the identity and vcac appliances. It has been a while since I posted this question but I believe that did get me past that specfic error. I changed the timezone on each and made sure the times were correct and the same.

Communication error occurred when trying to connect to server

I am using RAS SDK to connect to the BO server. While running the report for performing opendocument, it's giving the following error.
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
     ... 38 more
Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
     at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
     ... 52 more
Please help me to solve the issue

Using BO SDK i am connecting to the BO Report Server, to fetch the BO Reports, But while trying to run the report, i am getting the following error.
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
... 38 more
Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
... 52 more
Please someone help me with the following issue.

VISA Error -1073807194 When trying to connect to Dynamixel MX-28

VISA Error -1073807194 When trying to connect to Dynamixel MX-28
I'm trying to connect to a Dynamixel MX-28 and receive the above error when I run my VI.
The COM ports detected by the VI match the ones that I see in Windows 7 Device Manager.
Any other ideas?
I've attached the code I'm running below.
Attachments:
Single MX-28 Position Control.vi ‏23 KB

slow wrote:
I had no idea, actually. I'm just learning Labview (and was handed this code by the previous guy). I appreciate the help.
I'm guessing I need to replace the "VISA resource name" and "VISA resource name out" blocks (that are currently in the above linked VI) with the "VISA configure serial port" block?
In a related question, what would be the best way to expand this so that a larger number of servos could be controlled at once?
Would I just make multiple copies of the current blocks (with several position knobs on the front panel)? Would that make the most sense?
LOL I was making fun of the unusual place that NI put the VISA serial config, not being sarcastic about you not finding it. Sorry about that.
The config will go right before your write. If you turn on context help (the little ? in the upper right corner) and mouse over the various things on the block diagram and front panel, you'll see how to use them.
Not really sure about a desing suggestion. An array of position knobs to be indexed accordingly?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

OSStatus error -6602, when trying to connect to time capsule

OSStatus error -6602, when trying to connect to time capsule for back up.
I am prompted for my
How do I decode the error messages?

The information from a Google search indicates the error is generated when connecting to a PC share. So this may be some kind of error generated by the NAS' operating system. In any event I cannot find such an error number associated with OS X so if it is an OS X error number then it's not publicly documented. I would still think Synology's tech support should be able to help you since it is their device. If they sent you here then they're passing the buck.

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store as Cannot connect to Itunes Store

you are not alone! I get the same for weeks now and I got an itunes voucher for xmas!
enjoy ecuador you lucky liucky barsteward, I have been to honduras/belize/mexico/guatemala/peru/bolivia/chili but ecuador is meant to be BRILLIANT
so to recap obviously some glitch at apple!, sorry I couldn't help

TS1368 getting the error 0x80092013 when trying to connect to the store to buy music

getting the error 0x80092013 when trying to connect to the store to buy music

I can't dial: (Get 'call denied' message)
[email protected]
[email protected]
[email protected]
Is there a way to know this is being addressed? How would one start a support case on this subscription service?
Although I subscribe for service for my SX20's and Bridge, my jabber video account is a free account.
Update: At 1pm CT I am able to dial and connect.

TS1424 Getting error -1202 when trying to connect to My Wish List. Says there was an error in the ITunes store and to try again later. Any work arounds for this? I have no other problems accessing anything else.

Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

TS1424 I keep getting error -1202 when trying to connect to itunes store, any idea how to fix this?

I keep getting error -1202 when trying to connect to itunes store, any idea how to fix this?
Thanks

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

Error message when trying to connect Classic 120GB to iTunes An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerException

I too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying.

Error -14910 when trying to connect to network server

Similar Messages

Maybe you are looking for