Error 15 Occurred at Wait for GPIB RQS

I have a VI that works well, but occasionally gives my the following error at random:
Error 15 Occurred at Wait for GPIB RQS in Instron Test Logger.vi
Labview: Resource not Found
If I press continue my VI will usually run fine but occasionally it will give me the same error a second time. Also the error only occurs when I first fire up my VI. Once I dismiss the error the VI will run properly for days.

Jeff Bohrer wrote:
Crusher wrote:
Today I was using my VI and I got a different error on a different GPIB block. On the first GPIB Read block in the system I am getting an Error 6.
Also I was Finally able to find the error code table and here are the error descriptions:
6 EABO I/O operation aborted. This error occurs when the I/O operation is aborted due to timeout, ibstop, or Device Clear.
15 ESTB Serial poll byte queue overflow.
I attached my vi.
Message Edited by Crusher on 09-29-2009 10:40 AM
I'm not totally familliar with the instrument you are using but I see no place in your code where you tell it to assert RQS and under what conditions you do so. This makes some sense as if, the unit is not responding to the serial polls ??? it would eventually timeout and overflow the serial poll buffer. Can you post a link to the 8511 programming guide?
And is it possible to use VISA instead of straight GPIB?
Bill
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Similar Messages

HT1338 when I click on software update it says ''An error occurred while checking for updates.'' Why does it say that?

So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!

Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

Time out occurred while waiting for memory resources

Team,
I am have Microsoft SQL Server 2008 SP1( 10.0.2734.0) 64bit with application being SCCM 2007
I am getting below error in SQL error log ::
Error 8645: Severity 17, state 1
A time out occurred while waiting for memory resources to execute the query in resource pool ‘internal’. Re-run the query.
At first glance, i thought that it is issue of query not getting enough memory.
Searched on google but could not get way to resolve it or issue creating factor.
Chetan

Well,
Upgrade is what client is not willing to go for as of now.
They have rebooted the server and as of now, their SCCM application is working fine ( Not sure how reboot has solve the issue). We are not getting the above mentioned error also in SQL Log.
Looks like, rebooting server has cleared the memory jam.
Chetan
Restarting sql server service cleared buffer cache and any such query holding or requesting more memory so issue disappeared. You just delayed the issue not solved it. Next time dont reboot find out the cause . If you want to check whether your SQL
Server requires more memory have a look at below counters in link
http://social.technet.microsoft.com/wiki/contents/articles/22316.sql-server-memory-and-troubleshooting.aspx#How_to_test_that_your_SQL_server_is_facing_memory_crunch
If your say to business about what are drawbacks on running unsupported version I am sure they will apply SP3. There are loads of fixes and its quite possible your error may be related to any such fixed issue.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

My phone won't let me update software. message is-unable to check for update. An error occurred while checking for software update. What is wrong?

My IPhone won't let me update software. Mess is- unable to check for update. An error occurred while checking for software update. What is wrong?

amm wait..first download the latest software (7.1.1) from the verified page..
then after the download completes.. back up ur device !
then after the back up completes.. turn off ur device
after that process jst hold down the home button for about 10 seconds and without leaving the button connect the usb cable to the pc. this process takes ur phone to the recovery mode!
now on the itunes press (shift ) and then click on update it opens some opener of the files now select the latest software that u've jst downloaded from the internet now there go..

When I check for an update my I pod says, "An error occurred while checking for a software update."

When I check for an update my ipod says, "An error occurred while checking for a software update."
I have tried,
-Rebooting my ipod
-Hard rebooting
-Deleting some apps to get more memory
-Resetting network settings
-AND WAITING, but it still doesn't work
CAN YOU HELP!!!!!!!!!!!!!!!!!!!!!?????????????????

I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

Random "Error 28" when waiting for SRQ

I have written a VI Server to communicate with a device. It runs for some random amount of time when it gets Error 28 while waiting for an SRQ. There are three ways to check for an SRQ from the device, they all return error 28. I cannot find Error 28 documented. Any ideas?

Hello,
Are you using a GPIB ENET by chance? I suspect you are, and are seeing an error described in the following NI web document:
Title: GPIB-ENET and Error 28
Error: http://digital.ni.com/public.nsf/websearch/168219CDCFF462998625660B0053DB7E?OpenDocument
If you are using another product, or are having other troubles, definitely repost!
Best Regards,
JLS
Best,
JLS
Sixclear

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

SEVERE: An error occured while scanning for the next trigger to fire

Hi All,
I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
2.Under System Maintenance, select Scheduler Configuration.
3.Enter the database connection information for the target Oracle database and user.
Database Type: 10g
Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
Username/Password for the database user
Database Driver Class: oracle.jdbc.driver.OracleDriver
4.Click the Test Connection button to make sure the connection information is valid.
5.Click the Install Schema button to install the scheduler tables.
6.Restart the BI Publisher application.
The Schema installed successfully.
But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
INFO: Handling 6 triggers that missed their scheduled fire-time.
23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
SEVERE: An error occured while scanning for the next trigger to fire.
org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: Invalid column name
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
The system details are as below :
BI Publisher version : 10.1.3.4
Oracle DB : 10 G
Weblogic server :10.3.2
Please suggest to resolve this issue.
Thanks,
Sachin

Hi,
This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
Then try to start the server, and see if the server starts without error.
After that you can try to configure the scheduler from BIP console.
thanks,
sandeep

Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.

Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works.

HT4623 hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphon

hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

An error occurred while scanning for security updates. (0x80004003)

Has anyone seen this error: An error occurred while scanning for security updates. (0x80004003)?
This error occurs when I run the MBSA tool either locally or remote against a workstation. I also thought that the firewall may be the issue, it is not. I ran the MBSA tool on the WSUS replica and WSUS upstream server and received the same results. I
have been running the MBSA tool and have not run into this probem before.   I am running SolarWinds PatchManager on the upstream WSUS server and have recently configured the upstream and downstream servers to communicate, I imported
the certifcate from the WSUS upstream to the replica and noticed that after this we started having issues with the MBSA scans. Not sure if this is related but it is the only change between MBSA working and not working. P.S. The scan does
work when we use the offline scenario instead of pointing to the WSUS server.
Any help would be appreciated.
Thanks
bc

Yes, the log file was too large I have pasted the 2nd half after running MBSA on the server (the setting is to scan using Windows Server Update Services (WSUS) only.) This second half of the windowslog file shows errors after running MBSA
MBSA scan time was 9:44 PM
2014-07-31
19:38:35:487 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:44:14:497 216   2344
Report Uploading 4 events using cached cookie, reporting URL =
http://eus1:8530/ReportingWebService/ReportingWebService.asmx
2014-07-31
19:44:14:555 216   2344
PT     WARNING: ReportEventBatch failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:44:14:555 216   2344
PT     WARNING: SOAP Fault: 0x00012c
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
faultstring:Fault occurred
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
Message:(null)
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/ReportEventBatch"
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
ID:2b9836c5-3159-494b-ae27-72559d089586
2014-07-31
19:44:14:555 216   2344
Report WARNING: Reporter failed to upload events with hr = 8024400d.
2014-07-31
19:45:57:201 9128   12a8
Misc   ===========
Logging initialized (build: 7.6.7600.256, tz: -0400)
===========
2014-07-31
19:45:57:201 9128   12a8
Misc   = Process: C:\Program Files\Microsoft Baseline Security Analyzer 2\mbsa.exe
2014-07-31
19:45:57:201 9128   12a8
Misc   = Module: C:\Windows\system32\wuapi.dll
2014-07-31
19:45:57:200 9128   12a8
COMAPI -------------
2014-07-31
19:45:57:201 9128   12a8
COMAPI -- START -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:202 9128   12a8
COMAPI ---------
2014-07-31
19:45:57:218 216   2344
Agent *************
2014-07-31
19:45:57:218 9128   12a8
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:218 216   2344
Agent ** START ** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:45:57:218 216   2344
Agent *********
2014-07-31
19:45:57:218 216   2344
Agent * Include potentially superseded updates
2014-07-31
19:45:57:218 216   2344
Agent * Online = Yes; Ignore download priority = No
2014-07-31
19:45:57:218 216   2344
Agent * Criteria = "IsInstalled=0 or
IsInstalled=1"
2014-07-31
19:45:57:218 216   2344
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-31
19:45:57:218 216   2344
Agent * Search Scope = {Machine}
2014-07-31
19:45:58:410 216   2344
PT     +++++++++++ PT: Synchronizing server updates
+++++++++++
2014-07-31
19:45:58:410 216   2344
PT     + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:00:453 216   2344
PT     WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:46:00:453 216   2344
PT     WARNING: SOAP Fault: 0x00012c
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
faultstring:Fault occurred
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
Message:(null)
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
ID:e9b0d06e-d0c8-443f-abc9-512bc0f2cfa1
2014-07-31
19:46:00:481 216   2344
PT     Initializing simple targeting cookie,
clientId = e651f142-bc0f-467d-b416-d344215f5c0a, target group = EMCC Servers, DNS name = elf1.monarch.com
2014-07-31
19:46:00:481 216   2344
PT     Server URL =
http://eus1:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-31
19:46:18:451 216   2344
PT     +++++++++++
PT: Synchronizing extended update info +++++++++++
2014-07-31
19:46:18:451 216   2344
PT     + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:18:893 216   2344
Agent * Added update {92AEAB02-F8FC-4527-B285-50FDC8EF3F85}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {2212D902-7C3B-408E-96A3-ECE4D00BFAE6}.101 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {490BE004-BC5C-4EEF-AC82-769542FC3A2D}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {568C1005-5178-4C13-8486-18E2C5AF4834}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {D9F49D05-AC6D-4A2A-8150-D2B4B730DEED}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent * Added update {74844E07-2F55-40D4-9E16-E17A2815FEBE}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {3C72A908-F3CD-413D-B2BF-ECB68D24B6FE}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {50990D0B-4795-4830-9C3A-753485B2D433}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {9DB82D0B-5611-4BC1-A4B8-432FE1A3CC43}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {7BB7B30C-351D-4F8C-ABE4-5F7965635A03}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {AEF6280F-8C4D-4804-9913-407582227E75}.202 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {16BB6A11-B540-4486-AB13-F3B9789E90B5}.105 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {1B127611-D28E-4167-A1DC-243A51BC528F}.203 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {2F6F2013-2990-4FA6-8AB9-CA59DCA4E62D}.202 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {21732D13-3D34-4DD7-B663-32F2A1631EA9}.105 to search result
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {E879EE15-340D-442C-B8A4-CF91D18C1B6B}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {99FEC317-44CD-40B4-B67E-94C840510983}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent * Added update {8096C018-252D-4C32-BC9E-F33AC67ECFF1}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {ECCC4D19-3032-4C82-91AB-A31560B13F80}.205 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {BB49CC19-8847-4986-AA93-5E905421E55A}.103 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {023BB023-490F-4DF3-BCAA-9521EE8B5847}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {9676C624-58CB-4A30-B7B3-1D013CF3DBBC}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {1BB3DE24-0D76-4D59-9B9E-556722BFE852}.101 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {F4695A25-0D22-4E3B-9BA9-9BBC62198C28}.103 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {11152F27-ACCA-4438-B21D-A0B61480D33B}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {308DE327-7354-4481-9981-DEA0FC61925E}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {16E9C62D-05B2-4E14-BFB0-CF55EDBD4F61}.106 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {C750962E-9D5E-45CE-9967-AE2D67115966}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {9F7D6930-6816-423A-AF3C-C83ADFA7F612}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {497BCC31-ACF7-46E2-B664-C79FD2D39F8B}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216   2344
Agent Update {E00B2634-BEF9-4C32-B2BF-DEAF7D7221E4}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:894 216   2344
Agent * Added update {7738E837-B152-487B-8527-CD3A9C0E43E3}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {39757C3A-7ABE-4418-8B2A-C7EA7D88B36A}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {A8968B3A-7FB5-4089-888F-4CDB14055DE9}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {E6ED643C-8611-4453-A723-9847B7BF60EB}.103 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {C499223D-2F22-4626-BBE5-F5A35E7A5854}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {48BEEF41-9D2D-4E72-9A61-59F98B12C07A}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {2661BD46-2980-4FCF-A062-B3A0C7820663}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {DC548E48-407C-48E1-ACA4-6B4C0DF14E69}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {ED981249-8D8F-42A1-87DB-0AB5C07430B2}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {18FEE64A-1E7F-4932-8158-E8AB241F3A1A}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {3732354D-3DAE-4E71-B82C-61A12C300F72}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {3061954E-EDAA-4625-837C-CE768D68927D}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {78F92451-801A-40F5-9582-CB8D1CA993BE}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {ADA7CF51-66B0-4A00-B37B-68D569D6FF8B}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {345B0353-DFC6-48CC-A6B6-A490CA26B503}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {1330DB53-75FF-4D87-9270-6A5449A67AD7}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {E35E5957-A5A9-4576-9D54-314A34C47C53}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216   2344
Agent Update {DC17765A-6814-47AD-9F54-5BFBCBF95FB0}.101 is not a valid bundle. Not
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CEFF8CA0-08DB-41D0-B825-FCC2CEBAF8B4}.108 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {2FECFFA0-44C8-4719-8F72-EC7BD8EDB793}.1 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {2BDE2BA3-EF93-49C6-A3C6-A806835A680F}.200 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {0B8586A5-EEB6-4DC0-BCDA-2635C7E12B55}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:895 216   2344
Agent Update {A6BD61A7-CC63-4068-8510-AA5268FB03E8}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:895 216   2344
Agent * Added update {4C0BA6A7-A8F0-417E-B9DA-906207429CE6}.204 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CE9876A9-83BF-4EDC-8793-4CBD6F3A6C5A}.202 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {63A011AC-FF81-44B9-811C-BECE5DC6C34B}.101 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {4A0A69AD-4237-43E7-8FB9-5A814361EC76}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {E17C01AE-BACC-4147-97AD-51A0708126D2}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CB1F1FAE-F738-49E7-AE3E-7A0C2308838B}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {9696B7B0-FF6F-4AA6-B29C-E0200CB6EB79}.200 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {B58F24B1-58A0-4661-9882-0FF509712946}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {E47BE4B1-5EF0-442F-995F-C000D5AFF062}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {D68E0CB2-9501-405E-AF9C-156F352D6735}.107 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {09593FB3-C94B-4A07-84C4-2E60703AD644}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {B8315ACF-BF26-4C3A-979B-80A46D06697F}.200 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {013AF7D6-EC9F-4DEF-AE41-007D211F9FBC}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {6E3C01DB-6977-46D2-A537-00F53DA0B3B3}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {9842D9DB-8AE8-4F0B-B974-66787AEC8FBC}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:896 216   2344
Agent Update {0C1447DC-904E-4DCE-B208-50741D1CC65C}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:896 216   2344
Agent * Added update {DD7619DD-D6A6-4765-8406-612FD79583BA}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {ABB0AFDD-4B0A-4C3E-8341-07EA3941C465}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {B66BA1DF-4BC1-4145-859F-239C9F9BB5A0}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {E2C928E1-BE92-4715-817D-FD6090F2FB07}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {C16FDFFD-A0D3-49EB-A8EB-B8F5E21D52C3}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {57260DFE-227C-45E3-9FFC-2FC77A67F95A}.104 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {5BCDA2FE-A3F5-42C9-91F0-823230942BD8}.204 to search result
2014-07-31
19:46:18:897 216   2344
Agent * Found 151 updates and 95 categories in search; evaluated appl. rules of 1327 out of 2207 deployed entities
2014-07-31
19:46:18:918 216   2344
Agent *********
2014-07-31
19:46:18:918 216   2344
Agent ** END
** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:46:18:918 216   2344
Agent *************
2014-07-31
19:46:18:932 216   2344
Report REPORT EVENT: {A427D5D8-F546-4FBB-9F5F-931DF1F46063}
2014-07-31 19:46:18:898-0400      1
147    101    {00000000-0000-0000-0000-000000000000}
0       0
MBSA   Success
Software Synchronization   Windows Update Client successfully detected 151 updates.
2014-07-31
19:46:18:932 216   2344
Report REPORT EVENT: {C8151494-E563-4AEB-B37F-14FD7864BF5D}
2014-07-31 19:46:18:898-0400      1
156    101    {00000000-0000-0000-0000-000000000000}
0       0
MBSA   Success
Pre-Deployment Check Reporting client status.
2014-07-31
19:46:18:933 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 9128   2550
COMAPI >>-- RESUMED
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:18:934 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:19:032 9128   2550
COMAPI - Updates found = 151
2014-07-31
19:46:19:033 9128   2550
COMAPI ---------
2014-07-31
19:46:19:033 9128   2550
COMAPI -- END
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:19:033 9128   2550
COMAPI -------------
2014-07-31
19:46:23:918 216   2344
Report CWERReporter finishing event handling. (00000000)
bc

An error occured while checking for a software update!

unable to check for update,an error occured while checking for a software update! thats the one who appear to my setting please help me!

Hi there,
You may find the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Oracle Error occured, while checking for Already Committed data

Hi,
In my 1 day old workspace I see more than 3000 errors logged in the owb_error_log_table with text as shown below , can someone from Oracle please advise what the problem seems to be ?
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.2.en_GB
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.2.en_GB
There are many more examples of other errors as well. Google returns nothing for these error....am I the first one to face these errors. We are using 11gRelease2 on RHEL.
They all have a error text of ORA-01403: no data found
tks in advance.

I haven't been able to pin it down to a specific action that causes these errors. I have been having various other problems when importing tables ...the screen just freezes and nothing happens. When I queried this table from sql developer to check if I can spot anything and I found these errors.
The screen freezes when I add a new oracle location - the test works fine - but when I click OK to the add oracle location screen it just freezes and nothing happens.

Error 15 Occurred at Wait for GPIB RQS

Similar Messages

Maybe you are looking for