Error 150:30 when I start my CS4. What do I do?

I reinstalled my old MacOS to get rid of Maverick. Now I can't use my CS4 programs. What do I do to be able to use my CS4 again?

Hi Superfly,
When you try to start an Adobe application on Mac OS, you receive the error, "Licensing for this product has stopped working."
Perform the solutions below in the link .
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Important: Continue to the next solution only if a previous solution does not resolve the problem. After performing some of these solutions, you are required to re-enter licensing data or activate your product. Furthermore, tryout editions of Adobe software are sometimes prevented from starting.
Same issue has been discussed in the below mentioned thread also.
http://forums.adobe.com/message/4752665
Let me know if it helps.
Thanks!
Eshant

Similar Messages

  • I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3

    I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3.
    The application was restored from a backup using Apple Time Machine.
    I would reinstall the applications, since I have the original disks, but alas, the Mac Mini has no external drive.
    Any ideas?

    CS4 is untested and unsupported under 10.9.x
    That said, you should uninstall everything run the cleaner tool and then download the CS4 installer and try it again.
    If that doesn’t do it, you’re on your own.
    Cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Download link for CS4: http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  • [problem]Error "sfntread library error (83::4)" when you start After Effects CS3 (Windows)

    Hello,
    I am experiencing the above stated problem in the subject. I downloaded the trial version off the website. But when starting the program, i got the error:
    Error "sfntread library error (83::4)" when I start After Effects CS3
    I tried looking at resolving it through the help posted in the support site.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402858&sliceId=2
    Apparently, the value which was asked to change, it was already set to "0"
    Is there not anything else I can do?

    Well, I have no more detailed info for you, but if this error (and other, similar ones) pops up, it is usually a good idea to take a look at your shared Adobe components and other Adobe programs. The error itself seems related to the Adobe font system and/or generic vector rasterization engine such as it is also used by Acrobat and various import/ export filters. Therefore a good place to start is to remove any fonts on the system that you don't need. The engine may simply be trying to load them and then fails because they are damged or have some otehr ominous info. If that fails, look into what otehr apps you have on the system. Run the Adobe Updater to make sure you have all the latest versions. If it still does not work think about uninstalling the products. I know it's a pain, but it may get AE to function. As a helper, use the CS3 Clean scripts from the support pages. These will work a little faste and really kill everything (compared to a normal uninstall), Just make sure to deactivate before uninstalling, or you may run into trouble when trying to reactivate.
    Mylenium

  • Why do I get error 150:30 when I try and send a photo to Elements 8?

    Why do I  get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?

    My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
    http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
    Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
    Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
    Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
    Turn off your phone and then turn it back on.
    Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
    John

  • What is error 150:30, and why won't CS4 work after moving it from old mac to new?

    What is error 150:30, and why won't CS4 work after moving it from old mac to new?

    Reinstall the software properly
    Mylenium

  • Error 150:30 when I try opening InDesign (CS4) on my new macbook pro.

    I keep getting Error 150:30 after setting up my new MacBookPro and restoring from backup. When I open InDesign (CS4) it says Licensing for product has stopped working. PLEASE HELP!

    Hi there,
    I'd try a fresh install. You can download the installer here: Download CS4 products
    Please make sure you are signed in with Adobe ID first.
    Here's more info on the error code: Error "Licensing has stopped working" | Mac OS
    Let us know how it goes!
    Amy

  • Need to download - design premium CS4 - I'm getting error: 150:30 when I try to open PS

    I had CS help me a few months ago to re-set or load my CS4 Design Premium, when I changed 2008 imac to Mavericks.  Now I can't remember how we did that.  Now the issue is that I need to do the same on my new Macbook pro (also Mavericks)- Somehow the Suite seems to have loaded all programs, and clicking on one says to restart and then says " but if that doesn't work, then reach support." so here I am.  Can someone help asap?  Second question today.  thanks

    Hi madsea,
    There could be issues while loading CS 4 on Mavericks due to incompatibility of OS and software. Please check out the system requirements for CS4 from the link mentioned below.
    System Requirements : System requirements | CS4, Point Products
    For Error -150 : 30 | Error "Licensing has stopped working" | Mac OS
    You can certainly try if it works for you. Links for download and installation are mentioned below.
    Download : Download CS4 products
    Install : Install CS4 products | Windows, Mac OS
    Thanks,
    Atul Saini

  • I have error 6 message when trying to open cs4

    When i open my cs4 i have an error 6 message.  I have been using this for 4 years with no problem and now it shows me this!  This is so frustrating! 

    Try these help pages:
    http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
    or
    Error "Licensing has stopped working" | Mac OS

  • Error 150:30 OSX 10.8.5 CS4

    Hi!
    I have an error 150:30 comming up since I unfortunately upgraded to Maverick and made a roll back to a 10.8.5 using a time mashine back-up. I have a MBP. Any fast advises? Nothing works: CS4, ID, Ai, Acrobat Pro...
    Thanks

    Adobe applications don't support migration because they have too many components too many places. Probably also true for Time Machine backups. Reinstall from the original media (or your backup).

  • Why am i getting error 150;30 when i click on edit

    Why am i getting error code 150:30 when I click on edit in Photoshop Elements 8. Says my licencing has stopped working.

    Exactly, and if using IE the error code doesn't appear and the media with play straight away, so it does seem to be directly related to Firefox...

  • Unknow error in consol when sqldeveloper started

    When I start sqldeveloper I get the following in the console:
    E:\sqldeveloper\sqldeveloper\bin>sqldeveloper
    Feb 25, 2010 4:04:00 PM javax.ide.extension.ElementVisitor log
    SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.jar!/META-INF/extension.xml:16: Duplicate declaration of addi
    n oracle.dbtools.migration.workbench.core.MigrationAddin. Previously defined in extension oracle.dbtools.migration
    Feb 25, 2010 4:04:00 PM javax.ide.extension.spi.SAXManifestParser$Handler endElement
    SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.jar!/META-INF/extension.xml:22: Exception processing manifest
    : java.lang.NumberFormatException:For input string: "VIEW_CATEGORY_MENU"
    java.lang.NumberFormatException: For input string: "VIEW_CATEGORY_MENU"
    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    Plus another 500 or so lines. If I can answer the firstone maybe the rest will go away.
    Does anyone know what will cause this error?

    from Metalink/MOS:
    As of now there is no separate MOS community for SQL Developer.
    There is an active SQL Developer forum on OTN site.
    Database -> SQL Developer
    SQL Developer
    That's how I got to this forum

  • I keep getting error 150:30 when I go to open my photoshop and it told me to contact adobe.

    I went to open photoshop so I can open acrobat and it tells me error 150:30

    Hi kimberly%20burg,
    Could you please elaborate the issue that you are facing.
    What exactly is the error that appears on your screen?
    Why did you need to open Photoshop to open Acrobat? Are you facing a licensing problem?
    What version of OS and Acrobat are you using?
    Let me know more, please.
    Regards,
    Anubha

  • Received error message A12E1 when updating desktop cloud.  what to do?

    Received error message A12E1 when updating cloud on my desktop?

    Daniel Fidler for information on how to resolve an A12E1 error please see A12E1 error installing Creative Cloud products | CC - http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html.

  • Error 150:30 when launching InDesign CS4

    I have Photoshop and Lightroom CC, but still use InDesign CS4. The full error message is
    Any advice would be appreciated!
    Thankyou

    Happy story.
    I found this page - Error "Licensing has stopped working" | Mac OS
    and followed the step by step using the OSX10.7 instructions, and using "LicenseRecover.py" file (from the download you directed me to) in the terminal window .
    Seems to be working fine now.
    So, thankyou again Peter. I'm always blown away by the help available on forums from people like you.
    PS. Can't help but feel I'm being pushed into a CC subscription for InDesign. S'pose it's inevitable.

  • Error in CS5 when rendering from a CS4 project.

    Hey guys,
    So I recently upgraded to a 64 bit machine with CS5 on it after using After Effects CS4 on my old 32 bit computer. When I open these projects and try to render them on my new machine, I get an error message that I haven't ever seen before.
    It says:
    "After Effects: This project was unable to import the settings of some output modules. Those modules have been reset to their defaults."
    When I select "OK", the dialog box just keeps reappearing.
    Any ideas?

    You have incompatible output modules on your render queue because a lot of stuff has been changed for CS5. This affects pretty much all MPEG ones, WMV, Quicktime... Simply delete them and reassign the comps to the RQ with the new settings.
    Mylenium

Maybe you are looking for