Error 16 after inatalling flash CS5

i try to install Flash Cs5 from this morning disable the antivirus close all aplications and reinstalling 6 times and allways i get this error 16 and try to download again but dont download how i fix this error 16 or why i get this error?

Yea same here....I got CS4 installed too.Is this coz of any conflict or file missing?? Coz in the loading stage...i get this error when it loads
workspace.dll.I downloaded the trial from Adobe only.Please reply fast!!Its urgent

Similar Messages

Error message starting up Flash CS5 -- appears to be caused by welcome screen

Hello,
I am running windows 7 64-bit, flash player debug (10.1 from labs) and CS5 Master collection.
I staretd noticing an issue today -- Flash Professional CS5 has begun to freeze on opening it. I eventually get the message "a script in this movie is causing flash player to run slowly. if it continues to run, your computer might become unresponsive. Do you want to abort the script?". At this point, I am not running any movies, I am just trying to open flash Pro CS5. When I choose to click "yes" (eg abort the script), then the buttons on the welcome screen do not work. When I click "no" (and do not abort the script) then flash crashes some time in the first 5 minutes of authoring.
I also noticed that if I disable the opening page (check "do not show again") and reopen flash -- then no problem
Any ideas on what is happening - anyone?
Thank you

Hello
Just wanted to report back this was a simple issue -- it turned out to be a corrupted configuration file for Flash CS5. I called Adobe tech support and an engineer helped me to do the following. Please remember I am running windows 7 (64 bit), so this is what I did for that OS ...
First I closed flash CS5 pro. Then I navigated as follows ... from the C drive ==> then to the users file ==> then to my user file ==> then to appdata (this is normally hidden, so just unhide files or type appdata as next drill-down in navigation window after your user file) ==> then to Local ==> then to Adobe ==> then to Flash CS5 ==> then to en_US ==> then to configuration. Then I renamed the configuration file (to configurationold)
I restarted flash pro CS5 -- and problem solved.
Thanks kglad and everyone
Bob

MSI Gaming 5 Z97 00 Error Code after Bios Flash

Was using a USB for bios flash through the uefi bios. I chose ME flash, and it flashed ME then rebooted and then flashed the bios and then it finally rebooted but to a black screen. After a few minutes, I restart the computer and it has an 00 error code now. I removed the graphics card and cleared the CMOS.

Quote from: HighMans on 05-October-14, 04:04:37
I flipped the PSU off, I always do that.
remove the power cord itself from the electrical outlet
after that proceed with >>Clear CMOS Guide<<
Quote
PSU:
12v rail Rating of listed PSU: 384W
CPU: G3258
Memory: Corsair 8GB XMS
SSD/ HDD: Seagate 1TB and a PNY SSD
CPU COOLER: Coolermaster Hyper Plus 212
Raid Card: N/A
Sound Card: N/A
Any Additional hardware plugged into your system: N/A
OC: (Yes / No) Yes
Operating System: Windows 8.1
Quote
PSU:
12v rail Rating of listed PSU: 384W
PSU brand and exact model?
Quote
Memory: Corsair 8GB XMS
how many memory sticks?
exact models?
Quote
SSD/ HDD: Seagate 1TB and a PNY SSD
have you tried to disconnect them both?
Quote
OC: (Yes / No) Yes
that's not good idea to flash your BIOS when the system is OCed

Error Message After Updating flash

I just finished reformatting my hard drive and i was using
the internet. I got this message at the bottom of my computer
"there is a new version of micromedia flash click here to update"
so i clicked it. Now whenever i go to a web site that uses flash i
get an error message! and the whole thing will close. Can someone
plese help me!

Hi Pat,
When I click on the link to http://get.adobe.com/uk/flashplayer/ I am
redirected to http://get.adobe.com/es/flashplayer/ which is also where I
end up if I pick any European country with English next to it from the
country options on the bottom left of the adobe install flash page.
I bought a new laptop last year with windows 8 which has since been updated
to 8.1 I am not sure when/how I installed Flash but it was definitely
listed in add/remove programs and I uninstalled it this morning. However
IE does still report that Flash is installed. I think I am just going to
leave things alone, if something that doesn't have Flash needs it I will
look again. But somebody at adobe does need to look into the bizarre
redirect to an install page in Spanish.
Thanks, Andrew
From: Pat Willener [email protected]
Sent: 04 April 2014 10:33
To: AndrewColclough
Subject: The installation page is displaying
Spanish
Re: The installation page is displaying Spanish
created by Pat Willener <http://forums.adobe.com/people/pwillener> in
*Installing
Flash Player* - View the full
discussion<http://forums.adobe.com/message/6270909#6270909

Bug: Flash CS5+CS4 Professional crashes when compiling AS2 classes.

My name is Mario Gomes Cavalcanti, I'm the CEO of Mersica Inc. and the developer of the free, online graphic design software, image and photo editor Fatpaint.com.
Fatpaint is a Flash application, made using the Actionscript 2 programming language. This week we added some new functionality to the source code and after that, Flash CS5 professional IDE can no longer compile the project, it crashes on every attempt without any error messages.
We are talking here about a huge project with around 360 Actionscript 2 classes. The size if the our last successful compiled SWF file was around 800 kilobytes. This compilation wa done last week, prior to the latest addition/modification of source files. The project is mostly made of Actionscript 2 source code, it do not have much other stuff in it.
I would like assistence is resolving this issue... Why does Flash CS5 crash when compiling my Actionscript 2 classes?
I would like to send the project and source files to the developers of the Flash actionscript 2 compiler, so they can see why it cannot compile my files.
Fatpaint.com is probably the Flash application with the most sourcecode (classes) so I think it has something to do with that.
My system:
Windows 7 64bit
Adobe Flash CS5 professional version 11.0.2.489
Thank you.

We managed to compile the project using Flash Pro 8, and we also got in touch with Adobe and sent them the source files of our Flash editor.
It's been a month now and they still have not released a fix.

Error message boxes on duplicate drag in Flash CS5.5

Hi I wanted to report a problem I've been having with Flash CS5.5 on MacOS 10.5.8
When I drag an element (usually a line or shape) with the alt key pressed (in order to create a duplicate on the stage) sometimes I get a couple of message boxes appear that say "Panel x could not be created removing it from the list" where x is a number like 7 or 9. After I click through these the swatches panel appears in the middle of the screen.
This is quite annoying and holds me up as I have to click through these boxes & then close the swatches panel.
Hope you're able to address this error in future builds.
Cheers
-Tom

These are primarily user to user forums. USe the following if you have a bug to report:
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Runtime error running Flash CS5

Hello,
I have this weird issue with Flash Professional CS5. It has worked just fine for me in the past but when i try to start it now it gives me the following error:
"This application has requested the Runtime to terminate in an unusual way.
Please contact the applications support team for more information"
What could be causing this error and more importantly how do i fix it?
Thanks in advance

The title of the pop up is Microsoft Visual C++ Runtime Library.
Then it shows the folder where Flash.exe is located.
I think that the last time i used Flash is about 2 months ago and it worked fine. Now i can´t start the program at all cause of this error.
The error occurs after it tries to load the program.

Flash CS5 ActionScript not working after 2-3mins

Hi,
I am using CS5 Design Premium and encounter a very crazy flash problem..... i used the AS3 and made an object move for 100 frames. Added a AS to stop at 50th frame. basically using stop(); for the AS. but it doesnt work when i test it. so i close and open the flash CS5 again and tested it and it worked. after about 2-3mins into using the program i didn't touch anything and test the movie again and it doesnt stop at the frame with the AS. So i tried closing the program and opening it again and tested it and worked again.....so i did a few try and error and found the software i open for the first few minutes tested the movie and it function normally but once after a couple of minutes the AS no longer worked.
can i know if there is any settings to ensure AS is being detected through out the using of the software or it is the software having some problems?

You should provide the code you're using and describe what it's supposed to be doing. While it might be a bug in CS5, it is possible the code is causing the performance issue.

Runtime Error when launching Flash CS5 in Windows Vista 32bit

I installed Flash CS5 as a Trial and when i tried to launch it the error message appears on the screen:
Visual C++ Runtime Library
Runtime Error
This application has requested Runtime to terminated it in a unusual way.
Please contact the applications support team for more information.
I already tried to re-install Vista again and even tried to install flash in XP with the same unsucess result.

Hi Fmk,
It would be great if we have the installation log files. However you can try these.
1.Check whether your system meets the minimum requirements.
2. Install the current Windows Service Pack and other updates.
Try reinstalling.
Regards,
Bobby Johnson.

ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.

I have encountered the following errors during installation, My OS is Window 8.1 pro. .
What should I do, thanks
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW066: OS requirements not met for {B4749B38-C5BD-4A02-8E9F-C1EF7CCEA651}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

renka,
When you uninstall and reinstall, it is always worth running the Cleaner Tool in between.
http://www.adobe.com/support/contact/cscleanertool.html
Apart from that, you may try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
or you may hope that some staff sees it here in this forum.

Creating a SDK (.swc) in Adobe Flash CS5 - Error + Best Practices Questions

Hello all,
I'm currently developing a client library for a server-based API which is developed by my company.
The goal is for the .swc to be usable in both Flash and Flash Builder (any Actionscript environment, really). So far I've just been creating it in Flash CS5 and have yet to test it in Flash Builder. It contains a single piece of UI (a login window) but is intended to expose a number of actionscript classes as API interface points to the developer. The login window is a single Movie Clip placed onto the stage. I have been testing by simply running the Flash project for the SDK and it works well.
However, I run into problems when I attempt to use the SWC in other projects (I have the Flash project for the SDK set to create a SWC as well as a SWF)...
I link the SWC to the other project using the flash compiler settings
com.mycompany.SDK is a class required for initialization (singleton) and com.mycompany.LoginWindow is the UI window for logging in
The developer needs to call SDK.Initialize(), which seems to work fine
When the following code is added I get the below error: addChild(new LoginWindow())
1046: Type was not found or was not a compile-time constant: InstanceInfo.
I take it that the error is a result of an undefined class - but I cannot figure out where InstanceInfo (it is not a class of mine) is being used or how to fix this...

Found a good example that helped me figure this out.
http://www.adobe.com/devnet/air/flex/quickstart/articles/xml_prefs.html
Will share the results when complete.
Thanks

Adobe Flash CS5 Installation: Error, Exit Code: 7

So I was installing Adobe Flash CS5 and ended up with this error.
I've been looking around the forums, and trying several things, but nothing seems to be working. I uninstalled Flash CS4, and used the Adobe CS5 Cleaner Tool.
Help and guidance would be much appreciated.
~Thank You~
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 58 error(s), 59 warning(s)
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {6E505C8F-2896-11DF-9B64-0013724DD917}
WARNING: OS requirements not met for {CFC9F871-7C40-40B6-BE4A-B98A5B309716}
WARNING: OS requirements not met for {E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6}
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: Payload {1D809D80-28A4-11DF-A816-0024E8692489} has an action "install" but no resultState
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - SiteCatalyst NetAverages: Install failed
ERROR: - Adobe Linguistics CS5 x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - Adobe Flash CS5_AdobeFlash11-en_USLanguagePack: Install failed
ERROR: - AdobePDFL x64 CS5: Install failed
ERROR: - Adobe Flash CS5_AdobeMobileExtension_Flash11-en_US: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - Adobe Player for Embedding: Install failed
ERROR: - AIR2 For Adobe Flash Pro: Failed due to Language Pack installation failure
ERROR: - Suite Shared Configuration CS5: Install failed
ERROR: - Photoshop Camera Raw: Install failed
ERROR: - AdobeColorCommonSetCMYK: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Camera Profiles Installer: Install failed
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - AdobeColorJA CS5: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - Adobe Flash CS5_AdobeMobileExtension_Flash11-mul: Install failed
ERROR: - Adobe BrowserLab CS Live: Install failed
ERROR: - Photoshop Camera Raw (64 bit): Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - CSXS Story Extension: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - PDF Settings CS5: Install failed
ERROR: - AdobeColorEU CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeColorCommonSetRGB: Install failed
ERROR: - Adobe Player for Embedding x64: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - AdobeOutputModule: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - AIR2 For Adobe Flash Pro_AIR2_Flash11-en_US: Install failed
ERROR: - AdobeCMaps x64 CS5: Install failed
ERROR: - AdobeTypeSupport x64 CS5: Install failed
ERROR: - DynamiclinkSupport: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5 x64: Install failed
ERROR: - AdobePDFL CS5: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Adobe SwitchBoard 2.0: Install failed
ERROR: - Adobe Flash CS5: Failed due to Language Pack installation failure
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - AdobeColorNA CS5: Install failed
ERROR: - Pixel Bender Toolkit: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: - Players For Adobe Flash Pro: Install failed
ERROR: - AdobeJRE: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - TLF For Adobe Flash Pro: Install failed
ERROR: - Adobe AIR: Install failed

May I know the Windows version you are using? If possible copy the latest installation log file from C: Program files\Common Files\Adobe\Installer folder.

Adobe flash cs5 getting error.

Hi,
I am facing the problem "Adobe Flash CS5 has stopped working "
Installation of CS5 is done. But when I open a flash file the above error occures.
Could you please help me?
windows 7p 32 bit

Uninstall Flash Player from you Aadd or Remove Programs panel, then install CS5.5
Mylenium

Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

CameraRoll MediaEvent.SELECT 1119 error in Flash CS5.5

Hi, I've been struggling with this for a few days and have searched everywhere for a solution but haven't been able to fix it. If anyone can give me any leads or suggestions to help fix this I will be eternaly grateful.
I have made a simple app in Flash CS5.5 and am publishing it with AIR for iOS. I am trying to get an image from the iPhone cameraRoll to load to a scrollPane on the stage using this code (I don't need to save the image anywhere, just display it on the stag). The scrollPane is called 'imageArea' and the button to initiate cameraRoll.browseForImage(); is called select_btn.
I've tried this both in the main timeline on frame 1 and also as a class of it's own, either way I get the same error:
1119: Access of possibly undefined property SELECT through a reference with static type Class
which points to this line:
mediaSource.addEventListener(MediaEvent.SELECT,imageSelected );
and
1119: Access of possibly undefined property data through a reference with static type Media event
which points to this line:
var imagePromise:MediaPromise = event.data;
Below is the code placed on the timeline, which I found online here http://forums.adobe.com/thread/891997?decorator=print&displayFullThread=true
[AS]
import flash.media.CameraRoll;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MediaEvent;
import flash.events.Event;
import flash.display.Loader;
import flash.display.Sprite;
import flash.events.IOErrorEvent;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
var mediaSource:CameraRoll = new CameraRoll();
select_btn.addEventListener(MouseEvent.CLICK, CameraStart);
function CameraStart(event:MouseEvent) : void
CameraRollTest();
function CameraRollTest()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
    if (CameraRoll.supportsBrowseForImage)
    log( "Browsing for image..." );
    mediaSource.addEventListener(MediaEvent.SELECT,imageSelected );
    mediaSource.addEventListener(Event.CANCEL, browseCanceled );
    mediaSource.browseForImage();
    } else {
    log( "Browsing in camera roll is not supported.");
var imageLoader:Loader;
function imageSelected( event:MediaEvent):void
log( "Image selected..." );
var imagePromise:MediaPromise = event.data;
imageLoader = new Loader();
    if (imagePromise.isAsync)
    log( "Asynchronous media promise." );
    imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, imageLoaded );
    imageLoader.contentLoaderInfo.addEventListener( IOErrorEvent.IO_ERROR, imageLoadFailed );
    imageLoader.loadFilePromise( imagePromise );
    } else {
    log( "Synchronous media promise." );
    imageLoader.loadFilePromise( imagePromise );
    imageArea.addChild( imageLoader );
function browseCanceled( event:Event ):void
log( "Image browse canceled." );
function imageLoaded( event:Event ):void
log( "Image loaded asynchronously." );
imageArea.addChild( imageLoader );
function imageLoadFailed( event:Event ):void
log( "Image load failed." );
function log( text:String ):void
trace( text );
[/AS]
My only idea is that I need to import the class for mediaEvent, but I already am. I'm completely stuck on this and any help would be really appreciated.

Moving the .fla file to a new folder removed this problem.

Error 16 after inatalling flash CS5

Similar Messages

Maybe you are looking for