Error 16 for both CS6 and CC Mac

Running OSX 10.8.4 mid 2009 Macbook 6 GB ram 256 GB SSD
CS6 for some odd reason fails to open with an error 16. I uninstall it and AAM does not list it so I can't reinstall
Download Bridge CC which does work, but Photoshop CC gives the same error and the same uninstall/reinstall error.
How do fix this and how do I get CS6 cloud version back?
And why does bridge CC tell me I don't have sufficient permissions when I use Help > Update?
I'd be glad to nuke and pave,but I need to know how.
Gene

Hi Mylenium
It's been a busy night trying and retrying your advice. I took a long break and I just got back off the phone with tech support.
Long story short: I tried the CS Cleaner tool, Installed and reinstalled numerous times. I even went into OSX's recovery mode and used time machine to restore the hard drive before the CC release. Then I called Adobe tech perhaps thinking they had some workaround.
My problems seem to have started with the AAM. It updated, and my Photoshop CS6 cloud went Error 16, and all further attempts at uninstalling and reinstalling Photoshop CC have given me nothing but error 16
A call to tech support did not fix it. I deleted the OSX hosts file, gone to Library/Application Support/Adobe,
renamed OODB folder to OODBold as per the tech's instructions and set permissions for Adobe PCD and SLStore folders. Error 16 back to square one despite carefully following instructions. The case has been elevated, I am awaiting Adobe Tech support's response.
Gene
At least CC works in Windows 7 and I have nothing mission critical so I can be patient with this.

Similar Messages

OSX - Update PS CC 2014 now error 16 for both cc and cc 2014

Updated just now to PS CC 2014, but now can't open either getting error 16?
Have reset folder folder permission as per adobe instructions
Configuration error 16 | CC, CS
Note when i open LR5 i get same error, but it does load!
need photoshop urgently?
thanks

I rebooted, then CC manager told i was signed into too many computers, even though i am only using it on desktop and laptop, and should it de-authorise the other computers.
I confirmed this, re-signed into CC and all is well now
Once PS CC 2014 is setup can i remove PS CC ?
thanks

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

External hard drive for both windows and mac

hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
thanks in advance for any insight.

2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
thanks.

Receiving error msg in user's mailbox for both Outbound and Inbound IDocs

Hi,
Whenever specific IDoc (Inbound/Outbound) gets failed then the user/org unit assigned in its partner profile should get those error messages in their inbox.
To achieve this for Inbound Idoc I have performed following set of steps:-
1. Created an object and attached it under IDOCAPPL using 'SWO1' and I have set that object type as 'To imported'.
2. I have assigned that object type to event 'ERRORINPUTOCCURRED' and standard tasks '00008068' (Inbound processing error), '00008074'
(Inbound Syntax error), '20000051' (IDoc Application Inbound error), '300000207' (Error during Inbound processing of SYSTAT01) using transaction 'SWETYPV'.
3. I have created an organisation unit with two positions and different jobs where each job has been assigned to specific tasks. User has also been assigned to specific jobs.
4. At the end of this I have assigned this org. unit to IDoc's partner profile.
But this process does not seem to be working we are not receiving any mail in agent's inbox. If someone has done similar kind of thing in past, please let me know the correct step for both Outbound and Inboud IDoc.
Thanks in advance.
Supriya

Hi,
Try this for inbound IDOC
Go to transaction WE42
Give the process code that you gave in the partner profile (WE20)
Select that row and press the details button (F2).
Next to the "Identification" field there will be push button which has the tool tip "ALE table"
Press that button
In the resulting screen..
In the IDOC section..
Give the following..
object type - "new business object that you created"
Start event - INPUTERROROCCURRED
End event - INPUTFINISHED
Hope this works..
Thanks,
Naren

Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

Error 16 on Launch of both CS6 and Arcobat XI

Getting Error 16 on Launch of both CS6 and Arcobat XI. I have checked and corrected permissions on both "SLStore" and "Adobe PCD" and still getting Error 16 on Launch.

Systerm info? Other details? Have you simply tried to reinstall?
Mylenium

Adobe won't validate serial numbers that I was given for Photoshop CS6 Extended on Mac.

Adobe won't validate serial numbers that I was given for Photoshop CS6 Extended on Mac. What should I do? Calling won't work as I am deaf and I could not find any solution on internet to this. I tried offline option and also reinstalling program but both of these would not still validate serial numbers that Adobe give me. Any ideas?

You can contact Adobe Support by online chat to help resolve serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

My PC crashed with both CS6 and Lightroom 4. .

My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro. Can I download the Mac versions of both programs and use my currenct serial numbers?

You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
Hal

Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                           
                         <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
           Or

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
But not both

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                    
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
...      Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
     <con:errorCode>BEA-386201</con:errorCode>
     <con:reason>
          A web service security fault
          occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
          to get token for tokenType:
          http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
     </con:reason>
     <con:details>
          <err:WebServiceSecurityFault
               xmlns:err="http://www.bea.com/wli/sb/errors">
               <err:faultcode
                    xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                    soapenv:Server
               </err:faultcode>
               <err:faultstring>
                    Failed to get token for tokenType:
                    http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
               </err:faultstring>
          </err:WebServiceSecurityFault>
     </con:details>
     <con:location>
          <con:path>response-pipeline</con:path>
     </con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
Sam

Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

BAPI for return/supplement the funds for both overall and fiscal year.

I have a development requirement for following and I am new to Investment ,management and Project
Systems functionality.
Your help will be appreciated
The new transaction will use the upload data to create returns and/or supplements to Marketing budgets. The following is what the transaction will do per request:
     Verify funds are available to shift. The program will do this by creating an error log for items that do not meet this criteria. The program will process all line items that have available funds (IM52).
Q pls let me know what BAPi/FM to use to verify whether funds are vailable or not
     Return the funds for both overall and fiscal year (IM52).
Q Pls tell me BAPI for same
     Supplement the funds for bother overall and fiscal year (IM52).
Q BAPI for same
     Deactivate the availability control for the WBSEs affected (CJBW).
Q How to do that and BAPI/FM for same
     Activate the availability control for the WBSEs affected (CJBV).
Q How to do that and BAPI/FM for same
     Add appropriate text from the data in the upload spreadsheet (this may be a concatenation of data from the columns in the upload) (IM52).
       Not clear what user is trying to say
     The transaction needs to be able to handle whole dollars as well as numbers that might include up to two decimals: e.g. .01 (IM52).

I am answering my own question since i completed the above development by using the FM KBPV_POST_DATA .
It will post to all the BP tables and is tested successfully.

Data Doubler - Format for both OSX and Windows 7 to read/write?

Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
Any thoughts? I appreciate it!

Use Winclone for the Windows partition and CCC for the OSX partition.

Creating InDesign files for both print and mobile output?

I am looking for a way to create files that can be multi-purpose for both print and mobile/online environments. I would like the output to be 2 different PDFs from one set of Indesign files. The problem I am encountering is that currently my files are full of hi-res and vector graphics, effects, and are generally created to be optimized for large-scale printings on offset or digital presses. I am trying to use the same files to generate files that are optimized for mobile and online presentation but finding that the number of vector graphics specifically is slowing page display down.
My initial reaction is that the solution would have to be dual-development. Multiple forms of 'master graphics' would have to be created and placed on multiple layers (one for print and one for mobile/online).
Hi-res files could be made lo-res in Acrobat or Pitstop, but vector imagery would have to be rasterized and I am not aware of a method to do that in either of those programs.
I have found some info on adobe.com leading me to think that maybe CS6 addresses some of this, but the majority of my work is being done in CS4 with only the bleeding edge being done in CS5.
Thanks in advance for any insight.

the output to be 2 different PDFs from one set of Indesign files.
You can accomplish this by saving each PDF using a different preset - High Quality Print for the high res, smallest file size for web
but vector imagery would have to be rasterized...
You should be trying to keep all vector work as vectors. This, in most cases, lowers the file size. There are a couple of exceptions to that like if the vectors are very complex (layered etc) and you are using bitmap effects like drop shadows. In general, rasterizing will increase the file size and lower the quality.
Is there any functional difference between the 2 PDFs? I am wondering why exporting using 2 different presets will not do the job efficiently enough. You could always save your linked images with a low res version - same file but make a copy 100dpi instead of 300dpi. This might help but InD normally downsamples the images anyway when exporting as smallest file size.
EDIT:// In Acrobat, you can save as "Reduced Size PDF" which strips out all the meta data etc and makes the PDF lighter and faster for web use. This would be a final, before publishing online step.

Loaded both CS6 and CS6 (64-bit) extended version...

I just loaded both CS6 and CS6 (64-bit) from disk (no download) onto my Windows 8 HP Envy computer.   I noticed both boxes were automatically checked by Adobe during the set-up. I left as-is to not cause problems thinking just one would load.   Both programs take 3.3 GB but that's not a problem for me.   I was surprised to see that I had a choice of TWO PS programs now on my computer.   I searched all over Adobe and can't find a similar problem.
Also, two versions of Bridge loaded; the regular and the 64-bit.
My question is this (applies to both CS6 and Bridge):   Do I need to remove one?   Why did both load?   If I should leave both, which one should I use?   Why does this happen?
My computer specs:
Windows 8
Memory:     10GB DDR3
System:     64 bit
Hard Drive:     1.5TB
Processor:     AMD Six-Core FX-6200
Thanks so much...Kathy

you should probably leave the 32 bit program.
there are certain plugins, printers, scanners and i-don't-know-what-else that won't work with the 64 bit program and will work with the 32bit program. unless you're certain you won't care about that, leave the 32 bit alone.

Error 16 for both CS6 and CC Mac

Similar Messages

Maybe you are looking for