"Error 16" solution doesn't solve problem, same error message pops up.  Further steps?

Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16.  Stumped!

Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid.  I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem.  Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking ŒCorrect¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]>  or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694>  For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

Similar Messages

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • TS1424 trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says  error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

    trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says  error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

    Contact Apple support for warranty service.

  • Error message popped up - problem reading disc on Satellite

    Wonder if anyone can help. Was doing virus scan on my home Satellite laptop (cannot remember model) 2 days ago when the screen went blue and there was a long error message basically saying the laptop had encountered a problem and was shutting down.
    After 2 hours the laptop still hadn't shut down so unplugged it from the mains and removed the battery.On trying to restart the computer, an error message popped up saying - problem reading disc CTRL+ALT+DEL to restart. When i did the command it appeared to be rebooting but then returned to the initial CTRL+ALT+DEL instruction.Tried it again and agan and can't get boot up.
    Anybody had this problem before?

    Hi again
    Well, it seems that you have really no experience in notebooks but it's not very fatal.
    Yes, the blue screen should be the BIOS but if you don't have any experience in BIOS so you shouldn't change anything.
    In you case I would recommend to contact the Toshiba service in your country because he can check what's wrong.
    There you will find the ASP:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  • [WHLK] The error message pops up while installing WHLK build 10022/10031 on Server 2012

    Hi all,
    There is no error message on WHLK build #9926.
    But the error message pops up on installing build 10022/10031.
    Did you get the same problem while installing WHLK build 10022/10031?
    Here is the s=installion step:
    Launch "HLKSetup.exe" on Server 2012 -->The kit will ask the user th find "HLKSetup.exe" in download folder-->
    Launch HLKSetup.exe" in download folder-->The error message pops up when the process bar goes to 38%
    Error message
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Microsoft.Windows.Kits.Hardware.Setup.UpdateControllerDb.exe
      Application Version: 10.0.10031.0
      Application Timestamp: 54f420f2
      Fault Module Name: KERNELBASE.dll
      Fault Module Version: 6.2.9200.16384
      Fault Module Timestamp: 5010ab2d
      Exception Code: e0434352
      Exception Offset: 00000000000189cc
      OS Version: 6.2.9200.2.0.0.400.8
      Locale ID: 1033
      Additional Information 1: d522
      Additional Information 2: d5228251694f130212c01ab1b52ad2a6
      Additional Information 3: f9b9
      Additional Information 4: f9b95021280f20538cd74ca111eba02c
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=190175
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    This is not the correct support channel for pre-release products, please follow-up with the channel in which you received this product for support or read the release notes for the product which will supply the correct steps to follow to avoid this situation.

  • I_STEP = 3; Error Message Pop up not coming on BEX

    Hi Gurus,
    i am having problem getting the ERROR MESSAGE POP UP on the BEX after validating the DATA user entered in the selection screen.
    Here is my scenario:
    user enter the values in the selction screen and i am validating those values in my varaible exit in I_STEP 3. When the user enters the incorrect values i am calling message class
    MESSAGE E000(ZBW).
    i am mainining the message class in SE91 and its all there.
    This is working fine when execute the query in RSRT and i get the error message in the botton scrool bar. when i am execute this in BEX, its getting dixconneced with the message
    Error Group
    RFC_ERROR_SYSTEM_FAILURE
    Message
    connection closed without message (CM_NO_DATA_RECEIVED).
    Please let me know if there is a solution for this. we are in BW 3.5 support pack 20.
    Thanks
    Krishna
    Edited by: krishna guttapalem on Apr 23, 2008 6:05 PM

    Hi,
    i have this opened this another thread too. search with the string "variable in selection screen" in business intelligence - business explorer. you can find the solution in that thread. i tried to post the link for that thread here but i am not able to do that.
    thanks
    krishna

  • Just installed itunes but when i try to open it this error message pops up: "apple application support required." I've tried uninstalling and reinstalling but nothing works

    Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works

    When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
    When you installed iTunes did you get any error messages?
    Anyway, on the face of it it may be worth trying a separate install of Apple application support.
    Uninstall iTunes again. Now open Apple Software update, assuming it is working.
    It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
    Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
    Before going on, can you get to this stage OK?
    One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures.

  • I own an eMac. I really enjoy burning my iTunes playlists to a cd. But, now an error message pops up just after iTunes prepares the disc for burning.The message states this: The attempt to burn a disc failed. An unknown error occurred (-3). Any advice?

    Hey everyone! So, here is my problem. I own an eMac. I enjoy burning my iTunes playlists to a CD. Well, all of a sudden, right after iTunes prepares the disc for burning an error message pops up and says this: The attempt to burn a disc failed. An unknown error occurred (-3). Any suggestions on how to correct this problen so I can continue burning my playlists???
    Thanks,
                   broshane

    Hi, I'e never heard of that error before!???
    Is this purchased music, or your own music files?

  • Error Message pop up "the operation could not be c...

    I just have my  5230 connect to the internet and I want to use the ovi store. The store was working good when I was browsing the store. Things went on as I accessed the a "Agreement" page (I don't really know how to called that page, it is a page with a "I agree" button), then I pressed that button. But once I pressed that button, the store loaded for a few seconds and a error Message pop up, it said "the operation could not be completed due to an error" and I was back to that "Agreement" page. When I click the "I agree" again, the error popped up again. Now I can't download any software.
    Also I always saw a error message about Java when I am using the nokia browser to access
    the internet. It is called "Java error log" or something. How can I deal with this problem?
    Please Help Me.
    Thanks.

    ed for me too. Strange that Nokia support didn't know usernames were now case sensitive. They had me doing all that hard reset stuff when it was that simple. Strange also that the web site is NOT case sensitive. A little consistency in Ovi store would make it a whole lot better. Am I the only one, for instance, who is chagrined by being asked to sign on when I want to download somethng and, once I've signed on I have to click on Download again? Grr

  • I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know wha

    I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know what the problem is and how to fix? Thanks.

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

  • Why is it when I try to download music an error message pops up and will not let me buy the music?

    Why is it when I try to download music an error message pops up and will not let me buy the music?

    Same happens to me......

  • An error message pops up saying cannot connect to itunes store then a white screen behind it says Your request produced an error [newNullReponse].

    When i try and access my app store and click on categories and top 25 an error message pops up saying cannot connect to itunes store then a white screen behind it says Your request produced an error [newNullReponse]. I have Tried resetting my iPhone  logging out and logging back into my apple account ive tried changing the dates but it doesnt work. I dont have a phone to call apple support so how do i fix this please help! Thank a lot !!

    Try this article: http://support.apple.com/kb/TS1368
    Also, if that doesn't work, try this:
    First you need to create another App Store iTunes account with a different country. (If you're American, do Canadian and vice versa)
    When you sign out then sign in under the new account, it will say that your account only works in USA and to change the store. Once it does that your top 25 will be changed back to top apps and you'll get no more errors. Then you can change back to your normal account.
    You can create another account free. Do it through iTunes on your computer or Mac. Change the country at the bottom of the App Store. Try and download a Free app. That way you don't need a credit card.

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Ipod touch 4th Generation(error message pops up when tryin to sync)

    an error message that says (0xE8000001) and the same thing happened when i didnt have the latest version of itunes and it has worked and all of a sudden i cant connect it and that error message pops up and i have the latest version of itunes. pleaseee help.

    Type "0xE8000001" into the search bar at the top of the screen next to "Support".

  • TS4002 When trying to access i message on my iPhone 4s an error message pops up; "Check your network connection or try again later" how can i fix this?

    When trying to access imessage on my iPhone 4s an error message pops up; "Check your network connection or try again later" how can i fix this? This became a problem after i updated the latest software update and i can't seem to fix it.

    Hi annmariefromuky,
    If you are having issues accessing iMessage, you may find the following article helpful:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Regards,
    - Brenden

Maybe you are looking for

  • Apple TV Mirror display issue

    I am currently using a 3rd Gen Apple TV with a late 2013 iMac. I can connect to AirPlay display and it automatically connects to "extended display" and the TV screen goes black however I get no options to use as a secondary display. When I click "Mir

  • Hi, Help me please with my T410 Bios..

    Hi.. ? It is possible to recover bios on T410 laptocs?. I have downloaded the bios from official site, T410, and flashed it on Windows 7 (lenovo software), it said that flash is succefully updated (bios updated) and needs to restart the computer, but

  • Sync issue with FCP DVCPro HD 720p 60 w/wire less mic

    I just tested with DVCPro HD 720p 60 w/wire less mic, the audio was drifted in FCP. Can some please explain the specific of frame rate of video and audio sync issues. Message was edited by: FCP-

  • 5.1 supported for iPod?

    Is there a way I can get 5.1 for my videos on my iPod? Like to make them 5.1 and what not. Or, when I plug my iPod into my Home Theater system, to get the full 5.1 advantage of DVDs I have on my iPod? Does this make sense?

  • General userexit before save of adrc-data

    Hi there! I need a common userexit to save additional data each time adrc-data is saved. This can be changed or new adress data if there's a new customer as well as there's a new built in equipment for example. Is there such an always valid userexit