Error 16 with Adobe XI Pro.

We're running Windows 8.1.  We bought Adobe XI Pro from the States and am running it in New Zealand.  Everytime we open a pdf file the error comes up.  We have re-installed Adobe several times and it'll be fine for a few days then the error will come back so we have done a fresh re-install of 8.1 and reloaded Adobe Pro.  We were fine for a month but the error has now come back.  We don't know what else we can do.  Can anyone please help!  Many thanks.

Hi Rave
Thanks very much for your response.  Below is a sequence of steps that we have taken to try and resolve this issue.
First step, we right clicked on the Adobe Acrobat XI desk top icon and ran as Administrator, then went to Help and ran the Repair Acrobat Installation.
Second step, we carried out the following.
Note: We have seen the link you provided below in a number of other threads and have read through it but as only Windows 8 is listed and not Windows 8.1, we’ve noticed there is a difference in Part 3 – ‘Set Permissions’ – where the dialogue boxes shown in the link don’t match Windows 8.1
So what we have done is worked through Part One – Set folder and search options and Part 2 – Modify the SLStore folder.
When it came to Part 3 (Set Permissions) we worked through Steps 1 and 2 and at Step 3 we clicked on ‘Advanced’. 
However at Step 4 and 5, Windows 8.1 is different and there is no ‘Owner’ tab in the ‘Advanced Security Settings for Adobe PCD’.  This was the stalling point for us, however what we did do is jump to Step 6, in the Permissions tab, selected ‘Change Permissions’ button and in  Step 7, selected Replace all Child Object Permissions with Inheritable Permissions from this Object, and then clicked on apply, and OK to close the dialogue boxes.
We did this yesterday and so far Error 16 hasn’t shown up.  So hopefully the above steps will fix the problem – we’ll probably know in a couple of days as mysteriously the error pops up after about a  week.
Regards
JollyCat
P.S.  Has anybody with Windows 8.1 come across the same scenario??

Similar Messages

  • Problem error with Adobe flash pro CS5 / Problème d'erreur avec Adobe flash pro CS5

    Hello !
    I use Adobe flash pro CS5 to edit a flash template for my website.(the free test version 30 days)
    Today, I want open Adobe flash pro CS5 when a error message appears : "adobe has stopped working".
    So, I can't open Adobe flash pro CS5, I've try 10 times, and I've again the same message.... I can't continue my website !
    Please, help me
    Thank, Jérôme. (sorry for the faults, I'm french...)
    Bonjour !
    J'utilise Adobe flash pro CS5 pour éditer un site web flash. (version gratuite 30 jours)
    Aujourd'hui, j'ouvre Adobe flash pro CS5 quand un message d'érreur apparait : "Adobe à céssé de fonctionner".
    Donc, je ne peux plus ouvrir Adobe flash pro CS5, j'ai déjà essayé 10 fois, et j'ai toujours le même message... Je ne peux plus continuer mon site !
    SVP, aidez moi
    Merci beaucoup, jérôme.

    No reply... Up
    Thank you !

  • Export multichannel mp4/h.264 with Adobe Premiere Pro CC

    Dear community,
    we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
    However, we are not succentful in exporting a multichannel mp4/H.264 clip.
    We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
    If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
    In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
    If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
    What are we doing wrong?
    Thanks for every suggestion.
    Thanks in advance
    André

    Thanks for your thoughts, Richard.
    Your are right, we currentky use the Adobe Premiere Creative Cloud version.
    We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
    After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
    However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
    This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
    Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
    How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
    André

  • I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

    I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

    Have you opened Acrobat and gone to Help>Updates to get an updated install?

  • XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

    Hi folks,
    I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
    The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
    I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
    Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
    Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
    1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
    Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
    2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
    In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
    The reason the producer suggested to deinterlace right away when using  an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
    3. What would be the best solution to tackle this issue (jagged lines) during editing?
    As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
    But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
    4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
    5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
    6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and  system specs as stated below:
    Since Adobe Premiere Pro CC has native support for  XDCAM HD is there any advantage of using an intermediate like ProRes at all?
    How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
    Thanks for your help!
    working with
    Adobe Premiere Pro CC and Adobe Media Encoder CC
    Apple MacBook Pro
    Intel Core  i7 Quad Core Prozessor
    2.3 GHz and 6MB L3 Cache
    16 GB RAM 1600MHz DDR3,
    256 GB SSD
    Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

    Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

  • Cannot get C7280 to scan with Adobe Acrobat Pro 8.0. Can you help?

    I know this may not be the right place to post this, but here goes. I'm using 10.5.2 along with Adobe Acrobat Pro 8.0, a HP C7280 AIO connected to network via wireless. The normal software I use is HP Scan Pro.
    Here's my problem. When I try to scan from Acrobat it will either open the scan pro software, show acrobat as the place to scan to in the bottom, but not do anything. If I "accept", it crashes Acrobat OR it will say it can't communicate, so either way it doesn't work. Any ideas how to make this work?
    Thx

    *"I know this may not be the right place to post this,"*
    Try the Adobe forums: http://www.adobeforums.com

  • Can't open pdf created with Adobe Acrobat Pro

    I can't open a pdf (that was created with Adobe Acrobat Pro) using Reader 11. However, the file will open with an older version of Reader (10.1.4) on another workstation. Is there any way to resolve the problem?

    Reader 11 is not available for general release. If you participated in the beta program, there is a place for this discussion which you have been provided. If you did not participate in the beta program, then you should not yet have access to Reader 11. I have just checked the Adobe website and it is not available to download from there.

  • ? How do I delete large blocks of empty space with Adobe Acrobat Pro?

    How do I delete large blocks of empty space with Adobe Acrobat Pro?

    How can you delete "empty space"? If you mean that you want to delete lines,
    like in Word, so that the text afterwards will go "up the page", then you're
    out of luck. You should do that in the original file, and then re-create the
    PDF.

  • Converting iMovie format to a format that I can edit with Adobe Premier Pro

    How can I convert iMovie format to a format that I can edit with Adobe Premier pro 7 program?

    Install the free flip4mac player and you'll be able to view it.

  • Edit pdf with Adobe Reader Pro XI?

    How do I edit a PDF file with Adobe Reader Pro XI?

    "How" very much depends on what exactly you want to achieve.  Basically you open it in Acrobat, then use the tools to edit it.  You may need to perform text recognition (OCR) if the document is a scanned image.
    If you need details how to do certain edits, you better ask in the Acrobat forum (Creating, Editing & Exporting PDFs).

  • Avid Unity with Adobe Premiere Pro CC and After Effects

    Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.

    Open System Preferences > Mouse and/or Trackpad.
    Adjust the speed.
    If that fails, try running the combo updater.
    OS X Mavericks 10.9.3 (Update (Combo)
    http://support.apple.com/kb/DL1746

  • "out of memeory" error with Adobe Reader x & IE8

    Hello,
    Getting an "out of memory" error with Adobe Reader X & IE8. This is a locked down bank environment so upgrading to a higher version of Adobe is out of the question.
    I looked around on the web and noticed that many people are experiencing this "out of memory error" but no fix has been provided.
    Can you help?

    Thanks for the reply and suggestion - unfortunately, I get this error when I open Adobe Reader X itself in addition to launching a pdf within IE9 (my OS is Win7x64 Ultimate).  I can launch Adobe Reader X, but when I open any kind of PDF file (local copy, remote, web, etc...) the error dialog box pops up.  Everything seems functional with Reader, it's just a frustrating (er, irritating!) thing!  I think after the weekend I will 'give up' and remove the Reader X and go back to my 'old' (but functioning!) Reader - thanks for the comment and suggestion tho!

  • Im a CC member , when i chose to download an app , i have error with adobe application manager pop up ?

    im a CC member , when i chose to download an app , i have error with adobe application manager pop up ?

    Abdulla Mohd what specific error message are you receiving?

  • My Mac with Adobe XI Pro is dead and I cannot access the machine.

    I had a Mac with Adobe XI pro installed but the Mac has now died and I have no access to the machine any longer. However, I have now bought and windows machine instead and installed Adobe XI pro on it by the product key does not work. Do I really have to buy the whole thing again, surely not? Thanks, 

    Certainly you cannot take a Windows license to Mac or a Mac license to Windows. However, Adobe have something called a "crossgrade". You cannot buy this in normal stores or web pages, you have to talk to customer service.

  • I couldn´t see imported videos with Adobe Premiere pro

    Hello:
    My name is Oren. I´m from Spain, and this is my problem.
    One month ago I bought a Toshiba Satellite 850-31M. It has an x64 processor, 16 GB of RAM and I have 2 hard drives, the c: an SSD of 500 GB and other of 1 Tb hardisk, configured as D:. It has a GeForce GT 630M graphics card with 2 GB of RAM. W8 operating system.
    I wanted to try the Adobe Premiere Pro CS6 and I downloaded the trial version. No problem, until I tried to import a video in the source window. Appears a small window that says "importing" and give to play in the source window and start .Audio be heard, but not the image. I've tried different video formats and always the same. The same video are seamlessly Quick Time and other video viewers ..... I do not know what to do, I think I've tried everything, even restart the computer to its factory settings and install Adobe Premiere vacuum and the problem remains. I tested with a trial of Premiere CS5.5 and got it. You hear the audio but no video . Insert the video in the timeline and recognizes it as such, even the first frame, but said, is not seeing in the "source", nor in the preview, only the audio.
    What could it be? Am I you could lend a hand I'm desperate?
    thank you very much

    Hello:
    I have the vídeos in a hard-disk. I'd tried in different video formats and
    always the same. I hear the audio but I couldn't see the video image.
    El jueves, 25 de abril de 2013, Jim Simon escribió:
       Re: I couldn´t see imported videos with Adobe Premiere pro  created by Jim
    Simon <http://forums.adobe.com/people/JSS1138> in Premiere Pro - View
    the full discussion <http://forums.adobe.com/message/5265806#5265806

  • FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

    FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
    Any solution * Advance Thanks

    FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
    You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

Maybe you are looking for

  • Getting Final Cut Express movie (burned using idvd) to play in Windows

    I have made my Final Express movie into a dvd using idvd. However, it will not play on Windows media player, even though it plays on a regular dvd player. I am not certain why, but is there a way I can make it compatible? I have tried even burning it

  • Oracle Synonym is not available in IDT 4.1

    Hello Friends, I am working on a universe using IDT 4.1. I have created a db connection (based on Oracle 11g -> Oracle Client driver) and have used SSO authentication which is working fine. I see the list of tables and views under a schema but public

  • [b]How to convert a Socket object in a C socket file descriptor[/b]

    Hi all, I need to make a getsockopt() call using JNI, but I don't know how to convert a Java Socket object in the integer corresponding to the socket file descriptor. Thank you in advance! Fernando

  • Error in SAPinst installing Solution Manager

    SAP Solution Manager 4 Support Release 4 OS: UNIX 11.23 DB: Oracle 10g Hi,     The SAPinst show me this error in the step: Configure Adobe Document Services when I trying to install the Solution Manager: ERROR      2010-01-14 10:20:50.804           

  • User Groups Don't Match

    I noticed today that when I am logged into my system as me "carlos", I get a different response between the following two commands: [carlos@tuna ~]$ groups audio users and [carlos@tuna ~]$ groups carlos audio optical users Aren't they the same thing?