Error 1601 appears when I restored, I did uninstall all my security software and it still doesnt work

please help me

Hello cyliss69, try a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you.

Similar Messages

  • HT201210 every time i try to update my iPhone to IOS 7 it wont because of "Unknown error (3199) Any1 have any ideas? i have done that Drivers thing and it still doesnt work

    every time i try to update my iPhone to IOS 7 it wont because of "Unknown error (3199) Any1 have any ideas? i have done that Drivers thing and it still doesnt work

    Ios has not been released.  It is available in test version only to registered developers.
    If you are a developer then you nkow better thatn to post this here.  You should use your credentials to log into the developers forum.
    If you are not a developer then you are illegally downloading the software.

  • When i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt !

    when i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt ! any help please

    What was the exact error message you received?  When you removed and re-installed iTunes, did you use the precise instructions in this Apple support document to walk you through the process?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    Do you experience the same issue on other WiFi networks?
    Do any other iOS devices experience the same issue on your network?
    Make sure you follow all steps provided in the article below:
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT4367 i restored my apple tv 3 and it still doesnt work

    I restored my apple TV3 with itunes and says it was restored successfully, but it still doesnt work.

    Welcome to the Apple Community.
    What exactly doesn't work.

  • People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

    I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

    When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware.  Two things to investigate would be the software/firmware on the backup and issues with the cellular network.  It's probably safe to rule out the cellular network as well.
    First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device.  Do this thorough itunes, and the applications (photographic and document processing) on your computer.  Perform a firmware update then restore the device as new.  If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
    Read each of the steps before initiating the DFU.
    !.  Connect the iPhone to any computer running a fully updated version of iTunes.
    2. Press and hold both "home" and "sleep/wake" buttons
    3. After eight seconds let go of only the sleep/wake button.
    4. Keep holding the home button until you see a popup mesage in iTunes.
    5. Read all all the popups, then use iTunes to update the iPhone's software.
    If the popup fails to show, repeat steps 2 through 4

  • TS2570 I am getting runtime error R6034 when opening iTunes i have followed all instructions on reinstalling and it still occars

    I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99537)

  • My iPhone 3GS is currently on what they call... The "white screen of death" ive restored, updated my iPhone and it still doesnt work please help!!

    PLease help!

    Did you ever got this resolve?  I have your same problem phone type and all.

  • HT201413 itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to  8.1.2

    itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to  8.1.2.

    Hi Myo Ko Ko Aung,
    When iTunes reports this error during the restoration of an iOS device, it typically indicates a conflict with security software.
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Sincerely,
    Allen

  • What should I do about an odd icon on the desktop that appeared when I restored my iPhone?

    I have an odd icon on the desktop that appeared when I restored the software in my iPhone, and I do not know what to do about the strange file.  The scenario is as follows:
    Recently I was having some problems with the proximity sensor on the iPhone, and I read that if one restored the software on the iPhone, this often allowed the sensor to be calibrated and it would work properly.  Thus I synchronized (backed up) the iPhone and then wiped it out and reinstalled the software.  At the point iTunes asked me did I want to restore the phone from a backup, I decided that since I did not to re-import any corrupted stuff from the old installation that might affect the operation of the proximity sensor, then I would start over and just set it up as a new phone.  I was able to get what little I wanted of stuff otherwise from the iCloud and my music from iTunes, so everything seems to have gone fine. 
    However, now I have a file that has an image of a Lego-block with musical notes and an iPod on its sides that appeared on the desktop.  The odd file is called "iPhone3,1_5.0_9A334_Restore.ipsw".  What on earth is this all about????  When I search the internet, I see people who have jailbroken their iPhones talking about .ipsw files, but to the best of my knowledge, I have not done anything to jailbreak my iPhone, nor would I ever want to do such.  Why did this file appear on my desktop? What is this file for for?  Can I delete this file?
    Thank you.

    I forgot to mention also that when I tried to delete this icon, the trash eternally acted like it was emptyint the trash, but the progress bar was not progressing.  I suppose that is because the file size is too large (812 MB).

  • Why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

    After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
    I have had this problem before and had to reinstall an earlier version of firefox.
    The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
    Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • Error message appears when trying to start server in VM Manager

    Error message appears when trying to start server in VM Manager
    OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
    When trying to restart server:
    OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • "Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

    "Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
    I am absolutely pulling out my hair over this one!!
    PC/Win 7 64bit/Adobe XI/Office 2010
    I have tried Uninstalling and re-installing
    I have tried using an adobe software removal tool
    I have tried modifying the security settings in reader
    I've tried running repair on MS Office
    If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
    If you drag and drop the .pdf onto the desktop, and then open it, it opens.
    If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
    ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
    Hypothesis: Outlook 2010 does not like to open Adobe Reader.
    SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
    PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

    I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

Maybe you are looking for

  • How do you add/make properties to layers/timeline without shortcuts?

    How do you add scale, position etc to a layer on the timeline without using shortcut keys? I used the tools to scale and whatnot, and know you can use shortcuts but is there a menu where you can add those properties and make them show up in the timel

  • How Multiple Video Cards Work?

    Let's say I buy a MacPro with 2 video cards and I name the outputs 1 through 4. I want outputs 3 and 4 to mirror output 2, but I don't want to have to run output 2 at the same resolution as outputs 3 and 4. Is this possible? From output 1 I want to o

  • Layout and Colors etc.

    Hi I wonder how the layout of a map is defined with Oracle Spatial. How is it descided that lakes are blue and roads are black etc? Mapinfo uses sometingh called Map Definition File (.mdf). Can it be used with Map Extreme or is it any similar way to

  • Maker Cost center G/L a display field in PO/PR

    Dear Experts , When i procure a material in PO/PR against an account assignment K- Cost center , the G/L account is defaluted from the material master / service master setting , BUT it is in editable mode . I want to make this G/L in display mode to

  • Not enough memory to complete this operation windows 8

    Hi All, I have a problem whith a built executable where at random intervals I get a windows dialogue saying "Not enough Memory to complete this operation" I have searched through the forums and although there are similar posts I have not been able to