Error 1602 cant get into dfu nothing on screen

im on windows 7 64bit with my ipod touch 32g 3g and i cant get it into dfu mode Ive tried at least 20 times... my ipod is blank and i really need it fixed please help. i got the error when i tried to restore to 3.1.2 from 3.1.1 and im not sure if it downloaded from apple right.. help

How to: Force your iDevice into recovery mode.
1. Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
2. Plug the device's USB cable into your computer only.
3. Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
4. iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." 
5. Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.

Similar Messages

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

HT4623 i cant get into my phone to update it just keeps telling me to plug into itunes and as soon as i take it off charge to plug it into itunes the phone switches off do you know how to get around this?

i cant get into my iphone to update it when on charge it tells me to plug in to itunes and when i take it off the charge to plug it into itunes the screen goes blank and when i plug it into the pc the apple symbol will come up for a few seconds then the screen goes blank and it keeps doing that anyone know what the problem is??

Try placing the device in DFU mode (google it).
If it will not enter DFU mode, take the device to Apple for evaluation and possible replacement.

Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (name_of_volume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: ***** FILE SYSTEM WAS MODIFIED *****   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

Cant get into the administrator

After a clean install of W2003 with SQL2005 Express and
CF7.02 with no errors. I get an error message "The page cannot be
displayed" when trying to open the Adminstrator for the first time.
I cant get into the Web Srv Cnfg Tool either.
here is where my adminstrator page points to. Sorry, I am
extremely new to all of this CF and IIS
http://127.0.0.1/CFIDE/administrator/index.cfm
After turning off the Friendly Http message filter this is
what gets displayed.
%1 is not a valid Win32 application

You could try the process noted in this older thread
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=143&threadid=1160221
but I actually had no luck with it, so I resolved it by
simply installing a 32 bit version of Win2003/IIS6 on the 64 bit
hardware. I didn't have the luxury of time to keep playing with the
64 bit OS.
when the next version of CF comes out, it will hopefully
address both Vista and 64 bit and at that time I will consider
re-installing the 64 bit OS/IIS to take advantage of the superior
architecture and processing power.
you could try a search of Microsoft.com and see if they have
anything new suggested in relation to 32 bit extensions on a 64 bit
system, or even try Tek-tips.com for a similar search and inquiry
in the IIS forums.
Some day I may try it again, but at this time I will stick
with the 32 bit OS/IIS combo on the 64 bit HW

I cant get into my iphone it locked me out

help me i cant get into my iphone i enterd the password in to meny times.....

You will need to restore from backup from the computer to which you last synched, If you still can't get in, you will need to put your computer in DFU Mode (search this forum for how to do that) and restore as a new device.

My ipod 5 is disabled and now i cant get into it

my ipod touch is disabled and i cant get into itnplease help

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

Unknown Processor Revison & Cant get into bios! RS482M4

Similair to problem to another post but have tried what was suggested.
This is my first attempt at an AMD system and I've hit a dead end on the first switch on...
AMD Athlon 64 3700+
MSI RS482M4 Motherboard
1GB RAM
WD 1600AB H/Drive
Sony CD-RW
When I power on I get the bios screen with the M/B details (RS482M4 A7019AMS V1.1) and processor details (AMD Athlon 64 Processor 3700+DRAM Clocking = 400 MHz).
It then goes a little further, initialises USB drivers, mememore HD and CDRom then states:
CMOS Settings Wrong
CMOS Date/Time Not Set
****Warning: Unknown Processor Revision ****
The processor installed on your system is of an unknown revision. Please contact your BIOS vendor for appropriate upadates.
Fatal Error ... System Halted.
I have tried resettng the CMOS but as I cant get into the BIOS I cant update it and feel like I've been going round in circles for the last 5 hours!
Any ideas?

Bios version is V1.1 and PC doesnt boot to anything - doesnt get beyond saying 'Unknown Processor Revision' to even allow you into the bios to try updating it.
I have also tried asking on the MSI online support but as yet with no reply. Its really annoying me as the motherboard has all the things I need and don't want to have to go and buy another one (have tried the CPU & memory in another machine and all worked fine).

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available what do I do

I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available what do I do

Hi, Jennifer.
Thank you for visiting Apple Support Communities.
I understand that VoiceOver has been activated and you are unable to access your device. I have done this myself and here are the steps to disable this feature.
VoiceOver
Press the home button three times quickly (formerly "Triple-click home").
Accessibility Shortcut
Managing Accessibility features using iTunes
Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
In iTunes, select your device.
From the Summary pane, click > Configure Universal Access in the Options section at the bottom.
Select the feature you would like to use and click OK.
Use Accessibility features in iOS
-Jason H.

My screen on my phone is in a disabled mode and i cant get into my phone. i need to find out how i wipe my phone clean and start over

my phone is in a diabled mode and it cant get into my phone anymore. i need to clear my phone off threw itunes but cant seem to figure it out

http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

I cant get into my ipod, it keeps saying connect to itunes, but it cant unlock my phone. Please help..

I cant get into my Ipod. It keeps saing "connect to Itunes" Please help..

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Cant get into my messages - please help

Hello
I cant get into my messages. I press on messaging and the screen looks like it will go through but then it just returns to my main screen again. My handset is also not receiving texts my friends send me! yet i can bluetooth pics to my handset off other phones - but then it wont let me into the inbox to open them. I have put my sim in another handset and it works fine.
What are my options? if I reset will I lose all the saved picture messages in the sub-folder i have set up in the inbox? Is there anyway I can get to these and save them! please help

My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
Used nokia pc suite to back everything up off the phone.
We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
We then entered *#7370# to reformat the phone, and messages were than accessible.
As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
Hope that helps.

How can i get the ipad to work because my little brother put a password on it and it now is blocked and cant get into it ???

how can i get my ipad to work because ,y little brother put a password and cant get into it ???

You must restore the iPad with iTunes.

The computer with my original itunes account and all my music crashed and i cant get into it at all. how do i get my old music onto my new computer?

The computer I started my itunes account on crashed. I would like to put all my old music onto my new computer but I cant get into the old computer to import. Is there anyway to get my old music another way?

Welcome to the Apple Community.
Pis your content purchased, do you have a back up.

Error 1602 cant get into dfu nothing on screen

Similar Messages

Maybe you are looking for