Error 1602 when updating to 1.1.3

What do I do if I get the error code 1602 when I am trying to update to 1.1.3 in order to get January Downlaod?

Hello and Welcome to Apple Discussions.
Did you fully remove iTunes and the Apple Mobile Device Support as per the instructions above. A simply re-install may not replace all the components required.
mrtotes

Similar Messages

Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

Error 1602 when updating to 1.1.3 - please help!

Hey all,
i would really appreciate your help.
I am wanting to download the january update. So far i installed itunes 7.6 and downloaded the 1.1.3 update without any problems. I seem to be having difficulty installing the 1.1.3 update onto my ipod as it just says something along the lines of couldnt update ipod error 1602. Ive had a bit of a search on this discussion board and realise ppl have been posting a few strange ways to overcome this, with varyingly successful results. Primarily they involve removing all itunes programs and/or restoring ipod. Is this what i should do?? If i am to do this does this mean that i loose all of the content on my ipod?? will i loose all of my songs in itunes? or will everything be exactley the same??
Thanks in advance
sally

Hello and Welcome to Apple Discussions.
Did you fully remove iTunes and the Apple Mobile Device Support as per the instructions above. A simply re-install may not replace all the components required.
mrtotes

Error 1602 when updating 1.1.3

I just finished following the instructions Apple has for error 1602, trashed itunes, applemobile sync and reinstalled itunes 7.6. Followed the instructions to the tee. Went to update the iphone to 1.1.3 and got the same error. Any ideas?

I tried updating to V1.1.3 tonight and got a 1602 error message on both of my iphones. I called tech support and waited about a half hour. I talked to Apple Tech rep and was up and running in about a half hour or less. Thank you Apple tech support... Both phones running great with new update installed.
1 Happy Camper... Thank You Apple Tech Support!!

Error 1602 when updating to IOS4 and then not recognizing in Itunes

Started the update process this morning to update my Iphone 3G to IOS4, after about 2 hours it came up with the error "The Iphone could not be restored, an unknown error occured (1602)" after this the phone was stuck on the screen with connect to itunes therefore i was unable to use the phone. Tried connecting it to Itunes but it would not recognise the Iphone, tried everything from uninstalling Itunes and changing the drivers. Installed Itunes on a different PC and it recognised the IPHONE and updated it to IOS4. However by doing this on another PC it has now lost all my contacts, messages, apps, and music.grrrr...Only trouble is i still cannot connect it to the other PC. Both Pc's are running Windows 7 32bit. any help would be much appreciated.

Anybody out there that is pulling their hair out of the issue with Itunes not recognising the phone, go to Device Manager click on Portable Devices, Right Click on Apple Iphone, click on Update Driver, make sure you select Update Automatically, and then it will install the Apple Mobile Device USB Driver (Please Note this will be displayed in the Universal Serial Bus controllers section). Should then display in itunes, if not restart itunes. Where i was going wrong was i was telling the system to search in the apple drivers folder in C:\Program Files\Common Files, and these would not install due to a conflict with the Windows Picture Drivers. Hope this Helps

Still getting ERROR 1602 when updating.. I've tried everything... HELP!

I have tried the following, and no luck.
- Uninstalling iTunes and Apple Mobile Device, then reinstalling them after reboot.
- Plugging into different USB ports, and blowing dust out of them.
- Rebooting iPhone multiple times.
- Clicking "Restore" instead of "Update". Still get error message.
- Erasing the patch file and re-downloading it.
The only thing I haven't done is call customer support because I hate dealing with stuff like this over the phone. Are there any other options, or should I plan on making a trip to an Apple store?
Thanks for any help guys and sorry about another thread relating to this. I'm just extremely frustrated...

There is some help here:
http://discussions.apple.com/thread.jspa?threadID=1343034&tstart=0

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Did you get error 1067 when updating Reader?

If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
What OS are you using and what version (such as Window XP SP2)?
What version of Reader do you have?
What was the error message you got?
How much disk space do you have available?
How much memory (RAM) is on your system?
I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
Please let me know if this helps. We haven't been able to reproduce this error.
Thanks so much!

I just worked through this error on my Dad's computer. He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it. I manually un-installed Acrobat 4, but left the shared files in web/common alone. I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it. It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open. I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
This machine has 1 gig of RAM and approx 4G of free disk space on C:.

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
Exact error below:
error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
Thanks in advance!

My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

Error 4 when updating the text data

When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

hi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

HT1766 error 8000067 when updating version 5.1 on ipad1..what to do?

Error 8000067 when updating version 5.1 on Ipad. please help to avaoid to loose everything. thanks and regards

iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types. You do not have enough access privileges for this operation." How to fix?

After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
J

Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

Hi there MRDLS,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

[SOLVED] Strange error message when updating Pacman

I get a following error message when updating pacman and doing system upgrades:
[mike@goat ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
I tried running pacman -Syyu, but that did not seem to solve the problem. There is /var/lib/pacman/local/openssl-0.9.8l-1/
directory but it is empty. When running pacman -S openssl, I get the above error message as well but it spans for hundreds of buffer lines. In the end I end up with this:
openssl: /usr/share/man/man3/ssl.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui_compat.3.gz exists in filesystem
openssl: /usr/share/man/man3/x509.3.gz exists in filesystem
openssl: /usr/share/man/man5/config.5.gz exists in filesystem
openssl: /usr/share/man/man5/x509v3_config.5.gz exists in filesystem
openssl: /usr/share/man/man7/des_modes.7.gz exists in filesystem
Errors occurred, no packages were upgraded.
[mike@goat ~]$
Anybody have any insight?
Thanks,
maschinetheist
Last edited by maschinetheist (2010-03-02 17:18:42)

Bregol wrote:
Sounds to me like openssl is installed on your system but the info on it is now missing from the local pacman database (/var/lib/pacman/local). In other words, pacman forgot that you installed it. So in your second clip of code, pacman is complaining that files belonging to openssl exist in your filesystem, since you do have it installed but it no longer knows that.
Don't know if this is the proper way to fix it, but I imagine forcing a reinstall of openssl (pacman -Sf openssl) should get pacman to reinstall openssl so that it knows it is installed.
Bregol,
pacman -Sf openssl
seemed to have fixed it. Did not know of the force reinstall option. The necessary directories in /var/lib/pacman/local/openssl have been created.
Thanks,

Error 1602 when updating to 1.1.3

Similar Messages

Maybe you are looking for