Error 1602 when updating to IOS4 and then not recognizing in Itunes

Started the update process this morning to update my Iphone 3G to IOS4, after about 2 hours it came up with the error "The Iphone could not be restored, an unknown error occured (1602)" after this the phone was stuck on the screen with connect to itunes therefore i was unable to use the phone. Tried connecting it to Itunes but it would not recognise the Iphone, tried everything from uninstalling Itunes and changing the drivers. Installed Itunes on a different PC and it recognised the IPHONE and updated it to IOS4. However by doing this on another PC it has now lost all my contacts, messages, apps, and music.grrrr...Only trouble is i still cannot connect it to the other PC. Both Pc's are running Windows 7 32bit. any help would be much appreciated.

Anybody out there that is pulling their hair out of the issue with Itunes not recognising the phone, go to Device Manager click on Portable Devices, Right Click on Apple Iphone, click on Update Driver, make sure you select Update Automatically, and then it will install the Apple Mobile Device USB Driver (Please Note this will be displayed in the Universal Serial Bus controllers section). Should then display in itunes, if not restart itunes. Where i was going wrong was i was telling the system to search in the apple drivers folder in C:\Program Files\Common Files, and these would not install due to a conflict with the Windows Picture Drivers. Hope this Helps

Similar Messages

  • Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

    Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

    It seems that the itunes program has some interfefence when contacting the apple server.
    i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
    Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
    ha presto it began the process of transfering the file to the iphone4 and has now fully updated
    hope that helps
    leon

  • HT1414 i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • 2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    Thanks, but I've checked those articles out already. I drained the battery and finally got the needs charge (battery w/red line + arrow pointing to a charging bolt), I plugged the USB into the laptop and held down the start key +home key until I saw the apple logo. However, it still was not recognized by itunes. It's been plugged in for over an hour now and the screen is cycling apple logo/low battery (battery w/red line)/and black screen.

  • TS1425 I have the updated version of iTunes and a brand new iPod Nano 3rd Gen. It will not sync and is not recognized by iTunes.  What's wrong

    Just received new iPod Nano 3rd Generation 4GB today. Have new notebook computer for 3 months with latest version of iTunes.  New iPod Nano is not recognized by iTunes and cannot do a darn thing with it.  All I want is my music.  What is the problem and how do I fix it?

    Start by working through all of the troubleshooting suggestions here.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod shuffle will not charge and is not recognized by itunes or computer

    HELP, My G2 ipod shuffle will not charge and is not recognized at all by my computer or itunes. it is like there is nothing even pligged in to the usb port. and when i plug in my ipod to the charger my ipod blinks orange 4 times and then stops whats going on?

    Is your phone itself working OK?

  • IPod Touch and iPad Not Recognized by iTunes

    When I plug in my iPod Touch and iPad, iTunes does not open, but both devices are recognized by Windows 7. When I open iTunes manually, there is no listing for "Device" at all. I have uninstalled and reinstalled the latest iTunes version several times to no avail. I'd appreciate any advice on what I can do to solve this problem.

    Have your tied the troubleshooting here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Help my pc recognizes my ipod touch as a camera device and is not recognized by itunes

    When I conect my ipod to my pc it's recognized as a camera device, and when itunes pops up there's just a blank screen with the ipod logo and It can't be sincronized, I've resetted my ipod, i've allready unninstal and installed itunes 10.6 and it makes no difference, please help =(

    Start here:
    iOS: Device not recognized in iTunes for Windows

  • My iPod doesn't play songs, and is not recognized by iTunes

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    P.C   Windows XP  

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
    If there is anyone out there that can help please do!
      Windows XP  

  • IPod and iPhone not recognized by iTunes nor Windows

    After working fine for a long time, suddenly both my iPod Classic and my iPhone are not recognized by iTunes nor Windows.
    I have tryed EVERY single troubleshooting recommended by Apple Support
    Can anyone give me new ideas? I really need to sync!
    Thank you...

    Hi,
    Have you seen this link...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    http://www.apple.com/support/itunes/devices/

  • My iPad will not charge in wall outlet and is not recognized by iTunes

    Hello, recently my ipad stopped charging with the wall outlet and it is not recognized by itunes. I have ipad 1

    Pick the appropriate one of these for advice:
    Windows - http://support.apple.com/kb/ts1538
    Mac - http://support.apple.com/kb/ts1591

  • Error 1602 when updating to 1.1.3

    What do I do if I get the error code 1602 when I am trying to update to 1.1.3 in order to get January Downlaod?

    Hello and Welcome to Apple Discussions. 
    Did you fully remove iTunes and the Apple Mobile Device Support as per the instructions above. A simply re-install may not replace all the components required.
    mrtotes

  • Error 9 when updating to iOS4

    The past couple of days whenever I went to go connect my iPod to my PC, iTunes has been telling me that an update is available for my iPod Touch. Since I had the morning off, I figured I'd finally update. When the update was done, I got a screen on my iPod with the iTunes logo and a white USB chord below it, and iTunes told me I had to recover my iPod before using it with iTunes. So I did.
    However, when I tried to restore my iPod, it told me there was a problem with restoring it or something, and gave me the error code 9.
    Anyone know how to fix this? I've tried looking on Youtube and Google, tried holding down the lock button and home button for ten seconds, then just the home button, didn't do a thing for me.

    Welcome to the forum.
    From [this article|http://support.apple.com/kb/TS1275]:
    Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by [eliminating conflicts from third-party security software|http://support.apple.com/kb/TS3125].
    Hope that solves your problem.

  • Still getting ERROR 1602 when updating.. I've tried everything... HELP!

    I have tried the following, and no luck.
    - Uninstalling iTunes and Apple Mobile Device, then reinstalling them after reboot.
    - Plugging into different USB ports, and blowing dust out of them.
    - Rebooting iPhone multiple times.
    - Clicking "Restore" instead of "Update". Still get error message.
    - Erasing the patch file and re-downloading it.
    The only thing I haven't done is call customer support because I hate dealing with stuff like this over the phone. Are there any other options, or should I plan on making a trip to an Apple store?
    Thanks for any help guys and sorry about another thread relating to this. I'm just extremely frustrated...

    There is some help here:
    http://discussions.apple.com/thread.jspa?threadID=1343034&tstart=0

Maybe you are looking for

  • Problems with animated gifs in Premiere Pro

    Hi everyone, I need some help with my video project - I made some animated gifs that I want to add to the end credits. Importing them etc. works just fine, but in the video, the images always show up with a white background (white "box" around the an

  • Can I reselect an external hard drive for backup after selecting another?

    Hello, I attached the hard drive I am using for my time machine backups to my new airport extreme in order to have the other partition on the disk available over my home network. Time machine didn't recognize it immediately as the same disk, so I nav

  • Is it possible to lock out a specific cookie in Safari

    Is it possible to permanantly "lock out" a specific cookie in Safari? I understand using preferences to provide details and to remove specific cookies but I would like to prevent some cookies from ever being allowed. Is there an advanced blocking met

  • PROBLEM WITH RFC DESTINATION

    Hi GURU, I have a problem with the record of RFC destination. When i created RFC destination TCP/IP when i made the tests, it`s ok. But when i used this rfc destination in a  function of ABAP. I have an error. The error is: RfcExecProgram'#Win32 erro

  • Audit ACL on Large File Share

    I have to audit the permissions of all folders on a large drive, and I was wondering if the following code is really practical with this many possible folders. $ntfsreport = @() $folders = Get-ChildItem \\serverA\F$ -recurse | where {$_.psIsContainer