Error 1604 when upgrading to 4.2 HELP!!!!!!!!

Its now 7:30 pm eastern time. When I tryed to upgrade Ipod was at 1:30. Still getting the same error message. I switched ports till I am blue in the face. Now I am trying to at least get 4.1 back on by restoring by ipsw files and still not working. This happends everytime I upgrade!!!!!! BTW I am on a xp machine. HELP!!!
Message was edited by: johntom2000

Do you have iTunes 10.1 on your PC? You need 10.1 in order to install iOS 4.2.1 on your Touch. If you already have 10.1 then maybe temporarily disable any firewall and/or anti-virus software on your computer.

Similar Messages

  • Error 1604 when updating to 2.0 Help!!

    So last night I got really excited and remembered that the 2.0 update was supposed to come out. So like everyone else in the world (which I didn't realize this at the time), I started to update. Everything was going fine...until I got some error in the process. It told me that I must restore my iphone. I have tried atleast 10 times between last night and today. I keep getting this 1604 error, and I can't use my phone at all. When it's turned on, it shows that I need to plug in a USB and open iTunes. Does anyone have any insight on what I should do, or has anyone experienced the same problem? It would be greatly appreciated!

    People who have still not solved error 1604 and had a bricked iPhone no matter what they tried, might manage to revive it by following these instructions (on how to downgrade from 2.0 to 1.1.4).
    You will need the following:
    - iTunes 7.5 (NOT 7.7)
    - iPhone firmware iPhone1,11.1.4_4A102Restore.ipsw
    Step 1:
    Uninstall iTunes 7.7 completely if you have it and restart your computer.
    Step 2:
    Install iTunes 7.5
    Step 3:
    Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.
    Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for about 9 seconds.
    Why 9s? Well people say 10s, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.
    When you hit about 6-7s the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead.
    Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.
    If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.
    Step 4:
    Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.
    Fingers crossed it should restore back to 1.1.4.

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
    [10:36:30.0542]       Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.

    I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch.  I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail.  Any help is greatly appreciated.

    msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
    =========
    I've attached a couple of threads from the Apple support
    forums, it appears this is an ongoing problem for many folks trying to
    download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
    check them out;
    1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
    https://discussions.apple.com/thread/3373167?start=0&tstart=0#
    2) How do I upgrade first generation touch software to 3.1.3
    https://discussions.apple.com/thread/3009667?start=0&tstart=0
    ==========
    Good luck...
    Message was edited by: SpanishClash

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • I keep getting error 2324 when upgrading to version 10

    I keep error 2324 when upgrading to version 10. Running win 7

    Try disabling anti-virus also. You can also download the updates (not upgrade that is AA XI) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. With the downloads, you typically have to install them in order. Only reboot after the last install.

  • Error 51 when upgrading iphone 6 to ios 8.1.3.

    looks like the serial number is lost when preparing the phone for the update. can't be verified by apple servers. tried to restore. nothing; still not recognized. tried dfu, same result. basically, i have a large, expensive brick

    getting error 51 when upgrading iphone 6 to ios 8.1.3. sorry, i repeated myself

  • How to fix error (-1) when upgrading iPad2 to iOS 6?

    hi all,
    how to fix error (-1) when upgrading iPad2 to iOS 6?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Itunes unknown error 3194 when upgrading to latest iOS

    I've been trying to upgrade my iPhone 3GS to 4.3.2, from 4.3.1 iTunes keeps reporting an unknown error 3194, when verifying the downloaded update. I don't know what is causing this.
    I have:
    - Rebooted my PC (Windows 7)
    - Rebooted iPhone
    - deleted the update and redownloaded
    None of these have solved the issue. Any ideas?

    Hi pablo2001jedi,
    The following link highlights the error code as being an issue with the connection to the Apple Server: http://support.apple.com/kb/TS1275
    The link also has troubleshooting steps which you can try, but it is most likely some security software on your computer blocking the connection.
    The easiest quick fix would be to update on a known working PC & Network connection, however making sure any security software is correctly configured should also resolve the problem, you can find troubleshooting for this at the following link: http://support.apple.com/kb/TS3125
    Hope this helps.

  • ERROR 1604 when trying to restore my ipod Touch

    Hi all,
    I am trying to do a restore on my ipod Touch(32GB)but get the message "Unable to restore...unknown error 1604." Anyone know what this error is? I'm trying to restore and every time it comes up with this error and what is happening is that it is not asking for restore alone it is asking for both Restore and update both at the time of restoring when my ipod is connected to my computer..
    Guyz please Help in trouble.
    Any thoughts?(I'm using iTunes8.0 on a PC running XP Home.
    Thanks for your help!!
    Dayapreet Singh.

    Hello CHITDAYA
    There is MANY troubleshooting steps that you could attempt to resolve this issue. however there is many, steps to follow in the following link
    http://support.apple.com/kb/TS1275
    however I would recommend simply restore on another computer if you can get access to one. to save you a lot of time.
    Cheers

  • SSRS 2008 Created Commssion Report, now getting error message when I run this ( need Help)

    in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error  
    message when we entered some invoice # see below screen shot of error message
    but same time if I enter different invoice # it process the report without any error message , donot understand the problem
    what's causing this issue, I have looked each sub report,
    can some one suggest any idea,
    I have spent hrs to figure it out, no luck so far.
    thanks in advance
    see the 2nd screen shot with report process
    any help will be greatly appreciated

    Hi Wendy
    thanks for your reply
    I tried creating new report , I have 1 main report and 3 sub report on this
    on main report when I enter some invoice# and accountnum  data shows up with no problem,
    but same time if I enter different invoice# and accountnum , there is no data return  on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
    not pulling for some invoices,
     other strange thing , I created this report , year ago, there was no problem until now,
    all of the sudden this problem just shows up,'
    I am not that expert in sql , can I really use advise
    see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
    SELECT        VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
                             CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
                             VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
                             VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
                             CUSTINVOICETRANS.INVOICEDATE
    FROM            SALESTABLE INNER JOIN
                             CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
    INNER JOIN
                             CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
    AND
                             CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
                             VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
    AND
                             CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
                             LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
                             VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
                             VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
                             VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
    WHERE        (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
                             AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2)

  • Disappearing of error message when i click on f4 help

    Hello all,
    I've got a little problem with displaying messages in WebUI (CRM 7.0) .
    when i do some wrong entries in assingment block and then i press enter then it display error message but
    when i click on f4 help the error message got deleted from the ui.
    I want error message to be displayed till entry is not filled with right value.
    I have written this code in modify method of handler class.
    lr_core = cl_crm_bol_core=>get_instance( ).
          gr_gmsg = lr_core->get_global_message_cont( ).
          gr_gmsg->add_bapi_messages( it_bapi_messages = lt_return
                                      iv_show_only_once = 'X' ).
          lv_object_id =  lr_bp->get_object_id( ).
          lr_msg_cont ?=  lr_bp->get_message_container( ).
          lr_msg_cont->add_messages(
                           iv_object_name   = me->tv_object_name
                           iv_object_id     = lv_object_id
                           it_bapi_messages = lt_return
                           iv_show_only_once = abap_true ).
    Regards,
    Nawal Kishore

    Hi Nawal,
    What is happening now is, the error messages are set to be displayed only once in the Web UI after the message is
    added to the message container. In the next round trip these messages will get cleared since you have passed
    the parameter 'iv_show_only_once' as true in both the add message methods. You should pass this parameter
    value as false in order to retain the error messages on the UI across the round trips. You can simply remove that
    parameter from the method as by default this parameter takes the value as 'false'.
    Regards
    Leon
    [SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

  • Error Message When Upgrading Firmware for BEFW114S

    To all,
    I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02  However, I got the following error message when I tried update the firmware:
    Message:  Warning!  Upgrade File Pattern Error
    Any ideas of what might be causing this.
    Thanks.
    Babylon5

    Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
    Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

  • Receiving a -43 error message when upgrading to ios5.

    How do you get past error code -43  when upgrading to ios5 on ms vista??

    The only solution that I've found was here
    http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
    and here
    http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
    by:
    1. Doing backup.
    2. Using the Restore button and following the
    All works fine now and all the settings are there.
    BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

  • Error 1921 when downloading i Tunes! HELP!!!

    I keep getting error 1921 when downloading i tunes 7. I have a new 30 G i pod--this is the first one ever installed on this computer. Any help would be much appreciated. I've been working on this since 5:30pm this afternoon!!!

    That's it, just error 1921?

Maybe you are looking for