Error 1607--I know there's alot of these threads, but PLEASE read.

First of all, I have searched this error in the discussion boards & read alot of posts & gone to the links listed.
My computer came with Itunes on it, however, it said that I needed to update the version either by software CD or from the website. I tried the CD, than downloading from the internet. During the setup, it completes the Ipod download. Then when it starts the Itunes download, it shows the Error 1607. I've tried uninstalling all quicktime, itunes, & ipod software. I've disabled my antivirus & antispyware stuff. I am the only user, so I have administrative rights.
I've also looked at the 3 scenario links on the Ipod website. I seem to have problems while working through the steps on those. To hopefully get a better solution, I'll try to explain step-by-step what I've come to.
1. iTunes for Windows installation quits with 1607 error, while publishing product information, or is interrupted (Scenario 1)
----When I go to this link, it tells me I need to re-install windows. I can't find that CD (i know i have it somewhere). And, I would kinda like that to be my last resort because I don't want to have to save all my files, etc. I've downloaded & put things on my computer alot before with no problems, and the Ipod part of the download worked, just not the Itunes part. So doesn't that mean it's not the installer?
2. You may receive a "1607:Unable to install InstallShield Scripting runtime" error message when you try to install software in Windows XP (Scenario 2)
----"To reinstall the InstallScript engine from InstallShield Developer."
* When I get into Windows Explorer, I can't find a file called InstallShield.
----"Running Setup from a virtual drive"
* I did what this said, but nothing ever came up.
----"Register Idriver and Msiexec"
* At this step, when I try to run the two things it tells me to, it says it cannot be found.
----"Change Permissions"
*I've changed settings to show all files.
*When I search for C:\Windows\Installer, I don't get an installer folder. Instead, I have a bunch of folders with titles like this "{0EB5D9B7-8E6C-4A9E-B74F-16B7EE89A67B}".
----"Stop other instances of Windows Installer"
*When I look at the processes I have none of these things.
3. Error -1607: Unable to Install InstallShield Scripting Run Time (Scenario 3)
----"Update the ISScript engine on your computer by downloading the latest one."
* I went to that next link and downloaded that, & I have a IsScript7 icon on my desktop so I assume that did what it was supposed to?
----"Make sure that the Installer folder in the Windows directory has full access privileges."
*Already done in Scenario 2.
----"Set the Installer folder attributes."
*Like I said above, I get folders with really long number/letter names. I don't have an "installer" folder to click on.
----"Make sure that the InstallShield registry key in the Windows registry has full access privileges."
*I changed all to full control.
Okay, so I hope I have been specific enough so that I don't get "go to this website & do these steps." I understand that people probably ask this question all the time & I REALLY have tried to fix this. I just don't know what to do.
Help PLEASE! I really wanna use my Ipod Nano that I've had for 2 weeks now!
HP Media Center PC Windows XP

Good Day,
I am haveing similar problems,
Error 1325.T and 1603
I have tried to uninstall and reinstall from the CD. I then get; iTunes Library cannot be read because it was created by a newer version if iTunes, this comes up when I try to open iTunes from the desk top shortcut.
Thanks in advance,
Drew

Similar Messages

Error loading transcode preset (yes I know, again, but please read)

I am new to most of the Adobe products and recently purchased Adobe creative suite cs4 master. I make slide shows, haven't tried any video yet. I am making a several-disc large set of slideshows of a European vacation for a friend of mine. There were roughly 2000 pictures, most of which I edited in Photoshop.
I built the slideshows in Encore and burned the first three DVD's no problem. They play well on a dvd player attached to a TV. The current DVD I'm trying to burn gives me the message "Error Loading transncode preset. I have spent many hours researching this online, and I do some some references and fixes for it here on this forum. However they are not working for me. I went back and looked at my DVD's that burned properly and tried to make everything the same, but I still get the same message.
The first couple of tries, the burn process always stopped when loading the same song, so I removed it and put a different one in. This project has 4 slideshows in it, about 10 songs and nothing else.
I have a Dell Precision T3400 and am using XP Pro service pack 3. It has Intel(R) Core (TM) Quad CPU, Q6600 @ 2.4 GHz with 2.39 GHz 3.00 GB RAM. I have Creative SB XFI sound and MVidia Quadro FX 1700 video. I dont know what else you need in the way of documentation.
I have rebuilt this whole project once already and now I still cant burn it from the second build.
I know this question has been asked already, but I tried one of the suggestions about removing the stuff in the Source Folder which didn't work for me. I don't understand some of your complex terminology but I am willing to learn anything.
Is there someone who would adopt a newbie and help me wade through some of the terminology I haven't picked up yet? I'm a quick learner and am building my own terminology dictionary as I go.
Thank you for listening. I hope you can help.

Here is more information about my Encore slideshows. The DVD I'm trying to make has 5 slideshows in it, no timelines and no playists. Each of the slide shows have between 55 and 75 jpeg images in them and between 1 and 3 wma or mp3 music files in each one. There are more .wma than .mp3 music files, and many of them I first edited in Soundbooth to make it exactly the same length since it is going into a slideshow and not a timeline. The lwma files I try to remember to save as mp3 files thinking they would be easier to transcode. Honestly I know so very little about transcoding that it's virtually impossible to help myself with that. I have yet to find a good tutorial on that.
Regarding the images in all the slideshows, they are all jpg files and are mostly 600x800 in size. Most of them are 95kb or less in size. They were taken with the same camera except for a very few, less than 1% that I added for effect. One image that I just looked at is 180 ppi. I didnt create it that way, because I dont know how. The size in inches of the images are around the area of 7.8 inches x 6.7 inches. The mode is RGB.
Regarding linking, I set the menu, which is an encore template and have used the same menu for all DVD's, as first play object and then link the menu to the first slide show, each slideshow to the next, and have end action of the last slideshow returning to the menu. I have kept this as simple as possible because I'm new to Encore and most of the CS4 master suite. My plan is to learn Premiere Pro and do the slideshows there but wanted to get this big one done as quickly as possibly. I edited most of the 2000 images all in Photoshop so it has been a timely process.
I am unable to open this project anymore without getting an error message saying "[..\..\Src\Clip\VideoClip.cpp-275]" This happened after I tried the suggestion to delete everything out of the transcode folder for this project. I did that, but when I reopened my project, it didnt ask me to locate any files and only gave me the above error. When I click on on the error, Encore crashes. So I cant do the screen shots of my project.
I'll be glad to add any information I inadvertently left out. Thank you in advance for any help you can give me.
Ginny

McAfee keeps sending me messages to buy, I know there is a way to kill but no longer have the instructions

I know there is a way to kill this advertising and I don't remember how. Does anyone know how to do it?

You do have to download something.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.

I know there are tons of these videora questions, but I need a little help

Okay, I do everything JUST like I'm supposed to, and the video even appears on my desktop. But when I try to drag to my iPod, it just doesn't do anything. Not an error message, it just sits there. Can someone help me?
Windows XP

Go to this site for an answer:
http://www.pspvideo9.com/forums/index.php?c=8

ITunes knows there is music on my iPhone, but it doesn't show up in iTunes!?

I recently got a new laptop and today I downloaded iTunes onto it. I have to latest version of everything (4.3.2).
I plugged my iPhone 4 into the laptop and everything downloaded well and everything is fine. iTunes recognises I have 779 songs on my phone and all the apps and videos and things. However, iTunes does not allow me to see these songs in iTunes itself. Under the 'Playlist' heading, it only says 'iTunes DJ, 90s music, Classical Music' etc that are default playlists.
When I go onto the music page of my iPhone under 'Devices', I have to option to 'Sync music', but this then brings the capacity bar right down to hardly anything, so if I were to apply the changes, it would delete all of my current songs on the iPhone.
I've looked everywhere and I don't know how to solve to problem. Please help!

In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only. When transferring iTunes content from another computer, all iTunes content on the iPhone that was transferred from a different computer will be erased from the iPhone first. The same applies to photos transferred from a computer.
To avoid this, you need to transfer your iTunes library from your old computer to your new computer following the instructions included with this link.
http://support.apple.com/kb/HT1751

J2EE Best Practices on Cache (I know there's a lot of answers but...)

Hello friends,
i'm developing a JSP-Servlet MVC application and I have the following problem. I want to control errors at low level, so i want to permit send a form, presenting a error message in a new window with a back button that cals history.back(). The problem is that I want that user data must not be rewrited. I hope that form backs to exactly the same point before user submits. When i play with the cache headers, all i get is have the data back, but when i try to submit from selects or change anything ans submits, the response is the same, like if I repaeat the same inputs.
I tried cache-control: no-cache,no-store,post-check=0,pre-ceck=0
and the HTTP1.0 pragma no-cache
all with expires clausule. But i can't get what I want. Browser disables submit button, and if not I have problems with selects onchange (which acts in fact like a submit by the button) and when I fight that troubles, then I find that user must rewrite the form data during a histroy.back() event.
So my question is, once i said all this things, which is the best way to implement that functionality??
Please help me it's very improtant for me, i've read HTTP RFC inclusive, but I just don't get it after combine everything from my JSP filter (setResponse).
Thank you very much in advance, hope you can help me

What kind of TV is it?
The most common way to hook up a laptop to an external display is with the VGA connection.
VGA connections are fairly common on modern flat panels. If you're trying to connect to a standard definition CRT(tube) TV, an s-video video connection may be possible if both the laptop and TV support s-video. Quality will be poor, however.
Disclosure: Former BBY employee.

Is there something wrong with my phone? Please read...

I have a couple questions, first off I have only had this phone for about a week and am not sure what I am experiencing is "normal"
First off, safari continuously freezes and crashes, no matter what I am doing it will just close out of it, sometimes as little as 10 seconds after the page loads.
Secondly, the left side of my phone is letting light from inside the phone shine through and this is very annoying, especially at night when I am watching youtube videos or something and all I can see is the light coming from the phone. And lastly, the bottom left screen is raised above the silver lining of the phone while the other side is below it, is that normal?
Also I went to submit a repair thing and it said that there was already an open repair going on so I couldnt submit a new one, does anyone know why this is?
All help is appreciated, thank you!

I went to submit a repair thing and it said that there was already an open repair going on so I couldnt submit a new one,
Where did you buy your phone? From Apple or AT&T? Was it new?
Did you buy a used phone that somebody dropped before selling it to you?
(jk)

Ford f-150 (I know but please read post) CD changer with MP3

I have a Ford F-150, I made a MP3 disc using itunes. Well needless to say wading through 170 songs is a bit combersome. When reading the owners manual for the truck (I know, odd) they were describing how to use the buttons and features. There is a way to change folders but I can't seem to figure out how to burn a disc with folders that I can scroll through. On to the question, Now that I have created playlists how do I put them onto a disc such that the radio will see them properly and be able to use the folder feature?
Thanks in advance,
Thunderslide

thunderslide wrote:
I have a Ford F-150, I made a MP3 disc using itunes. Well needless to say wading through 170 songs is a bit combersome. When reading the owners manual for the truck (I know, odd) they were describing how to use the buttons and features. There is a way to change folders but I can't seem to figure out how to burn a disc with folders that I can scroll through. On to the question, Now that I have created playlists how do I put them onto a disc such that the radio will see them properly and be able to use the folder feature?
Thanks in advance,
Thunderslide
If you sort the playlist by Album or Artist, the MP3 CD will be burned with folders.
You can get more details in the article How to set the play order of songs on an MP3 CD.
There have been a few bugs reported in MP3 CD burning in iTunes 8.x, but hopefully this will work correctly.

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

There was an error processing a page. there was a problem reading this document (110)?

hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDI

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

Trying to install iPod software on Windows XP - keep getting Error 1607!!

We bought my daughter an iPod for Christmas. I've been trying to get the software installed for over two hours!! I've been to the website for the download, I've tried it from the CD, I've tried it from links in these posts--nothing works!! I keep getting Error 1607 (a runtime error). When I go to the step by step solutions, absolutely NONE of them apply to me. It sounds (reads) like alot of people are having this issues today. Has anyone found a REAL solution!!

Exactly the same problem ! Ruined my son's Christmas ! Can't get through apple's tech support due to high volume of calls. If you read their return policy if it's DOA(Dead On Arrival) your entiteled to a refund or exchange. Call 1800 275-2273, good luck getting through. I dont feel after spending that kind of money I should have to waste hours upon hours on downloads, upgrades and software installations and still may have problems once you get to I-tunes.They have a hugh problem here ! Hopefully they have a better consumer care policy and give people their money back ! Good Luck, AC

Error: 1607 Please Help!

A friend bought a new IPod Nano, and receives the 1607 error message during Installation of ITunes. Being there local go to guy i tried to resolve there problem but to no avail. (The error turns up on both "CD" and Latest download versions) I have tried all the solutions suggested by Apple's support troubleshooting information but still can't seem to get around this error. Has anyone had any experience with this error and found a solution that hasn't been mentioned? Any help would be greatly appreciated. Thanks in advance.
-Grant

hi Grant!
I have tried all the solutions suggested by Apple's support troubleshooting information but still can't seem to get around this error. Has anyone had any experience with this error and found a solution that hasn't been mentioned?
okay, it already sounds like you've found this:
http://consumer.installshield.com/kb.asp?id=Q108340
... and this:
http://docs.info.apple.com/article.html?artnum=300361
... but we have also had another recent report of a cause for the 1607:
Matt Bennett1, "iTunes 6 - Error 1607 - Solution", 11:01am Oct 18, 2005 CDT
... and the InstallShield Tips and Pointers on installation best practices are also useful when dealing with a recalcitrant 1607:
http://consumer.installshield.com/faq.asp#ts
... and in some cases
b method 1
from this document can also help:
http://support.microsoft.com/default.aspx?scid=kb;en-us;555175
keep us posted.
love, b

Everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling

Exchange 2003 Removal fails w/ Error code 0X80072030 (8240): There is no such object on the server- pls read

Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
                                "initials,displayName,physicalDeliveryOfficeName," & _
                                "telephoneNumber,mail,wWWHomePage,profilePath," & _
                                "scriptPath,homeDirectory,homeDrive,title,department," & _
                                "company,manager,homePhone,pager,mobile," & _
                                "facsimileTelephoneNumber,ipphone,info," & _
                                "streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
                                   strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
                objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
                objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
           Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
Alex

I kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

Error 1607--I know there's alot of these threads, but PLEASE read.

Similar Messages

Maybe you are looking for