Error 1671 on iPad restore

Our iPad 3rd gen will not leave recovery mode. I plug it in, do the factory restore as set out in apples tutorials online. Software starts to download and after the 3/4 hours worth of downloading a unknown error code appears - 1671. I can't find anything to fix this.
I do the whole home/power button, plug into iTunes and follow all instructions. It seems to be working then at the final second comes up with this error then iTunes ejects the iPad and I'm back at square one.
Can anyone offer any help or advice?

Error 6: All of the steps in this article apply to this issue. Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Above from:
http://support.apple.com/kb/TS3694

Similar Messages

  • Error 3259 and ipad 2 restore

    I have an ipad 2 and the current version of itunes.  All of this happened yesterday after I tried to update to the newest IOS.
    The ipad screen shows the connect to itunes screen.  When connected to itunes it wants to restore but wants to restore with update.  Every time I run update it runs about 1/2 way and then goes to error 3259. 
    The itunes screen on the computer shows the ipad as n/a serial number and from the itunes menu I cannot restore it at all.  The ipad hasn't been hacked and ran perfectly before I started the update yesterday morning.
    Help?!?!?

    If you've tried a different computer and different cable and still get the 4013 error then, from iOS: Restore errors 4005, 4013, and 4014 :
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

  • HT4623 ipad restore error code3

    Hello everyone, I try to restore ipad 4 (3G) to ios 7.1 and (ipad can not be restore,error 3) come up, what is that mean? Now I have a brick ipad. I try to google and found no solution, if anybody know anything about this error code 3 please share it I would very much appreciate.

    https://discussions.apple.com/thread/5372052
    https://discussions.apple.com/message/24418028#24418028
    more
    https://www.google.dk/search?q=iphone+restore+error+3&oq=iphone+restore+error+3& aqs=chrome..69i57j0l5.5087j0j8&sourceid=chrome&es_sm=91&ie=UTF-8

  • Restore Error 3 in iPad 3 plz help me

    Restore Error 3 in iPad 3 plz help me

    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom
    Suggest you delete iTunes on your computer and reinstall. http://support.apple.com/kb/HT1923
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
    Message was edited by: Texas Mac Man

  • TS3694 I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"

    I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
    Can anyone help me?

    Are you using the latest version of iTunes?
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • IPad Restore Error 1600, 1601.

    Hi, receiving errors 1600, 1601 when restoring iPad1 despite using latest iTunes, OSX and troubleshooting USB connections and ports. Any ideas people? Thanks!

    I just experienced the same errors on a restore, tried multiple times.  Someone came up with the suggestion to try it on another machine.  I loaded iTunes on an older PC, attached my iPad and it started and finished in short order the restore.  I moved the restore file from the original pc to the older one in the same location as it was on the unit that gave me the errors.  Then when it worked, it attached to the original machine and synced my apps back that were in that iTunes version.

  • Ipad restore fails error 2003

    Was loading latest iPad update and it hung.  Itunes indicated the iPad needed to be restored.  Clicked on restore and received error 2003.

    Same thing here.  I have an iPad 2 that was running iOS 5.0.1.  Everything worked fine when without any kind of sync over cable or wifi, all apps including free and purchased ones disappeared.  When I did connect it to iTunes, all apps were unchecked. So, I checked my apps, did a sync, and they all returned but missing all app data.
    Long story short, things got a little flakey and I wanted to start from scratch so I plugged my iPad in to install the factory default firmware but I get the following error, " The iPad "iPad" could not be restored. An unknown error occurred (26)." Tried this in DFU mode and in regular restore mode (when the iPad screen says to connect to iTunes). I tried different versions of iTunes and machines, OS 10.6, 10.7, and Windows 7, all giving the same error.  When attempting a restore, it goes through "Extracting software, Verifying iPad restore with apple, preparing iPad for restore, waiting for iPad, preparing iPad for restore, verifying iPad restore."  After the progress bar on the iPad is there for about 30 seconds, ERROR. I tried different things for hours with iOS 5.0.1, and I also get the same error with iOS 5.1, which was released today.

  • I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Getting error message "The ipad software update server could not be contacted. You do not have enough access privleges for this operation" When trying to restor ipad mini

    When I try to restor my ipad mini I get the error message "Te ipad software update server could not be contacted. You do not have enough access privleges for this operation."  Please help!!

    I also have same problem i dont knw what to do ???????????????? have u got any solution >>????

  • HT4097 Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help

    Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
    I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internet

    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • HT1414 when trying to restore my ipad gen 1 it hangs on "Verifying ipad restore with Apple" then returns an error 1602

    I have tried to restore my ipad gen 1. When it gets to the Verigying ipad restore with Apple" it seems to hang then returns the error 1602. I have the black screen on my ipad so cannot get to the shut down bar. The ipad has not been tampered with or jail broken. it suddenly would only show the apple symbol for 5 or so seconds then go to a blank screen and then 30 or so seconds later show the apple symbol again. This only happens when plugged into its factory charger.

    Have you tried the troubleshooting on this page : http://support.apple.com/kb/TS3694#error1603 ?

  • I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194).

    I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • Message error (-1) when I restore my ipad via itunes

    Could you help me to identify this error. Enable to restore my ipad. Error (-1)?!!!!
    My ipad is blocked!!! What is the problem?

    Please see here for further help and explanations on how to solve
    http://support.apple.com/kb/TS3694
    Best wishes, Ct

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

Maybe you are looking for