Error 1714 and error code 3 when attempting to install

I'm trying to install iTunes 6 with Quicktime 7.3, and the iTunes installation seems to go through fine, but when it gets to Quicktime, I always get those errors. It says that I do not have the file quicktime.msi in some temporary folder, and I can't find that file manually either. I currently have Quicktime 6.5 installed, but it seems to have stopped working since I started trying to install this new version. Also, when I try to uninstall Quicktime through the add/remove programs interface, when I click "uninstall/change". nothing happens. What should I do?

OK!!! did you figure it out?
I tried to manually do EVERYTHING since last night till now. But this deffinetly worked for me! http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
download the windows install cleaner, then find quicktime to remove, and then redownload the standalone version of quicktime.
Hope this helps!

Similar Messages

Error Code 80070005 when attempting to install KB2931356

After confirming that I am not an active victim of a virus or malware, I disable my Avast AV software and once again received Error Code 80070005 when trying to install Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008
R2 SP1 for x64-based Systems (KB2931356).
When I attempted to implement the solutions described in http://social.technet.microsoft.com/Forums/windows/en-US/61ce9777-aaac-41b5-ac02-eae76759d1d3/windows-update-error-80070005 and http://support.microsoft.com/kb/968003/en-us, which are slightly
different, I received the following output immediately after running the respectively prescribed Reset file.
I know not what to do next!
Any suggestions?
Thanks!
Jim

Yolanda,
Thank you very much for your concern and your assistance!
Unless you instructor otherwise, I will implement the following steps:
1. Download the System Update Readiness Tool from http://windows.microsoft.com/en-in/windows7/what-is-the-system-update-readiness-tool and run.
2. Shutdown PC.
3. Start PC.
4. Disable Avast Free A/V SW.
5. Install Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2931356).
6. Post outcome here.
7. If install fails, upload the cbs file (windows\logs\cbs) and windows update log (%windir%\Windowsupdate.log) here for further analysis.
Thank you, again, for helping me.
Sincerely,
Jim Kochanski
I followed all of the steps above.
When I went to install the update, seven were available and all seven failed (see below).
The log files were too large to cut and paste therefore you can find them at:
http://www.mediafire.com/view/vqm41z2bghb85fq/WindowsUpdate.log
http://www.mediafire.com/view/q9dc84kf6ftm31d/CBS.log
I was just wondering if anyone was trying to help me with this?
Thanks!
Jim

Error Code 7 when attempting silent install

Hi there,
When I try a silent install of an application, I occasionally get this logged to my .airinstall.log and .airappinstall.log files:
~/.airinstall.log
Starting silent x1 install from file:///Applications/Eye-Fi/Eye-Fi%20Center.air
UI SWF load is complete
stateRunningAppInstaller: appinstaller -runtime "/Applications/Eye-Fi/Eye-Fi Center Installer.app/Contents/Frameworks" -silent -withRuntime -url -location /Applications/Eye-Fi file:///Applications/Eye-Fi/Eye-Fi%20Center.air
App installer failed; exit code 7
begin quitting
~/.airappinstall.log
Starting silent app install of file:///Applications/Eye-Fi/Eye-Fi%20Center.air
UI SWF load is complete
UI initialized
Unpackaging to /private/var/folders/1a/1a3UlrdVEhGjua3KXTo49E+++Tc/TemporaryItems/FlashTmp0
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id fi.eye.Eye-Fi-Center
pub id E430518E652B889A80EC0E8A6E532C09FF36DF62.1
Application not located
creating native installer in: /private/var/folders/1a/1a3UlrdVEhGjua3KXTo49E+++Tc/TemporaryItems/FlashTmp1
native installer creation complete
Starting install
Destination for installed application is /Applications/Eye-Fi
stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
starting cleanup of temporary files
application installer exiting
When I look at the /Applications/Eye-Fi directory, this is what I see for permissions:
prabha-mac:OSX prabhak$ ls -ld /Applications/Eye-Fi/
drwxr-xr-x 3 root admin 102 Jan 13 16:10 /Applications/Eye-Fi/
prabha-mac:OSX prabhak$
Any ideas on why this directory isn't write-able?
Sean

Yolanda,
Thank you very much for your concern and your assistance!
Unless you instructor otherwise, I will implement the following steps:
1. Download the System Update Readiness Tool from http://windows.microsoft.com/en-in/windows7/what-is-the-system-update-readiness-tool and run.
2. Shutdown PC.
3. Start PC.
4. Disable Avast Free A/V SW.
5. Install Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2931356).
6. Post outcome here.
7. If install fails, upload the cbs file (windows\logs\cbs) and windows update log (%windir%\Windowsupdate.log) here for further analysis.
Thank you, again, for helping me.
Sincerely,
Jim Kochanski
I followed all of the steps above.
When I went to install the update, seven were available and all seven failed (see below).
The log files were too large to cut and paste therefore you can find them at:
http://www.mediafire.com/view/vqm41z2bghb85fq/WindowsUpdate.log
http://www.mediafire.com/view/q9dc84kf6ftm31d/CBS.log
I was just wondering if anyone was trying to help me with this?
Thanks!
Jim

I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

How do I override "error code -61" when attempting to put things in the Trash? Cannot empty Trash or use Secure Empty Trash.

How do I override "error code -61" when attempting to put items in the Trash? Cannot empty Trash or use Secure Empty Trash. I have a MacBook OS X 10.5.8

The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
3) the program icon will change to a "folder icon".
4) put the folder icon back into the trash and you should be able to now empty the trash.
If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
JKai

HT1925 I receive error code 2349 when trying to install iTunes. Any idea what that code means and how to correct?

receive error code 2349 when trying to install iTunes. Any idea what that code means and how to correct?

It's a better bet with a 2330, but the first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error code 0x80070BC9 when trying to install itunes

I'm getting error code 0x80070BC9 when trying to install iTunes

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?)

I'm getting an error code (A12E1) when trying to install Creative Cloud for photographers. Agraphers

I'm getting error code A12E1 when trying to install the Creative Cloud app for photographers. Can anyone help me get installed?

Hi Redrock,
Could you try the solutions described here:
http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
Thanks,
-Dave B

Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5)

Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help. Any ideas?

http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html

TS3297 keep getting error code 5002 when attempt to purchase music

code 5002 when attempting to buy music

This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

I get an error code -12 when trying to install

I was unable to unactivate it from the previous machine as the HD crashed. Now I get SDK error code -12 when the installer boots and then is crashes. How do I get LV on my new machine?
I am on WIN 7 Dell E6400
The product is LV 8.6 for NI ELVIS II

Hopefully you were able find the answer by searching. If not, please refer to this KnowledgeBase article. Instead of auto running the install CD/DVD, navigate to it manually and run Setup.exe.
Alex Person
NI-RIO Product Support Engineer
National Instruments

Error 1316 message when attempting to install Lightroom 1.1

When attempting to install the Lightroom 1.1 upgrade, I get the following message: "Error 1316.A network error installed while attempting to read from the file (file path)Adobe Photoshop Lightroom.msi."
I am trying to install the upgrade on an HP machine with 1 gig RAM running Windows XP Media Center Edition.
Any thoughts or suggestions?
TIA.

If you google "Error 1316.A network", you'll get a whole list of entries indicating that LR 1.0 was installed from a network drives and you're now installing it from a local drive. Probably the best path to take is to uninstall LR 1.0, then rerun the LR 1.1 install.
John
(Usual caveats about backing up your DB apply)

Error code: 50 when trying to install creative cloud

I'm getting an error code:50 when installing newest version of creative cloud. Any input on what to do or what this error is?

Leapdaybride error 1 indicates a generic error state. Have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to reinstall the Creative Cloud Desktop application?

Load error code 11 when attempting to open .vi from library

Hello,
Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research. The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram.
I am running Vista with 8.5.1 and attempting to open a library of version 6.0. I do not know what OS the library was compiled on. (Linux is a possibility) The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
Does anyone know what might be a way to get these sub-VIs working?

Okay,
File posted. Someone please tell me if this has a block diagram on it.
Attachments:
Find First Error.vi ‏24 KB

Error code (-37) when attempting IOS5 update

I updated to Itunes 10.5 - no problem, in readiness to update to IOS5 on my Ipod 4th Gen and my Iphone 4.
However when I try to update the Ipod it is not even getting past the backup part of the upgrade (step 1), I keep getting "error code (-37) cannot back up" and it states if I continue all data will be lost.
there is not a problem with the connection as I have just updated an Ipod 3G to IOS4.2
Any ideas - I dare not even attempt the Iphone - the ipod was the trial!!!

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Error 1714 and error code 3 when attempting to install

Similar Messages

Maybe you are looking for