Error 1722 Installing Anyconnect VPN (Windows 7)
Hi,
i'm trying to install Anyconnect VPN Client (anyconnect-win-2.5.2006-web-deploy-k9) to connect the university wifi, but i always get an error 1722
There
is a problem with this Windows Installer package. Ein Programm, das als
Teil des Setups ausgeführt wird, wurde nicht wie erwartet beendet.
Contact your support personnel or package vendor.
I had this error and i couldn't fix it and i reinstalled the Windows 7 (HP Compaq 610). Than i could install the AnyconnectVPN. Today it tried to update, than i get the same error. Now i can't use it and i can't install it.
There are a lot of people with this problem but there is no information in internet to fix this problem.
I really need help. I don't want to reinstall the windows. (It's also not a solution).
There is a key (Standart) HKEY_LOCAL_MACHINE/SOFTWARE/..../RUNONCE without a value.
What should i do now?
Have you uploaded the AnyConnect package to the vpn gateway yet? I would recommend that you uploaded the latest version: AnyConnect version 2.5.2017.
Firstly you would need to upload the package to the vpn gateway, and you would need to use the following:
anyconnect-win-2.5.2017-k9.pkg
Once you have uploaded the package to the vpn gateway, you can download and install the AnyConnect onto your Windows 7 in 2 ways:
1) From Windows 7, assuming that the vpn gateway has been configured for AnyConnect, then you can browse to the vpn gateway ip address, and the AnyConnect software will be automatically downloaded and installed on the Windows 7 machine.
2) Alternatively, you can also pre-install the AnyConnect using the following file:
anyconnect-win-2.5.2017-pre-deploy-k9.msi
Hope that helps.
Similar Messages
-
I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...
-
Error while installing j2sdk-1_4_2_05-windows-i586-p.exe
Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
Please help me.
Thanks in advance.
PavanHi Pavan,
Is the drive not writable?
If you still need help with this, you might get more response by posting on the Java Forum http://forum.java.sun.com/forum.jspa?forumID=31. -
Error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000
Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
I have downloaded the exe and kept in C drive. Just clicked that exe to install. I haven't set any info. like drive settings. Why I am getting "Invalide Drive" Error?
Please help me.
Thanks in advance.
Pavanif my above link doesn't satisfy you, try this one : http://support.installshield.com/kb/view.asp?articleid=q107033
-
Error whiel instaling r12 on window 2003
Hi,
Am geting following error while installing r12 on window 2003.please help me to figure out the exact error.. thank you
Executing home registration for s_weboh_oh...
Registering using Registration Driver
M:\oracle\R12\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to M:\oracle\R12\inst\apps\R12_tychio\out\ouicli.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to M:\oracle\R12\inst\apps\R12_tychio\out\txkstubcfg1013.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to M:\oracle\R12\inst\apps\R12_tychio\out\apachectl
setting permissions: 700
Executing script in InstantiateFile:
M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I M:\oracle\R12\apps\apps_st\appl\au\12.0.0\perl -I M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Beginning OUI CLI cloning for s_weboh_ohSun Jun 5 18:55:13 2011
M:\oracle\R12\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath M:\SR12\startCD\Disk1\rapidwiz\jlib\java;M:\oracle\R12\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;M:\SR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;M:\SR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e M:\oracle\R12\inst\apps\R12_tychio\appl\admin\R12_tychio.xml -nolink -oaVar s_weboh_oh -homestub weboh -log M:\oracle\R12\inst\apps\R12_tychio\admin\log\ohclone.log
running OUI CLI home cloning:
M:\oracle\R12\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=M:\oracle\R12\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=R12_tychio_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=R12_tychio_WEBOH -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_weboh_oh with return code: 0Sun Jun 5 19:05:13 2011
[SC] ChangeServiceConfig SUCCESS
.end std out.
.end err out.
Executing script in InstantiateFile:
M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I M:\oracle\R12\apps\apps_st\appl\au\12.0.0\perl -I M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to M:\oracle\R12\inst\apps\R12_tychio\out\ouicli0.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to M:\oracle\R12\inst\apps\R12_tychio\out\txkstubcfg10130.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to M:\oracle\R12\inst\apps\R12_tychio\out\apachectl0
setting permissions: 700
Completed home registration for s_weboh_oh
Executing home registration for s_tools_oh...
Registering using Registration Driver
M:\oracle\R12\apps\tech_st\10.1.2\appsutil\driver\regclone.drv
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\adouitools.pl
dest : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\ouicli.pl
backup : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\ouicli.pl to M:\oracle\R12\inst\apps\R12_tychio\out\ouicli1.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\txkstubcfg1012.pl
dest : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\txkstubcfg1012.pl
backup : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\txkstubcfg1012.pl to M:\oracle\R12\inst\apps\R12_tychio\out\txkstubcfg1012.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\ftrace_cfg_1012.tmp
dest : M:\oracle\R12\apps\tech_st\10.1.2\forms\server\ftrace.cfg
backup : M:\oracle\R12\apps\tech_st\10.1.2\forms\server\ftrace.cfg to M:\oracle\R12\inst\apps\R12_tychio\out\ftrace.cfg
setting permissions: 700
Executing script in InstantiateFile:
M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I M:\oracle\R12\apps\apps_st\appl\au\12.0.0\perl -I M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_tools_ohSun Jun 5 19:05:25 2011
M:\oracle\R12\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath M:\SR12\startCD\Disk1\rapidwiz\jlib\java;M:\oracle\R12\apps\tech_st\10.1.2\oui\jlib\OraInstaller.jar;M:\SR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;M:\SR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e M:\oracle\R12\inst\apps\R12_tychio\appl\admin\R12_tychio.xml -nolink -oaVar s_tools_oh -homestub tools -log M:\oracle\R12\inst\apps\R12_tychio\admin\log\ohclone.log
running OUI CLI home cloning:
M:\oracle\R12\apps\tech_st\10.1.2\oui\bin\setup.exe -nowait -debug -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=M:\oracle\R12\apps\tech_st\10.1.2 oracle.as.j2ee.top:s_asInstanceName=R12_tychio_TOOLS oracle.as.j2ee.top:s_adminName=ias_admin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=R12_tychio_TOOLS -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I M:\oracle\R12\apps\apps_st\appl\au\12.0.0\perl -I M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\txkstubcfg1012.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\adouitools.pl
dest : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\ouicli.pl
backup : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\ouicli.pl to M:\oracle\R12\inst\apps\R12_tychio\out\ouicli2.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\txkstubcfg1012.pl
dest : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\txkstubcfg1012.pl
backup : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone\txkstubcfg1012.pl to M:\oracle\R12\inst\apps\R12_tychio\out\txkstubcfg10120.pl
setting permissions: 700
instantiate file:
source : M:\oracle\R12\apps\tech_st\10.1.2\appsutil\template\ftrace_cfg_1012.tmp
dest : M:\oracle\R12\apps\tech_st\10.1.2\forms\server\ftrace.cfg
backup : M:\oracle\R12\apps\tech_st\10.1.2\forms\server\ftrace.cfg to M:\oracle\R12\inst\apps\R12_tychio\out\ftrace0.cfg
setting permissions: 700
M:\oracle\R12\inst\apps\R12_tychio\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\5.8.3\lib -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I M:\oracle\R12\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I M:\oracle\R12\apps\apps_st\appl\au\12.0.0\perl -I M:\oracle\R12\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread M:\oracle\R12\apps\tech_st\10.1.2\appsutil\clone
ouicli.pl INSTE8_APPLY -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
M:\oracle\R12\apps\tech_st\10.1.2\appsutil\driver\regclone.drvShuq,
Please see my last reply in this thread -- Error - Installing Oracle EBS 12.1.1 for Windows (32-bit) on XP Prof SP3
Thanks,
Hussein -
HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.
I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.
There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before. -
Cannot open key error while installing itunes on windows vista 64bit
I have downloaded iTunes to my desktop, disconnected from net, disabled firewall, and ran as administrator. Now I get an error saying: Could not open Key: UNKNOWN\Components\DA42BC89BF25F5BDOAF18C3B9B1AEE8\FD563AF386D2DE54F8388C8A8336 E1534 verify that you have sufficient access to that key or contact you support personnel. Any suggestions??? Have tried for several weeks, to get iTunes 9.0 to install & run, am very frustrated, please help!!!
This is caused by a permissions issue with some of the apple registry keys. You need to uninstall every apple application and fix the registry permissions. I have written up the details of this below which I am sending to Apple support:
Issues with Iphone Sync on Windows 7 64x after migration
1) Uninstall all Apple Software components in the order recommended
a. Itunes
b. Quicktime
c. Apple Software update
d. Apple mobile device Support (Note: If this does not uninstall – It could be related to Registry permissions. Make sure to do Step 4)
e. BonJour
f. Apple Application Support
2) Verify all Itunes Related components are completely uninstalled (Refer to http://support.apple.com/kb/HT1923)
3) Try to Reinstall Itunes
4) If you receive Error during install : Cannot Open Key: UNKNOWN Components/
a. Get into the registry Start >> Search Programs and Files >> Regedit
b. Access the following Location: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Co mponents
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
5) Reinstall Itunes
Good Luck
cyn -
Error while installing j2sdk-1_4_2_08-windows-i586-p
when I tried to install j2sdk-1_4_2_08-windows-i586-p by running the installer j2sdk-1_4_2_08-windows-i586-p.exe, a massage box displayed with this error:
Java(TM) Update (1.4.2_08-b03) can not be installed on this machine because the Java(TM) virtual machine is currently running.
Please cloase all running Java(TM) applications espicially browsers.
The problem is that no browsers were opened, and no JVM is running!
could any one help me.if my above link doesn't satisfy you, try this one : http://support.installshield.com/kb/view.asp?articleid=q107033
-
Error when Installing OBIEE on Windows 2008 r2
Hi all
When Install Oracle BI 10.1.3.4.2 on Windows Server 2008 r2 x64I have several errors in install log:
(Aug 13, 2013 8:52:46 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
I found several discussions on this, but there was no solution.
JVM - jdk1.6.0_37 and it works fine. Tried to use x86 and x64 jdk. No reason.
I tried to install "as administrator", but it did not worked. Copy the install folder to the C:\, run with comtatibility with Windows7 and got the same error.
I install the same OBIEE on other servers and it was no problem to install.
Please HEEEELPHi Agha,
Yes, You can install a Windows 2008 Enterprise R2 machine as additional domain controller along with Windows server 2008 Enterprise SP2 DC's. There will not be any issues.
Before you add a domain controller that is running Windows Server 2008 R2 to an Active Directory forest run Adprep.exe from the Windows Server 2008 R2 media on your existing domain controllers to prepare your domain and forest.
http://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
Error when installing RAC on windows 2000
Hi,
I'm installing Oracle 9i(9.0.1.1.1 EE) RAC for the first time. It has been an interesting experience,
with many bumps in the road. But now I'm stuck.
I have installed the 9i EE software, but when I try to create a database ( using DBCA), I get an error :
PRKR-1005 : adding of cluster database cludb configuration failed, PRKC-1018 : Error getting coordinator node
The error occurs after I have finished configurating, and the actual database creation starts.
I did get another error earlier : PRKR-1028 "raw device \\.\srvcfg is invalid, [HINT: initialize raw device by using
'srvconfig' tool]
That error disappeared after running srvconfig -init.
I have restarted the Oracle GSD services on both machines, but I still get the same error.
The OS is Windows 2000 Advanced Server, running on a Compaq Cluster.
Br,
StefanFor more information about it:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez -
Error In Installing AddOn on Windows Server - 2008
Hello,
I have created an addon on Visual Studio 2005 in Windows Server 2003 OS and then packaged that using B1DE Tool as ard file and run that on my system and the addon is working properly . But when i want to run that addon on system with operating System as Windows Server 2008 the addon is not getting installed and is giving as error message " Incorrect Format " and not even the exe of addon is not running on that server machine .What to do so that my addon works .
Thanks & Regards
AmitHello ,
My main problem occurs while creating the ard file .Normally While building AddOn installer file system creates .Ard file in Bin Folder. But when i creates the Ard File by changing the Target CPU as x86 Then a folder named x86 get created in the bin folder of AddOn Installer file without any ard file in that folder.Then i again build the addon installer project and copies the
Exe file of x86 folder & Ard File of Bin Folder and deploy that on Server 2008 .Then the system is throwing a message "
Wrong Digital Signature " that's where i am facing problem while creating ard file bychanging the compile mode to x86.
Please suggest since its causing me problems in deploying on Client Server .
Thanks & Regards,
Amit -
Error while installing R12 on Windows 8.1
Hi,
I am trying to install R12 - vision on Windows 8.1 (just fyi I have cygwin , and Microsoft Visual Studio 2008 installed on my laptop).
During the installation i am getting the following error:
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Tue Nov 19 01:43:30 CST 2013
>> Rapid Wizard source location : C:\OracleR12Stage\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : akhil.home.com
Host Operating System : Windows (32-bit)
User running Install : Akhil
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Express Install
Disabling OCM Configuration
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
ExpressInstallPanel
Writing configuration file to: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt
Adding ports for Server0_akhil
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_akhil
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\oracle\VIS\apps\apps_st\appl\admin\akhil\conf_VIS.txt
Adding ports for Server0_akhil
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_akhil
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\oracle\VIS\inst\apps\VIS_akhil\conf_VIS.txt
Adding ports for Server0_akhil
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_akhil
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\Users\Akhil\AppData\Local\Temp\11190143\conf_VIS.txt
Adding ports for Server0_akhil
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_akhil
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\Users\Akhil\AppData\Local\Temp\11190143\
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=AKHIL
,Username=Akhil
,PC-Name=AKHIL
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME available:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0
Database ORACLE_HOME admin folder available:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_akhil
Database Install Out Directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_akhil\templbac
Database Install Out Directory available:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_akhil\templbac
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\oracle\VIS\db\apps_st\data
Database OraInventory File Directory available:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP admin available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\oracle\VIS\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\oracle\VIS\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\oracle\VIS\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\oracle\VIS\inst\apps\VIS_akhil\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\oracle\VIS\inst\apps\VIS_akhil\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\oracle\VIS\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt
Adding ports for Server0_akhil
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_akhil
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 756369.40625
Disk space on system acceptable:
Database System File Directory = C:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 750769.40625
Disk space on system acceptable:
Database Log File Directory = C:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 730569.40625
Disk space on system acceptable:
Database Transaction File Directory = C:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 729619.40625
Disk space on system acceptable:
Database Archive File Directory = C:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 626269.40625
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 561769.40625
Disk space on system acceptable:
APPL_TOP mount 2 = C:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 555969.40625
Disk space on system acceptable:
APPL_TOP mount 3 = C:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 553169.40625
Disk space on system acceptable:
APPL_TOP mount 4 = C:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 544769.40625
Disk space on system acceptable:
COMMON_TOP = C:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 541669.40625
Disk space on system acceptable:
Apps ORACLE_HOME = C:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 538469.40625
Disk space on system acceptable:
Tools ORACLE_HOME = C:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 537069.40625
Disk space on system acceptable:
Temp Directory = C:\oracle\VIS\inst\apps\VIS_akhil\temp
required = 1024.0
actual = 535669.40625
Host/Domain
command: ping -n 1 akhil
Pinging Akhil.home.com [fe80::e920:da0c:df3f:bf06%4] with 32 bytes of data:
Reply from fe80::e920:da0c:df3f:bf06%4: time<1ms
Ping statistics for fe80::e920:da0c:df3f:bf06%4:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 akhil.home.com
Pinging Akhil.home.com [fe80::e920:da0c:df3f:bf06%4] with 32 bytes of data:
Reply from fe80::e920:da0c:df3f:bf06%4: time<1ms
Ping statistics for fe80::e920:da0c:df3f:bf06%4:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleR12Stage\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin64\bin C:\MSVisual\VC
C:\OracleR12Stage\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/MSVisual/VC/BIN/cl
'cc' is available.
/cygdrive/c/MSVisual/VC/BIN/link
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has succeeded
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_db.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
instantiate file:
source : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
dest : C:\Users\Akhil\AppData\Local\Temp\11190143\akhil_VIS_apps.xml
ExpressInstallPanel
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleR12Stage\oraDB\Disk1
Not able to find s_allprod in db context
Not able to getAllProductIDs
RapidWiz location: C:\OracleR12Stage\startCD\Disk1\rapidwiz
Install Media location: C:\OracleR12Stage\startCD\Disk1
Database ORACLE_HOME: C:\oracle\VIS\db\tech_st\11.1.0
Database SID: VIS
Database Context Name : VIS_akhil
Creating DB Context: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\temp\restart.xml
Not able to find s_allprod in db context
Not able to getAllProductIDs
RapidWiz location: C:\OracleR12Stage\startCD\Disk1\rapidwiz
Install Media location: C:\OracleR12Stage\startCD\Disk1
APPL_TOP location: C:\oracle\VIS\apps\apps_st\appl
Database SID: VIS
APPL_TOP Context Name : VIS_akhil
INST_TOP location: C:\oracle\VIS\inst\apps\VIS_akhil
Creating Apps Context: C:\oracle\VIS\inst\apps\VIS_akhil\appl\admin\VIS_akhil.xml
instantiate file:
source : C:\OracleR12Stage\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\oracle\VIS\inst\apps\VIS_akhil\appl\admin\VIS_akhil.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_akhil\appl\admin\VIS_akhil.xml
dest : C:\oracle\VIS\inst\apps\VIS_akhil\appl\admin\VIS_akhil.xml
instantiate file:
source : C:\oracle\VIS\inst\apps\VIS_akhil\appl\admin\VIS_akhil.xmlHere it is:
C:\Oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_akhil\ApplyDBTechStack_11190154:
Started ApplyDBTechStack at Tue Nov 19 01:54:06 CST 2013
Version:
ApplyDBTechStack.java : 120.22
Executing home registration for s_db_oh...
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\template\adouidb.pl
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl
backup : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\ouicli.pl
setting permissions: 700
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\Perl\5.8.3\bin\mswin32-x86-multi-thread\perl.exe -I C:\oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\lib\MSWin32-x86-multi-thread -I C:\oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\lib -I C:\oracle\VIS\db\tech_st\11.1.0\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I C:\oracle\VIS\db\tech_st\11.1.0\perl\site\5.8.3\lib -I C:\oracle\VIS\db\tech_st\11.1.0\appsutil\perl C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohTue Nov 19 01:54:08 2013
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin\java.exe -classpath C:\oracle\VIS\db\tech_st\11.1.0\appsutil\java;C:\oracle\VIS\db\tech_st\11.1.0\oui\jlib\OraInstaller.jar;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\java\xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_akhil.xml -nolink -oaVar s_db_oh -homestub db -log C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_akhil\ohclone.log
running OUI CLI home cloning:
C:\oracle\VIS\db\tech_st\11.1.0\oui\bin\setup.exe -nowait oracle.aspnet_2:PRE_REQUISITE=true -clone -silent -force -nolink -waitForCompletion ORACLE_HOME=C:\oracle\VIS\db\tech_st\11.1.0 ORACLE_BASE=C:\oracle\VIS\db\tech_st\11.1.0 ORACLE_HOME_NAME=VIS_db111_RDBMS -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 1Tue Nov 19 01:57:23 2013
.end std out.
.end err out.
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\template\adouidb.pl
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl
AC-00437: Unable to backup : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\ouicli.pl: java.io.FileNotFoundException: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\manifest.txt (Access is denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00444: Unable to write to file: java.io.FileNotFoundException: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\clone\ouicli.pl (Access is denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: 700 -
ORA-03113 error while installing Oracle11g in windows vista Home Pc
Hi,
when i install oracle 11g release 2 in windows vista(32-bit). i got the error "0ra-03113 end of communication channel" .
then i retry the same, it keep on showing 49% completion. keep on installing.
kindly help me to solve.
Thanks in advance.
Regards
GGHello,
GG Oracle 10g on Vista Home is not supported and might not work correctly. IF you have Windows Vista Ultimate then go to alert.log file and see what errors you see in the log file.
Regards
OrionNet -
Jrew.exe error while installing oracle9i on windows vista home premium
Hi,
While installing oracle 9i database on windows vista home Premium editon i get Error jrew.exe has stopped . Can anyone help me to proceed with the installation.
Thanks
SreeDuplicate post:
Error JREW.EXE stopped working while installing oracle 9i on windows vista
(Unfortunately nothing has changed in the last 30 minutes). -
Error on install jdk-1_5_0_08-windows-i586-p
Hi im new to java decided i would aquire the jdk about a week ago cannot install get same error have re downloaded and still get same install error
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.wizard.service.file.GenericFileService.createAsciiFile(Unknown Source)
at org.netbeans.installer.PostInstallFixupAction.install(PostInstallFixupAction.java:112)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, create file: C:\Program Files\netbeans-5.0\nb5.0\var\license_accepted
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, patching C:\Program Files\netbeans-5.0\etc\netbeans.conf
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, err, java.io.FileNotFoundException: C:\Program Files\netbeans-5.0\etc\netbeans.conf (The system cannot find the path specified)
STACK_TRACE: 25
java.io.FileNotFoundException: C:\Program Files\netbeans-5.0\etc\netbeans.conf (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileReader.<init>(Unknown Source)
at com.installshield.wizard.service.file.PureJavaFileServiceImpl.readAsciiFile(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.wizard.service.file.GenericFileService.readAsciiFile(Unknown Source)
at org.netbeans.installer.PostInstallFixupAction.addJDKHomeToIDEConfigFile(PostInstallFixupAction.java:249)
at org.netbeans.installer.PostInstallFixupAction.install(PostInstallFixupAction.java:133)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, deleting C:\Program Files\netbeans-5.0\bin\netbeans.cmd
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, cannot find C:\Program Files\netbeans-5.0\bin\runideopenvms.com
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, cannot find C:\Program Files\netbeans-5.0\bin\macosx_launcher.dmg
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, cannot find C:\Program Files\netbeans-5.0\bin\runideos2.cmd
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, deleting C:\Program Files\netbeans-5.0\bin\netbeans
(4/09/2006 16:14:07), Install, org.netbeans.installer.PostInstallFixupAction, dbg, cannot find C:\Program Files\netbeans-5.0\_uninst\nb-uninstall.template
(4/09/2006 16:14:07), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory after installing Post Install Fixup Action (fixup): free=59406840 total=66715648
(4/09/2006 16:14:07), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory before installing Desktop Icon (desktopicon): free=59277816 total=66715648
(4/09/2006 16:14:07), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Desktop Icon (desktopicon)
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory after installing Desktop Icon (desktopicon): free=58507328 total=66715648
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory before installing Desktop Icon (programsmenu): free=58245616 total=66715648
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Desktop Icon (programsmenu)
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory after installing Desktop Icon (programsmenu): free=57971296 total=66715648
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory before installing Files (bean51): free=57917272 total=66715648
(4/09/2006 16:14:08), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (bean51)
(4/09/2006 16:14:09), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory after installing Files (bean51): free=58952712 total=66715648
(4/09/2006 16:14:09), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory before installing Storage Builder Action (storageBuilderAction): free=58850224 total=66715648
(4/09/2006 16:14:09), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Storage Builder Action (storageBuilderAction)
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, nbInstallDir: C:\Program Files\netbeans-5.0
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, uninstDir: C:\Program Files\netbeans-5.0\_uninst
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, jdkHome: null
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, TempPath: C:\DOCUME~1\User\LOCALS~1\Temp
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, Created temporary dir for SB: C:\DOCUME~1\User\LOCALS~1\Temp\mdrtmpdir
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, err, # # # # # # # #
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, err, Fatal error: Cannot create destination directory for Storage Builder.
(4/09/2006 16:14:09), Install, org.netbeans.installer.StorageBuilderAction, dbg, Deleted temporary dir for SB: C:\DOCUME~1\User\LOCALS~1\Temp\mdrtmpdir
(4/09/2006 16:14:09), Install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, dbg.install, JVM memory after installing Storage Builder Action (storageBuilderAction): free=58645792 total=66715648
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, uid: 274c5407c4fa26908310cb5c1c500000
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, Key -> Software\Microsoft\Windows\CurrentVersion\Uninstall
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, nbInstallDir: C:\Program Files\netbeans-5.0
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, First match with UID keyNames[0]: 274c5407c4fa26908310cb5c1c5000001954585180 UninstallString: C:\Program Files\netbeans-5.0\_uninst\uninstaller.exe
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, strippedValue: C:\Program Files\netbeans-5.0
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, Second match with UninstallString. Modify/Add Keys.
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, Adding value -> Software\Microsoft\Windows\CurrentVersion\Uninstall\C:\Program Files\netbeans-5.0\bin\netbeans.exe
(4/09/2006 16:14:12), Install, org.netbeans.installer.PostInstallWizardAction, dbg, Adding value -> Software\Microsoft\Windows\CurrentVersion\Uninstall\C:\Program Files\netbeans-5.0
(4/09/2006 16:14:12), Install, org.netbeans.installer.NbSummaryPanel, dbg, queryEnter ENTER
(4/09/2006 16:14:12), Install, org.netbeans.installer.NbSummaryPanel, dbg, queryEnter nbInstallDir: C:\Program Files\netbeans-5.0
(4/09/2006 16:14:12), Install, org.netbeans.installer.NbSummaryPanel, dbg, queryEnter POST_INSTALL PANEL
(4/09/2006 16:14:12), Install, org.netbeans.installer.NbSummaryPanel, dbg, queryEnter exitCode: -200
(4/09/2006 16:14:12), Install, org.netbeans.installer.NbSummaryPanel, dbg, queryEnter INSTALLATION FAILED
don't know what 2 du plz help?I had a similar problem. Like you I thought that downloading the bundled JDK with NetBeans would be great but after trying the installation on two different machines thinking there was a problem with the machine I opted for downloading the JDK from the Sun site and NetBeans from their respective site. It worked like a charm.
Maybe you are looking for
-
How to dynamically include textelement in smartforms
Hi Experts, I need to print payslip using smartform and need to take the values from pay99_result. I took all the values and filled in the internal table and passed to smart forms, but the requirement is when ever particular wage type is given for an
-
Does anyone know how to remove images from google
i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the goog
-
What setting can i change to make mozilla stop thinking my netbook is a mobile phone
what setting can i change to make mozilla stop thinking my netbook is a mobile phone. i don't know if i get the correct browser/add ons, etc updates.
-
Failure - Unable to start App in Fiori apps
Hi Experts, When i am going to access time sheet app in fiori apps, we got below error can you please guide, Can you please guide for this issue. its urgent requirements. Thanks in advance. Thanks J Jana Tags edited by: Michael Appleby
-
Can I arrange photos with an album by title? Is there a "Sort By" feature in Pictures? Is so, how?