Error 1722 on Windows XP Install

I have Windows XP Home and tried to install the Java 2 Runtime Environment (JRE) automatic and JRE manual offline. Every time the program installs it fails with a Error 1722 before it finishes. I viewed the help file and tried using the Custom option by installing the program to a different directory (/program files/java_save, but this did not work.
I would appreciate any help with this problem. I have tried everything that is listed on the Java website. Thanks

Ok guys I have so totally figured this 1722 error out. For the past 2 weeks I have been back and fourth between java support and dell support and pogo support. Just last night I figured it out!!! Ok
1- totally uninstall java from control panel
2- find a friend whos java that works, have then burn a cd of the files you need, or get the CD from java - just get the files!
explaination:
Couldn't install the program all the way - heres why
when you download them for some reason - even under manuel and offline the core zip files are empty - go to :
C - program files - Common Files - java - update - base images - j2re1.4.2-b28-
the zip files are : core 1, core 2, core 3 were totally empty, so I copied the whole java folder from common files from another computer in my house and pasted them, then re downloaded the java and the installation went through. Good Luck!
Kara

Similar Messages

  • Windows 8.1 refresh error "Drive where windows is installed is locked, Unlock the drive and try again"

    Hi all,           My model is Sony Vaio SVF15213SNB. I had upgraded to windows 8.1 about a year ago from windows 8 using windows store. Recently i had issues with my Vaio and want to refresh back to windows 8. But when i tried to refresh using Assist key on my vaio, i get an error " driver where windows is installed is locked, please unlock the drive and try again" and i am unable to refresh. Is there any way i could refresh my Vaio? Sincerely, Nilesh Wagh

    Hi NileshWagh,
    Welcome to sony Community!
    Here is the link on how to properly go back to factory setting. Please read and follow the steps carefully.
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Regards,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"

  • Cisco VPN client install fails with Error 1722 on Windows 7

    Hi,
    I am having issues with laptops upgraded from Vista to Windows 7.
    Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290.  These laptops also have Juniper Network Connect 6.5 and Citrix web client installed.  The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
    I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working.  Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
    I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful.  Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly.  This also fails to reinstall after being removed.
    I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client.  I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
    On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
    On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
    What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
    Anything else I can do to troubleshoot this issue?
    Cheers,
    James

    You should be able to install the 64 bit version of the Cisco VPN software
    Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
    You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
    http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
    If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
    MicrosoftFixit50842.msi
    (Using Shrew VPN is a possible workaround.)

  • Error 1722 when trying to install System Update

    Tried to run the install program for System Update 3.14, but keep getting the message "Error 1722.  There is a problem with this Windows installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor.  Action startsuservice.exe  Location...\startsuservice.e.c"
    I saw another post that suggested the startsuservice.exe file was missing and needed to be copied from another computer, but in my case the file is there and I don't have another machine. 
    Any suggestions?  Thanks

    Searching the forum I found another thread, not the one you mention, with a possible solution here.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Error 1722 in Windows 7 LabVIEW Installation Application Deployment

    Hi,
    I am using Application Builder in version 8.5 of LabVIEW to deploy my stand-alone executable. I've never had an issue on Windows XP, and have had many successful installation on Windows 7. However now I have a customer who gets the following error in Windows 7 (but the same installation package works fine for him on XP machines):
    Currently Installing NI-DIM 1.7.0f0, Part 10 of 19 with Error 1722.
    Error 1722.  There is a problem with this windows installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor.  Contiunue Y or N.
    Anyone (NI application engineers in particular) have any ideas? (My support contract has expired. I think there is a way to report bugs, but is there a way to contact NI support directly in addition to this forum?)
    Thanks for any help.
    Ed
    Solved!
    Go to Solution.

    UPDATE:
    Good news! My customer got back to me and told me it was his anti-virus software (Trend Micro) that caused the error. When he disabled it as I suggested (which I got from a NI knowledge base article on "Error 1722"), the installation was successful.
    Thanks all 'till next time...
    Ed

  • Disk Error after BC Windows XP Install on Snowleopard

    So when I inserted the Windows XP disc in my mac after it told me to, my computer restarted and installed Windows XP on my newly partitioned 40GB Fat32 drive (it had asked to chnage to NTSF but I selected leave without changing.  After installing Windows it said something like "Windows is installed, now restarting", now every I try to boot up with the Windows XP partition by holding down "option/alt" at start up, it goes to the black DOS like screen and says Disk Error, cannot load Windows, press any key to continue". Pressing any key does nothing, so I have to restart, and thus I am at another brick wall. 
    I downloaded some Boot Camp Snow Leopard Drivers and tried burning the .iso of it to a disc but that wasn't even working, not sure I even need to get to that step yet.
    Help?

    Got it, was supposed to reformat the drive within the windows installation.  Turns out reading the .pdf manual can be helpful....

  • Client Security Solutions error on new windows 7 install

    Work Laptop, IT guy installed Windows 7 on a hard drive and just switched out the drives.  Trying to get eveything back to the way it was on my XP system.  All I really need is the password manager with fingerprint access.
    When I open the Client Securtiy Solution I get an error:
    The Trusted Platform Module (TPM) has been configured for an operating system other than Windows Vista or Windows 7. To use TPM in Windows Vista or Windows 7, clear TPM in the BIOS Setup Utility.
    Where is the BIOS Setup Utility?  Well,  I got into the BIOS Setup Utility by pressing the blue thinkvantage at start-up, but was very hesitant about changing anything.  There was nothing that said clear TPM or similar - what exactly do I need to clear.
    Thanks
    Solved!
    Go to Solution.

    Got it fixed -  used this guide on clearing TPM http://technet.microsoft.com/en-us/library/cc753694.aspx  Maybe I posted in the wrong area for this question.

  • 14 active_x error 1722

    Hi,
    version 14 plugin installed without problems on Windows 8.1 (with msi packages downloaded from adobe), but active_x produces an error 1722 and does not install; any help welcome.
    Thanks in advance!

    The Flash Player ActiveX is preinstalled by Microsoft on Windows 8.x; you cannot install it manually.
    To update, run Windows Update.

  • Error 1722 while installing wireless button driver in Windows 8.1 64 bt

    Hi Friend ,
     I have a problem while installing the wireless button driver(sp63752),  I am getting the error 1722.
    I searched for the solution . From some solution I got I  installed the update BIOS driver sp66772.
    But even after that I am not able to install the Wireless Button Driver. And WIFI button is not working.
    My Laptop Model    :   HP 15-r022TX Notebook
    Please help.

    Hi Satya14,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post regarding the error message you are getting and “Error 1722” is a Windows Installer error. Here is a Microsoft Answers link with a couple of potential solutions why they didn't work for original poster it seems to be the general consensus from my research.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Issue installing 1.4.2_08 on XP (error 1722 problem with Windows Installer)

    First time poster guys, so be gentle.
    I have installed this older package on 20+ PCs, but this one is kicking my arse. It makes it through the install and then at the very end puts up:
    Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I have tried a TON of stuff including uninstalling, re-installing, editing the deployment.properties file, copying that file from a working PC, installing other versions (1.3.X and the latest one that downloads from the frontpage seem to work, but when I go to java.com and test to see if I have java installed, it just closes the browser). I ran it with logging turned on and got the following info.
    +=== Logging started: 10/10/2007 13:10:15 ===+
    Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action fontchecker, location: C:\Program Files\Java\j2re1.4.2_08\bin\, command: "C:\Program Files\Java\j2re1.4.2_08\\bin\javaw.exe" -XXsuppressExitMessage -jar -cp "C:\Program Files\Common Files\Java\Update\Base Images\j2re1.4.2-b28\patch-j2re1.4.2_08-b03\\FontChecker.jar" "C:\Program Files\Common Files\Java\Update\Base Images\j2re1.4.2-b28\patch-j2re1.4.2_08-b03\\FontChecker.jar" -o "C:\Program Files\Java\j2re1.4.2_08\lib\fonts\\badfonts.txt" -w
    +=== Logging stopped: 10/10/2007 13:10:51 ===+
    The java_install.log says everything extracted and unpacked fine. The jupdate log says that everything worked and ends with:
    INFO: Java(TM) Update (1.4.2_08-b03) has been installed successfully on this machine.
    But yet I still get an error during the install of 1.4.2_08 and even if a different version LOOKS like it works, it still isn't really working because the java icon in control panel never works and if I go to java.com and test to see if I have java installed it closes the browser. I have also signed in as admin and updated to IE 7.0, so I don't think a permission or browser issue is the culprit. 3 hours of my life gone. Anyone got any ideas?

    First you down load the windows inataller from the follwoing url
    http://www.microsoft.com/downloads/details.aspx?FamilyID=cebbacd8-c094-4255-b702-de3bb768148f&displaylang=en
    then you down load the offline installation package of j2sdk1.4 and install it
    http://java.sun.com/products/archive/index.html

  • Error 1722 Installing Anyconnect VPN (Windows 7)

    Hi,
    i'm trying to install Anyconnect VPN Client (anyconnect-win-2.5.2006-web-deploy-k9) to connect the university wifi, but i always get an error 1722
    There
    is a problem with this Windows Installer package. Ein Programm, das als
    Teil des Setups ausgeführt wird, wurde nicht wie erwartet beendet.
    Contact your support personnel or package vendor.
    I had this error and i couldn't fix it and i reinstalled the Windows 7 (HP Compaq 610). Than i could install the AnyconnectVPN. Today it tried to update, than i get the same error. Now i can't use it and i can't install it.
    There are a lot of people with this problem but there is no information in internet to fix this problem.
    I really need help. I don't want to reinstall the windows. (It's also not a solution).
    There is a  key (Standart) HKEY_LOCAL_MACHINE/SOFTWARE/..../RUNONCE without a value.
    What should i do now?

    Have you uploaded the AnyConnect package to the vpn gateway yet? I would recommend that you uploaded the latest version: AnyConnect version 2.5.2017.
    Firstly you would need to upload the package to the vpn gateway, and you would need to use the following:
    anyconnect-win-2.5.2017-k9.pkg
    Once you have uploaded the package to the vpn gateway, you can download and install the AnyConnect onto your Windows 7 in 2 ways:
    1) From Windows 7, assuming that the vpn gateway has been configured for AnyConnect, then you can browse to the vpn gateway ip address, and the AnyConnect software will be automatically downloaded and installed on the Windows 7 machine.
    2) Alternatively, you can also pre-install the AnyConnect using the following file:
    anyconnect-win-2.5.2017-pre-deploy-k9.msi
    Hope that helps.

  • Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?

    I'm having problem to install the driver CD, it shows a message saying that occured an error 1722
    A tried to do what you said on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument
    But on step 10, when a I tried to Select the property "Replace permission entries on all child objects with entries shown here that apply to child objects" and aply, the PC showed an error saying that de Registry Editor cannot define the security of that key selected or one of its sub-keys.
    I tried to install after this and showed de 1722 error's message again.
    Solved!
    Go to Solution.

    Have you also tried disabling the anti virus?

  • Flash Player 11.7.700.169 install errors 1722 Action NewCustomAction1

    Hi,
    Yet again on mass deployment of Flash updates we are seeing problems.  We update all Flash agents via SCCM and SCUP and have recently published the 11.7 update.
    A very high proportion of the machines (Windows 7 x64) fail with this in the event viewer:
    Product: Adobe Flash Player 11 ActiveX -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Windows\TEMP\InstallAX_11_7_700_169.exe, command: -install -msi
    You are then left with no version of Flash as it has already removed 11.6.
    Based on previous versions with problems I tried deleting any keys related to Flash from HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products and also all of the "Safe Versions" keys.  Even after doing this the problem still exists.
    Looking for a solid, remote solution as I've got about 8,000 machines to work on.  The relevant parts of the flashinstalllog are below:
    ?=O====== M/11.7.700.169 2013-04-22+08-46-23.494 ========
    0000 [I] 00000010 "C:\Windows\TEMP\InstallAX_11_7_700_169.exe" -install -msi
    0001 [F] 00001041
    =X====== M/11.7.700.169 2013-04-22+08-46-23.852 ========
    2013-4-22+8-46-37.471 [error] 1226 1062
    ?=O====== M/11.7.700.169 2013-04-22+08-46-28.501 ========
    0000 [I] 00000010 "C:\Windows\TEMP\InstallPlugin_11_7_700_169.exe" -install -msi
    0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
    0003 [I] 00000011 1
    0004 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
    0005 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0006 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
    0007 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
    0008 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
    0009 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0010 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0011 [W] 00001036 Software\Opera Software/Plugin Path 2
    0012 [W] 00001036 Software\Opera Software/Plugin Path 2
    0013 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_11_7_700_169.dll
    0014 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_7_700_169_Plugin.exe
    0015 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
    0016 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
    0017 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    0018 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
    0019 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 183
    0020 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerApp.exe 183
    0021 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
    0022 [W] 00001106
    0023 [W] 00001106
    0024 [W] 00001024 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
    0025 [I] 00000012
    =X====== M/11.7.700.169 2013-04-22+08-46-41.948 ========

    Hi,
    For those regarding iSpring user, we spent a lot of time in debugging that too.
    here are the pieces we got and hope it helps.
    The audio would got cut off once you tried to unload as2 swf. According to the SwfLoader doc, it would try to cut off all resources if possible (including audio object...). And it seems that their new flash player 11.7 would try to forcefully clear out stuffs that it shouldn't
    Our hackaround is to call the netstream.seek() to trigger the sound again. Playing sound object doesn't work
    Please adobe!! help us to keep our job here. It would be poor for us by just releasing a player without knowing which part of the backward compatibilities that it is about to break but just post a note on the page to say it may break something old.
    Thanks,
    Venant

  • Error 1722 when installing 1.4.2_02... 1.4.2-b28 cannot be located

    I'm trying to install Java 1.4.2_02 on Windows XP Professional, but half way through I get an error:
    Java Update (1.4.2_02-b3) cannot be installed because the base image 1.4.2-b28 cannot be located.
    This then leads to another popup: "Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected..."
    I've seen that some people have had a similar problem, but not identical to this. I'm installing in the default directory, but still the problem occurs. Any suggestions?

    I found this on the SUN installation notes.
    "Choosing an installation path containing characters that are not part of the system code page - On Windows 2000, XP, and 2003, it is possible to name directories using characters that are not part of the system locale's code page. If such a directory is part of the installation path, then error 1722 occurs, and installation is not completed.
    To prevent this problem, make sure that the user and system locales are identical, and that the installation path only contains characters that are part of the system locale's code page. User and system locales can be set in the Regional Options or Regional Settings control panel.
    The associated bug number is 4895647."
    Cheers
    Neil

  • Failed to install Cisco VPN client 5.0.07.0440 on win 7 64bit [Error 1722]

    Hi Gurus,when I tried to install Cisco VPN Client 5.0.07.0440 on Win 7 64bit, the system would pop up an Error 1722( Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) at the last stage of copying files. Then it would roll back .
    I had tried to clean the temp files, restart windows installer services, and also re-register the MSIEXEC file. However, it would still pop up the error during the installation. For our company, it is a common issue. So, could you please offer me some advice on this?

    Thank you for your reply.
    I had checked the software again and found out.
    1. The MSI installer package is fine, because I can install the software on another PC.
    2. It is not like that, because I can start the installation procedure and run it smoothly until on the 88% of copying files.
    For now, I had only found this issue on one PC.
    Thanks.

Maybe you are looking for