Error: 1759 the selected user has not login any workstation

hi, i got few users always getting the mentioned error message. Can I know that what other troubleshooting i can take besides checking client zam remote services status is started.
I have tried to use zenworks workstation browser to remote user but getting error " no object or network address found" ( but user is connected with lan)
please advise. thanks

You could try this:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Similar Messages

Apple tv error message "the selected video could not be played. the format was not recognized"

my apple tv has started displaying error message "the selected video could not be played. the format was not recognized" on all my movies. i have never had a problem with it before. please help.

Welcome to the Apple Community.
It seems that your Apple TV may be unable to see your movies, where are your movies kept, have you recently moved them, have you done anything else that might be related.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Error message: The message from - has not been downloaded from the server.

"The message from Doug Peets <[email protected]> concerning “Fires” has not been downloaded from the server. You need to take this account online in order to download it."
I get this error message several times per day, even on my Sent mail box, and Drafts, which clearly does not need to be downloaded (does it?). It usually happens when I switch mailboxes, from In to Sent, to Drafts and so on.
I have 100 Gigs of hard drive with 90 Gigs free. I have about 6,700 saved incoming e-mails and 4,700 sent e-mails.
TRhis has only started happening in the last couple months. How do i get rid of it? Is it because i have too many saved e-mails?
When I shut down Mail and re-open it, the messages display properly, but this is a nuisance several times per day.
Thanks,
Doug.

Thanks. I moved half of the messages to a new mailbox "old e-mails", then copied that to a new folder on my desk top, which saved it with a .mbox suffix, then emptied the Old e-mails mailbox in Mail. I will repeat this every three months.
So far, so good.
thanks for your help.
Doug Peets

I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

I have imported a jpeg photo into iPhoto and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
Regards,
Theogt

"The Selected Video could not be played" error after latest software update

After the latest software update for the Apple TV I've come across an interesting problem that's driving me crazy.
In a nutshell:
- I can rent movies and watch them.
- I can watch video podcasts.
- I can watch TV shows purchased on iTunes and streamed from my mac
- I can watch TV shows ripped by myself and streamed from my mac
- I can watch movie trailers
- I can watch YouTube videos
- I can watch a movie purchased on iTunes that has been synched to the Apple TV
- I can watch a movie ripped by myself that has been synched to the Apple TV
- I CANNOT watch a movie purchased on iTunes but it's streamed from my mac
- I CANNOT watch a movie ripped by myself that is streamed from my mac
Whenever I'm trying to watch a movie streamed from the mac I get the following error message:
"The selected video could not be played. The format was not recognized"
These are movies I could watch perfectly well before the software update, and I could perfectly watch them streamed from the mac.
Any clues as to what could be going on? Any help or hits will be greatly appreciated.
Many Thanks,
Julian

I am having similar problems. Rolling Apple TV back to 2.0 fixes it, but then I deal with the 2.0 bugs.
Basically, I've tried this three times so far: reset back to 2.0. Resync everything I can(I have about 500gb of video which is stored on a USB drive, but I selectively sync part of my library and all my music).
I have about 40gb free on the 160gb ATV. Everything plays fine - synched music, synced video, streaming video. My types of video are:
- iTunes purchased
- Ripped using handbrake to h.264 standard stuff (plays fine on my iphone and computer)
- downloaded h.264 "ipod compatible"
- converted video using iSquint
After upgrading to 2.0.2, initially everything plays fine. But the MOMENT I sync something new to the ATV, then it all falls to crap.
- itunes purchases play fine (synced and streamed
- iSquint converted videos play fine when synced, won't stream "The selected video could not be played" bs)
- Handbrake rips can play if sync'ed, won't stream
- downloaded ipod compatible will usually play and sync.
Doesn't matter if they're movies or tv shows.
*All of these played fine before the "upgrade" (some upgrade).* After the upgrade, and after the first post-upgrade sync, it falls apart.
Talking to Apple support about this results in the usual BS. Unplug your ATV. Resync your purchases, We don't support third party software yada yada.
All I know is, Apple broke something with 2.0.2. Either something to do with a USB drive access, or something to do with one of their stupid new flags in quicktime, or whatever. It needs to be fixed.
Going back, once again, to 2.0 until this is recognized and fixed by Apple.
Mark

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

The accounting document has not yet been created Message no. VF062

hiii
Iam getting error in VF02.
Error is The accounting document has not yet been created
Message no. VF062
And where i can do it ?

hi
Go to VF02
Open the billing document
Enviornment -- Acc. determination analysis -- Revenue accounts and see why the accounting document is not generated
Also, from VFX3 and select the document and release the same by clicking on FLAG and then to know the cause of
Error
TO know cause GOTO Tab --- NOTE and u will get the error cause
let us know the cause then only we can be able to tell exact solution if possible.

Error: The system settings do not allow any changes

Hi experts !!,
I had installed SAP NetWeaver 2004s Sneak Preview-ABAP
I am able to create database table using tcode: SE11
but I get an error when I tried to create table entries
Error:
The system settings do not allow any changes
Message no M0421
Diagnosis
The system settings (SE06 and SCC4) are such that you cannot make any changes to this table in this client
Kindly help me to fix this issue !!
Thanks,
Prembabu R

Hi,
I had modified Changes and Transports for Client-Specific Objects
-> Automatic recording of changes (Option-selected)
Now I am able to add new entries to tables.
Thanks for providing valuable information...
~Prembabu

"The selected file does not contain audio media ..."

I'm using Premiere Pro CC in Windows 7. A week ago I created a project using media from an external hard drive. I opened the project today to make changes to it, and a number of the .MTS files show up as missing. When I click on "Link Media" and locate the file -- which shows up as being on the external drive -- I get the following error message: "The selected file does not contain audio media used by clip references in one or more sequences. These audio clip references will be deleted, and cannot be undone. Do you want to continue?" I have canceled out of it because I do not want to damage my project irreparably, but I'm trying to determine the best course of action in re-linking these clips that are essential to the project. (I did apply a Left Fill to all the audio in the project, but I don't know if that would cause a problem, or if it did, how I could remove that effect. I've tried to re-link with several previous autosave versions of the project, only to get the same result.)

Try this:
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

Infopath has encountered an error. The operation failed. Not enough storage is available to process this command

hello,
Using INFO PATH 2013 on Windows 7 64 bit, user is getting the error "Infopath has encountered an error. The operation failed. Not enough storage is available to process this command"
We added the registy IRPStackSize and set it to max 50. This works on my test machine but not this user.
So when using infopath designer 2013, then blank form and data connection, we select Receieve Data-->Sharepoint Library or list and then enter the url to connect to and the user gets the error "Infopath has encountered an error. The operation failed.
Not enough storage is available to process this command"
We use office 365 of course with Sharepoint.
I am able to run infopath 2013 as an admin and I am able to connect fine, but not with his standard profile.
Any ideas, please let me know.
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

side note, i am able to connect on his pc with a standard user account so something with his windows profile that's corrupted, anyone know?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value
from our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciated

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Query to get objects list for which the current user has 'SELECT' privilege

Hi,
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
From these findings, I have composed below query
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
Have I got user's all prvilege details? should I look some other system views?
How to exclude system table privileges details?
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
What about Public role in Oracle? Should I consider public role here?
Oracel Version :11g
I want make this query to work on Oracle 8i or above version
Thanks

>
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
>
You will need a hierarchical query to do that.
Try this script for Listing privileges recursively for Oracle users
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html

Error : Selected user does not exist

I m trying to send the alert messages. And for this I am using message object of DIAPI and sending alert to usercode 'manager' of SAP B1. But i m facing the error that 'Selected user does not exist' and it is present in the OUSR table for the user related details.

Hi, Amit Jadon!
If you send a code snippet, it will be more helpfull for us to solve a problem.
It's my "sending for yourself" example. Log in with a "problem" user and try it:
public void SendMess(string Mess, string Subj)
int errn;
string mes;
SAPbobsCOM.Messages msg;
msg = (SAPbobsCOM.Messages) pCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oMessages); //pCmp - company obj
msg.MessageText = Mess;
msg.Subject = Subj;
msg.Recipients.Add();
msg.Recipients.SetCurrentLine(0);
msg.Recipients.UserCode = pCmp.UserName;
msg.Recipients.NameTo = pCmp.UserName;
msg.Recipients.SendInternal = SAPbobsCOM.BoYesNoEnum.tYES;
msg.Add();
pCmp.GetLastError(out errn, out mes);
if (0 != errn)
    SBOApp.MessageBox("Error in msg.Add(); " + errn + ", " + mes, 1, "Ok", null, null);
HTH,
Alexey

Error: 1759 the selected user has not login any workstation

Similar Messages

Maybe you are looking for