Error 1856 message since upgrading Quicktime Feb 2014.

Tried running as admin as per some forum discussions about this problem but no luck. I haveWindows 7 64bit. The problem only started after I downloaded new version of Quicktime in February 2014.

I have the same exact problem since the update.
The problem seems to come from Quicktime itself as I can open .mov files in other players. Tried re-installing it, even cleaned cache and temp files in between. Running as admin has not helped.
Hope this gets an awnser soon.

Similar Messages

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

Bad renders in Windows since upgrade to CC 2014

Ever since upgrading to the newest version of CC 2014, Premiere Pro is having issues rendering video segments with noisy black horizontal line noise.
Still images render fine, but any P2 footage renders badly. It reminds me of the way footage used to look if viewed through a monitor that had ground loop problems, (Which this system definitely does not!). It only occurs in my P2 footage shot with the HVX-200, 720p24fps, which rendered pristinely in the older CC version. I am on a Windows 7 machine with approved Nvidia card built especially for the Adobe CC suite by Safe Harbor, have very fast Raid arrays and plenty of Ram etc., and the only video effect applied is the "lighting" effect, one native to the program and not a third party one, so I attribute these glitchy renders to the new release code. Anyone else seeing this problem??

I don't have any of that media to test with. If you care to shoot two or three minutes of junk footage and zip up the card, I can test it here.
Mobile DepositFiles

Since upgrade Quicktime won't play ".qtl" files

I got the notice a few months ago that I needed to upgrade Quicktime, so I did and am now running it at 7.1.6. However, since the upgrade, I can't play any of Quicktime's HD trailers or any movie files ending in ".qtl". ".mov", ".mp4" and others work fine, just not ".qtl". Also, every time I try to play a trailer from Apple's QT Trailer page, the page just uploads with "?" over the QT icon. Whether I'm trying to play a HD trailer or not, the result is the same. Any ideas?

The Yahoo pages make for lousy viewing. The SD files have been converted to Flash Video (.flv) and the HD versions use the QuickTime Media Link format.
I tested the Silver Surfer pages and had mixed results. The "exclusive" version .qtl file worked (after closing the first window opened and a double click on the downloaded .qtl file). The "Theatrical Trailer" HD versions failed to load any content.
The .qtl files are just simple text files (XML) and you can view them in any text editor to extract the "real" URL to the media. Copy all of the text in the quote marks and you'll get a URL that looks like this:
http://playlist.yahoo.com/makeplaylist.dll?sid=37986432&embedded=yes&t=mov&br=27 00&s=0&start=0&end=&afr=0&nodeid=2964002&d=35&tz=&pg=NTYzMDg4MDQ1NDY2YzkwMG&auth id=&sl=35&so=%252FYahoo%252FMovies%252FClips%252FFantastic%2BFour%2BRise%2BOf%2B The%2BSilver%2BSurfer%252Fwheelsequence%2528HD%2529&tcode=&sdm=web&pt=rd
Sorry for the huge URL. Blame it on Yahoo. (Copy do not click all of the text above)
Paste that in the Open URL feature of QuickTime Player and wait for the file to download.

Error message since upgrading iTunes

I recently upgraded to iTunes v7.1.1.5 and have since been getting an error message that states "RTHDCPL.EXE Illegal System DLL Relocation". I am running an HP Media Center PC with Windows XP Media Edition. Any advice on how to fix this error?

Hi, Peter8251.
I don't have any first hand knowledge of this problem but a quick Google Search suggests that it is not at all connected with your recent upgrade to iTunes 7.1.1.5.
There are a number of suggestions offered but if I were in your situation, the first thing I'd try is downloading and installing this MicroSoft Update .

Why suddenly all these Java error messages since upgrading to Lion?

Since I upgraded to OSX 10.8.2, suddenly I'm having no end of error messages having to do with Java not running—everything from coupon printer plug-in to online games not functioning anymore. All of these worked fine in 10.7.4. Is there a fix?

Since it is such a seething whole of exploits, Apple has disabled Java by default, both the JRE and the Web Applet launcher in Safari.
If you try to run a Java application, it will ask if you want to install it.
If you're just using web applets, you won't get asked. So, open Java Preferences which is in the /Applications/Utilities folder. It will ask if you want to install Java.
Then, open Safari preferences, Security tab, and enable Java.

HT1926 Error message when upgrading QuickTime.

I keep getting the error message "QuickTime has an invalid signature. The download has been removed" when I start the upgrade process. Anybody else seen this? What should I do to fix this?
Thanks, Barry.

Try updating using a QuickTimeInstaller.exe installer file downloaded from the Apple website:
http://www.apple.com/quicktime/download/

Dyld Error Message since upgrade

Hi,
Upgraded to SL. Mostly OK, but some applications (Apple Motion, Compressor, Aperture) all crash with same message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Well, its right. The image is not there. But presumably it was before upgrading. Anyone know a simple way to fix this?
Thanks,
Dan

What versions of these programs do you have?
Also, can you post the whole crash log here?
In your home folder, Library/Logs/DiagnosticReports/

DVDAE error message, since upgrade to DVDSP4

Hi,
I just checked my projects for errors with the Demo version of DVDAfteredit. There I got the following errormessage for all projects i builded with DVD_SP 4:
#PGC Command Errors
#PreCommands from "Subpic-mapping»Video Title Sets»VTS 1»VTSM 1 Menus»Deutsch»VTSM PGC 59"
12: GoTo Line 15
* Line value too large. Only 14 instruction lines in Pre-Command Area.
The error occurs on 7-8 different PGCs aleways in this VTS.
I didnt had this error on projects build with DVD SP 3.
As i see, DVD SP internal scripting is building a "goto" command that is jumping behind the last line.
As i dont understand the whole script, i dont know when this wrong goto command might be executed and how to correct this.
I believe a cheap programmed Player may fail when it comes to this command.
Can someone confirm this error, or better direct me to a solution?
As i have DLT deadline in 2 days im a bit frightened about that thing. (I dont want to think about the yet replicated discs...)
Thanks,
Matthes

Thanks Matthes,
I agree with Aldershot. It sounds to me like it is just a DVDSP issue. I wanted to know if myDVDEDit agreed with DVDAE, and it does, so that clearly rules out any mistake that might have been made by DVDAE. In essence, you got a second opinion, and they both agree.
Sounds like something in the project upgrade, or just the build got lost.
What does the script mean, is another question. The GoTo command is a way of nesting multiple command strings within the same script.
For example:
If r0==1 Goto10
If r0==2 Goto20
Now, I might have two somewhat unique scripts that start on line 10 and on line 20, and I don't want to execute both of them, just one of them. So I create a condition based on a register value that will execute either one of these two scripts based on the value of register 0, aka r0.
GoTo is actually a command you can learn, and use within DVDSP's own scripting capabilities. So it's actually in your user manual as well. Many spec commands do not exist in Apple's DVDSP script IDE, but Goto does exist there. As you learn to script, you will sometimes run into a situation where one set of script commands doesn't actually perform the duty you would like. You will create an IF THEN approach, and that is what Goto offers. It allows me to split a script in multiple scripts, all within the same larger script.
That's a bit abstract to think about, but I hope it makes some sense.

Since upgrade to CC 2014 Saving size has changed.

When I was working in Photoshop before my upgrade to 2014, I would resize my projects to 2 X 2 at 300dpi, and 9 or 10 and it would save it around 240K or slightly higher. All of a sudden it's saving it as 1.0M instead. I can't load this size into my store. I have no clue what happened, as I have not changed a single thing that I do. My original 12 X 12 files that it starts out as has changed to. Please help. No clue what the heck happened.

jahmanrv wrote:
All of a sudden it's saving it as 1.0M instead. I can't load this size into my store. I have no clue what happened, as I have not changed a single thing that I do. My original 12 X 12 files that it starts out as has changed to. Please help. No clue what the heck happened.
JPEG format uses lossy compression and the file size is highly dependent on the image content. It sounds like you are using JPEG original files since both the original and resized JPEG export files are larger. Images with more detail will have larger file sizes at the same quality setting. Here are some good examples:
http://regex.info/blog/lightroom-goodies/jpeg-quality
In addition images shot at high ISO camera setting that have visible noise will inflate the file size. Use PS/ACR or LR's Noise Reduction tools to reduce the visible noise when viewed at 1:1 Zoom. This will help prevent the noise from inflating the Exported JPEG file size.

[nvidia] graphics errors in games since upgrade of 03/12/08

Hi,
since I did a "pacman -Syu" on 03/12/08, I have problems with the graphics of sdl/open gl games, e.g. urban terror and unreal tournament. There are graphical errors (textures are missing or have the wrong color) and the games are very unstable, hang very often, have low frame rates.
The last "pacman -Syu" was on 03/02/08, so the "bad" new package must have been released in this time. Only nvidia cards are affected, because my laptop with intel chip has no problems, though I also did a "pacman -Syu" on it. I could not solve the problem by changing the available settings in nvidia-settings. Even disabling the composite and renderaccel options in xorg.conf did not help. But I could solve the visual problems by upgrading xorg-server to 1.4.0.90-7 (testing). The current one is 1.4.0.90-6. However, the games are still very unstable, which is a even bigger problem that the visual issues. I also tried out the new beta nvidia driver (171.06), but it didn't help at all.
Best regards,
Thorsten
P.S.: hardware is GF6600GT

here ya go:
first the kernel module:
# $Id: PKGBUILD,v 1.87 2008/02/27 08:20:11 thomas Exp $
# Maintainer : Thomas Baechler <[email protected]>
pkgname=nvidia
pkgver=100.14.19
_kernver='2.6.24-ARCH'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.24-2' 'kernel26<=2.6.25-0' 'nvidia-utils')
conflicts=('nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
license=('custom')
install=nvidia.install
source=(http://us.download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run)
build()
# Extract
cd $startdir/src/
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
# Any extra patches are applied in here...
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module
# install kernel module
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
and nvidia-utils:
# $Id: PKGBUILD,v 1.31 2008/02/27 08:17:30 thomas Exp $
# Maintainer: Thomas Baechler <[email protected]>
# Contributor: James Rayner <[email protected]>
pkgname=nvidia-utils
pkgver=100.14.19
pkgrel=1
pkgdesc="NVIDIA drivers utilities and libraries."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('xorg-server')
conflicts=('libgl' 'libgl-dri' 'ati-fglrx-utils' 'nvidia-legacy-utils' \
'nvidia-71xx-utils' 'nvidia-96xx-utils')
provides=('libgl')
license=('custom')
install=nvidia.install
source=(http://us.download.nvidia.com/XFree86/Linux-${ARCH}/${pkgver}/NVIDIA-Linux-${ARCH}-${pkgver}-pkg0.run \
supported-cards.txt)
options=(docs !strip)
build()
# override nvida install routine and do it the long way.
cd $startdir/src/
sh NVIDIA-Linux-${ARCH}-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-${ARCH}-${pkgver}-pkg0/usr/
mkdir -p $startdir/pkg/usr/{lib,bin,share/applications,share/pixmaps,man/man1}
mkdir -p $startdir/pkg/usr/lib/xorg/modules/{extensions,drivers}
mkdir -p $startdir/pkg/usr/share/licenses/nvidia/
install lib/{libGLcore,libGL,libnvidia-cfg,tls/libnvidia-tls}.so.${pkgver} \
$startdir/pkg/usr/lib/ || return 1
install -m644 share/man/man1/* $startdir/pkg/usr/man/man1/ || return 1
rm $startdir/pkg/usr/man/man1/nvidia-installer.1.gz || return 1
install X11R6/lib/libXv* $startdir/pkg/usr/lib/ || return 1
install -m644 share/applications/nvidia-settings.desktop $startdir/pkg/usr/share/applications/ || return 1
# fix nvidia .desktop file
sed -e 's:__UTILS_PATH__:/usr/bin:' -e 's:__PIXMAP_PATH__:/usr/share/pixmaps:' -i $startdir/pkg/usr/share/applications/nvidia-settings.desktop
install -m644 share/pixmaps/nvidia-settings.png $startdir/pkg/usr/share/pixmaps/ || return 1
install X11R6/lib/modules/libnvidia-wfb.so.$pkgver $startdir/pkg/usr/lib/xorg/modules || return 1
install X11R6/lib/modules/drivers/nvidia_drv.so $startdir/pkg/usr/lib/xorg/modules/drivers || return 1
install X11R6/lib/modules/extensions/libglx.so.$pkgver $startdir/pkg/usr/lib/xorg/modules/extensions || return 1
install -m755 bin/nvidia-{settings,xconfig,bug-report.sh} $startdir/pkg/usr/bin/ || return 1
cd $startdir/pkg/usr/lib/
ln -s libGL.so.$pkgver libGL.so || return 1
ln -s libGL.so.$pkgver libGL.so.1 || return 1
ln -s libGLcore.so.$pkgver libGLcore.so.1 || return 1
ln -s libnvidia-cfg.so.$pkgver libnvidia-cfg.so.1 || return 1
ln -s libnvidia-tls.so.$pkgver libnvidia-tls.so.1 || return 1
ln -s libcuda.so.$pkgver libcuda.so.1 || return 1
ln -s libXvMCNVIDIA.so.$pkgver libXvMCNVIDIA_dynamic.so.1 || return 1
cd $startdir/pkg/usr/lib/xorg/modules/extensions
ln -s libglx.so.$pkgver libglx.so || return 1
install -m644 $startdir/src/NVIDIA-Linux-${ARCH}-${pkgver}-pkg0/LICENSE $startdir/pkg/usr/share/licenses/nvidia/ || return 1
ln -s nvidia $startdir/pkg/usr/share/licenses/nvidia-utils || return 1
install -D -m644 $startdir/src/NVIDIA-Linux-${ARCH}-${pkgver}-pkg0/usr/share/doc/README.txt $startdir/pkg/usr/share/doc/nvidia/README || return 1
install -D -m644 $startdir/src/supported-cards.txt $startdir/pkg/usr/share/doc/nvidia/supported-cards.txt || return 1
find $startdir/pkg/usr -type d -exec chmod 755 {} \;
# phew :)
PS: I removed the mdsums as i am on i686 and i don't have the "sources" for x86_64. These are edited 169.12 PKGBUILDs

Grey blank page for some messages since upgrading to mountain lion

Just upgraded several days ago from Snow Leopard to Mountain Lion (10.8.3) and I have notice that some email messages (Apple Mail) I only get a blank grey page. I know I have a lot of messages in my mail account and wonder if that might be the problem. Any help would be appreciated.
Jerry

I tried rebuild but it did not help. I still have a grey empty page on some messages. They usually part of a conversation, I tried to uncheck the "organize by conversation" but I still randomly have that problem. Sometimes if I quit and reopen Mail it goes away but other times it doesn't. Is it possible that having a large number of messages in the inbox might be responsible?

Since upgrading quicktime to 7 its not working

I,ve tried the 6.5.2 re-0intsaller but that says " you do not have suitable software installed on ur mac' I have also tried the 7.02 to 7.01 installer as well with the same issue.
What are proper pain in the arse. Common Apple ! ive nor got time to waste ******* about with this ***** !!!!!!!

Qt 7.03 is not running at all Quicktimekirk. When i click on the icon quicktime will not start up. previous versions ran no problem. Its since the most recent update that this issue appeared. No other software has been installed.
In essence quicktime is totally dead.
It seems Apples updater has a flaw somewhere.
The reason for my frustration Quicktimekirk is that after nine years of mac and a fair amount of expense some workgroup or person at Apple is eating into my precious time - time which is coming to an end at exactly 56 hrs from now as i set off on another 4-5 week engineering contract away from my family and friends hundreds of miles away. I am simply trying to download some BBC Radio 1 essential mixes to update my newly purchased 5g video ipod before i go and sit in a hotel for 5 weeks. And without quicktime running using internet explorer it wont work ! In the meantime i am tending to my 10 month baby daughter looking after my 3 month pregnant partner who has heavy pregnancy sickness keeping track of my 11 year old step daughter servicing and repairing a saab and a peugoet , making sure that everything is safe and working and all stocks and supplies are present and correct in our 1920's house we moved into a month and a half ago. Oh and doing someone's job ay Apple buying trying to figure out what **** is going on with quicktime- (which was pro registerd before the update and i don't know where my serial number is) --- Bang goes having some home video on my 5g ipod which will help me to remind myself why i,m sacrificing 12 hrs 7 days a week 4-5 weeks with one weekend off fixing and evaluating the machines which supply the electricity that apple so dearly require to survive for.
I feel better for writing that Quicktimekirk.
But now can you help me.
please !

Cant import Mailboxes and Messages since upgrading to Tiger

I exported all my mailboxes and messages in Mail under Panther. I then did a clean install of Tiger erasing the HD. If I import mailboxes from Mac OSX, then it doesn;t import anything. If I import mailboxes from "other" then it imports the empty mailboxes, but there are no messages inside. Rebuild is grayed out in the Mailbox menu, so that isn't an option. I have tried manually copying the mailbox folders, but to no avail.

I just had the same problem.
Trying to upgrade my G3 iBook from 10.2.8 to Tiger was a disaster (currently in the shop), so the long awaited new computer purchase happened a bit early. I have a firewire drive backup of my entire "house" profile, including the library, with all my mailboxes under the "Mail" folder.
Started my new G5 iMac, opened Mail 2.0.5, got it working, and then attempted the import function, going to the "Mail" folder on my external firewire drive. It imported about half of the folders, and nothing is in them (the older version of mail is whatever was last supported by 10.2.8).
When import didn't work, I tried to manually copy the mailboxes from the external firewire drive into the Mail directory - best I got was the same result - not all folders, and what I got was empty.
What's the deal? I expected Apple products to have trouble reading MS stuff, but I can't read email from an older version of Apple's Mail?
Please help... seems to be a common problem, but no answer.
- Jeff

No sound alerts for messages or phone calls since upgrade

I too had no sound alerts for calls or messages since upgrading but then I discovered that the 'Do Not Disturb' option had been somehow switched on after I upgraded. If you have a moon icon at top corner of your screen that's what's happened. You need to go into Settings>DoNotDisturb and switch it off. It worked for me so hope it helps someone else.

Look in the Notifications settings to see if the update turned them off there. If they are turned on and you are still not getting alers on the lock screen, reset your phone. Hold down Home and Power buttons at the same time, wait for Apple logo to appear and wait for the phone to reboot itself.
See if you get alerts with the phone locked. If you still don't get alerts, do a Reset Network Settings reset, Settings => General => Reset => Reset Network Settings. You will have to re-enter your wifi passwords.
If this doesn't help do a Reset All Settings reset. You won't lose any data or content , but the settings on the phone will all be reset to factory defaults and you will need to go in and turn the things you turned on and off on and off again.

Error 1856 message since upgrading Quicktime Feb 2014.

Similar Messages

Maybe you are looking for