Error 1901. Error attempting to read from the source installation database

OS: Windows 7 Enterprise 64-bit
Browsers: IE 9 and Firefox 10
Flash Version 11.7.700.169
I'm logged in as Administrator. I'm trying to install using this:
start "" /wait msiexec /i install_flash_player_11_active_x.msi /qb
and
start "" /wait msiexec /i install_flash_player_11_plugin.msi /qb
Both commands result in:
Error 1901. Error attempting to read from the source installation database: C:\Windows\Installer\3c0cc1.msi
(the file name seems to be random)
echo %errorlevel% returns 1603.
Help.

Not sure how much I can help you with this. Error 1603 usually indicates that the installer cannot proceed because something is in use; search this page for 1603: http://msdn.microsoft.com/en-us/library/windows/desktop/aa372835%28v=vs.85%29.aspx

Similar Messages

Error attempting to read from the source install database: C:\WINDOWS\Installer\e2120a.msi?

I have had itunes before but now its not working. I've tried many times to fix this problem but i none work. I also got a error 7 (Windows error 999) but now not anymore hopefully. I really need help on this problem. (If this helps, Before i was updating itunes and my computer froze so i turn it off and that was when everything went crazy).

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msi

All sorted now just needed to repair itunes from control panel

While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes. Can anybody help me to resolve this issue?

You can try disabling the computer's antivirus and firewall during the download the iTunes installation
Also try posting in the iTunes forum since it is not an iPod touch problem.

Trying to update to iTunes 10.4.1 and I get a message "A network error occured while attempting to read from the file C:|Windows|Installer|iTunes.msi" Running WIndows 7 with all updates done. I have never had an issue with iTunes updating before. Anyo

iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to update iTunes but get this box message comes up, "Network error occurred while attempting to read from the file: c:/windows/installer/itunes.msi" I have be told to uninstall all iTunes then reinstall, if I do this will I lose my Library

Looking on the net to solve this problem, it says
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
I have save all my iTunes on a CD.
If I uninstall iTunes, will I lose my iTunes library and video and apps and inturn will I lose this off my phone..
I have tryed to update my iPhone firmware as they said there is a new update firmware, it would not install this and put my phone into recovery mode and I had to use iPhone recovery fix to get it out of recovery mode, my iPhone did a back-up before it tried to update the firmware.
Any idea's are welcome

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Encore CS4 error "could not read from the source file"

- Source File: C:\Users\Anil\AppData\Local\Temp\2013 11 08 c Big Budha_9.prproj
- Output File: F:\Adobe Encoded Blu-ray\For Disk #013\Disk#013-B\2013 11 08 c Big Budha.m2v
- Preset Used: Full HD 1080i [MPEG] 30 MBPS
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:49:53
25-Jan-14 2:50:32 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
i have tried creaeted a NEW Premiere Pro project and still get the same error again ... can someone help me to figure out what is wrong ...

Hi Neil
I have been using file names with spaces and it has been working fine. As stated in reply to Jones, uninstall and reinstall of Premiere Pro CS4 has helped to get rid of this error.
also i did not use Dynamic link, but was trying to create MPEG file using Media Encoder and then import it in Encore.
your suggestion for H264 seems good and will try it.
x264 Pro is for CS5 and above versions, so it seems i can not use it and have to manage with Adobe Media Encoder's default. Hope i will not have any major technical issues.
please suggest me for below:-
1) i have 4 hours of Full HD footage and made 1080i MPEG2 files of 30mbps to fit in 2 seperate Bluray Disks.
2) now i plan to put all in one Single Bluray Disk by reducing MPEG2 file average data rate to 15mbps. will that work or is there any limitation of time in Bluray Disk.
3) Will it be ok to create H264 files at 30mbps [as you mentioned H264 reduces file size to half of MPEG] and still be able to fit 4 hours footage in one BR Disk ?
4) even though i specify Min 10 Target 25 Max 30 data rate for MPEG files creation, it creats file at data rate of 30 mbps, can you explain why it is happening as i thought my target rate should be 25 mbps and not the maximum rate specified.
Thanks ...
PS...
my source file is .mov 1920 x 1080i 29.97 fps from Canon 6D. first i tried to create progressive file in Encoder but while imported in Encore realised at 29.97 fps, it allows only interlaced file and had to transcode back to interlaced. so i stick to interlaced file.
Canon 6D also allows me to shoot in 24fps [motion movie] which Encore can handle as progressive file for authoring. What are the pro and cons of shooting in 24fps, if you can suggest.
Message was edited by: AnilHVarma

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Installed CS5, now can't export from CS4! Help! "Could not read from the source..."

I installed CS5 but completely ignored the fact plugins were required to be 64-bit. It'll be months before the plugins I require for my projects to be updated!
So I continued editing in CS4 and when I attempted to export with the media encoder it halts instantly with an exclamation mark, the log says :
"Could not read from the source. Please check if it has moved or been deleted."
And yes I'm not stupid, I did my research.
I tried uninstalling CS4 and reinstalling. I tried the shortcut fix. I tried moving my cache files. My extensions are correct.
Right now the only fix seems to be completely removing CS5 and CS4, After Effects just because they share files (?) and all my settings and plugins along with it! I'd rather NOT do that if I can!

Good detective work, and glad that it worked. Now, your cure will be here for us to link to and for others to find. Your title will help direct others to this thread. Job well done.
Thanks,
Hunt

Error 1901. Error attempting to read from the source installation database

Similar Messages

Maybe you are looking for