Error 1904 during install of Crystal Reports 2008 SP3 - Windows 7 (32-bit)

Get the following error during installation:
Error 1904:
Module
c:\program files\business objects\common\4.0\crystal reportviewers12\activexcontrols\cselexpt.ocx failed to register.
HRESUL - 2147010895

Hi,
Try the suggestion provided in this Microsoft article 237294 and see if this helps you or not.
Here is the link:
http://support.microsoft.com/kb/237294
Thanks,
Kuldeep

Similar Messages

Unable to Install Crystal Reports 2008 on Windows 7 64 bit

Hi,
I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
BR, Nanda Kishore

i INSTALLED NOW

Failed to Install the Crystal Reports 2008

Post Author: cechow
CA Forum: Crystal Reports
Hi,
I am facing some error message when installing the Crystal Reports 2008 that I have purchased. I am currently working on a Windows XP Pro SP2, 1 GB RAM, 60 GD Free Space to install the Crystal Reports but failed. The error stated on the Crystal Reports installation screen is "Crystal Reports 2008 Setup has Failed".
Thanks.
Adrian

Post Author: cechow
CA Forum: Crystal Reports
Basic Template
Product: Crystal Report 2008
Version:
Patches Applied: I'm not sure what patches need to be installed
Operating System(s): Windows XP Professional SP2
Database(s): SQL Server 2000 sp3a
Error Messages: Failed to INstall the Crystal Reports 2008.Steps to Reproduce: When I entered the CR disc in the CD ROM, there was no auto-run, then i decided to browse into the CD and execute the Setup.exe which then prompt the error above. Please advise.Is there some Pre-requisites that I need to install, any JRE or some other application?

Error while trying to install Crystal Reports 2008 SP3

Has anyone else come across this error before when running the SP3 update installer;
Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
The installation then terminates. There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
ANY help appreciated
Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

Priyanka,
I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation. Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
Regards.

Crystal reports 2008 sp3 : An error has occurred while attempting to load t

Hello,
Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it. If there is a better forum for this question, please let me know or feel free to move it.
We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
Our Environment:
Development Computer (32-bit, WinXP)
VS2008 (fully updated, was not installed with its Crystal Reports feature)
Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
Database Server (64-bit)
"SERVER2" is a Microsoft SQL Server 2008 server, fully updated
Web Server (64-bit)
"SERVER3" is a Microsoft Server 2008 R2 Web server.
We have an application that is installed on the Web server and it pulls data from the database server.
The webpages are accessing the database properly. There is a ShowReport.aspx webpage that has the
CrystalReportsViewer on it. We send parameters and logon information to ShowReport.aspx. ShowReport
works properly on our development computer and the report looks good, but it fails on the web server.
We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
Our application pool on the web server for this application is set to 32-bit mode. When I launch the
application, it works properly with the database and displays data on web pages, but when I try to
view a report on ShowReport, I get the following error message:
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required.
According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed. They are both Crystal Reports 2008 and not .NET. CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3. On our development computer, .ENGINE is 12.0.2000.0 and
the same version is on the web server.
So, I am completely at a loss as to why we are encountering this error. Help, Please!!!
Thank you in advance,
Mike

Hi Mike,
Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
Thank you
Don

Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

Hello,
My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports. As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
The issue is that the runtime engine incorrectly returns the report selection formula. I have included sample code showing what I mean.
To reproduce;
1. Create a simple report that has a date range filter like:
({Orders.Order_Date} >= {?START_DATE})
AND ({Orders.Order_Date} <= {?END_DATE})
2. Create a test app as follow that loads a report using the following code:
ReportDocument rpt = null;
try
rpt = new ReportDocument();
rpt.Load("TestReport.rpt");
this.txtMessage.Text = string.Format(
    "ReportSelectionFormula:{0}{1}",
     Environment.NewLine,
rpt.RecordSelectionFormula);
catch (Exception ex)
this.txtMessage.Text = ex.ToString();
3. Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
4. Execute the app.
At this stage, the screen shows
ReportSelectionFormula:
(   ( NOT {Orders.Order_Date} >= {?START_DATE} )   AND   ( NOT {Orders.Order_Date} <= {?END_DATE} )   )
The expected value is:
ReportSelectionFormula:
(   ( {Orders.Order_Date} >= {?START_DATE} )   AND   ( {Orders.Order_Date} <= {?END_DATE} )   )
If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected.
Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack? Is there a Fix Pack expected to be released soon? It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
Thank you.
-Carlos.

Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

Hi Guys,
here i'm again.
Well I'm developing on a 32-Bit OS with Crystal Reports 2008. I've deployed my solution to SharePoint, but when i try to call a report in the aspx-Website i get the following error:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Here are the technical details:
- Windows Server 2008 (64Bit)
- IIS7
- Microsoft Office Server 2008 (64Bit)
- Crystal Reports 2008 SP3
I've read, that there isn't a 64-Bit runtime version of CR2008. Then i tryed the two following suggestions i found in this forum:
1. Try to run the IIS-Application-Pool in 32-Bit-Mode -> This don't work, because SharePoint then throws a "Internal Server Error - Code 500" (no SharePoint Sites are available).
2. Try to compile the Visual Studio Project as 32-Bit -> This don't work, because SharePoint could not load the assembly
Well, are there any other hints, suggestions or experiences how i could get this to work?
Thanks in advance,
Christian
Edited by: C.Kaiser on Oct 12, 2010 5:22 PM

Hi,
I Have a Doubt Similarly which is related to the above post.....
I had created a asp.net website with sql db, Its running fine in my PC, But when i host it in my server It shows an Error like..
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Design, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "
I am Using Visual Studio 2010, and my Server is Windows Server 2008 R2 32bit
I am also attaching the screenshot of the error.
Can anyone Please Help me , Its Very urgent..
Anyone Please Help Me ,,,, Its Very Urgent .......
Thanks In Advance...

Deploy Crystal Reports 2008, VS2008, Windows Server 2008

Hi All,
I'm looking for guidance on how to deploy a web application developed on VS2008 - I've installed Crystal Reports 2008 (trial version). So in affect crystal reports is integrated in the web app.
So now I want to deploy to our web server to complete the POC.
I've no idea what I need to do to deploy. I installed my trial version of CR2008 on our server and moved the web app onto it as well. Web App running fine under IIS7. I've added the folowing to my web.config
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Is this the correct way to deploy?
I am getting the following error .... any help much appreciated
Regards,
Sinead
Server Error in '/' Application.
Invalid file name.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Invalid file name.
Source Error:
Line 30:             }
Line 31:
Line 32:             repDoc.Load(Server.MapPath("") + "
DailyNumbers.rpt");
Line 33:             CrystalReportViewer1.ReportSource = repDoc;
Line 34:             ParameterFieldDefinitions crParameterFieldDefinitions;
Source File: c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs    Line: 32
Stack Trace:
[COMException (0x800001fb): Invalid file name.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +419
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +894
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
   WFDailyNumbers.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs:32
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627

I downloaded Crystal Reports 2008 - Service Pack 3 Full Build - that wouldn't install
Downloaded Crystal Reports 2008 - Service Pack 3 - which installed successfully.
I now have ....
Crystal Reports 2008 Runtime SP2
Crystal Reports 2008 SP2
Crystal Reports 2008 SP3 Update
I found another thread similar to the error I am getting which recommended adding Everyone to the Permissions on the C:\Windows\Temp folder. With this set, when I try to navigate to the report on the web app I don't get the error as before - but the application just sits there and spins it wheels and nothing happens. When I take off this permission I am back to the previous error.
Theres nothing revealing in the eventlogs that I can see.
Do you think this could be down to IIS just not knowing what to do with a .rpt file?
In the web.config
<httpHandlers>
<add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</httpHandlers>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
</handlers>
Regards,
Sinead

Crystal Report 2008 SP3 and BO XI 3.1 conflict

Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______T

Hi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts

Crystal Reports 2008 in Windows Vista x64 + IIS7 DOESNT WORK!!!!!! HELP!

Hi,
I´m developing an application with Microsoft Visual Studio 2008 and Crystal Reports 2008 Professional
(i´m not using the Crystal Reports 2008 for .Net basic)
As I have Windows Vista x64, my ASP.NET applications run under IIS7, but for my surprise, Crystal doesn´t work under Vista x64 + IIS7. I got the following error:
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
When I run the same routine in an Windows Application the error doesnt occur. It only happens under Web Applications.
I tested in a Windows Vista 32 bit and there´s no error....
Crystal Reports 2008 does not work in II7 x64 ?
Is there any solution?
Please.... help me!!!!!

Hi Fernando,
Please read and follow the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for future topic posts as yours violates the current policy.
You will need to build your application to run in 32 bit only mode. This note explains how to do it:
[Set app to 32 bit mode|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Jason

Crystal report 2008 SP3 Ver 12.3.1.684 application crash on runtime

hi all ...
i have problem running my report using crystal crystal report 2008 SP3 Ver 12.3.1.684 .. it stop responding while i click preview the report ... and my report is connect to ODBC database source provider.. the crystal report will crash while connect using ODBC(RDO) but other than that all work fine ...
here is the error log while try run the report ..thx and pls help as i am no idea for this .. and this report is come one of my SOLOMON SL 2011 while i want to edit my existing crystal report
Description:
Stopped working
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     crw32.exe
Application Version:     12.3.1.684
Application Timestamp:     4c3ddcf1
Fault Module Name:     ntdll.dll
Fault Module Version:     6.1.7601.17514
Fault Module Timestamp:     4ce7ba58
Exception Code:     c0000005
Exception Offset:     0002e3fb
OS Version:     6.1.7601.2.1.0.16.7
Locale ID:     1033

I have about the exact same error and it happens when I hit refresh to update the records. When I go into the Formula Workshop, there is nothing in Report Custom Function. Can you give me a little more detail on how you fixed the problem.
Thanks.

Crystal Reports 2008 SP3 Additional parameter values are needed

I recently upgraded to Crystal Reports 2008 SP3, and now when I try an export a report from the Crystal Reports Designer, I get the error "Additional parameter values are needed before this report can be saved or viewed with data. Click 'Ok' to enter the missing values or 'Cancel' to proceed without data". I am trying to export the report to Crystal Reports format. The report is getting data from a MS SQL 2005 stored proc. I tried building a new simple report (just took all the fields in the result set and put them in the details section) using the same stored proc, and get the same error when I try to export.
FYI, before I try to export I always preview the data in the report, so the parameters are defiantly set correctly.
This was working correctly in Crystal Reports 2008 SP2.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Landscape Problems with Crystal Reports 2008 SP3

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

Crystal Reports 2008 on Windows 7

I have a client running Crystal Reports 2008 in a Windows 7 environment. The client states that when printing Crystal Reports, they will only print to his local printer, to the bypass tray. The client states that when changing the printer to any other network printer, the Crystal Reports will not print. The client also states that printing from other applications, such as his accounting software (Peachtree), Open Office, e-mail, etc. he is able to print to any printer without problems. Does anyone know if there are any outstanding problems with running Crystal Reports 2008 in a Windows 7 environment, or has anyone heard of this type of issue before?
Thank you,
Tammi

Thank you, Don. I have not verified if the client has downloaded and installed the Crystal Reports 2008 SP2 update yet or not, nor do I know which SP of Windows 7 they are running. I will forward this information to their IT person and have them confirm this for me.
To answer your other questions, I had disassociated the printer with the reports (we also check the NO PRINTER box before saving the reports). The client claims that the printing does not work in either the Crystal Reports Viewer, nor through the Designer. They are using this as a locally installed application (Windows not Web).
Thank you again for your suggestions. I will get them implemented right away, if they have not been.
Best regards,
Tammi

Crystal Reports 2008 SP3 - "u25azalea.dll" missing

We have installed Crystal Reports 2008 SP3 on our application server.
Windows Server 2008 R2 Standard
64-bit operating system
1. I create a Report and choose a field for barcode
2. Right-click on a that field and choose u201CChange to barcodeu201D
3. I choose "Code39" in the list
4. I change the font of the field to "Barcode EAN13"
5. It shows correctly in Crystal design/preview mode.
6. When I try to run the report from our windows application this message appear: "UFL 'u25azalea.dll' that implements this function is missing"
7. I download the file from http://www.azalea.com/crystal-reports/
8. I copy the file "u25azalea.dll" into the path: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
8. It still shows the message!
What should I do?

Hello,
No need to select #3 if you are going to change it to #4. Just edit the field and select your barcode font. You only need that file if you use the Code 39 font.
Odd though that it asked for that ufl. Look for it on your local PC and copy it over, could be the one you downloaded is an older version.
Don

Error 1904 during install of Crystal Reports 2008 SP3 - Windows 7 (32-bit)

Similar Messages

Maybe you are looking for