Error 1905 and quicktime doesn't seem to actually exist on my computer

Everytime I try to install quicktime I get the 1905 error can't unregister message and the hkey error message. So I figure I'll just uninstall Quicktime and start fresh. Problems: 1 There is no uninstall option in the Quicktime folder. 2 When i try to do the uninstall from the start menu it does nothing. 3 I tried uninstaling from the control panel>add remove programs, but Quicktime isn't even listed. There is nothign in the system32 file either. It is in Program files though. How do i get rid of it and install the new version I can use itunes.
Why does this have to be so complicated? and why couldn't my girlfriend have gotten some easy to use mp3 player? you don't have to answer that.

On a windows computer go with Limewire Pro and Winamp, or start going though a search of the QT forum, here's a start
http://discussions.apple.com/thread.jspa?threadID=725868&tstart=0

Similar Messages

I tried to manually clear my Time Machine back up drive (a La Cie). But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - how do I get rid of them now in a quicker way?

I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?

dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

No, i don't. if i did i would have tried it. do you have to sign up an appled ID for iCloud? If the answer is yes then they should mention that in the set-up instructions.

After setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What;'s going on?

after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

What OS do you have? Have you tried the latest drivers?
http://tascam.com/product/us-122l/downloads/
alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

HI, I have a Canon Pixma MG5250 printer and it doesn't seem to recognize iPhoto. All my photos are in iPhoto but I can't access them when the printer's 'photo print' box comes up. Any suggestions? thanks

Hi,
I have a Mac OS X version 10.5.8
I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
All other aspects of the printer such as scanning and printing documents are working. When I open the printer's
'photo print' box on my Mac, it cannot access iPhoto.
I would really appreciate any feedback and suggestions as to what to do.
thanks.

If you want to print a photo that's in your library you should do so from iPhoto. Select the photo, crop to the size you want to print and type Command+P to start the print process. In the Print window select the paper size and print size, printer and then click on the Print button.
OT

I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

Menu > File > Export > Word or PDF
Virtually no businesses have Pages to be able to read .pages files.
Definitely not those with PCs, because there is no version of Pages for PCs.
Peter

Hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise it anyone have an idea what I should do?

hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise it anyone have an idea what I should do?

If you are trying to configure the AirPort Express using wireless, you must first log on to the wireless signal that the Express is broadcasting to establish a connection.
Look for a wireless network with a name like Apple Network xxxxxx where the "x" could be a number or letter. No password is required to log on.
Most folks find it easier to temporarily connect using an Ethernet able as stic suggests in his post....if you have one handy. Once the device is configured, you can disconnect the Ethernet cable.

My txt message settings recently changed to send txts from my Mac email rather than my phone# and there doesn't seem to be a way to change the settings back. The phone# in receive at screen is under intensified so unselectable. Any suggestions?

My txt message settings recently changed to send txts from my Mac email rather than my phone# and there doesn't seem to be a way to change the settings back. The phone# in receive at screen is under intensified so unselectable. Any suggestions?

After reading what you have posted, I checked my iPhone 4S. When looking at messages in settings, my receive at has 2 addresses, my phone number and my Apple ID email address. The phone number is "under intensified" as you describe it. Checking the Caller ID, it shows my phone number and Apple ID email. The phone number is checked. This all seems to be the same as you describe yours. My text messages are all working as they always have, and they are showing as coming from my phone number. Both to people that I iMessage with and people that I can only text with. I'm not sure why you say texts are being sent from your Mac email. Did someone receive a text that shows the email as the return address?

ITunes and QuickTime doesn't open up on Windows Vista

Hi! I will apreciate all who tries to answer this question.
I have Windows Vista on my HP laptop and I dowloaded iTunes and QuickTime.
I had no problem downloading it, but then opening it came a box.
It said:
iTunes has stopped working
Windows can check online for a solution to the problem
-> Check online for a solution and close the program
-> Close the program
View problem details
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.1.1.4
Application Timestamp: 4d06bba9
Fault Module Name: StackHash_fd00
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00227d80
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Then I press close the program and a speech bubble appears at the
bottom right corner of the screen.
It said:
iTunes was closed.
To help protect your computer, Data Execution Prevention
has closed iTunes.Click to learn more.
I have no idea whats hapening.
HELP!

excellent information, sparkly.
Fault Module Name: StackHash_fd00
Fault Module Version: 0.0.0.0
... and:
To help protect your computer, Data Execution Prevention has closed iTunes
... and the QuickTime Player not launching either (it's a "QuickTime has stopped working" error?).
With that combination, we need to check on some other application (apart from QuickTime itself) stashing old QuickTime componentry on the PC in an unorthodox location. (Codec packs and video converters are the usual suspects with that, although some games might do the same.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and "Hide extensions for known file types" is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
*If you have a 32-bit version of Windows,* open the "System32" folder.
*If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

My iPhone 5 randomly shutdown and rebooting doesn't seem to work for me, what should I do?

It also happens when I'm charging my phone, and also the battery percentage doesn't show that correct battery level not unless I turn off and on.. I tried rebooting the phone but it doesn't seem to work for me, random shutdown still happens..

Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Problems sharing screen (able to share document and whiteboard) - doesn't seem to be pop-up issue or account issue (can share screen when accessed from my laptop). Help!!!

I can not share my screen (I can share documents and whiteboard) even after having Add-In installed. When I click on Share My Screen, the window which asks what I want to share (e.g., desktop) does not appear. Doesn't seem to be pop-up blocker issue.
I am able to do this on my personal laptop (installing the Add-In did the trick for that). Have rebooted and it still doesn't work ... at a loss ...

I can not share my screen (I can share documents and whiteboard) even after having Add-In installed. When I click on Share My Screen, the window which asks what I want to share (e.g., desktop) does not appear. Doesn't seem to be pop-up blocker issue.
I am able to do this on my personal laptop (installing the Add-In did the trick for that). Have rebooted and it still doesn't work ... at a loss ...

I have white eyes on my pictures and there doesn't seem to be anything to correct this problem (only a red eye button).

Just wanted to mention that I have the newest ios 6.0.1 software update on my 4s phone and now all my pictures have "white eye". There doesn't seem to be anything to correct this problem (only a red eye button).

....tough croud!
https://discussions.apple.com/thread/2495024?start=0&tstart=0
http://thebeginnerslens.com/iphone-photography/white-eye-photos-iphone-4-led-fla sh-apples-biggest-camera-blunder.html

HT1349 I had iTunes and QuickTime on my p.c. and they stopped working. Now I can't uninstall them or re-install them. I'm stuck and Apple doesn't seem to have any avenue to go down concerning their programs. I'm getting really frustrated. Anybody know wha

Why can't I get my iTunes or Quicktime to play? I've had my pc checked and it isn't a problem there. My java is up to date and all other programs work well. Other people I know have been having similar problems with Apple downloads. Now I can't uninstall them therefore I can't re install them. Help! Anybody out there have the same problems? I've tried every suggestion I've gotten from these blogs and can't get Apple to respond.

why are you posting this in the iPhone forum?

[SOLVED] Mpd and sonata doesn't seem to work

Hi guys!
I 'm facing with an issue . I can't seem to configure mpd correctly to run it with sonata .
I've followed the alternative setup from archwiki and this is my config file .
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/andreas/Downloads/Torrents"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/home/andreas/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/home/andreas/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/home/andreas/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/home/andreas/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/home/andreas/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "andreas"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## format "44100:16:2" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
All the files required are in my /home/andreas/.mpd/ directory
config
mpd.db
mpd.error
mpd.log
mpd.pid
mpdstate
playlists
I've also added to my .xinitrc file
mpd /home/andreas/.mpd/config
I 'm sure i've done something wrong but don't know what it is . If anyone could help me out i would be grateful
THanks a for all your help!
Last edited by shak (2010-04-19 23:08:09)

shak wrote:
I've followed the first method with the mpd daemon and everything worked fine .
THanks for all your help everyone !
The add of MPD : ALL to hosts.allow seems to solved it .
Thanks again!
Nice.
Please mark threads as [SOLVED] when they are. You can do so by editing the opening post.

Error 1905 and quicktime doesn't seem to actually exist on my computer

Similar Messages

Maybe you are looking for