Error 1906, 1603,1628
I tried to update my iTunes software and I received the error message 1906: C://Windows\Installer\ae8c8c.msi Error - 2147286775. I tried to reupdate the software after turning off my antivirus software and I received Error 1603. So I restarted my computer and tried again and received error 1628. What do I do because I cant get iTunes back on my computer to update my iPod.
anyone help? please??
Similar Messages
-
Error 1906? error with ipod updater
I installed itunes 5 , pc/itunes no longer recognizes ipod. tried to download the 9-06 ipod updater. installing it, it gets as far as registering the product then, i get this message:
error 1906. Failed to cache package C:\WINDOWS\Installer\1bab014.msi. Error -2147286775. contact your support personel.
retry or cancel.
retry gets same result.
cancelling gets:
error 1603 Fatal error during installation.
ANY HELP? PLEASE?anyone help? please??
-
I purchased a 16gb ipod touch 1 gen and it wont restore or show the battery chaging icon. It shows the symbol of usb cable and what appears to be an itunes symbol without the itunes words being displayed. Upon trying to restore I have gotten error codes 1603 & 1604. I referred to the apple website for assistance and followed the steps to the letter with no results. So what else should I try or could I try because I have has no such luch thus far? I have held the home button and power button I tried to enter DFU mode but unsuccessful due to the screen boots with apple logo then immediately goes to the itunes screen and no further only when connected. Will not power on without usb connection have charged battery to see if it was the issue and no battery bar locator displays with or without being connected to PC.
So you did all this:
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1603
Did you try the last paragraph too? -
ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603
Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many ThanksHello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Exchange Server 2013 Missing file on ISO install Error Code 1603
Hi all, a mystery needs solving any suggestions much appreciated:
We are trying to install Exchange Server 2013 on Windows 2012 server.
The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
All preparation and requisites in place.
During Stage 2 Copying files, we receive an error code 1603 and installation halts.
The error states:
Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
Verify that the file exists and that you can access it.'.
We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
We have tried both Mailbox/Client Access and Mailbox only installations.
The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
Any ideas anyone, could we source a different ISO or copy of the file or ?????
Many thanks in advanceHad the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
a CSS and not as a TXT.)
I reran the install and it completed without issue. -
Windows Update KB2467173 fails with Error code 1603
My windows update is failing over and over again with this message and it won't update C++ redistributable that a new program I started using requires.
The event log says as follows:
Product: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.30319 - Update 'KB2467173' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\me\LOCALS~1\Temp\Microsoft Visual C++
2010 x86 Redistributable Setup_20150210_173547615-MSI_vc_red.msi.txt.
Thank you in Advance.I would recommend that you start with recommendations shared here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/failure-to-install-windows-updates-error-code/934854af-0e1b-451e-889c-2fa869bab82f
If this does not help then you will need to examine the txt log file (The path is in the error message) to get more details.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
I’ve followed all the instructions to upgrade my ISScript Installer but I still get error message 1603, and can’t upgrade iTunes to v6. I also can’t purchase songs until I upgrade. You would think that Apple would take care of this asap. Once and for all, what’s going on, and how do I correct it? It looks like I’ll be buying my music elsewhere and playing MP3’s on my iPod.
hi James!
The install script engine on this machine is older than the version required to run this setup. If available, please run the latest version of ISScript.msi, or contact your support personnel for further assistance.
okay. checking on something further now. (i couldn't quite determine this from your original post.)
which InstallShield document advice did you implement?
was it:
Setup Is Unable To Find or Update ISScript.msi
... or:
Update to the Latest InstallShield Installation Engines
if it was the latter one, which version of the InstallShield Engine did you install?
love, b -
Get error message 1603 when trying to restore mini
Hello,
am getting error message 1603 while attempting to restore Ipod mini using latest version of iTunes. Running Vista totally updated.iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
The iPhone "iPhone" could not be restored. An unknown error occurred (1603)
Went to update my iPhone on iTunes...gave me an error saying I must restore my phone before I can update...which meant losing pics and songs but ok...gotta have my phone...now it extracts software but when it gets to "Preparing iPhone for restore..." it will soon have this message that follows...The iPhone "iPhone" could not be restored. An unknown error occurred (1603)...I have tried many many times and same result...then iTunes pops up with a message saying that your phone is in recovery and must be restored before using iTunes...and my phone has a yield sign that says please connect to iTunes...I kinda need my phone so...ummm HELP!
Hey jkhCotton,
Do you see the same error when trying to restore from another user account?
This article describes creating and testing from another user account.
http://docs.info.apple.com/article.html?artnum=305491
If it has the same issue in another user account try the "System-wide Troubleshooting" tips in that article.
Also, make sure the latest version of iTunes is installed.
http://www.apple.com/itunes/download/
Jason -
Error message: IPod could not be restored. An unknown error occurred (1603)
After I upgraded my ITunes and tried to sync my IPod touch I got this message.
Error message: IPod could not be restored. An unknown error occurred (1603)
Hi rtpeter1 ...
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
From here > iOS: Resolving update and restore alert messages -
Framemaker XI package does not install - MSI error 1708/1603
Hi,
I've created a Framemaker XI package with the "Adobe Application Manager Enterprise Edition", provided the serial number and added patch 11.0.2. The package was successfully created on a network share the installing admin account has full access rights to. Target system is a W2K8 R2 64bit terminal server.
When installing, the msi rolls back, throwing error 1708/1603 after collecting all it's msi properties, nothing gets installed. In the LOCAL folder of %APPDATA%, I find a file called PDApp.log with the follwing content:
6/27/2013 17:16:47 [INFO] DeploymentManager - Build Version - 3.1.105.0
6/27/2013 17:16:47 [INFO] DeploymentManager - Logging Level verbosity Set to 4
6/27/2013 17:16:47 [INFO] DeploymentManager - Executing the deferred custom action.
6/27/2013 17:16:47 [INFO] DeploymentManager - Obtained the following as CustomActionData
6/27/2013 17:16:47 [INFO] DeploymentManager - mode=install;sourceDir=H:\TIMRS\4 ACME_Framemaker_XI\Build\;installDir=;origDB=H:\TIMRS\4 ACME_Framemaker_XI\Build\ACME_Framemaker_XI.msi
6/27/2013 17:16:47 [INFO] DeploymentManager - mode=install;sourceDir=H:\TIMRS\4 ACME_Framemaker_XI\Build\;installDir=;origDB=H:\TIMRS\4 ACME_Framemaker_XI\Build\ACME_Framemaker_XI.msi
6/27/2013 17:16:47 [INFO] DeploymentManager - Original database path is : H:\TIMRS\4 ACME_Framemaker_XI\Build\ACME_Framemaker_XI.msi
6/27/2013 17:16:47 [INFO] DeploymentManager - OptionXML saved at location :: C:\Users\User\AppData\Local\Temp\{65DEE398-291E-476D-B68C-5ABD59EC6C49}\\{12E9F8D1-641B-4 C27-A165-D3C34F200ECB}
6/27/2013 17:16:47 [INFO] DeploymentManager - Build Version - 3.1.105.0
6/27/2013 17:16:47 [INFO] DeploymentManager - Logging Level verbosity Set to 4
6/27/2013 17:16:47 [INFO] DeploymentManager - Initializing Custom Action Data from parameters
6/27/2013 17:16:47 [INFO] Utilities - Folder does not exist
6/27/2013 17:16:47 [INFO] DeploymentManager - Provisioning Tool path is (C:\Users\User\AppData\Local\Temp\{65DEE398-291E-476D-B68C-5ABD59EC6C49}\\{DF00B53B-6298- 4B11-B2BB-4221D161D441}).
6/27/2013 17:16:47 [INFO] Utilities - Folder does not exist
6/27/2013 17:16:47 [ERROR] DeploymentManager - Failed to Initialize....The Setup base path does not exist.
6/27/2013 17:16:47 [ERROR] DeploymentManager - Failed to Initialize from parameters.
I don't know where the problem is, but it seems that installation fails because something is missing in the package?
Anyone?
best regards
OlafDear Jeff,
thank you for your answer. I finally managed to get my hands on a German phone number for Adobe support. Unfortunately they denied my service request because we haven't bought a service contract. I stated that I've read that "support for installation problems is usually free of charge", but that is, according to the German support team, only valid for standard, single user installation problems, not for packaging with AAMEE.
Since the phone numer is hard to find (at least it was for me), I publish it here:
+49 69 500718 55
I hope that's useful for those of you with "standard installation problems". Me thinks, Germany is a high value target for the NSA, but not for Adobe from an after sales service perspective. (Sorry, couldn't resist... :-) )
I will contact TSC support now via mail. Thanks again Jeff, you're doing a good job here.
best regards
Olaf -
Dreamweaver CS4 install problem, error code 1603
Hi!
I have for some weeks i have download home the trial of Deamweaver CS4 and it works and i was happy..
A few days later i remove the program from my computer..
Now i will install on my computer but it not works, it come upp a error message 1603..
I have all the adobe program install on my computer and i will install DW CS4 but it not works!
And it is a Windows vista computer..
Thanks for the help!
//EmilIs it the first time installation of the master collection on this machine or you uninstaaled and re-instaled it once before, and now when re-installing facing this problem.
-
Error 1406 & 1603 when trying to install quicktine version 7
After installing the latest itunes upgrade and then having to install Quicktime 7 stand alone I get Error 1406 & 1603 when trying to install quicktine version 7.
My itunes no longer opens stating i do not have the latest version of Quicktime!!!
I spotted this on another thread but could see no answers
HELP!hi Scooby2!
have you worked through this document yet?
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
love, b -
Issues deploying Adobe Shockwave.msi - error 0x643(1603)
Hi
I am trying to deploy Adobe Shockwave msi 12.1.1.151 package in SCCM 2012 R2 with following command on x64 bit machines
Command- msiexec /i "sw_lic_full_installer.msi" /qn
I can install package manually on command prompt using same command
but sccm deployment failed with error 0x643(1603)
Software Center shows Post due - will be retired status
I can seeprogram files downloaded in ccmcache
I have checked appdiscovery.log and found following multiple times
I review Technet but none of solutions worked for me, alredy spent lot of time to figure out but same results
Performing detection of app deployment type Adobe Shockwave Player 12.1 - Windows Installer (*.msi file)(ScopeId_9DAA34A9-2E47-4FEB-8AE5-E726691FA2FD/DeploymentType_dc87d32a-64bc-4948-b438-1d2b41666d37, revision 6) for system.
+++ Application not discovered. [AppDT Id: ScopeId_9DAA34A9-2E47-4FEB-8AE5-E726691FA2FD/DeploymentType_dc87d32a-64bc-4948-b438-1d2b41666d37, Revision: 6]
+++ Did not detect app deployment type Adobe Shockwave Player 12.1 - Windows Installer (*.msi file)(ScopeId_9DAA34A9-2E47-4FEB-8AE5-E726691FA2FD/DeploymentType_dc87d32a-64bc-4948-b438-1d2b41666d37, revision 8) for system.
AppEnforce.log
+++ Application not discovered. [AppDT Id: ScopeId_9DAA34A9-2E47-4FEB-8AE5-E726691FA2FD/DeploymentType_dc87d32a-64bc-4948-b438-1d2b41666d37, Revision: 8]
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
App enforcement environment:
Context: Machine
Command line: msiexec /i "sw_lic_full_installer.msi" /qn
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\7e
Working directory:
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Prepared working directory: C:\Windows\ccmcache\7e
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Prepared command line: "C:\Windows\system32\msiexec.exe" /i "sw_lic_full_installer.msi" /qn /qn
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Valid MSI Package path = C:\Windows\ccmcache\7e\sw_lic_full_installer.msi
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Advertising MSI package [C:\Windows\ccmcache\7e\sw_lic_full_installer.msi] to the system.
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Executing Command line: "C:\Windows\system32\msiexec.exe" /i "sw_lic_full_installer.msi" /qn /qn with system context
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Working directory C:\Windows\ccmcache\7e
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Post install behavior is BasedOnExitCode
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Waiting for process 4408 to finish. Timeout = 20 minutes.
AppEnforce 29/10/2014 6:46:19 PM
1580 (0x062C)
Process 4408 terminated with exitcode: 1603
AppEnforce 29/10/2014 6:46:21 PM
1580 (0x062C)
Looking for exit code 1603 in exit codes table...
AppEnforce 29/10/2014 6:46:21 PM
1580 (0x062C)
Unmatched exit code (1603) is considered an execution failure.
AppEnforce 29/10/2014 6:46:21 PM
1580 (0x062C)
I would really appreciate suggestions and help
Thanks
RJ
RJ09Seems to work fine for me.
I would delete the application from configuration manager and start again, it takes 2 seconds to add the app in.
Create Application:
Type - Windows installer.
Location - Browse to the UNC path of the msi via it's share.
Next
Next
Name - Use default - Adobe Shockwave Player 12.1
Leave the default command line as it is : msiexec /i "sw_lic_full_installer.msi" /q
Install behaviour - install for system
Next
Close
It will automatically create the detection method for you.
Deploy content to the distribution pionts
Deploy to test machine. -
MP Installation success or error status: 1603.
Hi guys,
I try to install MP role on a new sccm 2012 server. Setup failed, I try:
- Remove the MP as a site system role (if it is still installed), wait for it to finish
- Remove IIS completely
- Reboot the server
- Stop the Task Scheduler Service
- Rename the %windir%\Tasks folder to something else (or move it)
- Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
- Reinstall IIS, BITS, WebDAV
- Insure BITS and WebDAV are enabled
- Reinstall the MP
but still failed.
mpsetup.log
<09/10/14 13:49:33> SMSMP Setup Started....
<09/10/14 13:49:33> Parameters: D:\SCCM_App\bin\x64\rolesetup.exe /install /siteserver:HCVX382 SMSMP 0
<09/10/14 13:49:33> Installing Pre Reqs for SMSMP
<09/10/14 13:49:33> ======== Installing Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Found 2 Pre Reqs for Role SMSMP
<09/10/14 13:49:33> Pre Req MSXML60 found.
<09/10/14 13:49:33> No versions of MSXML60 are installed. Would install new MSXML60.
<09/10/14 13:49:33> Enabling MSI logging. msxml6_x64.msi will log to D:\SCCM_App\logs\msxml6_x64MSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\00000409\msxml6_x64.msi
<09/10/14 13:49:33> msxml6_x64.msi exited with return code: 0
<09/10/14 13:49:33> msxml6_x64.msi Installation was successful.
<09/10/14 13:49:33> Pre Req SqlNativeClient found.
<09/10/14 13:49:33> SqlNativeClient already installed (Product Code: {3965C9F9-9B9A-4391-AC4B-8388210D3AA0}). Would not install again.
<09/10/14 13:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<09/10/14 13:49:33> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Installing the SMSMP
<09/10/14 13:49:33> Passed OS version check.
<09/10/14 13:49:33> IIS Service is installed.
<09/10/14 13:49:33> No versions of SMSMP are installed. Installing new SMSMP.
<09/10/14 13:49:33> Enabling MSI logging. mp.msi will log to D:\SCCM_App\logs\mpMSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\mp.msi CCMINSTALLDIR="D:\SMS_CCM" CCMSERVERDATAROOT="D:\SCCM_App" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<09/10/14 13:50:23> mp.msi exited with return code: 1603
<09/10/14 13:50:23> Backing up D:\SCCM_App\logs\mpMSI.log to D:\SCCM_App\logs\mpMSI.log.LastError
<09/10/14 13:50:23> Fatal MSI Error - mp.msi could not be installed.
<09/10/14 13:50:23> ~RoleSetup().
mpmsi.log
OBJ:SMSMP_StateMessages,8180,8181,novice,0
CTR:TotalReceived,8182,8183,65536,novice,0
CTR:TotalRejected,8184,8185,65536,novice,0
CTR:ProcessedPerSecond,8186,8187,272696320,novice,0
APP:SmsMPInventory,D:\SMS_CCM\mpperf.dll,1033|d:\sms_ccm\1033\mpres.dll
OBJ:SMSMP_DdrMgr,8080,8081,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_HinvMgr,8112,8113,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
CTR:NOIDMIFGroups,8114,8115,65536,novice,0
OBJ:SMSMP_HinvRetryMgr,8116,8117,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_RelayMgr,8118,8119,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvMgr,8120,8121,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvCollFileMgr,8122,8123,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_StatusMgr,8128,8129,novice,0
CTR:FailedEvents,8130,8131,65536,novice,0
CTR:NumberOfFiles,8138,8139,65536,novice,0
CTR:RejectedEvents,8132,8133,65536,novice,0
CTR:TotalEvents,8134,8135,65536,novice,0
CTR:TotalEventsPerSec,8136,8137,272696320,novice,0
Property(S): CcmSetObjectSecurity = FIL:C:\Windows\system32\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:C:\Windows\SysWOW64\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\PolicyAgent.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\StatusAgentProxy.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\Sched_ps.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\CcmExec.exe
D:(A;CIOI;GR;;;IU)(A;CIOI;GR;;;LS)
FIL:D:\SMS_CCM\CcmExec_ps.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\LSUtilities.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\fsputillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\StateMessage_ps.dll
D:(A;CIOI;GXGR;;;IU)
DIR:D:\SMS_CCM\Temp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFRFW;;;IU)(A;OI;GRGW;;;CO)
DIR:D:\SMS_CCM\Logs
D:P(A;CIOI;FR;;;BU)(A;CI;0x100023;;;IU)(A;CI;0x100023;;;LS)(A;CI;0x100023;;;S-1-5-17)(A;CI;0x100023;;;NS)(A;IOOI;0x13008F;;;IU)(A;IOOI;0x13019F;;;LS)(A;IOOI;0x13008F;;;S-1-5-17)(A;IOOI;0x13008F;;;NS)(A;IOCIOI;0x0;;;OW)(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)
DIR:D:\SMS_CCM\Staging
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SMS_CCM\SystemTemp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;OICINP;FR;;;IU)
REG:MACHINE\SOFTWARE\Microsoft\CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;NS)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging
D:(A;CIOI;GR;;;AU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging\@Global
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;AU)
REG:MACHINE\Software\Microsoft\CCM\XMLSchema
D:(A;CIOI;GR;;;AU)
WMI:CCM
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;;0x00020001;;;IU)
WMI:CCM\Policy
O:BAG:BAD:
WMI:CCM\Events
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;CI;0x00020001;;;LS)
WMI:CCM\LocationServices
O:BAG:BAD:
WMI:CCM\NetworkConfig
O:BAG:BAD:
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
WMI:CCM\DataTransferService
O:BAG:BAD:(A;;0x00020001;;;IU)
FIL:D:\SMS_CCM\ccmgencert.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmhttp.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\CcmTask.dll
D:(A;CIOI;GRGX;;;IU)
DIR:D:\SMS_CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFR;;;IU)(A;CI;FXFR;;;LS)(A;CI;FXFR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmutillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\ccmclientisapi.dll
D:(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
DIR:D:\SCCM_App\CCM
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SCCM_App\Client
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)
DIR:D:\SCCM_App\CCM\Incoming
D:(A;;0x001200EF;;;LS)(A;;0x001200EF;;;S-1-5-17)(A;IOOICI;GA;;;LS)(A;IOOICI;GA;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmisapi.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\smscore.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
WMI:CCM\XmlStore
O:BAG:BAD:
FIL:D:\SMS_CCM\mpisapi_ps.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\getsdmpackage.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\GetAuth.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\getpolicy.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\1033\ccmres.dll
D:(A;CIOI;GRGX;;;IU)(A;CIOI;GRGX;;;LS)
Property(S): SMSCWSREGKEYNAME = MPCWSPath
Property(S): CcmDetectUninstall_ActionText = Set CCMREMOVEPRODUCT if REMOVE equals to TRUE.
Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
Property(S): CcmWmiRollback_ActionText = Deletes the existing site policy config and then recompiles MOF to restore old WMI instances.
Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
Property(S): PRIMARYFOLDER = TARGETDIR
Property(S): REBOOT = ReallySuppress
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): VersionNT64 = 603
Property(S): CCMINSTALLDIR = D:\SMS_CCM
Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
,{84ECA343-5158-48BB-87C3-37EF4B919F20},State Message Manager Endpoint,Serial,Normal,false,Internal,,,,,StateMessageManager.log,CCM_Framework
MP_DdrEndpoint,{36C7CE27-094C-4E55-B069-69CD633E52C0},MP Ddr Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Ddr.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_ddrmanagerconfig
MP_SinvEndpoint,{6E9048D4-A7A6-420D-AF2A-450582F1960A},MP Software Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Sinv.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvmanagerconfig
MP_SinvCollFileEndpoint,{D26851EE-C93C-43FF-9754-C5FBEFEED553},MP Software Inventory Collected Files Handler,Serial,Long,false,ClientSigned,,43200,,,MP_SinvCollFile.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvcollfilemanagerconfig
MP_HinvEndpoint,{30297A13-1044-4E36-A87D-2171D2233946},MP Hardware Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Hinv.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_hinvmanagerconfig
MP_RelayEndpoint,{B80F30F1-AB53-4A86-8A32-770D8A418B99},MP Relay Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Relay.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_relaymanagerconfig
MP_LocationManager,{F21CCBF9-50A5-45E0-9B65-DF6C423E90F8},LocationManagerHandler Class,NoQueue,Long,false,All,,43200,,,MP_Location.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"
MP_TokenManager,{6FC37979-BF68-4B43-878F-CC5446E168BF},TokenManagerHandler Class,NoQueue,Long,false,ClientSigned,,43200,,,MP_Token.log,Conf
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = ConfigMgr Management Point Setup
Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): PolReqStagingDir.1114972D_590D_4AB6_BA2E_779928CEDCC2 = D:\SMS_CCM\PolReqStaging\
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
Property(S): CcmDefaultPolicyAuthority = SMS:MP:Default:{F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): MPVDirRoot.67022EC1_A401_46E9_91FC_2DF2ED04CF15 = D:\SMS_CCM\SMS_MP\
Property(S): Res1033.0EACD2EE_412B_4985_9727_96BC217AABD8 = D:\SMS_CCM\1033\
Property(S): Res1033.4CB41E5B_59DE_4D09_98C5_332377961F73 = D:\SMS_CCM\1033\
Property(S): MsiLogFileLocation = D:\SCCM_App\logs\mpMSI.log
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_App\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 6264
Property(S): VersionDatabase = 200
Property(S): MsiSystemRebootPending = 1
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 10257
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:50:23
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\274121.msi
Property(S): OriginalDatabase = D:\SCCM_App\bin\x64\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
Property(S): IISAnonymousUserAccount = IUSR
Property(S): ROOTDRIVE = G:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 74701392
Property(S): PrimaryVolumeSpaceRequired = 25840
Property(S): PrimaryVolumeSpaceRemaining = 74675552
Property(S): INSTALLLEVEL = 1
Property(S): CcmAdministratorsGroupName = Administrators
Property(S): CcmUsersGroupName = Users
Property(S): CcmCreatorOwnerAccountName = CREATOR OWNER
Property(S): PrimaryVolumePath = D:
Property(S): SOURCEDIR = D:\SCCM_App\bin\x64\
Property(S): SourcedirProduct = {F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): LASTSTATESERIALNUM = 0
Property(S): CCMHTTPSPORT = 443
Property(S): CCMHTTPSSTATE = 0
Property(S): CCMHTTPPORT = 80
Property(S): ProductToBeRegistered = 1
MSI (s) (18:A4) [13:50:23:792]: Note: 1: 1708
MSI (s) (18:A4) [13:50:23:792]: Product: ConfigMgr Management Point -- Installation operation failed.
MSI (s) (18:A4) [13:50:23:793]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (18:A4) [13:50:23:808]: Deferring clean up of packages/files, if any exist
MSI (s) (18:A4) [13:50:23:808]: MainEngineThread is returning 1603
MSI (s) (18:74) [13:50:23:814]: RESTART MANAGER: Session closed.
MSI (s) (18:74) [13:50:23:814]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 13:50:23 ===
MSI (s) (18:74) [13:50:23:820]: User policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Machine policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:822]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (18:74) [13:50:23:823]: Destroying RemoteAPI object.
MSI (s) (18:C0) [13:50:23:823]: Custom Action Manager thread ending.
MSI (c) (78:B4) [13:50:23:825]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:B4) [13:50:23:826]: MainEngineThread is returning 1603
=== Verbose logging stopped: 10/09/2014 13:50:23 ===MSI (c) (18:A8) [15:00:30:016]: Resetting cached policy values
MSI (c) (18:A8) [15:00:30:016]: Machine policy value 'Debug' is 0
MSI (c) (18:A8) [15:00:30:016]: ******* RunEngine:
******* Product: D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
******* Action:
******* CommandLine: **********
MSI (c) (18:A8) [15:00:30:016]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (18:A8) [15:00:33:018]: Failed to grab execution mutex. System error 258.
MSI (c) (18:A8) [15:00:33:027]: Cloaking enabled.
MSI (c) (18:A8) [15:00:33:027]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (18:A8) [15:00:33:031]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (18:A8) [15:00:33:033]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (18:A8) [15:00:33:034]: MainEngineThread is returning 1618
=== Verbose logging stopped: 10/09/2014 15:00:33 ===
MSI (s) (8C:A0) [15:19:09:082]: Hello, I'm your 64bit Elevated custom action server.
Action start 15:19:08: SkipInstallCA.
CustomAction SkipInstallCA returned actual error code 259 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:19:09: SkipInstallCA. Return value 5.
Action ended 15:19:09: INSTALL. Return value 1.
Property(S): ProductCode = {633F3A7E-471D-4C08-A643-C184A2EE19AB}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 6.10.1129.0
Property(S): ProductLanguage = 1033
Property(S): UpgradeCode = {5BBED1F8-E6F3-4A02-BC97-26D35BE200CA}
Property(S): ARPPRODUCTICON = ARPIco
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): DiskPrompt = [1]
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): InstallMode = Typical
Property(S): ErrorIcon = ErrorIco
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): SetupIcon = SetupIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ModifyIcon = ModifyIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): WelcomeBmp = WelcomeBmp
Property(S): ApplicationUsers = AllUsers
Property(S): Details = 0
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): _IsMaintenance2 = Modify
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): Interrupted = 0
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): MINIMUMOS = true
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ErrorDialog = ErrorDlg
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 603
Property(S): ARPHELPLINK =
http://go.microsoft.com/fwlink/?LinkId=52156
Property(S): SecureCustomProperties = NEWERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND2.0F33386E_8789_4165_9182_03203162EFEB
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): USERNAME = Windows User
Property(S): DialogTitleSetup = Setup
Property(S): DialogTitlePatch = Patch
Property(S): DialogTitleUpgrade = Upgrade
Property(S): Text_ArrowLeft = <
Property(S): Text_ArrowRight = >
Property(S): ButtonText_Next = Next
Property(S): ButtonText_Next_Hot = &Next
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Cancel_Hot = &Cancel
Property(S): ButtonText_Back = Back
Property(S): ButtonText_Back_Hot = &Back
Property(S): ButtonText_Finish = Finish
Property(S): ButtonText_Finish_Hot = &Finish
Property(S): ButtonText_Update = Update >
Property(S): ButtonText_Update_Hot = &Update >
Property(S): ButtonText_Ok = OK
Property(S): ButtonText_Ok_Hot = &OK
Property(S): ButtonText_Yes = Yes
Property(S): ButtonText_Yes_Hot = &Yes
Property(S): ButtonText_No = No
Property(S): ButtonText_No_Hot = &No
Property(S): ButtonText_Abort = Abort
Property(S): ButtonText_Abort_Hot = &Abort
Property(S): ButtonText_Ignore = Ignore
Property(S): ButtonText_Ignore_Hot = &Ignore
Property(S): ButtonText_Retry = Retry
Property(S): ButtonText_Retry_Hot = &Retry
Property(S): ButtonText_Change = Change...
Property(S): ButtonText_Change_Hot = &Change...
Property(S): ButtonText_Help = Help
Property(S): ButtonText_Help_Hot = &Help
Property(S): ButtonText_Install = Install
Property(S): ButtonText_Install_Hot = &Install
Property(S): ButtonText_Exit = Exit
Property(S): ButtonText_Exit_Hot = &Exit
Property(S): ButtonText_Remove = Remove
Property(S): ButtonText_Remove_Hot = &Remove
Property(S): ButtonText_Space = Space
Property(S): ButtonText_Space_Hot = &Space
Property(S): ButtonText_Browse = Browse...
Property(S): ButtonText_Browse_Hot = Bro&wse...
Property(S): ButtonText_DiskCost = Disk Cost...
Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
Property(S): LabelText_Status = Status
Property(S): LabelText_SerialNumber = &Serial Number:
Property(S): LabelText_UserName = &User Name
Property(S): LabelText_PersonName = Name
Property(S): LabelText_PersonOrganization = Company
Property(S): LabelText_InstallTo = Install to
Property(S): LabelText_Modify = &Modify
Property(S): LabelText_Repair = Re&pair
Property(S): LabelText_Remove = &Remove
Property(S): LabelText_Complete = &Complete
Property(S): LabelText_Custom = Cu&stom
Property(S): LabelText_NetworkLocation = &Network location:
Property(S): LabelText_LookIn = &Look in
Property(S): LabelText_FolderName = &Folder name
Property(S): LabelText_FeatureDescription = Feature description
Property(S): LabelText_CopyFilesFrom = Copy Files from
Property(S): LabelText_InstallFor = Install this application for
Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
Property(S): HeadText_WelcomePatch = Welcome to the Patch for
Property(S): HeadText_SetupWelcome = Welcome to the
Property(S): HeadText_SetupWelcome2 = Setup
Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
Property(S): HeadText_SetupInterrupted = Setup Interrupted
Property(S): HeadText_LicenseAgreement = License Agreement
Property(S): HeadText_FeatureSelection = Feature Selection
Property(S): HeadText_NetworkLocation = Network Location
Property(S): HeadText_ProgramMaintenance = Program Maintenance
Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
Property(S): HeadText_FilesInUse = Files in Use
Property(S): HeadText_DatabaseFolder = Database Folder
Property(S): HeadText_RegistrationInformation = Registration Information
Property(S): HeadText_CompletingSetup = Completing the
Property(S): HeadText_CompletingSetup2 = Setup
Property(S): HeadText_InstallingProduct = Installing
Property(S): HeadText_UninstallProduct = Uninstalling
Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
Property(S): HeadText_ReadyInstall = Ready to Install the Program
Property(S): HeadText_ReadyRepair = Ready to Repair the Program
Property(S): HeadText_ReadyModify = Ready to Modify the Program
Property(S): HeadText_RemoveProgram = Remove the Program
Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
Property(S): DescText_ServerImage = Setup will create a server image of
Property(S): DescText_ServerImage2 = at a specified network location. To continue, click Next.
Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
Property(S): DescText_PatchInstall2 = on your computer. To continue, click Update.
Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
Property(S): DescText_WizardComplete2 = on your computer. To continue, click Next.
Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
Property(S): DescText_CompleteSuspended2 = on your computer. To continue, click Next.
Property(S): DescText_SuccessfulInstallation = Setup has installed
Property(S): DescText_SuccessfulInstallation2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRemove = Setup has removed
Property(S): DescText_SuccessfulRemove2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRepair = Setup has repaired
Property(S): DescText_SuccessfulRepair2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulModify = Setup has modified
Property(S): DescText_SuccessfulModify2 = successfully. Click Finish to exit.
Property(S): DescText_SetupInterrupted = Setup was interrupted before
Property(S): DescText_SetupInterrupted2 = could be completely installed.
Property(S): DescText_PreparingSetup = Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
Property(S): DescText_FeatureSelection = Select the program features you want installed.
Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
Property(S): DescText_BrowseDestination = Browse to the destination folder.
Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
Property(S): Text_FinishExit = Click Finish to exit Setup.
Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
Property(S): Text_InstallWait = Please wait while the Install Wizard installs
Property(S): Text_InstallWait2 = . This may take several minutes.
Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWaitText2 = . This may take several minutes.
Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWait2 = . This may take several minutes.
Property(S): Text_ProgressDone = Progress done
Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
Property(S): Text_BeginInstallation = Click Install to begin the installation.
Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
Property(S): Text_EnterNetworkLocation2 = at the specified network location or click Cancel to exit Setup.
Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
destination drives.
Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
Property(S): Text_RemoveFromComputer = Remove
Property(S): Text_RemoveFromComputer2 = from your computer.
Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): Text_ClickRemove = Click Remove to remove
Property(S): Text_ClickRemove2 = from your computer. After removal, this program will no longer be available for use.
Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
Property(S): Text_OnlyMe = Only for &me ([USERNAME])
Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): ShortCutText = MSXML 6.0
Property(S): DialogTitle = MSXML 6.0 Parser Setup
Property(S): ProductName = MSXML 6.0 Parser
Property(S): ShortName = MSXML 6.0 Parser
Property(S): WrongPackage = This MSXML6.0 package is not supported on the current processor type.
Property(S): DialogPatchTitle = MSXML 6.0 Parser Patch
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): System64Folder = C:\Windows\system32\
Property(S): MsiLogFileLocation = D:\SCCM_ap\logs\msxml6_x64MSI.log
Property(S): PackageCode = {6A3B8AE9-3F13-4302-A5AE-C51A0BA1592E}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_ap\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 5220
Property(S): MsiRestartManagerSessionKey = 0feb3f07a88fb247a0f339814320aad0
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 12166
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:19:09
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\edbb.msi
Property(S): OriginalDatabase = D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (8C:A8) [15:19:09:199]: Note: 1: 1707
MSI (s) (8C:A8) [15:19:09:199]: Product: MSXML 6.0 Parser -- Installation completed successfully.
MSI (s) (8C:A8) [15:19:09:200]: Windows Installer installed the product. Product Name: MSXML 6.0 Parser. Product Version: 6.10.1129.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MSI (s) (8C:A8) [15:19:09:208]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:A8) [15:19:09:208]: MainEngineThread is returning 0
MSI (s) (8C:94) [15:19:09:213]: RESTART MANAGER: Session closed.
MSI (s) (8C:94) [15:19:09:213]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 15:19:09 ===
MSI (s) (8C:94) [15:19:09:214]: User policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:216]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:94) [15:19:09:217]: Destroying RemoteAPI object.
MSI (s) (8C:C4) [15:19:09:217]: Custom Action Manager thread ending.
MSI (c) (64:7C) [15:19:09:218]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (64:7C) [15:19:09:219]: MainEngineThread is returning 0
=== Verbose logging stopped: 10/09/2014 15:19:09 ===
Maybe you are looking for
-
Trouble with my T1's and E1's in the lab - please help.... :-)
I'm working through my CCIE Voice/Collaboration training materials and am just about finished with the physical construction of the lab. At this time I'm just going to install a new T1 card into my BR1 router and I'm trying to get my T1 to HQ (HQ ro
-
Firefox fills complete screen - no close box - can't shut down, etc. Makes it worthless
Opening firefox, takes me to default program Yahoo which opens to total full screen thus not showing any tool bars, no URL address field, and nothing at the bottom of screen either. Cant' even shut down properly. Downloaded the latest version and not
-
CS5/CS4 GUI User Interface Design
I have always been very unimpressed with the user interface design on Adobe CS4. It's riddled with problems and changes that make no sense and offer no advantages. For example, there is no longer a normal Windows title bar in many of the CS4 apps.
-
Query vs Toplink managed collection and cascade persist
A fairly simple situation: I have a 1-N relation which is managed by Toplink: 1 relation can have N calendars (I know, badly chosen class name, but alas). If I access the collection through the Toplink managed collection, make a change to one of the
-
Integrate new SQL Developer in to JDeveloper
Whether it is possible?