Error -1906 occured at SoundVib_SoundLevel.Lvlib:SVL Leq Sound LeveL (N Ch).vi:3

Hey all, I have this message error when I try to run my vi.
Possible reason,
Sound & Vibration: Multichannel measurements require that each signal has the same sample interval (identical dt or identical dr)

I am generating a analog signal and acquring the same signal. I want to visualise the generated and aquired signal on the sound level meter
as you can see on the attached vi. when I run the vi the error message ( error - 1906 occured at soundVib_SoundLevel.LvlibVL Leq sound level (N Ch).
Attachments:
Signal generation with sound level meter.vi ‏126 KB

Similar Messages

Error 363507 occurred at LabVIEWHTTPClient.lvlib:GET.vi:390001 - after upgrade to LV2014SP1

I am using the HTTP-tool to get the body text from a website.
After upgrading LV 2014 to SP1 I now receive:
Error 363507 occurred at LabVIEWHTTPClient.lvlib:GET.vi:390001
Possible reason(s):
LabVIEW: LabVIEW could not verify the authenticity of the server.
Complete call chain:
LabVIEWHTTPClient.lvlib:GET.vi:390001
Test.vi
Before the upgrade this worked with no issues.
My code also works fine on another PC that does not have SP1 (but 2014).
I tried installing the Runtime-Engine 2014 SP1 on a new PC - this also fails with error Error 363507.
What is going on?
The website I access is a public one, freely available in any browser. So I should not need authentication.
Obviously something changed going to SP1.
Bjarke Dahl-Madsen - CLA

Well, I can see the site from here, though some of Google's automatic translation from Danish to English does sound a little ominous, like the story: "Police Control of Easter" -- which is actually a story about the police stepping up DUI drug and alcohol enforcement, not the police controlling Easter.
But on a serious note, I don't see an issue right off, though it does appear to be related to that one site. One more thought, does this happen with all the links on that site? It might be related to this one page.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error 7 occurred at NI_LVConfig.lvlib:Load.vi

Hello
What is this error mean?
Error 7 occurred at NI_LVConfig.lvlib:Load.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
-mfp

What usually needs to be done is an extra Strip Path to the path when running an executable, to have it work in both environments you can use Application.kind property filter this step.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Error 1430 occurred at Open/Create/Replace File in NI_Fuzzy_Logic_API.lvlib:FL Load Fuzzy System.vi- Untitled 3 Possible reason(s): LabVIEW: The path is empty or relative. You must use an absolute path. Not A Path how can i copy it in new vi plz help

when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring
'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlited

Hello Nofil,
This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
Regards
Andrew George @ NI UK
Attachments:
Fuzzy Tanks with PI.vi ‏31 KB

Error 66 occurred while deploying on PXI-7830R

Hi guys,
i´m using a PXI 1031 Chassi with a NI PXI-7830R board.
When i want to deploy the system definition file in VeriStand 2013 this error appears:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error 66 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: Der Übertragungspartner hat die Netzwerkverbindung beendet. Wenn Sie die Funktion "VI-Referenz öffnen" auf eine VI-Server-Verbindung mit einem anderen Computer anwenden, überprüfen Sie unter Werkzeuge>>Optionen>>VI-Server, ob dem Computer Zugriff gewährt wird.
=========================
NI VeriStand: ??? in Server TCP Interface.lvlib:TCP Send Loop.vi:3000002->Server TCP Interface.lvlib:TCP Connection Manager.vi:7430001
In english: LabVIEW: The transfer partner has completed the network connection. If you select "Open VI Reference" function applied to a VI Server connection to another computer, check under Tools >> Options >> VI Server, whether the computer is granted access.
What i have done:
I created in LabVIEW 2013 a new "NI VeriStand FPGA Project" and modified the Vi as needed, built the bitfile and modified the .fpgaconfig, like it is described in this tutorial https://decibel.ni.com/content/docs/DOC-13815#Release_Version_History . After that i loaded the .fpgaconfig into the VeriStand system definition. Until here no errors....now i want to deploy it and the error appesared i mentioned above.....
I don´t have any idea what i could do now.
If you need any files for more understanding please tell me what you need.
yannick

I think so....maybe you have a look at the files. I changed the .fpgaconfig to an .txt, so don´t be confused ;-)
As i mentioned in my problem on top i followed the steps from those links i attached and customized the vi as i needed.
Attachments:
Custom Personality FPGA.vi ‏31 KB
fpgaconfig.txt ‏8 KB

"Error 7 occurred at Invoke Node..." when attempting to open .vi for editing

I am attempting to open a vi for editing, and instead the vi is attempting to execute. I get the error:
"Error 7 occurred at Invoke Node in BuildTargetBuildSpecification.vi->BuildXFS.vi"
Possible reason(s): LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
Method Name: Project: Open
When I close the Error Message dialog, Labview terminates.

Hi R.Jay,
Error 7 generally occurs when trying to create an executable when there is an extra instance of a top-level vi. You may need to remove the file as a support file (but leave it as the top level vi).
Are you trying to run an executable that has already been created? Unless you have already built an executable, it should not automatically run when opened. Also, was it built in a previous version of LabVIEW? Sometimes this error can be seen when you upgrade to a newer version without compiling.
Regards,
Lauren
Applications Engineering
National Instruments

Error 7 occurred at open vi reference in New Report.VI

Hello!
I use the report generation toolkit on LabView 7.0 to create a report in Excel. The program works fine until I make an executable version. I the get the error:
Error 7 occurred at open vi reference in New Report.VI
I use the New Report.VI, Bring Excel to front.VI and Save Report To File.vi
Can you pleace help me!!!

Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

A critical error has occured. Processing of the service had to be terminate

When manager wants to approve the employee leave request its giving following error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
     at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
     at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
     at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
     at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 47 more
   kindly help ASAP,

Hi,
Did you give enough authorizations to the user at the beack end.
Just Try giving SAP_ALL authorizations and check.
Regards,
Santhosh

Error Message: Sorry, a serious error has occurred that...

This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
Software- Premiere Pro (Version 5.03) Recently updated
OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
Footage used- all types
Error message text-
Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
The problem-
When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
Also any files that I have previous created also will not open properly.
Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
**Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
I have no 3rd party effects
not using Mecury to my knowledge.?

Has it worked OK in the past? If so, try System Restore.
While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly.
See here:
http://forums.adobe.com/message/6336879#6336879

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

An error has occurred:Invalid postback or callback argument in InfoView

Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM

This forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section

Error is occured while FTPing a BI publisher report

The following Error is occured while FTPing a BI publisher report. The scheduling was running fine for the lase 1 year .But this error is occuring in production schedule of the ftp for the last 2 days.When I do the FTP by 'Run Immediately' manually it works fine.
oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:4621] Document file to deliver not found : /u01b/obiee/OracleBI/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xdo/cache/xmlp7057786.tmp
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1131)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)

I've also encounter this error since many mounth now and especially when using Excel Template (not RTF Template) with FTP Delivery (Without Busting OR with ScheduleBustringOption=FALSE using BIP Web Service).
I've performed many tests trying to diagnose the cause but I need to redo these test because they was not done corretly. What I think is this is related with the processing of XML DATA with the corresponding Template.
I remember that in most cases I had the folowing conditions to reproduce the problem :
- Report is executed by scheduling it with FTP delivery
- The correponding query did not return data (empty XML structure)
- When execution ends, schedule status is SUCCESS (Data processing ???) but delivery is FAILED due to document not found in BIP temporary directories
- When scheduling the report without using the template (that is XML format output) then all work perfectly without ERROR
So you'll need to perform many test cases to identify cause OR submit bug on Oracle Support.
I think sometimes BIP needs some MINIMAL XML structure for generated data to be able to work without error with template (RTF or EXCEL) which contains special formating like chart for example.
Unfortunatly debugging those are very ........
We solved our problem by modiying the template until error dissapear when no data is returned by the report query (I did not create SR on Oracle Support for this issue)
Here is what I get in BIP log file when using my problematic excel template to reproduce error with a query that return empty dataset :
[051111_123444854][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production
[051111_123444857][][STATEMENT] XSLT temporary file *(/PATH_TO_BIP_TEMPORARY/xdo/tmp/cxmluFppViKt81198124878270451623.dat)* is set.
[051111_123445002][][STATEMENT] BOUNDSHEET [Feuil1] start=0xA466
[051111_123445003][][STATEMENT] BOUNDSHEET [Segment Mobile] start=0xA6B0
[051111_123445003][][STATEMENT] BOUNDSHEET [XDO_METADATA] start=0xBB00
[051111_123445003][][STATEMENT] BOUNDSHEET [Tableau croisé] start=0xBCC0
[051111_123445003][][STATEMENT] ===== SHEET start=0xA466 end=0xA6AF=====
[051111_123445004][][STATEMENT] ===== SHEET start=0xA6B0 end=0xBAFF=====
[051111_123445005][][STATEMENT] ===== SHEET start=0xBB00 end=0xBCBF=====
[051111_123445006][][STATEMENT] ===== SHEET start=0xBCC0 end=0xD904=====
*[051111_123445495][][EXCEPTION] java.lang.ArrayIndexOutOfBoundsException*
at java.util.Vector.elementAt(Vector.java:430)
at oracle.apps.xdo.excel.user.biff.RowBlock.getRow(Unknown Source)
at oracle.apps.xdo.excel.user.bimpl.BSheet.getRow(Unknown Source)
at oracle.apps.xdo.template.excel.util.ExcelUtil.getRowInSheet(Unknown Source)
at oracle.apps.xdo.template.excel.render.BookDataWriter.copyCell(Unknown Source)
at oracle.apps.xdo.template.excel.render.BookDataWriter.finishCell(Unknown Source)
at oracle.apps.xdo.template.excel.render.CellHandler.endElement(Unknown Source)
at oracle.apps.xdo.template.excel.render.BookDataParser.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1295)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:292)
at oracle.apps.xdo.template.excel.render.BookDataParser.parserXMLDocument(Unknown Source)
at oracle.apps.xdo.template.excel.ExcelController.processActionLanguage(Unknown Source)
at oracle.apps.xdo.template.excel.ExcelController.process(Unknown Source)
at oracle.apps.xdo.template.ExcelProcessor.process(Unknown Source)
at oracle.apps.xdo.service.excel.ExcelServiceTemplate.embedDataForExcelTemplate(ExcelServiceTemplate.java:718)
at oracle.apps.xdo.service.excel.ExcelServiceTemplate.embedServiceTemplateData(ExcelServiceTemplate.java:737)
at oracle.apps.xdo.servlet.ExcelCoreProcessor.transform(ExcelCoreProcessor.java:49)
at oracle.apps.xdo.servlet.CoreProcessor.processScheduledRequest(CoreProcessor.java:517)
at oracle.apps.xdo.servlet.CoreProcessor.processScheduledRequest(CoreProcessor.java:366)
at oracle.apps.xdo.servlet.CoreProcessor.generateScheduledDocument(CoreProcessor.java:114)
at oracle.apps.xdo.servlet.ReportImpl.renderScheduledJob(ReportImpl.java:357)
at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:977)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:418)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[051111_123445497][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:614] Finished processing the document.
[051111_123445497][][STATEMENT] [ID:614] Time elapsed for report processing : 8205, time from begining : 9423
[051111_123445497][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:614] Document content type : application/vnd.ms-excel
[051111_123445501][oracle.apps.xdo.servlet.scheduler.XDOJob][EXCEPTION] [ID:614] Unexpected exception occurred while the document delivery.
oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:614] Document file to deliver not found : */PATH_TO_BIP_TEMPORARY/xdo/tmp/xmlp1038692480549035173tmp*
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1178)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:496)
at org.quartz.core.JobRunShell.run(JobRunShell.java:196)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
The file not found */PATH_TO_BIP_TEMPORARY/xdo/tmp/xmlp1038692480549035173tmp* was created by BIP at the begining of the whole process with some other temporary files within the same temporary directory
I guess at end of process BIP tries to perform some kind of merging with all temporary files created and associated with the corresponding JOBID. May I'm wrong ???
Edited by: Cédric on 11 mai 2011 14:04

A communication error has occurred while invoking commands in SharePoint host process

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

Error -1906 occured at SoundVib_SoundLevel.Lvlib:SVL Leq Sound LeveL (N Ch).vi:3

Similar Messages

Maybe you are looking for