Error 1921 Ipod Service could not be stopped

I am trying to install Itunes 7.6 + Quicktime. On the download status screen it says Status: Stopping Service. The green activity bar stops and after awhile an error message pops up that says - Error 1921. Ipod Service could not be stopped. Verify that you have sufficient privileges to stop system services. It says retry and cancel. Pushing retry only results in the same error. I don't know what this means.

That can happen sometimes if the iTunes installer is having a hard time shutting down either iTunes or QuickTime (or applications using QuickTime) prior to the install. So let's try a "download, restart, then install” strategy.
Leave any iPod unplugged.
Download and save a copy of the iTunes installer to your hard drive. (Do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
Shut down running applications and restart the PC.
Do not open any other applications prior to attempting the iTunes install. Switch off antivirus and antispyware applications prior to the install.
Now start the install by doubleclicking the iTunesSetup.exe file.
Does the install go through properly this time?

Similar Messages

"Error 1921. Service '***' could not be stopped"

Hello,
After a few crashes from Ni MAX and troubles detecting by GPIB devices, I thought it would be a good idea to do a few updates on my VISA drivers, NI488.2, etc.
But when I run the NI update service on these, I get an error message ressembling the image below. Only thing different is that it complains it cannot stop the NI Lxi discovery service instead of the Ni mDNS Responder service. I then tried to run the Ni repair utility on MAX and a few relevant software modules like VISA and 488.2, only to get the error displayed below.
I tried running the command "net stop niLXIDiscovery" in a cmd prompt with no success. It simply tells me that the service is already stopping...
FYI, I have both LabView 2013 32 and 64 bit installed and both TestStand 2014 32 and 64 bit installed. I only use Ethernet and GPIB to communicate with my instruments.
Thank you!

Hi christianb,
In the list of services that can be accessed from the Contorl Panel, what is the startup type of the NI LXI Discovery Service? If it is automatic, would it be possible to change the type to manual and restart the computer? This would allow us to stop this service after the reboot of the computer and to continue to use the Update Service.
Are you the adminstrator of this machine?
Regards,
Jordan G.
Applications Engineer
National Instruments

Itunes will not setup....'ipod service' could not be stopped

While installing itunes...at Status: Stopping Services...a box appears and says: 'ipod service' could not be stopped. Verify that you have suffiecient privileges to stop system services.
What does this mean?

that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
iTunes 7.0.2.16 Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
does the install go through properly this time?

I'm getting this error: Service "iPod Service" could not be stopped

Verify that you have sufficient privileges to stop system services." Does anyone know what that means?
Dell Windows 2000

When does this error message appear to you? (i.e., what were you doing that caused it to occur?)
If you're going to Task Manager to stop a Process called "iPodService.exe", you may need to go to an administrator user account on your computer to stop the process in Task Manager, not under a limited-account.
-Kylene

ITunes will not update because 'iPod Service' could not be downloaded.

For many months now I have been trying to update my iTunes on my computer yet whenever the update is being downloaded I recieve an error message that tells me to go to the Tools menu and to download it from there. I do this and try to install the software again but whenever iTunes is in the process of being downloaded I get the message "Service 'iPod Service' (iPod Service) could not be installed. Verify that you have sufficient privileges to install system services." But the thing is I am the administrator on this computer and I get this message everytime. To update I have been uninstalling iTunes and reinstalling it. What can I do to fix this?

To update I have been uninstalling iTunes and reinstalling it.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Ipod service could not be found

ipod service could not be found

Are you saying that an error message says that the Apple Mobile Device Mobile Service is not started when you connect the iPod to your computer? If that is the case see:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Otherwise more clearly describe the problem together with the exact wording of any error messages.

Ipod service could not be installed

Installing update to iTunes on PC and getting error "ipod service could not be installed" and now my ipod shuffle is not being recognized.

steps below worked for me ( windows 7 x86/32bits )
close SysInternals's Process Explorer ( if you have it and it's open )
close all Task Manager(s)
close Windows Services console ( services.msc )
close all command prompts ( cmd.exe )
open a cmd.exe as Admin
run: sc create "iPod Service" binpath= "C:\Program Files\iPod\bin\iPodService.exe"
close all command prompts ( cmd.exe )
open Windows Services console ( services.msc )
look for "iPod Service", see if it's not Disabled. If so, start it
close Windows Services console ( services.msc )
Run iTunes.msi again ( previously downloaded via the Apple Software Update's Only Download function )

Cannot Load iTunes 10.0 Because "iPod service could not be installed".

When I tried to upgrade to iTunes 10.0 I received an error message and was told to uninstall and reinstall iTunes. When I tried to install 10.0 . I got the following error message "Service 'iPod Service' (iPod Service) could not be installed. Verify that you have sufficient privileges to install system services." It then won't let me proceed with the installation. What can I do to install the new version of iTunes?

I have a similar problem when trying to upgrade to iTunes 10. The iPod Services exists but won't start - either automatically or manually. Have uninstalled, deleted, reinstalled following lots of different suggested paths but nothing has resolved it so far. Can no longer synch with iPod or synch photos/video/music with iPad

Bonjour Services could not be stopped

I've had it with the stupid bonjour services. I have searched for countless hours for a solution, and even emailed the head-honchos. But it was "out of their field." A message pops up during installation, and says, "Service 'Bonjour service' (Bonjour Service) could not be stopped. Verify that you have sufficent priviledges to stop system services." Can someone help me???

That can sometimes happen if the BonJour service is jammed in an odd state. Let's check on that.
In your Start menu, right-click "Computer" and select "Manage".
Expand "Services & Applications".
Open "Services".
Maximise the window to better see what is going on.
What is showing up for you next to the BonJour Service under Status and Startup Type? For example, mine says "Started" and "Automatic".

ITunes 7.6 Upgrade Install Fails - "iPod Service could not be installed."

My system:
Windows XP Pro with SP2
Current iTunes version: 7.5.0.20
What I did:
Downloaded latest install exe for iTunes (iTunesSetup.exe)
Ran exe from Start / Run
During the install I receive the following message: "Service 'iPodService' (iPod Service) could not be installed. Verify that you have suffient priliges to install system services."
Note: I am the system administrator.
I abort the install and it rolls back. I restart iTunes. At this time a message box pops up stating "Ipod Service. Could not delete service"
In services I go to iPod Services and it is set to 'Disabled' When I try to set the sevice to Automatic or Manual I can not do so and I get the message: "The specified servoce has been marked for deletion."
I restarted my computer and opened iTunes.
When I run diagnostics in iTunes the Diagnostics file is as follows:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Gateway E-4000
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2008-06-29 09:45:00.
Video Display Information:
NVIDIA GeForce4 MX 440
** iPod Connectivity Tests **
iPodService 7.5.0.20 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel PCI to USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
J (G:\), iPod nano running firmware version 1.3.1
Serial Number: 7R552929TJT
Bus Speed: 61440
So:
How do I get iTunes Helper to run again?
How do I get the iTunes update to version 7.6 to successfully install?
Thank you for your help.

Before reinstalling everything, I'm curious if you've ever used your System Configuration Utility on your computer? Click Start > Run and type msconfig. Click OK. Is the option for 'selective startup' selected? If so, click the Startup tab and make sure iTunesHelper and qttask are selected, and then click the Services tab and make sure iPodService and AppleMobileDevice are selected.
If that is not the case, I would recommend removing everything and reinstalling.
My recommended technique is as follows:
Go into Control Panel > Add/Remove Programs
Remove these applications:
1. Apple Software Update
2. Apple Mobile Device Support
3. iPod for Windows (this may or may not exist, either way, it's not needed so we can remove it)
4. iTunes
5. QuickTime
Restart the computer
Download & Install the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301/
Launch the Utility: Start > Programs > Windows Install Clean Up
Select any of the above mentioned applications, and click Remove
Restart the computer again
Download & install iTunes again from here: http://www.apple.com/itunes/download/
CG

ITunes does not install properly, 'iPod Service' could not be installed

During an iTunes update to latest version. The update failed, I downloaded manually and reinstalled but it still failed. I remove all apple applications from the PC. redownloaded iTunes and reinstalled again. This time I got the message 'Service 'iPod Service'(iPod Service) could not be installed. etc'.
I am an administrator I can install services.
I am using Windows XP Service Pack 3, using Norton Internet Security as a virus protection and firewall. Norton has been installed for 6 months and iTunes has been updating okay until the current update.

I've got the same problem. What's with Apple? You'd think they could send out an update that works. But, that hasn't happened in years. Tell us what to do, Apple! This is ridiculous!

XMII WebService shows error as - SOAP Service could not be loaded: null

Dear Friends,
   I'm doing the xMII <-> XI <-> RFC scenario with the reference of the blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8703. [original link is broken] [original link is broken] [original link is broken] I just create an asyncronous scenario. Sender with SOAP adapter and receiver with RFC adapter. After creating the WSDL file from the scenario, I stored it in the xMII server path D:XISendere10099xMII_integration_1_Outbound_MI.wsdl. Then in the WebService action block of xMII BLT, I gave the URL as this file path, user name and password of XI server and click Next. Then I got the error message as SOAP Service could not be loaded: null.
   Please give the solution for this issue.
Regards,
Jagan.

Dear Selvam,
   Actually I checked those things already. Everything is fine. I executed already HTTP <-> XI <-> xMII scenario and it was working fine. I checked with SendSMS.wsdl file now. That is also working fine. I am attaching the WSDL file, which I am using, for reference. This file is working fine in SOAPSonar and data posted in SAP R/3 table. But it is showing the error in xMII as "SOAP Service could not be loaded: null".
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="xMII_integration_1_Outbound_MI" targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:p1="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><wsdl:types><xsd:schema targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:element name="xMII_integration_1_Outbound_MT" type="xMII_Integration_1_Out_DT" /><xsd:complexType name="xMII_Integration_1_Out_DT"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">750324e0438311ddad100019bb528b1e</xsd:appinfo></xsd:annotation><xsd:sequence><xsd:element name="Vendor" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d01b6611dd8de7001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Name" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d11b6611dd8b8e001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Street" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d21b6611ddcc29001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="City" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d31b6611dd8303001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Dist" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d41b6611ddcd00001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Country" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d51b6611dd9fa5001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element></xsd:sequence></xsd:complexType></xsd:schema></wsdl:types><wsdl:message name="xMII_integration_1_Outbound_MT"><wsdl:part name="xMII_integration_1_Outbound_MT" element="p1:xMII_integration_1_Outbound_MT" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /></wsdl:message><wsdl:portType name="xMII_integration_1_Outbound_MI"><wsdl:operation name="xMII_integration_1_Outbound_MI"><wsdl:input message="p1:xMII_integration_1_Outbound_MT" /></wsdl:operation></wsdl:portType><wsdl:binding name="xMII_integration_1_Outbound_MIBinding" type="p1:xMII_integration_1_Outbound_MI" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:operation name="xMII_integration_1_Outbound_MI"><soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:input><soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:input></wsdl:operation></wsdl:binding><wsdl:service name="xMII_integration_1_Outbound_MIService"><wsdl:port name="xMII_integration_1_Outbound_MIPort" binding="p1:xMII_integration_1_Outbound_MIBinding" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:address location="http://aprins07:8010/XISOAPAdapter/MessageServlet?channel=:A_Test:xMII_Integration_1_xMII_Sender_CC&version=3.0&Sender.Service=A_Test&Interface=http%3A%2F%2Fwww.xxx.com%2FXIBatch3%2F10099%2FxMII_Integration_1%5ExMII_integration_1_Outbound_MI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:port></wsdl:service></wsdl:definitions>
Regards,
Jagan.

System error 3 OracleDBConsoleorcl service could not be started.

Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
From the cmd prompt,I type emctl start dbconsole.
C:\Documents and Settings\JOEY>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://127.0.0.1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
I don’t understand why the default loopback (127.0.0.1) is being used.
How do I solve this?
Thanks.

Thanks zekeriya but unfortunately using
emca -dbconfig dbcontrol db
does not help.
The system error 3 still appears.
Thanks.

Itunes pulls up error stating that ipod service could not be stoped

I got an ipod for christmas and i cant use it because when I go to download the ItunesSetup it says that i have to verify that I have sufficient privileges to stop system services and I dont know how to fix it

FYI - I'm having the same problem. At first, I loaded iTunes successfully, but got a generic pop-up windows error message "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I tried the "repair" option from the website and thats were I got the ipod services message.
I noticed my Windows XP was service pack 1 so I loaded Service Pack 2... then I reloaded iTunes and still get the same generic error message.
There has got to be an easy answer, lets hope someone can find it for us.

Error 1921 acrobat update service could not be stopped upgrading from 9 to 10 or 11

The installers uninstall 9, looks like it's about done, then is trying to stop adobe ARM service and can't so it fails. I've run the AdbeArCleaner to try to get a fresh start, but it seems like I've broken something, and I hate being stuck 2 versions behind...

How about this workaround-
Download AdbeRdr11000_en_US.msi from ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/
execute the command below:
msiexec /i [Path to AdbeRdr11000_en_US.msi] DISABLE_ARM_SERVICE_INSTALL=1
DISABLE_ARM_SERVICE_INSTALL property described here
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/properties.html?highlight=arm %20service
Without Service you will not be able to install updates in full auto mode (depends on your OS and UAC), but you sill be able to update in other modes.

Error 1921 Ipod Service could not be stopped

Similar Messages

Maybe you are looking for