Error 193, running DISM in Windows after images is applied

Hi
I have an issue with dism on a new image I have applied to multiple computers. I had planed to run a dism command in a script, but no matter what dism command I try to run I get
Error 193. It is on Windows 7 Professional x64 bit.
In C:\Windows\Logs\Dism\dism.log I get an error saying:
DismHostLib: Failed to create dismhost.exe servicing process.
Any ideas on what is causing this failure?
Thomas | MCP | http://www.techwork.dk

Hi,
This article may helpful to you:
http://www.advancedpctweaker.com/exe-errors/DismHost.exe.html
By the way, did this issue only occur when you run the script? Could you use DISM within command?
Try to run SFC /Scannow also:
http://support.microsoft.com/kb/929833
Hope that helps.
Regards,
Leo Huang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Leo Huang
TechNet Community Support

Similar Messages

New Output Module install generates an i/o error when running even on a single image.

Adobe *had* removed the Output Module from Bridge, and I see now there is a (tedious) "manual" install to "reinstate" the module available online, but it is not functional. It generates an i/o error when running even on a single image.

I'm afraid this is not helping the OP
There are already to many having this I/O problem showing in several other threads and in this forum there is still no solution found. Can you pass this on to Adobe Tech please?
Thanks

Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Hello.
I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.
DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
relevant bits from it seem to be:
Checking System Update Readiness.
(p)   CSI Payload Corrupt           amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)   CSI Payload Corrupt           amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.
Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:   2
   CBS Manifest Corruption:   0
   CBS Metadata Corruption:   0
   CSI Manifest Corruption:   0
   CSI Metadata Corruption:   0
   CSI Payload Corruption:   2
Total Repaired Corruption:   0
   CBS Manifest Repaired:   0
   CSI Manifest Repaired:   0
   CSI Payload Repaired:   0
   CSI Store Metadata refreshed:   True
In adition, my windows 8 will not carry out a scheduled maintenance session.
Is this something I can repair. Any help would be appreciated. The setup event logs mentions 2 errors, so presumably this is the issue.

Use the "source" option to specify the location of the files that are required to restore the feature."
If we read the documentation, we might infer we can use any existing WinSxS as source?
http://technet.microsoft.com/en-us/library/hh825265.aspx
<quote>
You can restore and enable a feature that has previously been removed from the image. Use the
/Source argument to specify the location of the files that are required to restore the feature. The source of the files can by the Windows folder in a mounted image, for example c:\test\mount\Windows. You can also use a Windows side-by-side
folder as the source of the files, for example z:\sources\SxS.
If you specify multiple /Source arguments, the files are gathered from the first location where they are found and the rest of the locations are ignored. If you do not specify a
/Source for a feature that has been removed, the default location in the registry is used or, for online images, Windows Update (WU) is used.
Use /LimitAccess to prevent DISM from contacting WU for online images.
</quote>
That quote was actually from under the /Enable-Feature operand but the /Source: operand has wider scope.
Compare the briefer description of the same operand given later under the /Cleanup-Image operand
<quote>
Use /Source with /RestoreHealth to specify the location of known good versions of files that can be used for the repair, such as a path to the Windows directory of a mounted image.
If you specify multiple /Source arguments, the files are gathered from the first location where they are found and the rest of the locations are ignored. If you do not specify a
/Source for a feature that has been removed, the default location in the registry is used or Windows Update (WU) is used for online images.
Use /LimitAccess to prevent DISM from contacting WU for repair of online images.
</quote>
Does this mean the functionality is limited or that they were just trying to avoid being redundant?   ; }
Good luck
Robert Aldwinckle

Error 193: 0xc1 when starting windows service

Hello,
I see there is another related question, however I do not understand what 'dependent services' are and cannot check these.
I am trying to start MySql service and I receive the error
Windows could not start the MySql56 service on the local computer.
Error 193:0xc1
I should also note that when I start windows, I receive this message:
There is a file or folder called "c:\Program" which could cause certain applications to not function correctly. Renaming it to "c:\Program1" would solve this problem
I don't know if these issues are related.
Thank you.

Hello Susie,
Thank you for your reply.
Yes, MySql is running as a windows service. C: has been scanned and threats removed.
This difficulty occurred after trying to reset a forgotten root password after installing MySql for
the first time.
I will continue to try other methods of removing the error, but if you or others have other suggestions
I would appreciate it.
I thought that a system restore/reinstall might work, but it did not.
Thank you again,
Melle

Fatal error while running sysprep on Windows 7

Ok, so I spent 2 weeks building this Windows 7 image, which now seems to be doing everything almost exactly as I want it. I have my unattend.xml file that I've built for past images that I copied onto this machine, and I ran sysprep with the /generalize
and /oobe flags. I get the above error once it gets into the generalize phase.
The log has the following interesting lines:
WindowsSideShow: Failed to get task folder (0x80070002)
LaunchDll:Failure occurred while executing 'C:\Windows\System32\AuxiliaryDisplayClassInstaller.dll,WindowsSideShow_Sysprep_Generalize', returned error code 31
So, I apparently unwittingly installed some Microsoft network-aware application that either doesn't support or is thoroughly confused by the Sysprep_Generalize command. Fortunately, I have enough experience with Windows to know you make a full disk
image before running a command that can so easily ruin all your hard work. Even though I only waste 20 minutes each time I have to restore an image, it's still frustrating dealing with such an obscure error. Asking The Google only shows obscure
recommendations about rearms (not the issue here) or disabling the Windows Media Player Network sharing service (or something similar....also not the issue here). I could just remove the above mentioned DLL from the generalize steps in the registry,
but I'd like to solve the root problem so my image isn't hiding a sleeper bug.

Hi,
If this is not an issue with rearm, please delete keys under this path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize\
And then run sysprep again to check how it works.
Alex Zhao
TechNet Community Support

Error while running Enterprise Manager 11gR1 after installation

Dear All,
I have just installed Oracle 11gR1 on centOS 5 operating system. During installation I checked the option to create sample schema. During installation the installer displayed some error message regarding Enterprise Manager and told that you can run the script manually after installation is complete with the script location i.e /<oracle_home>/bin/emca
After installtion i have run the script BUT now when i try to start dbconsole it fails.
When i run emctl status agent it says agent is not running.
Following is from emagent.trc file
2009-03-01 20:44:26 Thread-3047507648 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 20:44:26 Thread-3047507648 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 20:44:26 Thread-3047507648 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 20:44:26 Thread-3047507648 WARN main: clear collection state due to OMS_version difference
2009-03-01 20:44:26 Thread-3047507648 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 20:44:26 Thread-3047507648 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 20:44:26 Thread-3047507648 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 21:37:17 Thread-3086870208 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 21:37:17 Thread-3086870208 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 21:37:17 Thread-3086870208 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 21:37:17 Thread-3086870208 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 21:37:17 Thread-3086870208 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 21:37:17 Thread-3086870208 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 21:42:09 Thread-3086194368 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 21:42:09 Thread-3086194368 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 21:42:09 Thread-3086194368 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 21:42:09 Thread-3086194368 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 21:42:09 Thread-3086194368 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 21:42:09 Thread-3086194368 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 22:14:44 Thread-3086542528 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 22:14:44 Thread-3086542528 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 22:14:44 Thread-3086542528 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 22:14:44 Thread-3086542528 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 22:14:44 Thread-3086542528 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 22:14:44 Thread-3086542528 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
And this is from the emagent.log file
2009-03-01 20:44:26 Thread-3047507648 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 20:44:26 Thread-3047507648 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 21:37:17 Thread-3086870208 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 21:37:17 Thread-3086870208 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 21:42:09 Thread-3086194368 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 21:42:09 Thread-3086194368 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 22:14:44 Thread-3086542528 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 22:14:44 Thread-3086542528 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
Kindly help me in starting Enterpeise Manager 11gR1.
Regards, Imran

Dear All,
These are the messages/errors when I try to re-create OEM Repository.
Do you wish to continue? [yes(Y)/no(N)]: Y
02-Mar-2009 10:23:11 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log.
02-Mar-2009 10:23:11 oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...
02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
02-Mar-2009 10:26:04 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
02-Mar-2009 10:26:05 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
02-Mar-2009 10:26:32 oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
02-Mar-2009 10:26:33 oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
02-Mar-2009 10:26:33 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
02-Mar-2009 10:26:38 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
02-Mar-2009 10:26:38 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
02-Mar-2009 10:29:58 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /Oracle/app/oracle/product/11.1.0/db_1/bin/emctl start dbconsole
02-Mar-2009 10:29:58 oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
Could not complete the configuration. Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
Does it give some hint. I have try to publish all the information i could get.
Regards, Imran

Application Errors when running iTunes in Windows 7

I am getting the following Errors in Windows when running iTunes 9. Seems to only occur when I want to view anything in the iTunes store or when listening to any music in my library that was purchased from the store.
- I have removed and reinstalled the product.
- I have been successful in replicating this issue on 2 other Windows 7 and Vista machines.
- I am running the Windows 7 Pro RTM 32bit (not the RC or Beta) and Vista Business SP2. All 3 machines worked fine before the upgrade to iTunes 9.
Log Name: Application
Source: Application Error
Date: 9/16/2009 8:41:38 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: XXXXXXXXXXXXX
Description:
Faulting application name: iTunes.exe, version: 9.0.0.70, time stamp: 0x4aa72598
Faulting module name: iTunes.dll, version: 9.0.0.70, time stamp: 0x4aa7257d
Exception code: 0xc0000005
Fault offset: 0x0083d68a
Faulting process id: 0x1028
Faulting application start time: 0x01ca36caf8f662ba
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:38.000000000Z" />
<EventRecordID>2098</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>1028</Data>
<Data>01ca36caf8f662ba</Data>
<Data>C:\Program Files\iTunes\iTunes.exe</Data>
<Data>C:\Program Files\iTunes\iTunes.dll</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 9/16/2009 8:41:40 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: DTKB
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.0.0.70
P3: 4aa72598
P4: iTunes.dll
P5: 9.0.0.70
P6: 4aa7257d
P7: c0000005
P8: 0083d68a
P9:
P10:
Attached files:
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5
Analysis symbol:
Rechecking for solution: 0
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Report Status: 1
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:40.000000000Z" />
<EventRecordID>2099</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml</Data>
<Data>C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5</Data>
<Data>
</Data>
<Data>0</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
<Data>1</Data>
</EventData>
</Event>
--------------------------------------------------------------

Hummmmmm,
I had similar problem today with a laptop with Itunes / Vista
The issue occured when it was connected to the internet. Error message is related to Itunes.dll in the event viewer, and Itunes crashed.
I fixed it by checking the internet options / connection. Just make sure to have unchuck all proxy related option if you are directly connected to the internet.
Tell me if it fixed the issue.
Itunes crashed because it tried to use a proxy setting that was configured but not set to any adress (there was a blank line).

Startup error message while starting up Windows after installing NI Circuit Design Suite 10

Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date:  12-01-2008
Time:  13:17:54
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date:  12-01-2008
Time:  13:18:51
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date:  12-01-2008
Time:  13:21:33
User:  N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20   Bucket:
0008: 36 31 39 39 39 37 36 37   61999767
0010: 32 0d 0a                  2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date:  12-01-2008
Time:  13:18:12
User:  N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.

Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM

Photos Not Syncing; Photos Missing From Albums, No Error Message, Running iTunes for Windows & iOS 7.1.2

I am having an issue with syncing my photos on my iOS devices running iOS 7.1.2, the two being an iPhone 4s and iPad 2 Wi-Fi + 3G.
When I sync photos, I keep on having photos turn up missing from entire albums. I have tried everything I can to resolve this issue from the support article titled <a href="http://support.apple.com/kb/TS3697">iTunes: Unable to sync photos</a>, and nothing has successfully worked in any kind of permanent form. I have even gone so far as to sync albums individually with a limit of around 400-500 total photos per sync, (give or take), and tried using what very little options I have on the photos tab for my devices in iTunes to essentially trick the devices to sync the missing photos. Despite this, iTunes still fails to sync newly added photos from the source location.
I have even made the attempt of re-installing iOS 7 on both devices, and restoring from backup. Again with no avail.
My best guess for my iPhone is that as it is a 16 GB, not all of 15.6 GB of photos will sync to the device, (go figure), but that doesn't explain why recent photos aren't added OR why my iPad 2 of 64 GB has missing photos.
As of this post, I have an estimated 38,940 files, spread across 1,703 folders, (a large amount of folders being in some of the folders; from my knowledge never being more than two folders in). They are all in one dedicated folder on a hard drive I've dedicated to iTunes and music related files, (for the sake of AVOIDING this kind of nonsense, I might add).
As for the system OS and iTunes, I am running Windows 7 64 bit, and I am using iTunes 11.2.2.3, but will have updated to iTunes 11.3 by the time anyone responds.

I have the exact same problem.
Same kind of photos/videos taken with the same camera randomly sync.
Did 11.3 fix this issue?
Sincerely

Syntax Error while running step 34 (35) after unicode conversion

Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR      2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103]           CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH                                 [abgen.c      1388]
A *** ERROR => > Include LBTCHF39                                 line 173 [abgen.c      1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c      1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC                                 [abgen.c      1388]
A *** ERROR => > Include LSALCU54                                 line 55 [abgen.c      1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c      1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno      60
sid        S01
systemid   274 (HP (IA-64) with HP-UX)
relno      6400
patchlevel 0
patchno    258
intno      20020600
make:      single threaded, Unicode, 64 bit
pid        20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA     640     0021     SAPKA64021
SAP_BASIS640     0021     SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus Hellsing

Hello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 4
      (row 30 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39                   |0000014869      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(CNV) WARNING: code page conversion problem
               Number of substitutions: 2
      (row 41 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32                   |0000021982      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 1
      (row 3519 of current buffer, table SFIWP)
LANGU 4a                                              |J               |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B        |
WORDF 20 20 20 20 20 20 20 20                         |                |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing

2012 R2 Essentials Windows Update error 80072EE2 and Dism errors 0x800f0906 and 0x800f081f

Since 11/2014 our R2 Essentials server on ESXI has been unable to run Windows Update, returning error 80072EE2. I ran the Windows Update troubleshooter which claimed it fixed something, but Windows Update returned the exact same error again. There are no
proxies or Internet access problems. I have ensured no firewall is blocking Windows Update URLs. So I tried the
sfc /scannow command which reports a file that cannot be repaired:
2015-01-12 20:56:41, Info CSI 00000801 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
For this error others suggested running dism /Online /Cleanup-Image /ScanHealth which on my server tells me "The component store is repairable." So next I run
Dism /Online /Cleanup-Image /CheckHealth which instantly returns the same result that it is repairable. Next I run
DISM.exe /Online /Cleanup-image /Restorehealth thinking this will fix it, but it returns this error: "Error 0x800f0906 source files could not be downloaded".
Articles suggest I use a different source, so I mount the R2 Essentials DVD used to install this server to drive letter Z: and use this command:
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:Z:\sources\sxs /LimitAccess
This results in the error "Error 0x800f081f source files could not be found" and so I copy the sources\sxs folder locally to C: and re-run the last command pointing to this new location. I get the same error.
I have run chkdsk and I have tried rebooting between each of the above commands, which did not work. I have run all these commands as Administrator.
Does anyone know what I do next? I see references to these errors with several users attempting to install .NET framework but those solutions do not apply to my situation.
As a next step I considered uninstalling the last successfully installed Windows update (KB3011780) on this machine in case it broke something. Thoughts?

Hi,
Please refer to following KB and reset Windows Update components, then check if can help you to solve this issue.
How do I reset Windows Update components?
In addition, did you check relevant log files (such as: DISM.log, CBS.log or others) whether find more clues?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years.
I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed. Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services. It seems that this might be rectified by plugging in said devices before finishing the re-install. The second reads iTunesHelper was not installed correctly please re-install iTunes. This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows. However, after re-installing again, it still won't run and the original error comes back. I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable.

Error on running JVM from a C program

Hello there!!
I'm using Open Watcom as a C compiler on Windows XP. I'm trying to run a JVM from a C program.
I have specified the following as a library file :
C:\Java\jdk1.5.0_04\lib\jvm.lib
The code compiles very well, but I'm getting an error when running it.
Windows tells me the following :
"The entry point of the function ??_7VM_GetCurrentLocation@@6B@ can't be found in jvm.dll dynamic linking library"
The code I've been trying to run is the following one :
#include <jni.h>
#include <stdio.h>
#include <stdlib.h>
void main()
JavaVMOption options[3];
JavaVMInitArgs vm_args;
JavaVM *jvm;
JNIEnv *jenv;
long result;
jmethodID mid;
jfieldID fid;
jobject jobj;
jclass cls;
int asize;
printf("coucou\n");
getchar();
options[0].optionString = ".";
options[1].optionString = "-Djava.compiler=NONE";
options[2].optionString = "-verbose:jni";
vm_args.version = JNI_VERSION_1_2;
vm_args.options = options;
vm_args.nOptions = 3;
vm_args.ignoreUnrecognized = JNI_FALSE;
JNI_GetDefaultJavaVMInitArgs(&vm_args);
result = JNI_CreateJavaVM(&jvm,(void **)&jenv, &vm_args);
/* if(result == JNI_ERR )
printf("Error invoking the JVM");
exit (-1);
cls = (*jenv)->FindClass(jenv,"C:\Formation\Joly\FromCtoJava\WATCOM\samples\ide\win32\FromCtoJava");
/* if( cls == NULL )
printf("can't find class FromCtoJava\n");
exit (-1);
(*jenv)->ExceptionClear(jenv);
mid=(*jenv)->GetMethodID(jenv, cls, "<init>", "()V");
jobj=(*jenv)->NewObject(jenv, cls, mid);
fid=(*jenv)->GetFieldID(jenv, cls, "arraySize", "I");
asize=(*jenv)->GetIntField(jenv, jobj, fid);
printf("size of array is %d",asize);
(*jvm)->DestroyJavaVM(jvm);*/
Cheers
Joly

I already did PATH.
Open a console window.
Explicitly set PATH to point ONLY to the appropriate java directory (where the dll is and executable) using something like the following
set PATH=C:\xxx\yyy
Then run your app again in the console window - no where else.

Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

From results.xml:
<?xml version="1.0"?>
<Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Apply Windows PE.
Unknown error (Error: 00001550; Source: Unknown)
The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
Unknown error (Error: 00001550; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

Here is the second part of BDD.log:
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Error 193, running DISM in Windows after images is applied

Similar Messages

Maybe you are looking for