Error 1933 Installing NI-DAQ 7.4.4;

This is the error I receive when trying to install the driver software:
The traditional NI-DAQ 7.4.4 installation has failed with the following error ERROR 1933. 
The windows installer service cannot update one or more protected windows file.
Thanks EJuniorR

Hello EJuniorR,
Thanks for contacting National Instruments.  I am assuming you are using Windows XP.  Traditional DAQ is currently not supported on Windows Vista. 
The error you have experienced is a Microsoft installer error.  An explanation of the error can be found on the Microsoft website.  It seems that most of the information regarding this error is program specific, the most common being located here. 
All of the National Instruments installers use the Microsoft installer utility.  Please ensure that you have the latest version of the utility.  Also make sure that you have administrator rights on the computer.  You can also consider running the installer cleanup utility to remove old Window’s Installer configuration information. 
Also make sure to download the installer to the hard disk and then run it.  There have been install errors associated with running the install file directly from the website. 
Please post back if you have any questions or concerns. 
Message Edited by BrowningG on 10-12-2007 04:10 PM
Regards,
Browning G
FlexRIO R&D

Similar Messages

  • Error when install NI-DAQ 7.4

    When I install NI-DAQ 7.4 I got this message : ''Developer Erorr :The following errors where found in your ini file :
    1. Specified file not found: [MsiEngine] Win9xPath = suppfiles\instmsia.exe
    2. Specified file not found: [MsiEngine] WinNTPath = suppfiles\instmsiw.exe
    Exception code: E06D7363 ()
    Fault address:  77E738B2 0001:000128B2 C:\WINDOWS\system32\kernel32.dll ''
    Can anyone help me to install this software???....... please.
    Note: I had Traditional NI-DAQ (Legacy) Version 6.9.2 but I uninstall it because it does not support the NI DAQ Assistant.

    Hello rammo,
    Are you trying to install this from a cd or did you download the file from our website?
    If it is from a cd, I would recommend copy the contents of your cd to your hard drive and then installing it from there.
    If it is from our website, I would try to download it again, or try the
    installation on a nother computer.  It is possible that the file
    somehow became corrupted when you were trying to download it.
    Just out of curiosity, are you installing NI-DAQ 7.4 Traditional?  If you want the newest version of NI-DAQmx, it is version 7.5!
    Eric
    DE For Life!

  • Error 1406 when installing Ni-DAQ 6.8.1

    Hi,
    I get and error 1406 when trying the install Ni-DAQ 6.8.1 on a Winfows 95
    machine. Registry key access is not being allowed when the installation
    tries to update the registry keys
    Any ideas what causes this. I can find no reference to this error code
    Thanks
    Neville.

    Neville;
    There is a limit to the number of entries in the HKLM\Software\Microsoft\Windows\CurrentVersion\SharedDLLs key, at least on Win95. By removing some other entries, the problem will probably be solved.
    Hope this helps.
    Filipe Altoe
    Applications Engineer
    National Instruments

  • MAX error after installing NI DAQ7.0 on Labview6.i

    Hello,
    I'm working with LV6.i. I recently bought a new PCI-6534 card. This card isn't compatible with Ni Daq6.8 installed with LV6.i, so I changed it by Ni Daq7.0. No problems during installation (in comparison with early attemptions to install Ni Daq 6.9.3 with as result: errors in MAX, no daq icones in LV). No problems in LV; daq icones are still available. But when I open MAX, I get an error involving a read instruction to memory: "LabWindows/CVI: NiMax.exe - error".
    I had installed LabWindows on my pc a couple of weeks ago, but I uninstalled it later on.
    How can I resolve this problem?
    kind regards,
    Kevin Van de Gaer

    I think 7.0 is actually DAQmx and the message you are seeing seems to confirm that. I'm not sure why MAX would have an error but you cannot use DAQmx with LabVIEW 6. You need the driver that is now called Traditional NI-DAQ. The latest version is 7.4.4

  • 'CRT not initialized' error after installing MS Office 2010

    Hi,
    I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
    - OS : windows 7 Enterprise (32bit)
    - Labwindows/CVI (v12.0.0 (422))
    - MS Office 2010 (word, powerpoint, excel)
    #1. clean install windows 7 (32 bit)
    #2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
    #3. compile and run attached test program : SUCCESS
    #4. online update windows 7 (service pack, explorer 9, and etc)
    #5. compile and run attached test program : SUCCESS
    #6. install MS Office 2010
    #7. compile and run attached test program : 'CRT error'
    #8. uninstall MS Office 2010
    #9. compile and run attached test program : SUCCESS
    I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
    Thank you in advance.
    Attachments:
    step7-CRT error.jpg ‏31 KB
    test program.zip ‏3305 KB

    More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
    To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
    Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
    Could you tell me why this problem occur?

  • Error while installing OWB

    Error while installing OWB
    after 50% install.. it says
    "Error in writing to file c:\oracle\ora9201\bin\oci.dll
    The process cannot access the file because it is being used by another process"
    Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
    Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?

    Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
    This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
    The first note I wrote back before 2000.
    Barry

  • Error while installing Oracle 10g on Fedora Core 1

    Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
    We have tried by using the on-line procedure and changing the required script to make believe it as said.

    Are you createing DB also???

  • Error while installing SQL Server 2012 X64 SP2,

    Error while installing SQL Server 2012 X64 SP2,
     When I installed the SQL Server 2012 X64 SP1, I got the attached error.
     What might be the issue here?
     Thank you
     Best
    Jamal

    Hello,
    Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
    Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
    Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error while installing the NerWeaver Platform

    Error While installing the NetWeaver Instance
    Posted: Nov 22, 2004 2:37 PM        Reply      E-mail this post 
    When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
    MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
    The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
    For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
    Please help me out the error.

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

  • Error while installing gateway please help soon

    Error while installing gateway in
    Microsoft Windows Server 2003.
    error while installing gateway
    E:\idm\gateway>gateway -i
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,150): trace active, level: 4, file: E:\\IDMLOGS\\gateway.log, maxSize: 10240 KB
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,108): In WSTrace::init()
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,109): Gateway version: 'Sun Java System Identity Manager 7.1'
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,110): OS version: 'Windows Server 2003 Family Service Pack 1 (Build 3790)'
    An error occured when trying to install the service: No error
    E:\idm\gateway>

    Use that MS installer cleanup to get rid of iTunes first, then QuickTime.
    Actually, I should back up. Go to the article I link below, and scroll down to the section
    *General Installation Troubleshooting*
    Important: A majority of customers experience successful iTunes installation after completing these troubleshooting procedures. If one does not help, proceed to the next.
    -Completely Remove iTunes and QuickTime (Click to show)
    -Empty your Temp directory and restart (Click for more)
    -Clean up iTunes installer files on the computer (Click for more)
    -Download QuickTime Standalone Installer (Click for more)
    -Disable other conflicting software (Click for more)
    -Make sure your folder names don't contain strange characters (Click for more)
    http://docs.info.apple.com/article.html?artnum=93976

  • Error while installing J2EE Add- In to the ABAP system

    Error while installing J2EE Add-In to the ABAP system 
    We are installing J2EE Add-In to the ECC5 System in the new hardware.
    When are getting Error while installing J2EE Add-In to the ABAP system.
    Transaction Begin*****************************
    ERROR 2005-08-10 14:58:28
    CJSlibModule::writeLogEntry()
    CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
    configuring J2EE Engine. See output of
    logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
    is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
    ElementInfoTask has finished successfully on dispatcher
    ConsoleLogsTask has finished successfully on dispatcher
    ChangeManagerPropsTask has finished successfully. Manager:
    LockingManager on dispatcher
    ChangeManagerPropsTask has finished successfully. Manager:
    ClusterManager on dispatcher
    ElementInfoTask has finished successfully on server
    ConsoleLogsTask has finished successfully on server
    ChangeManagerPropsTask has finished successfully. Manager:
    LockingManager on server
    ChangeManagerPropsTask has finished successfully. Manager:
    ClusterManager on server
    ChangeServicePropsTask has finished successfully. Service: dbpool on
    server
    ChangePasswordsTask finished successfully.
    Error occured while connecting to database (UploadFile). Msg: No such
    algorithm: DESede
    Transaction end***********************************
    We tried twice clean installation, after removing j2ee dir, SCS and
    resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
    I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
    We are getting the same error in both tries.
    Kindly advice us to resolve the problem.
    Thanks and Regards,
    Srinivas

    Ananda,
    you saved my day!  I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation.  I had tried deleting the schema first, but that didn't work.  After I removed the sys\global\security folder as well, it worked perfectly.
    Thank you.

  • Error in installing 10.2.0.4

    Hi Experts,
    I have been using Oracle 10.2.0.3 in windows 7 machine, which has three databases.
    When I tried to upgrade it to 10.2.0.4, I got an error when installing the patch 10.2.0.4 stating
    *"OUI-10091: There are no patches that need to be applied from the patchset Oracle Database 10g Release 2 Patch Set 3 10.2.0.4."*
    I have searched forum and google for this error most of the solution says "it may be because of corrupted software" but actually it was working and I have used it previously.
    Then I checked the following things in my database:
    SQL> select banner from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    SQL> select comp_name,version,status from dba_registry;
    COMP_NAME                      VERSION    STATUS
    Oracle Enterprise Manager      10.2.0.3.0 VALID
    Spatial                        10.2.0.3.0 VALID
    Oracle interMedia              10.2.0.3.0 VALID
    OLAP Catalog                   10.2.0.3.0 VALID
    Oracle XML Database            10.2.0.3.0 VALID
    Oracle Text                    10.2.0.3.0 VALID
    Oracle Expression Filter       10.2.0.3.0 VALID
    Oracle Rules Manager           10.2.0.3.0 VALID
    Oracle Workspace Manager       10.2.0.1.0 VALID
    Oracle Data Mining             10.2.0.3.0 VALID
    Oracle Database Catalog Views  10.2.0.3.0 VALID
    Oracle Database Packages and T 10.2.0.3.0 VALID
    ypes
    JServer JAVA Virtual Machine   10.2.0.3.0 VALID
    Oracle XDK                     10.2.0.3.0 VALID
    Oracle Database Java Packages  10.2.0.3.0 VALID
    OLAP Analytic Workspace        10.2.0.3.0 VALID
    Oracle OLAP API                10.2.0.3.0 VALID
    OPatch Version
    C:\oracle\test\mine\10.2.0\db_1\OPatch>opatch lsinventory
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation.  All rights reserved..
    Oracle Home       : C:\oracle\test\mine\10.2.0\db_1
    Central Inventory : C:\Program Files\Oracle\Inventory
    from           : n/a
    OPatch version    : 10.2.0.3.0
    OUI version       : 10.2.0.3.0
    OUI location      : C:\oracle\test\mine\10.2.0\db_1\oui
    Log file location : C:\oracle\test\mine\10.2.0\db_1\cfgtoollogs\opatch\opatch201
    +2-05-04_12-33-22PM.log+
    Lsinventory Output file location : C:\oracle\test\mine\10.2.0\db_1\cfgtoollogs\o
    patch\lsinv\lsinventory2012-05-04_12-33-22PM.txt
    Installed Top-level Products (2):
    Oracle Database 10g                                                  10.2.0.3.0
    Oracle Database 10g Release 2 Patch Set 4                            10.2.0.5.0
    There are 2 products installed in this Oracle Home.
    There are no Interim patches installed in this Oracle Home.
    OPatch succeeded.
    Is the error because the OPatch show that I installed Patch Set 4 10.2.0.5.0, is this a problem?
    Can anyone tell me, why am I getting this error?
    Thanks,
    NONUDAY

    Hi Srini,
    This is the output for OPatch lsinventory -detail..
    C:\oracle\test\mine\10.2.0\db_1\OPatch>OPatch lsinventory -detail
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation. All rights reserved..
    Oracle Home : C:\oracle\test\mine\10.2.0\db_1
    Central Inventory : C:\Program Files\Oracle\Inventory
    from : n/a
    OPatch version : 10.2.0.3.0
    OUI version : 10.2.0.3.0
    OUI location : C:\oracle\test\mine\10.2.0\db_1\oui
    Log file location : C:\oracle\test\mine\10.2.0\db_1\cfgtoollogs\opatch\opatch201
    2-05-07_11-40-53AM.log
    Lsinventory Output file location : C:\oracle\test\mine\10.2.0\db_1\cfgtoollogs\o
    patch\lsinv\lsinventory2012-05-07_11-40-53AM.txt
    Installed Top-level Products (2):
    Oracle Database 10g 10.2.0.3.0
    Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
    There are 2 products installed in this Oracle Home.
    Installed Products (211):
    Agent Required Support Files 10.2.0.3.0
    Agent Required Support Files Patch 10.2.0.5.0
    Assistant Common Files 10.2.0.3.0
    Assistant Common Files Patch 10.2.0.5.0
    Bali Share 1.1.18.0.0
    Bali Share 1.1.19.0.0
    Buildtools Common Files 10.2.0.1.0
    Buildtools Common Files 10.2.0.5.0
    Character Set Migration Utility 10.2.0.3.0
    Character Set Migration Utility Patch 10.2.0.5.0
    Database Configuration and Upgrade Assistants 10.2.0.3.0
    Database Configuration and Upgrade Assistants Patch 10.2.0.5.0
    Database SQL Scripts 10.2.0.3.0
    Database SQL Scripts Patch 10.2.0.5.0
    Database Workspace Manager 10.2.0.1.0
    Database Workspace Manager 10.2.0.5.0
    DBJAVA Required Support Files 10.2.0.3.0
    DBJAVA Required Support Files Patch 10.2.0.5.0
    Enterprise Edition Options 10.2.0.1.0
    Enterprise Manager Agent Core 10.2.0.3.0a
    Enterprise Manager Agent Core Patch 10.2.0.5.0a
    Enterprise Manager Agent DB 10.2.0.3.0
    Enterprise Manager Agent DB 10.2.0.5.0
    Enterprise Manager Baseline 10.2.0.3.0
    Enterprise Manager Baseline 10.2.0.5.0
    Enterprise Manager Common Core Patch 10.2.0.5.0a
    Enterprise Manager Common Files 10.2.0.3.0a
    Enterprise Manager Minimal Integration 10.2.0.1.0
    Enterprise Manager Minimal Integration 10.2.0.5.0
    Enterprise Manager plugin Common Files 10.2.0.1.0
    Enterprise Manager plugin Common Files 10.2.0.3.0
    Enterprise Manager plugin Common Files Patch 10.2.0.5.0
    Enterprise Manager Repository Core 10.2.0.3.0a
    Enterprise Manager Repository Core patch 10.2.0.5.0a
    Enterprise Manager Repository DB 10.2.0.3.0
    Enterprise Manager Repository DB 10.2.0.5.0
    Generic Connectivity Common Files 10.2.0.3.0
    Generic Connectivity Common Files Patch 10.2.0.5.0
    HAS Common Files 10.2.0.3.0
    HAS Common Files Patch 10.2.0.5.0
    HAS Files for DB 10.2.0.3.0
    HAS Files for DB Patch 10.2.0.5.0
    Installation Common Files 10.2.0.3.0
    Installation Common Files Patch 10.2.0.5.0
    Installer SDK Component 10.2.0.3.0
    Installer SDK Component 10.2.0.5.0
    iSQL*Plus 10.2.0.3.0
    iSQL*Plus 10.2.0.5.0
    JDBC Common Files 10.2.0.1.0
    JDBC Common Files 10.2.0.5.0
    LDAP Required Support Files 10.2.0.3.0
    LDAP Required Support Files Patch 10.2.0.5.0
    OLAP SQL Scripts 10.2.0.3.0
    OLAP SQL Scripts Patch 10.2.0.5.0
    Oracle Administration Assistant for Windows 10.2.0.3.0
    Oracle Administration Assistant for Windows Patch 10.2.0.5.0
    Oracle Advanced Security 10.2.0.3.0
    Oracle Advanced Security Patch 10.2.0.5.0
    Oracle Call Interface (OCI) 10.2.0.3.0
    Oracle Call Interface (OCI) Patch 10.2.0.5.0
    Oracle Clusterware RDBMS Files 10.2.0.3.0
    Oracle Clusterware RDBMS Files Patch 10.2.0.5.0
    Oracle Code Editor 1.2.1.0.0I
    Oracle COM Automation Feature 10.2.0.3.0
    Oracle COM Automation Feature Patch 10.2.0.5.0
    Oracle Configuration Manager 10.3.2.1.0
    Oracle Containers for Java 10.2.0.3.0
    Oracle Containers for Java 10.2.0.5.0
    Oracle Core Required Support Files 10.2.0.3.0
    Oracle Core Required Support Files Patch 10.2.0.5.0
    Oracle Data Mining RDBMS Files 10.2.0.3.0
    Oracle Data Mining RDBMS Files Patch 10.2.0.5.0
    Oracle Data Provider for .NET 10.2.0.3.0
    Oracle Data Provider for .NET Patch 10.2.0.5.0
    Oracle Database 10g 10.2.0.3.0
    Oracle Database 10g 10.2.0.3.0
    Oracle Database 10g interMedia Files 10.2.0.3.0
    Oracle Database 10g interMedia Files Patch 10.2.0.5.0
    Oracle Database 10g Patch 10.2.0.5.0
    Oracle Database 10g Patch 10.2.0.5.0
    Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
    Oracle Database User Interface 2.2.13.0.0
    Oracle Database Utilities 10.2.0.3.0
    Oracle Database Utilities Patch 10.2.0.5.0
    Oracle Display Fonts 9.0.2.0.0
    Oracle Enterprise Manager Console DB 10.2.0.3.0
    Oracle Enterprise Manager Console DB 10.2.0.5.0
    Oracle Extended Windowing Toolkit 3.4.38.0.0
    Oracle Globalization Support 10.2.0.3.0
    Oracle Globalization Support Patch 10.2.0.5.0
    Oracle Help For Java 4.2.6.1.0
    Oracle Help for the Web 1.1.10.0.0
    Oracle Ice Browser 5.2.3.6.0
    Oracle interMedia 10.2.0.3.0
    Oracle interMedia Annotator 10.2.0.1.0
    Oracle interMedia Annotator 10.2.0.5.0
    Oracle interMedia Client Option 10.2.0.3.0
    Oracle interMedia Client Option Patch 10.2.0.5.0
    Oracle interMedia Java Advanced Imaging 10.2.0.3.0
    Oracle interMedia Java Advanced Imaging Patch 10.2.0.5.0
    Oracle interMedia Locator 10.2.0.3.0
    Oracle interMedia Locator Patch 10.2.0.5.0
    Oracle interMedia Locator RDBMS Files 10.2.0.3.0
    Oracle interMedia Locator RDBMS Files Patch 10.2.0.5.0
    Oracle interMedia Patch 10.2.0.5.0
    Oracle Internet Directory Client 10.2.0.3.0
    Oracle Internet Directory Client Patch 10.2.0.5.0
    Oracle Java Client 10.2.0.3.0
    Oracle Java Client Patch 10.2.0.5.0
    Oracle JDBC Thin Driver for JDK 1.2 10.2.0.3.0
    Oracle JDBC Thin Driver for JDK 1.2 Patch 10.2.0.5.0
    Oracle JDBC Thin Driver for JDK 1.4 10.2.0.3.0
    Oracle JDBC Thin Driver for JDK 1.4 Patch 10.2.0.5.0
    Oracle JDBC/OCI Instant Client 10.2.0.3.0
    Oracle JDBC/OCI Instant Client Patch 10.2.0.5.0
    Oracle JDBC/THIN Interfaces 10.2.0.1.0
    Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
    Oracle JVM 10.2.0.3.0
    Oracle JVM Patch 10.2.0.5.0
    Oracle LDAP administration 10.2.0.1.0
    Oracle LDAP administration patch 10.2.0.5.0
    Oracle Locale Builder 10.2.0.1.0
    Oracle Message Gateway Common Files 10.2.0.3.0
    Oracle Message Gateway Common Files Patch 10.2.0.5.0
    Oracle Net 10.2.0.3.0
    Oracle Net Listener 10.2.0.3.0
    Oracle Net Listener Patch 10.2.0.5.0
    Oracle Net Patch 10.2.0.5.0
    Oracle Net Required Support Files 10.2.0.3.0
    Oracle Net Required Support Files Patch 10.2.0.5.0
    Oracle Net Services 10.2.0.1.0
    Oracle Notification Service 10.1.0.3.0
    Oracle Notification Service Patch 10.2.0.5.0
    Oracle Objects for OLE 10.2.0.3.0
    Oracle Objects for OLE Patch 10.2.0.5.0
    Oracle ODBC Driver 10.2.0.3.0
    Oracle ODBC Driver Patch 10.2.0.5.0
    Oracle ODBC Driverfor Instant Client 10.2.0.3.0
    Oracle ODBC Driverfor Instant Client Patch 10.2.0.5.0
    Oracle OLAP 10.2.0.3.0
    Oracle OLAP API 10.2.0.3.0
    Oracle OLAP API Patch 10.2.0.5.0
    Oracle OLAP Patch 10.2.0.5.0
    Oracle OLAP RDBMS Files 10.2.0.3.0
    Oracle OLAP RDBMS Files Patch 10.2.0.5.0
    Oracle One-Off Patch Installer 10.2.0.3.0
    Oracle One-Off Patch Installer 10.2.0.4.2
    Oracle Partitioning 10.2.0.3.0
    Oracle Partitioning Patch 10.2.0.5.0
    Oracle Programmer 10.2.0.1.0
    Oracle Provider for OLE DB 10.2.0.3.0
    Oracle Provider for OLE DB Patch 10.2.0.5.0
    Oracle RAC Required Support Files-HAS 10.2.0.3.0
    Oracle RAC Required Support Files-HAS Patch 10.2.0.5.0
    Oracle Real Application Testing 10.2.0.5.0
    Oracle Recovery Manager 10.2.0.3.0
    Oracle Recovery Manager Patch 10.2.0.5.0
    Oracle Remote Configuration Agent 10.2.0.3.0
    Oracle Remote Configuration Agent Patch 10.2.0.5.0
    Oracle Spatial 10.2.0.1.0
    Oracle Starter Database 10.2.0.3.0
    Oracle Starter Database Patch 10.2.0.5.0
    Oracle Text 10.2.0.3.0
    Oracle Text Patch 10.2.0.5.0
    Oracle UIX 2.1.22.0.0
    Oracle UIX 2.2.24.6.0
    Oracle Universal Installer 10.2.0.3.0
    Oracle Universal Installer 10.2.0.5.0
    Oracle Wallet Manager 10.2.0.3.0
    Oracle Wallet Manager Patch 10.2.0.5.0
    Oracle Windows Interfaces 10.2.0.1.0
    Oracle XML Development Kit 10.2.0.3.0
    Oracle XML Development Kit Patch 10.2.0.5.0
    Parser Generator Required Support Files 10.2.0.1.0
    Parser Generator Required Support Files 10.2.0.5.0
    Perl Interpreter 5.8.3.0.4
    PL/SQL 10.2.0.3.0
    PL/SQL 10.2.0.5.0
    PL/SQL Embedded Gateway 10.2.0.3.0
    PL/SQL Embedded Gateway Patch 10.2.0.5.0
    Platform Required Support Files 10.2.0.3.0
    Platform Required Support Files 10.2.0.5.0
    Precompiler Common Files 10.2.0.3.0
    Precompiler Common Files Patch 10.2.0.5.0
    Precompiler Required Support Files 10.2.0.3.0
    Precompiler Required Support Files Patch 10.2.0.5.0
    RDBMS Required Support Files 10.2.0.3.0
    RDBMS Required Support Files for Instant Client 10.2.0.3.0
    RDBMS Required Support Files for Instant Client Patch 10.2.0.5.0
    RDBMS Required Support Files Patch 10.2.0.5.0
    regexp 2.1.9.0.0
    Required Support Files 10.2.0.1.0
    Sample Schema Data 10.2.0.3.0
    Sample Schema Data Patch 10.2.0.5.0
    Secure Socket Layer 10.2.0.3.0
    Secure Socket Layer Patch 10.2.0.5.0
    SQL*Plus 10.2.0.3.0
    SQL*Plus 10.2.0.5.0
    SQLJ Runtime 10.2.0.3.0
    SQLJ Runtime Patch 10.2.0.5.0
    SSL Required Support Files for InstantClient 10.2.0.3.0
    SSL Required Support Files for InstantClient Patch 10.2.0.5.0
    Sun JDK 1.4.2.1.4
    Sun JDK 1.4.2.14.0
    Sun JDK extensions 10.1.2.0.0
    XDK Required Support Files 10.2.0.3.0
    XDK Required Support Files Patch 10.2.0.5.0
    XML Parser for Java 10.2.0.3.0
    XML Parser for Java Patch 10.2.0.5.0
    XML Parser for Oracle JVM 10.2.0.3.0
    XML Parser for Oracle JVM Patch 10.2.0.5.0
    There are 211 products installed in this Oracle Home.
    There are no Interim patches installed in this Oracle Home.
    OPatch succeeded.
    Regards,
    NONUDAY

  • Error in installing CE SR3 trial version on windows

    I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
    on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
    An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
    choose Retry to repeat the current step.
    choose View Log to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
    Plz help me..itz urgent,
    Cheers,
    Aravind.

    Hi,
    Did you check C:\Program Files\sapinst_instdir\CE71_DEV_ADA\configtool.0.trc? I guess it should contain a hint on what's wrong ...
    Best regards, dido

  • Error in installing windows 2008 r2 sp 1 element not found

    error in installing windows 2008 r2 sp 1 element not found

    Hi,
    As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
    us to go further.
    In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
    Windows Update, or download the installation package and then install manually?
    Please refer to the following article and check if can help you to solve this issue.
    The error 0X80070490(Element not found) when you are installing a service pack or update
    http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
    By the way, you can also install the Service Pack 1 in
    Clean Boot mode manually. Then please check if install successfully.
    Hope this helps.
    Best regards,
    Justin Gu

Maybe you are looking for