Error -1950679035 latches,restart the SVE service only possible?

Hello,
I am developing and testing my application on my windows 2000pro PC. with Labview 8.21.
On local host I am testing a simulated target, a host program and a client program (much like NI example).
When I start target or client program before the host program, error -1950679035 appears, which I can understand, but restarting in the right order does not clear this error.
The only way it is cleared is when I restart the SVE in windows services.
After that, starting in the wrong order again ,which generates the error again, this error does NOT latch. (is cleared after restarting in the right order.)
This "error-latch"appeares every day I start my computer so I think it has something to do about power-up dependancy of the SVE..??
Is this a known "bug"?
Is manualy restarting the service the only option?
I tried to build a Labview exe which runs a windows SDK program called "sc.exe" ,sequence:  sc stop NITaggerService -delay-start NITaggerService-delay which
runs ok in edit mode but after build to exe and run it, windows comes with "this application is not responding, exit".
(I wanted to put this exe in my PC startup)
Kind regards,
Frank

Installed Labview 8.50.
Problem disappeared.
Frank

Similar Messages

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. Tried restarting the mac then only VGA adapter worked.

    I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
    I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.

    Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
    Thanks again for your post. Cheers from Bonnie Scotland.

  • Too high TimeDataRetrieval(15 mins) of a report is making us restart the reporting services

    Hi,
    We have an SSRS report which is taking less than a minute to open on development server. Same report on production server is taking more than 15 minutes to retrieve the data; rendering and processing time is very small comparatively which is not an
    issue. When we restart the reporting services on the production server, retrieval time is reducing from 15 minutes to less than a minute.
    Please help us in rectifying this critical issue.
    Thanks in advance.
    Regards,
    Simple Living, High Thinking.. :)

    Hi RamukNarik,
    Sorry for my delay.
    In SQL Server Reporting Services (SSRS), TimeDataRetrieval is includes time spent opening connections to the data source and time spent reading data rows from the data extension.
    If a report has multiple data sources/data sets that can be executed in parallel, TimeDataRetrieval contains the duration of the longest DataSet, not the sum of all DataSets durations.  If DataSets are executed sequentially, TimeDataRetrieval contains
    the sum of all DataSet durations.
    If the TimeDataRetrieval is high, the data source could be a bottleneck, or the queries retrieve lots of data.  If the there is a high RowCount, lots of data is being retrieved - we might want to review the dataset queries.  If high volumes of
    data are grouped, sorted, and aggregated, high EstimatedMemoryUsageKB values for Processing are very likely. More detail information you can refer to these articles about
    Analyzing and Optimizing Reports and
    Troubleshooting Report Performance.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Error "Unable to convert the sender service  to an ALE logical system"

    Hi,
    I send I message from XI to R3 and I get the error "Unable to convert the sender service  to an ALE logical system" in transaction "sxmb_moni". I've configured the idoc-adapter, as following:
    -I have created a business system "r3sys_bs" with a logical system "r3system". This business system is the idoc-adapter. This logical system is also created in transaction "bd54". In the ID I have assigned the business system the logical system (adapterspecific identification).
    So, this error still appears.
    Can anybody help me please?
    Regards
    Stefan

    Hi,
    our scenario is JMS --> XI --> IDoc
    so, I have created a business system "jms_bs" without a logical system in sld, that I use for the jms-connection to another software. so, the business system is a "third party".
    Then I have created a business system with assigned logical system for the IDoc-Receiver as I in my first posting mentioned.
    Which of both business systems need a logical system?
    Thanks
    Regards
    Stefan

  • Error: Unable to convert the sender service SC_PO_fileidoc to an ALE logica

    Hi,
    I'm currently creating an Idoc adapter receiver with BPM. However I've received an error at the second stage from BPM - IDOC. It gives the error "Unable to convert the sender service SC_PO_fileidoc to an ALE logical system". Appreciate if anybody can help me.
    Cheers
    Zubair

    Hi,
    This weblog will help you resolve this issue.
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    under the section "Intgeration Process as the receiver system"
    Check whether you have assigned the Logical system (LS) name to the integration process in the adapter specific identifiers (Integration Directory). Also check whether an entry for the LS is available in the SLD for the sender Business system.
    Regards,
    Sridhar

  • Is there a package for installing the FlexNet service only?

    Hi,
    we are trying to virtualize Acrobat Pro 9 using Softgrid/App-V. Unfortunately the FlexNet service does not support virtualization. According to the virtualization community a possible workaround would be a local installation of the FlexNet service on our terminal servers.
    To do that I need an installation package for the FlexNet service only or command line parameters for installing the service from the normal package without installing acrobat.
    Is such a package or command available somewhere?
    Thanks!

    There is no standard iView for ME53N, but you can create you own iView which will point to any SAP Transaction in either WinGui or WebGui Mode and assign it to end users.
    Refer to the following standard SAP help:
    [http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]
    Regards,
    Trikanth Basetty

  • Internal error: exception thrown from the servlet service function

    when i invoke the servlet in unix iplanet server i got the error
    Kindly let me get the solution .i am in 11th hour.
    [06/Jan/2006:09:30:28] info (10646): Internal Info: loading servlet
    /servlet/Ipl
    XmlServlet
    [06/Jan/2006:09:30:28] info (10646): /servlet/IplXmlServlet: init
    [06/Jan/2006:09:30:28] failure (10646): Internal error: exception thrown
    from the servlet service function (uri=/servlet/IplXmlServlet/):
    java.lang.NullPointerException, stack: java.lang.NullPointerException
    at IplXmlReqHandler.generateRsp(IplXmlReqHandler.java:452)
    at IplXmlReqHandler.processRequest(IplXmlReqHandler.java:168)
    at IplXmlServlet.processRequest(IplXmlServlet.java:219)
    at IplXmlServlet.doGet(IplXmlServlet.java:184)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at
    com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRun
    ner.java:513)
    Thanking you
    brindasanth

    you are in the wrong forum for this kind of question/product,
    goto:
    http://swforum.sun.com/jive/forum.jspa?forumID=16
    (in case you don't like "goto" - look at it like a "forward" :-) )
    additionally don't forget to mention
    - OS version
    - WebServer version + SP
    - .. the more the better
    rgds.
    /u

  • Internal error: exception thrown from the servlet service function (uri=/servlet/auth)

    I am getting the follow error in my webserver error log very offen. I am running iPlanet Delegated Administrator 4.5 and iPlanet WebServer 4.1 SP5. Sometimes I have to stop and start the web server because users can no longer authenticate to Delegated Admin. Does anyone know what this means.
    Internal error: exception thrown from the servlet service function (uri=/servlet/auth): javax.servlet.ServletException, Stack: javax.servlet.ServletException
    at netscape.nda.servlet.NDAAuth.execute(NDAAuth.java, Compiled Code)
    at netscape.nda.servlet.NDAServlet.doPost(NDAServlet.java, Compiled Code)
    at netscape.nda.servlet.NDAServlet.doGet(NDAServlet.java, Compiled Code)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java, Compiled Code)"

    Hi,
    I hope below link will help you.
    http://knowledgebase.iplanet.com/ikb/kb/articles/4761.html
    Thanks,
    Daks.

  • Internal error: exception thrown from the servlet service function (uri=/login))

    I have done an install of iPlanet Portal Server on a Solaris 8 machine and when I try to access the main Page I get:
    [26/Apr/2002:16:15:27] failure (21872): Internal error: exception thrown from the servlet service function
    (uri=/login): java.lang.NullPointerException, stack: java.lang.NullPointerException
    at com.iplanet.portalserver.auth.service.AuthD.isClientDetectionEnabled(AuthD.java:520)
    at com.iplanet.portalserver.auth.service.AuthD.getClientType(AuthD.java:532)
    at com.iplanet.portalserver.auth.service.AuthRequest.<init>(AuthRequest.java:102)
    at com.iplanet.portalserver.auth.service.AuthRequest.getAuthRequest(AuthRequest.java:177)
    at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Code)
    at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.java:990)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:507)
    , root cause:
    Suggestions? I have sucessfully installed IPS before, but I cannot figure out the cause of this error.
    Mike

    Looks like a patch conflict ..
    Check /var/sadm/patch and see
    if this patch 108875-07 is present, if you have a later patch than that then you might run into the above problem ..

  • Restarting the ssh services

    Hi,
    How can I restart the ssh services in my solaris10 Sparc server.
    I made changes in the[b] /etc/ssh/sshd_config file.
    For the changes to take effect I need to restart the ssh services , which script I need to stop & how can I restart the service...
    Regards
    Suseendran . A

    Hi I found out the Solution
    This Works..
    /etc/init.d/sshd stop
    /etc/init.d/sshd start
    Regards
    Suseendran .A

  • ALI Search error: "Error - Could not contact the Search Service"

    Hi,
    I have installed Aqualogic Interaction with all its components.
    While trying to search for a string, it is throwing this error:
    "Error - Could not contact the Search Service".
    Unable to figure it out. Is this because of the search host settings?
    Where can I check/modify the search host settings? I am not able to find them.
    Can someone please help on this?
    Thanks in advance,
    Ashok

    The settings for the search server are located in Administration. Go to the utilities drop down, from here you should see Search Service Manager. Here you should see the contact node host and port.
    Make sure the Search Server is running. Also, import the searchcluster.pte file so that the Search Cluster Manager is visible in the utilities drop down.
    Kenan
    http://www.ppc.com

  • Error : Could not start the SSO service. Please check the configuration

    Hi,
    I am getting the above error when enabling the"Agent-Based Windows Single Sign-On with Active Directory (Kerberos0".
    I already twice did the KTpass.Timing is perfect bet CAS and AD.Please look into this CAS LOG file and advice me the next step to solve this issue.
    Thanks
    swami

    Until you perform the configuration on the AD server, the following message will appear:
    Error: Could not start the SSO service. Please check the configuration.
    So configure the AD server so that the error message will not appear again.

  • Exchange 2003 - When I create a send connector do I need to restart the SMTP service?

    When I create or update a send connector on Exchange 2003 do I need to restart the SMTP service and/or MS Exchange Routing Engine?

    Hi Chad,
    Collect some information for your reference:
    You must restart the Microsoft Exchange Routing Engine service and the SMTP service for these changes to take effect.
    More details in the following KB:
    How to configure the SMTP connector in Exchange 200x
    http://support.microsoft.com/kb/265293
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • TS3694 how do i restore my iphone3, got error 3014, seems that the update/restore only can be used from iphone3g and new'er

    how do i restore my iphone3, got error 3014, seems that the update/restore only can be used from iphone3g and new'er

    Go to to your Users/Home/Library/Application Support/iWeb folder in the Finder and then enter  Time Machine.  Go back to the last backup that has the domain file, select it and use the Restore button.
    OT

Maybe you are looking for