Error 2: Failed to perform Action

I used the Program > Uninstall to remove all the NI Software from my PC due to a largenumber of issues in the dev encironment.
I then went to reinstall just LabVIEW 2014.  I now get an error: "Error 2: Failed to perform ACtion Liscence Manager Updating OS Compatibility."  The next dialog is "Unknown Error (no details)" and then the install exits.
If I look at Programs and Features, I see that the only NI program installed was the NI Customer Experience Improvement Program (irony...)
One KB Article suggsting installing the NI Update Service, but that failed too.
I have tried registry cleaning and MS Fix It, still no help.
I cant go back to a restore point, since there is a restore point created for each NI software (100+), and by default windows seems to only store the last 20 or so.
I really do not want to reformat since I have other software that is a pain in the butt with liscencing to re-setup.
I have re-downloaded the LV2014 installer from the website twice, no improvement.
Kenny

I would recommend creating a service request to work with an NI Applications Engineer on this issue:
https://lumen.ni.com/nicif/us/gb_srm/content.xhtml​?du=https%3A%2F%2Fsine.ni.com%2Fsrm%2Fapp%2Fgetass​...

Similar Messages

  • Error 2 failed to perform action labview license activation

    Bonjour, 
    Quand j'installe Labview, à la fin de l'installation, j'obtiens le message d'erreur suivant :
     "error 2 failed to perform action labview license activation"
    Et quand j'essaye d'ouvrir Labview par lasuite j'obtiens ce message :
    "Il se peut que l'installation de cette application soit corrompue. Essayer de réparer ce programme en utilisant la fonctionnnalité Ajout/Suppression de programmes du panneau de configuration Windows"
    Seulement Labview n'apparait pas dans cette liste de programmes...
    J'ai un numéro de série pour une licence étudiante que je rentre durant l'installation.
    Merci de m'aider si quelqu'un a une solution.

    Bonjour Vincent,
    As-tu déjà retenté une réinstallation de LabVIEW ? L'erreur fait référence à une corruption d'installation. 
    Je te propose donc de désinstaller/nettoyer manuellement LAbVIEW ou en utilisant un "cleaner" type Windows Installer Cleanup Utility et de procéder ensuite à une réinstallation du logiciel.
    Cordialement,
    Antonin G. Associated LabVIEW Developper
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Communauté francophone des développeurs LabVIEW et des enseignants en STI2D
    Si vous souhaitez partage...

  • "Failed to perform requested action" error while importing table in P.Layer

    HI
    I have encountered an error while importing the table into physical layer of the repository. When I select the table and click the 'move the selected' button it is throwing this error "Failed to perform requested action". I didn't understand what does it mean, even it is not giving any error code but when I try to import other tables it is working fine. Please help me to solve this if someone has any idea. Thanks.

    Hi Srinivas,
    I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
    - Check that your Communication channel is activated and working fine.
    - Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
      Just check with all authorization.
    I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
    Thanks,
    Bhupesh.

  • SCOM 2012 R2 Agent Issue: Error 25211.Failed to install performance counters.. Error Code: -2147024809

    Hi All,
    I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
    I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
    I've rebuilt the Perfmon Counters based on this article:&nbsp;https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
    I've also enabled verbose logging on the msi installation:
    InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
    InstallHSPerfCounters: Installing agent perf counters. 
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057. 
    InstallPerfCountersLib: Retry Count : . 
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057. 
    Any help on this would be great.

    Hi Stefan,
    I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
    I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
    HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
    Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
    Written a SQL query to gather more information. SQL query I used is:
    SELECT
    ME.FullName,
    HSO.StartDateTime AS OutageStartDateTime,
    DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
    HSO.ReasonCode,
    DS.Name AS ReasonString
    FROM  vManagedEntity AS ME
    INNER JOIN     vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
    INNER JOIN     vStringResource AS SR ON HSO.ReasonCode =
    REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
    – CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
    INNER JOIN     vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
    WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
    AND DS.LanguageCode = ‘ENU’
    AND ME.FullName like ‘%SERVER NAME%’   –Change name here or leave %% for ALL SERVERS
    ORDER BY OutageStartDateTime
    This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
    Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
    Any help on this would be great.

  • How to resolve this IOS 8.3 update/restore error : RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage

    Yesterday, I encountered failed update from IOS 8.2 to IOS 8.3 on my ipad mini (model:A1455). Have tried several attempts but still getting below error on the time update/recover was almost done, thus, stucking my device on recovery mode
    [18:12:45.0849] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0864] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0864] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0895] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0911] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0911] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0958] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0958] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:45.0973] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:46.0036] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
    [18:12:46.0083] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 2
    [18:12:46.0192] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 2
    [18:12:46.0270] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 3
    [18:12:46.0348] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 5
    [18:12:46.0426] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 6
    [18:12:46.0504] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 8
    [18:12:46.0535] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 9
    [18:12:46.0629] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 10
    [18:12:46.0707] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 11
    [18:12:46.0785] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 13
    [18:12:46.0878] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 14
    [18:12:46.0956] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 16
    [18:12:47.0050] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 17
    [18:12:47.0128] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 19
    [18:12:47.0206] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 20
    [18:12:47.0221] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 22
    [18:12:47.0315] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 22
    [18:12:47.0393] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 23
    [18:12:47.0471] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 25
    [18:12:47.0549] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 26
    [18:12:47.0643] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 28
    [18:12:47.0721] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 29
    [18:12:47.0814] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 31
    [18:12:47.0892] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 32
    [18:12:47.0955] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 33
    [18:12:48.0033] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 35
    [18:12:48.0126] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 36
    [18:12:48.0204] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 38
    [18:12:48.0282] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 39
    [18:12:48.0360] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 41
    [18:12:48.0438] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 42
    [18:12:48.0516] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 44
    [18:12:48.0579] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 45
    [18:12:48.0594] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 47
    [18:12:48.0672] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 47
    [18:12:48.0688] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0688] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0703] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0781] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0797] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0797] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0813] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0906] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
    [18:12:48.0984] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 58
    [18:12:49.0015] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 67
    [18:12:49.0078] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 68
    [18:12:49.0140] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 75
    [18:12:49.0156] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 81
    [18:12:49.0234] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 81
    [18:12:49.0281] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 90
    [18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0312] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0327] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0421] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0483] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0515] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0530] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0546] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0546] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0561] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0577] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0593] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0608] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0639] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0655] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0671] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0686] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0702] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0717] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0733] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
    [18:12:49.0749] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0764] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0780] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0795] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0827] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0827] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0842] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0858] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0951] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
    [18:12:49.0983] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 98
    [18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
    [18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
    [18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
    [18:12:50.0029] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
    [18:12:50.0045] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
    [18:13:07.0439] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
    [18:13:07.0642] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
    [18:13:07.0845] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
    [18:13:08.0219] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
    [18:13:08.0297] amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: NO
    [18:13:08.0359] device returned CFError with code -1
    [18:13:08.0359] dumping CFError returned by restored:
    [18:13:08.0375] CFError domainXXXXXXXXXXXXXXXXXXXin code:-1 description:failed to update device firmware
    [18:13:08.0375] CFError domainXXXXXXXXXXXXXXXXXXXin code:-1 description:ramrod firmware update failed
    [18:13:08.0375] CFError domainXXXXXXXXXrorDomain code:1004 description:update_baseband: failed to perform next stage
    [18:13:08.0391] CFError domainXXXXXXXXXr code:48 description:Modem returned to download mode
    [18:13:08.0391] Sending acknowledgement that final status was received
    [18:13:11.0011] Restore completed, status:-1
    [18:13:11.0011] Failure Description:
    [18:13:11.0011] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
    [18:13:11.0011]    Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
    [18:13:11.0011]       Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
    [18:13:11.0011]          Depth:3 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
    [18:13:11.0011]             Depth:4 Error:The operation couldn’t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
    [18:13:11.0011]                Depth:5 Error:The operation couldn’t be completed. (BBUpdater error 48 - Modem returned to download mode)

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • [INS-06001] Failed to perform operation due to internal driver error

    I'm installing GI 11.2.0.4 on the zone of solaris(SPARC) 11.1.
    Among executed runInstaller, the following error occured when
    "setup" button is pushed for checking SSH connectivity
    on "Secify Cluster Configuration(Step 4 of 9)" section.
    [INS-06001] Failed to perform operation due to internal driver error.
    Additionally, the following was output by a console executed runInstaller.
    # An unexpected error has been detected by HotSpot Virtual Machine:
    #  SIGBUS (0xa) at pc=0xffffffff3df832fc, pid=14407, tid=38
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_51-b10 mixed mode)
    # Problematic frame:
    # C  [libc.so.1+0x832fc]
    # An error report file with more information is saved as hs_err_pid14407.log
    # If you would like to submit a bug report, please visit:
    #   http://java.sun.com/webapps/bugreport/crash.jsp
    Does anyone know the solution for this issue?
    The configuration of the system is the following.
    +--------------------------------------------+
    |         testserver (global zone)           |
    |+------------+                +------------+|
    ||   zone1    |                |   zone2    ||
    ||      +-----|  +----------+  |-----+      ||
    ||      |vnic3|--|etherstub1|--|vnic4|      ||
    ||      +-----|  +----------+  |-----+      ||
    ||            |                |            ||
    ||  +-----+   |                |  +-----+   ||
    ||  |vnic1|   |                |  |vnic2|   ||
    |+------------+                +------------+|
    |      |         +----------+        |       |
    |      +---------|etherstub0|--------+       |
    |                +----------+                |
    |                     |                      |
    |                  +-----+                   |
    +------------------|vnic0|-------------------+
                       +-----+
    zonecfg:kudotest01> export
    create -b
    set brand=solaris
    set zonepath=/zones/kudotest01
    set autoboot=false
    set ip-type=exclusive
    add net
    set configure-allowed-address=true
    set physical=vnic1
    end
    add net
    set configure-allowed-address=true
    set physical=vnic3
    end
    add anet
    set linkname=net0
    set lower-link=auto
    set configure-allowed-address=true
    set link-protection=mac-nospoof
    set mac-address=random
    end
    add device
    set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
    end
    zonecfg:kudotest02> export
    create -b
    set brand=solaris
    set zonepath=/zones/kudotest02
    set autoboot=false
    set ip-type=exclusive
    add net
    set configure-allowed-address=true
    set physical=vnic2
    end
    add net
    set configure-allowed-address=true
    set physical=vnic4
    end
    add anet
    set linkname=net0
    set lower-link=auto
    set configure-allowed-address=true
    set link-protection=mac-nospoof
    set mac-address=random
    end
    add device
    set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
    end
    zonecfg:kudotest02>
    testserver:~# dladm show-vnic
    LINK                OVER         SPEED  MACADDRESS        MACADDRTYPE       VID
    vnic0               etherstub0   40000  2:8:20:b5:32:c1   random            0
    vnic1               etherstub0   40000  2:8:20:45:a2:af   random            0
    vnic2               etherstub0   40000  2:8:20:86:7e:4e   random            0
    vnic3               etherstub1   40000  2:8:20:8a:96:a    random            0
    vnic4               etherstub1   40000  2:8:20:ef:f3:dd   random            0
    root@kudotest01:~# ipadm show-addr
    ADDROBJ           TYPE     STATE        ADDR
    lo0/v4            static   ok           127.0.0.1/8
    vnic1/v4          static   ok           192.168.120.2/24
    vnic3/privaddr    static   ok           192.169.120.2/24
    lo0/v6            static   ok           ::1/128
    vnic1/v6          addrconf ok           fe80::8:20ff:fe45:a2af/10
    root@kudotest02:~# ipadm show-addr
    ADDROBJ           TYPE     STATE        ADDR
    lo0/v4            static   ok           127.0.0.1/8
    vnic2/v4          static   ok           192.168.120.3/24
    vnic4/privaddr    static   ok           192.169.120.3/24
    lo0/v6            static   ok           ::1/128
    vnic2/v6          addrconf ok           fe80::8:20ff:fe86:7e4e/10

    Please check https://hiteshgondalia.wordpress.com/2012/12/08/ssh-setup-fail-unable-to-find-ssh_host_rsa_key-pub/, Oracle Application DBA: [INS-06001] Failed to perform operation due to internal driver error (During installation of RAC…

  • MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

    Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
    ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
    Litetouch deployment failed, Return code = -2147467259 0x80004005
    Failed to run action: Install Operating System.
    Access is denied (Error: 00000005; Source: Windows)
    Tried Giving Everyone Full rights to the deployment share
    Rebooted Server
    Updated Deployment Share
    Any ideas would be great!
    Thanks
    Rick
    Richard Ray

    https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
    Please try this link.
    Kris Da San Martino
    The SMSTS.log shows
    Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
    Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
    Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    !--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Failed to run the action: Install Operating System.
    Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    **************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

  • OS Error 665(failed to retrieve text for this error. Reason: 15105) while performing backup

    Hi everyone,
    I am performing a backup of sharepoint 2010 content database on my sql 2008 std edition which has file stream enabled and I experience the following problem.
    When the backup reaches 40% (both when I do it via SSMS or via Maintenance plan) I get the following error:
    BackupIoRequest::ReportIoError: write failure on backup device 'K:\SQL Backup\SP_Content2010.bak'. Operating system error 665(failed to retrieve text for this error. Reason: 15105).
    Error: 18210, Severity: 16, State: 1.
    I also tried backup the database on a different disk to make sure the problem is not there, but the same error appeared when the backup reached 40 %. I also executed DBCC CHECKDB against the database but it run successfully.
    I could not find any other relevant source what the problem might be.
    Any help will be very much appreciated.
    Thanks

    Hello,
    Honestly it's going to come down to testing and root cause analysis. I don't have a single shot answer for you unfortunately.
    I would start by doing the hotfix on that KB since you had OS Error 665 (again, you can run net helpmsg 665 to see the os error message). The SQL Server error 3041 (select * from sys.messages where message_id = 3041 and language_id = 1033) is "BACKUP failed
    to complete the command %.*ls. Check the backup application log for detailed messages." Error 18210 is "%s: %s failure on backup device '%s'. Operating system error %s.". This points me back to the filesystem or storage.
    Could you P->V the server during a maintenance window so you can test? The biggest thing here is that you don't have any valid backups so you're running the risk of losing data.
    While not a method I use, you could stop SQL Server and filesystem copy the database and filestream share in the interim.
    -Sean
    Sean Gallardy | Blog |
    Twitter

  • ERROR: Cannot perform action deploy on component library

    Hi all,
    Some Background on what i did:
    First I created two DCs:
    1)External library DC
    2)J2EE server component library DC
    and followed the procedure given as in
    /people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
    Then i created a third DC of type Web Module in order to hold all the classes as given in: Using External JARs in a Web Dynpro Project
    But when I deploy the J2EE server library component DC, I am getting the following error:
    Oct 16, 2006 8:38:39 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [001]Deployment aborted
    Settings
    SDM host : teak
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp19352pcbp.com~lib_comp.sda
    Result
    => deployment aborted : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp19352pcbp.com~lib_comp.sda
    Aborted: development component 'lib_comp'/'pcbp.com'/'NWX_LIBS_C'/'20061016083638':
    Caught exception during library deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot perform action deploy on component library E:\usr\sap\NWX\DVEBMGS00\SDM\root\origin\pcbp.com\lib_comp\NWX_LIBS_C\20061016083638\temp19352pcbp.comlib_comp.sda. Reason: java.rmi.RemoteException: Error during deployLib of server component ./temp/deploy/work/deploying/temp19352pcbp.comlib_comp.sda.. Reason: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException; nested exception is: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1576)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployLibrary(DeployServiceImpl.java:1434)
    at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
    at com.sap.engine.core.service630.context.container.deploy.DeployContextImpl.deployLibrary(DeployContextImpl.java:36)
    at com.sap.engine.services.deploy.server.library.DeployLibTransaction.begin(DeployLibTransaction.java:68)
    at com.sap.engine.services.deploy.server.library.LibraryTransaction.makeAllPhases(LibraryTransaction.java:81)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1566)
    ... 11 more
    Exception is: ; nested exception is: com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot perform action deploy on component library E:\usr\sap\NWX\DVEBMGS00\SDM\root\origin\pcbp.com\lib_comp\NWX_LIBS_C\20061016083638\temp19352pcbp.comlib_comp.sda. Reason: java.rmi.RemoteException: Error during deployLib of server component ./temp/deploy/work/deploying/temp19352pcbp.comlib_comp.sda.. Reason: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException; nested exception is: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1576)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployLibrary(DeployServiceImpl.java:1434)
    at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:336)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
    at com.sap.engine.core.service630.context.container.deploy.DeployContextImpl.deployLibrary(DeployContextImpl.java:36)
    at com.sap.engine.services.deploy.server.library.DeployLibTransaction.begin(DeployLibTransaction.java:68)
    at com.sap.engine.services.deploy.server.library.LibraryTransaction.makeAllPhases(LibraryTransaction.java:81)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1566)
    ... 11 more
    Exception is:
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineCompOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    I have being stuck up on this erorr for past few days,
    If anybody can please help me out in this,then it would be highly appreciated.
    Thank You,
    With regards,
    Krunal.

    Do you have permissions to write to the Database/RDMBS?
    James

  • 'Failed to process action' error

    ZCM 10.3.3 on SLES 11 SP1 Linux.
    On one bundle I get a 'Failed to process action: Information for id 002da7552283c5d9c34a94f03d28b33a has not been cached.' error. I have checked and there appears to be enough room on the repository. Can this be a timing issue where the app hasn't been fully downloaded when the user tries to install it?
    What are other causes of this error?
    Thanks,
    Dan

    dchunt,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • OBIEE installation error-(ASInstance Failed)

    Hi,
    I am installing OBIEE 11.1.1.6 in windows server 2003(32 bit).
    During the configuration process i am getting an error-
    ASInstance Failed
    When i checked the error log file, it is showing the following error-
    oracle.as.provisioning.engine.CfgWorkflowException
         at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:78)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error creating ASInstance instance1.
    Cause:
    An internal operation has failed: PermGen space
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
         ... 18 more
    Caused by: java.lang.OutOfMemoryError: PermGen space
    Please share your valuable suggestions..
    Edited by: vp_ora on Feb 18, 2013 3:09 AM

    Steps to do
    1) /etc/hosts now reads:
    127.0.0.1     localhost
    192.168.56.101 demo.us.oracle.com oracle-pc
    2) updated java in path /usr/java from 1.5 to the latest version (1.6.0_27) by rpm-deinstalling the old version first and
    then rpm-installing the new version.
    3) Don't do a simple install.
    Instead u installed WebLogic Server 10.3.5 first, than do the Repository creation with RCU, followed by the BI Server software only install
    and finally the BI Server configuration.
    Marks as correct if helpful or let me know the updates?

  • ERROR = CONNECT failed with sql error '12518'

    Hi All,
    OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
    I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-03113: end-of-file on communication channel
    again the Oracle service is stopped i am not getting why the oracle service is stopping..
    dev_w*.log
    Thu Apr 09 10:33:50 2009
    M  calling db_connect ...
    C  Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   05C84528   05C89AC4   05C8934C
    C  Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
    C 
    C Thu Apr 09 10:33:51 2009
    C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
    [dboci.c      4172]
    C  *** ERROR => CONNECT failed with sql error '12518'
    [dbsloci.c    10933]
    C  Try to connect with default password
    C  Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   05C84528   05C89AC4   05C8934C
    C  Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
    C  Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
    C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
    [dboci.c      4172]
    C  *** ERROR => CONNECT failed with sql error '12518'
    [dbsloci.c    10933]
    B  ***LOG BY2=> sql error 12518  performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 12518  performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 16
    M 
    M    stat = 4
    M    reqtype = 6
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Apr 09 10:33:51 2009
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c   327]
    Any suggestions pls
    Mahesh

    Hi Rohit,
    when i check in the sqlnet.log
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 04-SEP-2007 15:09:30
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:16:32
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:16:46
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:19:27
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:19:28
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:19:29
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 19:26:38
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12518, connecting to:
    (DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 20:35:23
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
        TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    Fatal NI connect error 12518, connecting to:
    (DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 08-APR-2009 20:35:23
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
        TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 09-APR-2009 09:15:43
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
      VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
      Time: 09-APR-2009 09:17:28
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12560
        TNS-12560: TNS:protocol adapter error
        ns secondary err code: 0
        nt main err code: 530
        TNS-00530: Protocol adapter error
        nt secondary err code: 2
        nt OS err code: 0
    This error occured when the oracle service was  not started..
    Mahesh..

  • Upgrade Error - DBConnect fails EC 00256

    Hi,
          the upgrade from 4.6c to Ecc6 failed at step StartSap_Dual with following error
    System start failed code - 2
    - 2 the test rfc did not work
    try to login in with the ddic user. this error shows up on the upgrade screen.
    we are using
    Windows 2000 sp3,oracle 9.02,kernel 700 patch 102
    wen manually tried to connect using management console it gives the error DBConnect fails Ec 00256
    The DB log mode is now changed to Archive log mode.\
    Kindly help if this is a known issue
    thanks
    John
    the dev_w0 log is shown below
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Wed Aug 01 12:03:53 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' ...
    B  Library 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' is "700.08", patchlevel (0.102)
    B  New connection 0 created
    M sysno      00
    M sid        U46
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    102
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        5908
    M
    M  kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5908) [dpxxdisp.c   1301]
    I 
    I Wed Aug 01 12:03:54 2007
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          24344     (1432)
    M  DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1520)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 08D10040, size: 4897456)
    M  DpShMCreate: allocated sys_adm at 08D10040
    M  DpShMCreate: allocated wp_adm at 08D11E80
    M  DpShMCreate: allocated tm_adm_list at 08D17D98
    M  DpShMCreate: allocated tm_adm at 08D17DC8
    M  DpShMCreate: allocated wp_ca_adm at 09121208
    M  DpShMCreate: allocated appc_ca_adm at 09126FC8
    M  DpShMCreate: allocated comm_adm at 09128F08
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 091A9DC8
    M  DpShMCreate: allocated gw_adm at 091A9E08
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 091A9E38
    M  DpShMCreate: allocated wall_adm at 091A9E40
    X 
    X Wed Aug 01 12:03:55 2007
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host SAPUPG46
    M  calling db_connect ...
    C  CLIENT_ORACLE_HOME is not set as environment variable or
    C  DIR_CLIENT_ORAHOME is not set as profile parameter.
    C    assuming using instant client with unspecified location.
    C 
    C Wed Aug 01 12:03:56 2007
    C  Oracle Client Version: '10.2.0.2.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPU46's password
    C  Connecting as /@U46 on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   07443638   07448CD4   0744855C
    C  Attaching to DB Server U46 (con_hdl=0,svchp=074484A8,srvhp=0745A0A4)
    C 
    C Wed Aug 01 12:03:59 2007
    C  Starting user session (con_hdl=0,svchp=074484A8,srvhp=0745A0A4,usrhp=0747CD78)
    C  Now '/@U46' is connected (con_hdl 0, nls_hdl 0).
    C  *** ERROR => Cannot decrypt password I got from table vzxvb
    [dbsloci.c    11430]
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=074484A8,usrhp=0747CD78)
    C  Now I'm disconnected from ORACLE
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server SAPUPG46_U46_00 on host SAPUPG46 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Wed Aug 01 12:03:59 2007
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 5908) [dpnttool.c   327]

    Hi John
    Did you check the env variables??
    Error "CLIENT_ORACLE_HOME is not set as environment variable"
    Define ORACLE_HOME as <drive>:\oracle\<SID>\<oracle_version>
    or CLIENT_ORACLE_HOME as <drive>:\<oracle client location>
    Regards
    Juan
    Please reward with points if helpful

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

Maybe you are looking for

  • Can no longer scan using preview

    I have Brother DCP-9040CN color laser Printer and I am using the latest version of Mountain Lion. I have been scanning documents with no problems. The last time I tried to scan a document, I get the message the selected folder in not writable. I have

  • Screen rotation lock is missing. It seems to have been replaced by a "mute on/off" button instead. How do I fix this?

    It seems to have been replaced by a "mute on/off" button instead. How do I fix this? I'm using an iPod 3G running 5.1.1.

  • Inventory Revaluation

    I need detail information about inventory revaluation, like Tutorial process , import data from DWT , and also how we can do it, and also solution for following matter :Now we have some problem in balance of inventory account, some of them has negati

  • Instant Client With MS VS-2005

    Hi all, does anyone have an idea how to install Oracle Instant client to work with MS Visual Studio 2005 on client machines. I am working on a VB application using Oracle 10gR2 database. Should I install Full Oracle Client on each Client PC , or can

  • Upload XML to create and IDOC

    Hi all, does anybody use FM IDOC_XML_FROM_FILE? I don´t know how to use it? Please if somebody has a valid XML example for this FM post it here? Regards. Jose. Mensaje editado por:         Jose Maria Alot Aguilar