Error 2 - No Such File or directory when trying to unarchive tar files

Hi there,
I'm getting the aforementioned error when I try to unarchive .tar files using the Finder. They unarchive fine using Stuffit, but a bunch of people need to get them and they don't all have stuffit. The files have the expected "zipper" icon with "tar" at the bottom and the Finder tries to open it, but fails.
Any help would be appreciated.
Thanks,
Jeff

I don't know how to solve your problem with the Finder but Stuffit Expander is free and is cross platform. Give everybody the Stuffit Expander installer with the .tar file.
http://www.apple.com/downloads/macosx/systemdiskutilities/stuffitexpander.html

Similar Messages

I have recently downloaded Bootcamp onto my MBP. However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads. Error 2-no such file or directory. I have tried changing the partition and Zipeg. didnt work

I have recently downloaded Bootcamp onto my MBP. However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads. Error 2-no such file or directory. I have tried changing the partition and Zipeg. didnt work.

You need to read and follow the Boot Camp instructions. Boot Camp Assistant is already on your computer in the utilities forderf. You run Boot Camp Assistant. Part of the process is to to then download the Windows Support software. This download is then installed from within Windows.
There is no Boot Camp download that needs to be installed or unzipped from within OSx which you seem to be doing.

Getting Error in CMC - source file error. [No such file or directory]: [CrystalEnterprise.Smtp]

Dear All,
I am able to schedule the Crystal report successfully means mail gets auto triggered as we set in SCHEDULE option. But when we tried to use the notification option we get the status as FAILED. nd in details we get "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]".
But still a mail gets triggred and each and every person will get mail. but the issue is notification will not work properly and no notification mail. And the status is despayed as FAILED with "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]" this message.
Regards,
Rohan Ghadi

Do you have multiple job servers in your environment? Did all the Job servers configured SMTP settings?

ORA-01034: ORACLE not available Linux Error: 2: No such file or directory

Hi,
I have oracle 10.2.0 on Redhat 4 Linux. Yesterday i transport my database from windows to linux and it was working fine.
but today when i try to log in it gives me error like,
[oracle@satish bin]$ ./sqlplus sys as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue May 19 15:33:22 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: system
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name:My all environment variables are fine.
According to me any file is missing by
Linux Error: 2: No such file or directory
but can't find out what.
While i have another database on same system which is working fine.
Thanks
UMesh

Thanks for reply
I applied all the thing
1. my user is already in dba group.
2. I change the permission on orapwORCL and i recreate the same file.
3. [oracle@satish bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue May 19 16:06:25 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privilegesBut nothing works.
any other suggestions.

Download error: Unable to expand "___" into "Downloads". (Error 2 - No such file or directory).

I keep on getting the message "Download error: Unable to expand "___" into "Downloads". (Error 2 - No such file or directory)" when I try to unarchive zip files that I have just downloaded. Can anyone walk me through how to fix this?

Possible solution if dealling with MobileMe gallery.
I ran into this problem while downloading my mobileme gallery albums and videos. I can't tell if that is where you ran into your problem or not, but if it is, this is what worked for me. Most of my albums downloaded and expanded successfully, however about 5 downloaded and would not expland giving the error you got. After several retries, I selected one of the albums, clicked the settings icon, changed the name (added "-2" to the name). This time the downloaded zip file expanded successfully. This worked for all of the albums that I had problems with.

Error 2 - No such file or directory on a zip file

Hey guys, so I borrowed my friends FreeAgent GoFlex drive to get videos from his Go Pro that he put on there. The files were zip files, and when I click on them to open, the Utility comes up and starts unzipping the file, but when the file is done unzipping, it gets the Error 2 - no such file or directory. I thought maybe I'd put the file onto my desktop and unzip it from there, but same error message comes up.
I just want to know what's going on and are the files corrupted when my friend put it onto his external drive, and if there was a way to access the files since I really want them!
Thanks everyone for helping one and taking a look!

I'm at a loss as to why the files are numbered like that - unless, perhaps, they were zipped by StuffIt Deluxe and segmented? If you try opening the first, unnumbered, archive, do you get the same error message? Maybe ask if StuffIt Deluxe was used - http://www.stuffit.com/mac-deluxe.html. It's pretty expensive for what it does but I can only think, at this point, that the files were zipped and segmented using something.
Clinton

Qt g++ "fatal error: QtGui : No such file or directory"

I'm trying to program GUIs with Qt for the first time. I'm still extremely new (started reading about it last night) to C++, although I've been programming in C for a while. From the arch package repo, I've downloaded qt, qt-private-headers, and qt-doc. I haven't changed any directories or permissions around. Inside the directory /usr/share/doc/qt/examples/widgets/calculator I try to compile the example program with
g++ main.cpp -o main
and I get the error:
main.cpp:41:24: fatal error: QApplication: No such file or directory
compilation terminated.
When I add the option
g++ main.cpp -o main -I/usr/include/QtGui
, I get a 'permission denied', and when I execute the entire command with sudo, I get a trillion errors, all remarkably the same:
/tmp/ccyHSlXv.o: In function `main':
main.cpp:(.text+0x28): undefined reference to `QApplication::QApplication(int&, char**, int)'
main.cpp:(.text+0x3c): undefined reference to `Calculator::Calculator(QWidget*)'
main.cpp:(.text+0x4d): undefined reference to `QApplication::exec()'
main.cpp:(.text+0x67): undefined reference to `QApplication::~QApplication()'
main.cpp:(.text+0x8c): undefined reference to `QApplication::~QApplication()'
/tmp/ccyHSlXv.o: In function `QString::~QString()':
main.cpp:(.text._ZN7QStringD2Ev[_ZN7QStringD5Ev]+0x23): undefined reference to `QString::free(QString::Data*)'
/tmp/ccyHSlXv.o: In function `Calculator::~Calculator()':
main.cpp:(.text._ZN10CalculatorD2Ev[_ZN10CalculatorD5Ev]+0xc): undefined reference to `vtable for Calculator'
main.cpp:(.text._ZN10CalculatorD2Ev[_ZN10CalculatorD5Ev]+0x16): undefined reference to `vtable for Calculator'
main.cpp:(.text._ZN10CalculatorD2Ev[_ZN10CalculatorD5Ev]+0x3d): undefined reference to `QDialog::~QDialog()'
main.cpp:(.text._ZN10CalculatorD2Ev[_ZN10CalculatorD5Ev]+0x75): undefined reference to `QDialog::~QDialog()'
collect2: ld returned 1 exit status
I have absolutely no clue what's wrong. If anyone has had a similar problem getting Qt to work in Arch, please shout out.

I think you need to link it against the qt library? http://ubuntuforums.org/showthread.php?p=11092451
I doubt it's Arch-related.
I would suggest copying the example calculator files to another directory. This is what I've done:
[karol@black foo7]$ qmake calculator.pro
It generates a Makefile
[karol@black foo7]$ ls
total 44K
-rw-r--r-- 1 2,5K 08-04 02:14 button.cpp
-rw-r--r-- 1 2,3K 08-04 02:14 button.h
-rw-r--r-- 1 12K 08-04 02:14 calculator.cpp
-rw-r--r-- 1 3,3K 08-04 02:14 calculator.h
-rw-r--r-- 1 468 08-04 02:14 calculator.pro
-rw-r--r-- 1 2,2K 08-04 02:14 main.cpp
-rw-r--r-- 1 9,6K 08-04 02:16 Makefile
[karol@black foo7]$ make
g++ -c -pipe -march=i686 -mtune=generic -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. -o button.o button.cpp
g++ -c -pipe -march=i686 -mtune=generic -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. -o calculator.o calculator.cpp
g++ -c -pipe -march=i686 -mtune=generic -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. -o main.o main.cpp
/usr/bin/moc -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. button.h -o moc_button.cpp
g++ -c -pipe -march=i686 -mtune=generic -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. -o moc_button.o moc_button.cpp
/usr/bin/moc -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. calculator.h -o moc_calculator.cpp
g++ -c -pipe -march=i686 -mtune=generic -O2 -pipe -fno-strict-aliasing -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++ -I. -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include -I. -o moc_calculator.o moc_calculator.cpp
g++ -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o calculator button.o calculator.o main.o moc_button.o moc_calculator.o -L/usr/lib -lQtGui -lQtCore -lpthread
[karol@black foo7]$ ls
total 148K
-rw-r--r-- 1 2,5K 08-04 02:14 button.cpp
-rw-r--r-- 1 2,3K 08-04 02:14 button.h
-rw-r--r-- 1 1,8K 08-04 02:17 button.o
-rwxr-xr-x 1 43K 08-04 02:17 calculator
-rw-r--r-- 1 12K 08-04 02:14 calculator.cpp
-rw-r--r-- 1 3,3K 08-04 02:14 calculator.h
-rw-r--r-- 1 21K 08-04 02:17 calculator.o
-rw-r--r-- 1 468 08-04 02:14 calculator.pro
-rw-r--r-- 1 2,2K 08-04 02:14 main.cpp
-rw-r--r-- 1 3,2K 08-04 02:17 main.o
-rw-r--r-- 1 9,6K 08-04 02:16 Makefile
-rw-r--r-- 1 2,0K 08-04 02:17 moc_button.cpp
-rw-r--r-- 1 7,4K 08-04 02:17 moc_button.o
-rw-r--r-- 1 3,5K 08-04 02:17 moc_calculator.cpp
-rw-r--r-- 1 9,8K 08-04 02:17 moc_calculator.o
[karol@black foo7]$ ./calculator
Works!
Last edited by karol (2011-08-04 00:23:52)

ERROR:"IBM AIX RISC System/6000 Error: 2: No such file or directory" on RAC

RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/cdrs/rman/back_%p%d.%s' CONNECT 'SYS/pass@bosst1';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/cdrs/rman/back_%p%d.%s' CONNECT 'SYS/pass@bosst2';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/app/oracle/product/9.2/dbs/snapcf_bosst.cf';
RMAN>
RMAN> backup database;
input datafile fno=00038 name=/dev/rvg01_lv032
input datafile fno=00041 name=/dev/rvg01_lv035
input datafile fno=00044 name=/dev/rvg01_lv038
input datafile fno=00047 name=/dev/rvg01_lv041
channel ORA_DISK_2: starting piece 1 at 20-MAY-07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 05/20/2007 10:06:52
ORA-19504: failed to create file "/cdrs/rman/back_1BOSST.13"
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 2: No such file or directory
RMAN>
$ touch /cdrs/rman/back_1BOSST.13
$ ls -l /cdrs/rman
total 0
-rwxr-xr-x 1 oracle dba 0 May 20 09:47 abc
-rw-r--r-- 1 oracle dba 0 May 20 10:50 back_1BOSST.13
$
OS : AIX 5.2 with HACMP cluster
DB: 9.2.0.7
I executed the "Backup database " command on BOSST1.
Would you please tell me where is the problem?
Regards
Faruque

hi,
do you actually have any space on that file system?
rgds
alan

Error 2 - No such File or Directory

I was trying to restore an a time machine archive onto a new drive, as it come to the end I got the following message
Unable to archive 'Name.tar' into 'Time Machine Drive'
(Error 2 - No such file or directory)
I am unfamiliar with time machine so any assistance would be useful.
thanks

Thank you for the reply.
I was helping a friend with their back up and it has just been revealed that its not actually a time machine .tar file im now trying to find research the truth behind the original archiving application.
Thank you for the time

Error 2 - No such file or directory issue with unzipping file

Hi all,
I know ther's been a couple of threads about this already and I can promise you that I have tried it all.
Keep getting Error 2 - No such file or directory
I've downloaded various different software and tried unzipping, tried through Terminal, all of it.
Still, 3 out of 16 files that I downloaded from the same source appear to be corrupted.
Please let me know if anyone of you had this problem and how you solved it?
Thanks a lot

I'm at a loss as to why the files are numbered like that - unless, perhaps, they were zipped by StuffIt Deluxe and segmented? If you try opening the first, unnumbered, archive, do you get the same error message? Maybe ask if StuffIt Deluxe was used - http://www.stuffit.com/mac-deluxe.html. It's pretty expensive for what it does but I can only think, at this point, that the files were zipped and segmented using something.
Clinton

Errors - ORA-01034, ORA-27101 & Linux-x86_64 Error: 2: No such file or dir

I have installed Oracle 10g database and AS 10g on SUSE linux EE 10 (SP2)
When I try to log in as system/system using sqlplus locally on the server, it works fine. However, when I try the following I get error messages:
SQL> conn system/system@botsdb
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I tried the same from my laptop through sqlplus and the error message is the same.
I checked if the database was up and to check this I executed follwing commands whicle still being logged as system/system:
SQL>Select * from v$database;
SQL>Select * from v$instance;
SQL>Select * from tab;
These do bring results. Also if I try to start up the database again, it gives error message that the database is already up. I have restarted the db number of times, checked if my listener was listening on the service BOTSDB and these all seem fine.
It is very intriguing that when @BOTSDB is attached while connecting, the connection fails.
Can someone please guide me to sort this error?
Thanks and kind regards,
Aparna

Hi
I am answering all the three questions here.
1) No of instances on the machine, I understand it is 1.
2) Results of lsnrctl status
oracle@linuxserver:~> lsnrctl status
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 28-JUL-2010 09:19:33
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linuxserv.dcdm.mu)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.4.2 - Production
Start Date 27-JUL-2010 11:24:12
Uptime 0 days 21 hr. 55 min. 20 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10ginfra/network/admin/listener.ora
Listener Log File /oracle/app/ora10ginfra/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=linuxserver.dcdm.mu)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "metarep.dcdm.mu" has 1 instance(s).
Instance "metarep", status READY, has 3 handler(s) for this service...
The command completed successfully
--Note that lsnrctl status command was issued after loading 10ginfra.env file.
Please note that the listener for the database is set as DBLISTENER and lsnrctl status DBLISTENER was executed after loading 10gdb.env file. The results of lsnrctl status DBLISTENER are as follows:
oracle@linuxserver:~> . ./10gdb.env
oracle@linuxserver:~> lsnrctl status DBLISTENER
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 28-JUL-2010 09:24:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.107.123)(PORT=1650)))
STATUS of the LISTENER
Alias DBLISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 27-JUL-2010 15:11:28
Uptime 0 days 18 hr. 13 min. 15 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10gdb/network/admin/listener.ora
Listener Log File /oracle/app/ora10gdb/network/log/dblistener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.107.123)(PORT=1650)))
Services Summary...
Service "BOTSDB" has 1 instance(s).
Instance "BOTSDB", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
3) The output of ps -ef |grep pmon is
oracle@linuxserver:~> ps -ef |grep pmon
oracle 12524 12091 0 09:16 pts/1 00:00:00 grep pmon
oracle 12525 1 0 Jul27 ? 00:00:00 ora_pmon_metarep
oracle 25776 1 0 Jul27 ? 00:00:00 ora_pmon_BOTSDB
The contents of listener.ora in two different Oracle Homes (one for AS infrastrcuture and another one for database) are as follows:
oracle@linuxserver:/oracle/app/ora10ginfra/network/admin> vi listener.ora
# listener.ora Network Configuration File: /oracle/app/ora10ginfra/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10ginfra)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = linuxserv.dcdm.mu)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
oracle@linuxserver:/oracle/app/ora10gdb/network/admin> vi listener.ora
# Generated by Oracle configuration tools.
SID_LIST_DBLISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10gdb/)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = BOTSDB)
(ORACLE_HOME = /oracle/app/ora10gdb/)
DBLISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.107.123)(PORT = 1650))
Kind regards,
Aparna

ORA-27101: shared memory realm does not exist Linux Error: 2: No such file

hello i have a 10 Database R1 installed on Redhat linux AS 4.
i'm having a problem connecting to my database, whenever i try to connect i get the error
ORA-01034: Oracle not available.
ORA-27101 shared memory realm does not exist
Linux Error: 2: No such file or directory.
i checked my startup.log and i found the following after issuing a dbstart.
ORACLE instance started.
Total System Global Area 130023424 bytes
Fixed Size          1218100 bytes
Variable Size          109054412 bytes
Database Buffers     16777216 bytes
Redo Buffers          2973696 bytes
Database mounted.
ORA-01092: ORACLE instance terminated
on dbshut i get the same error message in the shutdown.log
ORA-01034: Oracle not available.
ORA-27101 shared memory realm does not exist
Linux Error: 2: No such file or directory.
my alert_ASYDB.log file has the following
ORA-01534: rollback segment 'R01' doesn't exist
Tue Feb 27 23:14:19 2007
Error 1534 happened during db open, shutting down database
USER: terminating instance due to error 1534
Instance terminated by USER, pid = 3272
ORA-1092 signalled during: ALTER DATABASE OPEN...
in the database creation log, i noticed that this segment could not be created.
i can mount the databse but cannot open it
is there anyway to recreate these segments or any other solution for that?
i have tried to comment the line in initASYDB.ora but dd not work.
regards

Hi,
>>do you recommend using auto undo_management instead of RBS?
Yes. To simplify management of rollback segments, the Oracle9i database introduced Automatic Undo Management (AUM) where the database automatically manages allocation and management of undo (rollback) space among various active sessions. In a database using AUM, all transactions share a single undo tablespace. Any executing transaction can consume free space in this tablespace. Undo space is dynamically transferred from committed transactions to executing transactions in the event of space scarcity in the undo tablespace..The AUM feature also provides a way for administrators to exert control on undo retention. You can specify the amount of undo to be retained in terms of wall clock time (number of seconds). With retention control, you can configure your systems to allow long running queries to execute successfully without encountering ORA-1555 (Snapshot too old) errors ...
For more information, you can take a look on these links below:
http://www.oracle.com/technology/obe/obe10gdb/manage/undoadv/undoadv.htm
http://www.oracle-base.com/articles/9i/AutomaticUndoManagement.php
Cheers

How to resolve this Error ORA-04030: out of process memory when trying to a

Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
Thanks

Hi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas.

Error ORA-04030: out of process memory when trying to allocate 8512 bytes

Good Afternoon estimated
I want to see if anyone has the following problem occurred while there are about 70 concurrent connections to the Oracle instance. if anyone has any solution.
is grateful for the help in advance:
Dump file d:\oracle\data\admin\ppmdb\bdump\ppmdb_mmon_5032.trc
Thu Aug 11 09:23:40 2011
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
Instance name: DBMM
Redo thread mounted by this instance: 1
Oracle process number: 11
Windows thread id: 5032, image: ORACLE.EXE (MMON)
*** 2011-08-11 09:23:40.429
*** SERVICE NAME:(SYS$BACKGROUND) 2011-08-11 09:23:40.413
*** SESSION ID:(161.1) 2011-08-11 09:23:40.413
*** KEWROCISTMTEXEC - encountered error: (ORA-04030: out of process memory when trying to allocate 8512 bytes (pga heap,kgh stack)
*** SQLSTR: total-len=267, dump-len=240,
STR={insert into wrh$_sysmetric_history (snap_id, dbid, instance_number, begin_time, end_time, intsize, group_id, metric_id, value) select :snap_id, :dbid, :instance_number, begtime, endtime, intsize_csec, groupid, metri}
===============
Note: This allows us to continue to connect more users and the only way to make new connections is restarting the instance
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytes
Fixed Size 1299216 bytes
Variable Size 729812208 bytes
Database Buffers 838860800 bytes
Redo Buffers 7086080 bytes
Thank you for your possible help
Claudio T.

804135 wrote:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
Windows NT Version V5.2 Service Pack 2
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytesHave a search on this forum (or google) for the error code, there should be lots of previous discussion on this one.
From no sign of 64-bit in the product banner plus VA (address space) 2 GB (close enough), it looks like the server is running as 32-bit process.
With SGA + PGA (target) adding up to nearly 1900 MB, my guess is you are hitting the 2 GB per process limit.
Lower SGA, it should help in the very short term. For longer term: lower resource demands or start planning for migration to 64-bit.

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
@ Alternatively purchase an Elements 9 or 10. Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
Apologies if I am using this incorrectly. My first time here

Hi. Thanks for coming back to me. I am using Mountain Leopard (OSX 10.6.8). Had major problem and have re-formatted my H/D and re-installing software. Must have lost a file in the process. Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.

Error 2 - No Such File or directory when trying to unarchive tar files

Similar Messages

Maybe you are looking for