Error (2) when updating iPhone 4 to ios 7

Hi all,
I am getting this error when i am trying to update my iPhone 4 to ios 7. Also tried DFU restore. Still no luck.
Any insights is appreciated. Thanks in advance.
Error message reads "iPhone "iPhone" could not be restored. An unknown error occured (2).

Error 2
ASR does not exist on ramdisk or is corrupt/not signed.
you might be downloading the wrong version of iOS 7.0 or downloaded file might be corrupted , try to download again the correct and complete file and retry restoring manually ...
while in itunes press shift and restore button you will be asked to provide the iOS which you wan to update select and see if this works for you.

Similar Messages

Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

Where can I download iTunes 10.5? It's needed when updating iPhone to iOS 5.

Where can I download iTunes 10.5? It's needed when updating iPhone to iOS 5.

iTunes 10.5 is a developer release and is under the Apple Non-Disclosure Agreement and can't be discussed in open forums.

Error message when updating iphone 5 to iOS 8.0.2

I'm getting an error message when trying to install iOS 8.0.2 on my iPhone 5.

MY storage and data are good. I'm connected to wifi. Tried restarting.

Error 3200 when updating iPhone 4 to iOS 5.

Need help.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

Error 3 when updating iphone 5 - firmware issue?

Hello everyone
I am updating my iphone and right at the last minute I am getting an error message pop up on my computer.
Error (3)
I have zero idea what it means, I can not access my phone or get into anything on my phone! I just have the connect to itunes logo on my phone.
I have the latest update of itunes
I have no other sofware on my computer that will conflct with the update
I was simply running the latest update!
The error says:
The Iphone 'iphone' could not be restored. an unknown error occured (3)
when I click more information apple do not even mention it anywhere.
can someone please help??

Hi Rink,
Thanks for using Apple Support Communities. For that particular error, the steps in this article should help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari

Error 3014 when updating iPhone and iPad OS

I keep getting the 3014 error when trying to update the OS on my iPhone 4 and iPad. Tried disabling Windows 7 Firewall and Anti-Virus softwarebut still get the error.

Tried pretty much everything on the list, and still get the error. is it possible that my Wireless ISP is blocking something? I noticed last night that I can no longer upload photos to my Fototime account, or to Facebook

HT201210 help! error -1 when restore iphone 4 ios 5.1.1

hi guys,
when i tried to restore the iphone 4 to ios 5.1.1 today , i surprised with this problem -1

you have a hardware issue. see link to resolve http://support.apple.com/kb/TS3694

Backup time when updating iPhone to IOS 5?

How long did it take for your iPhone/ iPads to finish the backup proccess??

Its becuase over the years of apple claiming that itunes is the anwser to all music problems they have cramed it full of **** and forgotten the point was in the first place. Lets not forget that itunes is nothing more than a directory program and is still slow becuase apple decided they must have their pointless glossy **** plastered everywhere.
Oh wait its ok they have realised this and now allow you to have iOS 5 so you never need to sync it with shity itunes again, but wait don't we need to update it first using itunes of course we do.
Apple tut tut. Your itunes program is cancer on my PC yerp not mac PC.
P.S. you need to sort out the gesture thing on the macbooks talk about ******* pointless. (you can acces the internet by performing a jutsu in front of it)
Twonks!

HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS

Good Morning, this morning I received the following error message when the iPhone connected to iTunes: itunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635) iphone 3gs with IOS 5. any ideas? thx

Hello,
this morning I received the following error message when the iPhone connected to iTunes: i
tunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635)
any ideas? thx

I get the same error (although in Dutch ;-)).
It also says something like (I'm translating): "Make sure your network settings are correct and your networkconnection is active or try again later." Is there a way to find out these "correct networksettings"?
I now get it for a week, eacht time I connect my iPhone to itunes...

Error 51 when upgrading iphone 6 to ios 8.1.3.

looks like the serial number is lost when preparing the phone for the update. can't be verified by apple servers. tried to restore. nothing; still not recognized. tried dfu, same result. basically, i have a large, expensive brick

getting error 51 when upgrading iphone 6 to ios 8.1.3. sorry, i repeated myself

Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3

I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro.

HT1766 error 8000067 when updating version 5.1 on ipad1..what to do?

Error 8000067 when updating version 5.1 on Ipad. please help to avaoid to loose everything. thanks and regards

iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

I have a problem when updating applications on iOS 7.0.2

I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english

I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
Not sure if I can just hit Ignore and go on????
Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform.

Error (2) when updating iPhone 4 to ios 7

Similar Messages

Maybe you are looking for