Error 20 - no data for last 10 seconds
Does anyone else receive this error? I v/c with a powerbook G4 user with mac os x user with the same ichat version, but every once in awhile the chat session is automatically cancelled indicating Error-20:
2007-02-12 13:48:33 +0800: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.37.129.2:16386, expecting remote machine to send to 219.79.203.111:16386
Video channel info: local machine using 10.37.129.2:16384, expecting remote machine to send to 219.79.203.111:16384
What settings do I need to change to prevent this from happening? Thanks!
macbook Mac OS X (10.4.8)
Error 20,
Does your modem have a QoS DoS Or SPI firewall ?
Quality of Service
Denial of Service or
Stateful Packet Inspection
10:06 PM Wednesday; February 14, 2007
Similar Messages
-
I must find my find my iphone data for last 1 year please help me
i must find my find my iphone data for last 1 year please help me
I confirmed, I have turned on " find my iphone. Here is the error I encountered
-
Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hello,
EBS version : 11.5.10.2
DB version : 11.2.0.3
OS version : AIX 6.1
As a part of 11.5.10.2 to R12.1.1 upgrade, while applying merged 12.1.1 upgrade driver(u6678700.drv), we got below error :
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers either have failed or are waiting:
FAILED: file glsupdas.ldt on worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 adwork003.log
Restarting job that failed and was fixed.
Time when worker restarted job: Wed Aug 07 2013 10:36:14
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
Error calling FNDLOAD function.
Time when worker failed: Wed Aug 07 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 US_glsupdas_ldt.log
Current system time is Wed Aug 7 10:36:14 2013
Uploading from the data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to staging tables
Dumping LCT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0) into FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS , GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called
Concurrent request completed
Current system time is Wed Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Below is info about file versions and INVALID packages related to GL.
PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG is invalid with error component 'GL_DEFAS_DBNAME_S' must be declared.
I can see GL_DEFAS_DBNAME_S is a VALID sequence accessible by apps user with or without specifying GL as owner.
SQL> select text from dba_source where name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG') and line=2;
TEXT
/* $Header: glistdds.pls 120.4 2005/05/05 01:23:16 kvora ship $ */
/* $Header: glistddb.pls 120.16 2006/04/10 21:28:48 cma ship $ */
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
SQL> select * from all_objects where object_name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG')
2 ; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1118545 PACKAGE 05-AUG-13 05-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1118548 PACKAGE 05-AUG-13 06-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1128507 PACKAGE BODY 05-AUG-13 06-AUG-13 2013-08-06:12:56:50 INVALID N N N 2
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1128508 PACKAGE BODY 05-AUG-13 05-AUG-13 2013-08-05:19:43:51 VALID N N N 2
SQL> select * from all_objects where object_name='GL_DEFAS_DBNAME_S'; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
GL GL_DEFAS_DBNAME_S 1087285 SEQUENCE 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
APPS GL_DEFAS_DBNAME_S 1087299 SYNONYM 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
SQL> conn apps/apps
Connected.
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
FROM DBA_OBJECTS
WHERE OBJECT_NAME = 'GL_DEFAS_ACCESS_SETS_PKG'; 2 3 OWNER OBJECT_NAME OBJECT_TYPE STATUS
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE VALID
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE BODY INVALID SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE; Warning: Package altered with compilation errors. SQL> show error
No errors.
SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE BODY; Warning: Package Body altered with compilation errors. SQL> show error
Errors for PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG: LINE/COL ERROR
39/17 PLS-00302: component 'GL_DEFAS_DBNAME_S' must be declared
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>cat $GL_TOP/patch/115/sql/glistdab.pls|grep -n GL_DEFAS_DBNAME_S
68: SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
81: fnd_message.set_token('SEQUENCE', 'GL_DEFAS_DBNAME_S');
SQL> show user
USER is "APPS"
SQL> SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
FROM dual; 2 -- with GL.
NEXTVAL
1002
SQL> SELECT GL_DEFAS_DBNAME_S.NEXTVAL from dual; --without GL. or using synonym.
NEXTVAL
1003
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdab.pls|grep '$Header'
REM | $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ |
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdas.pls |grep '$Header'
REM | $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ |
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */ -
Hello Experts,
CAN you please help me Regarding this error ,its very urjent for me.
The problem is we are not able to create timesheet through ESS CATW transaction. In the below the link to the ESS Create Time sheet CATW is giving. Use the link to enter the ESS timesheet. Ignore all columns and use only A/A column and give any leave type. When we enter the timesheet with A/A any vacation type and give number of hours and when we try to save or save and release button it gives a error message and it locks the user.
The error message it gives is :
<b>SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)</b>
Please Help me ....
Thank you and regards,
Durga.KHi Durga,
We have exactly the same error. Were you able to fix this? Any help is appreciated.
Thanks,
Doug -
'Data for last import/Statistics' tab missing for Distributed imports in EMIGALL
Hi experts,
For some reason when I initiate Distributed loads using 'Distributed imports' in EMIGALL, I do not get the third and fourth tabs viz. 'Data for last import' and 'Statistics for import runs' after the loads are triggered. Is there a specific Note that needs to be applied. I checked Notes like 1179843, 780996 however they were relevant for previous releases and I am currently on release 605. Any insights to this problem?
Thanks,
Caroline.SharedObjects does the trick nicely!
-
hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error message: The data for filename was already added to the form
I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio:http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang -
Dear experts!
I use internet service transaction catw in release 6.0 and the following error occurs:
System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10) .
Thank you in advance!
Vana SountaCATw is not supported in ECC 600 , You need to use new service of CATS, called record working time
Please read the note 870126 and also refer help.sap.com about record working time -
Hi Exters
I am getting error like this System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10) .Can anyone help me.
Thanks & Regards
SandyaHi !
I have the same error "System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)".
How did you solve it?
Thank you in advance!
Vana Sounta -
Sysfail error "Enter Valid date for Example(02/25/2008) " in EC5
Hi ,
I have a sysfail error "Enter Valid date for Example(02/25/2008) " in the EC5 side.Can any one help me on this .What should I do and where can be the fault.This EC5 is the development system.Hi
you have to pass the date in the format as yyyymmdd
bcoz for internal storage the SAP system always understand the standard data format
yyyyymmdd.
so you have to pass the date in the format yyyymmdd.
Thanks
Rinku -
Hi All,
I have a simple query which is below:-
Declare @reportdate date
set @reportdate= (DATEADD(dd,-5,getdate()))
select * from dbo.Table
where date IN (@reportdate)
I need this query to pull the data for the last 3rd business day .So lets say today is monday then i need the data for last week wednesday which is 3 business days back from monday, if today is a tuesday it would be for last thursday ( as 3 business days for
tuesday would be thursday). But if today is wednesday then i need to be last 3rd business day which is last friday and i also need to get the data for saturday and sunday.
Can someone please help me how cani change my filter to do this?
Please let me know if i am still unclear.
ThanksHi SqlDev12,
Based on my understanding on your requirement, you can reference the below sample.
CREATE TABLE BusinessTable
Bdate DATE,
Wd VARCHAR(10)
;WITH Cte(DT,WD) AS
SELECT CAST('20150401' AS DATE),DATENAME(WEEKDAY,CAST('20150401' AS DATE))
UNION ALL
SELECT DATEADD(DAY,1,DT),DATENAME(WEEKDAY,DATEADD(DAY,1,DT)) FROM Cte
WHERE DT<GETDATE()
INSERT INTO BusinessTable SELECT * FROM Cte
SELECT * FROM BusinessTable
SET DATEFIRST 7 -- Set Sunday as the first day of a week
DECLARE @givenDay DATE ='20150415' --Wednesday
SELECT * FROM BusinessTable
WHERE Bdate BETWEEN
--For Monday and Sunday, select last wednesday
(CASE WHEN DATEPART(WEEKDAY,@givenDay) IN(1,2) THEN DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay)-1,0))
--For Tuesday and Wednesday, last week's Thursday and Friday
WHEN DATEPART(WEEKDAY,@givenDay) IN(3,4) THEN DATEADD(DAY,-5,@givenDay)
--For Thursday and Friday, current week's Monday and Tuesday
WHEN DATEPART(WEEKDAY,@givenDay) IN(5,6) THEN DATEADD(DAY,-3,@givenDay)
--For Saturday, current week's Wednesday
ELSE DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay),0)) END)
AND
(CASE WHEN DATEPART(WEEKDAY,@givenDay) IN(1,2) THEN DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay)-1,0))
WHEN DATEPART(WEEKDAY,@givenDay) IN(3) THEN DATEADD(DAY,-5,@givenDay)
WHEN DATEPART(WEEKDAY,@givenDay) IN(4) THEN DATEADD(DAY,-3,@givenDay)
WHEN DATEPART(WEEKDAY,@givenDay) IN(5,6) THEN DATEADD(DAY,-3,@givenDay)
ELSE DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay),0)) END)
DROP TABLE BusinessTable
If you have any feedback on our support, you can click
here.
Eric Zhang
TechNet Community Support -
No data in last 10 seconds.......
Hi,
when I tried to connect with my friend, theres always a message.....no data received in the last 10 seconds..........and we cant video....chat what could be the cause and solution for this?
thanks in advance
AndreThe issues can be caused by two problems.
1) The Router or modem at the far end has a security feature that cuts the iChat port as it sees the amount of data as an Internet attack.
(Turn the feature Off)
2) ichat thinks there is enough bandwidth but then finds there is not.
This can come down to a marginal Internet connection speed that then has Web Browsing and mail open or even a Dashboard widget that is also using the internet even intermittently like mail that catches things out
Setting System Preferences > Quicktime > Streaming to 1.5Mbps will also help stop the connection being capped for iChat
10:25 PM Thursday; March 6, 2008 -
Error While loading data for LIS InfoSources.
Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
JayHi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj -
Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12
Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind
Maybe you are looking for
-
App World not Workign since upgrade
We upgrade Blackberry app world to my daughter's Curve and registered, now she cannot download anything, it keeps taking her to her profile page. We went to the closest blackberry provider and we were told there is a problem with App World after it u
-
Spotlight still not what it used to be...
In Tiger, spotlight gave you a nice neat list of the search results split into different sections depending on the document type. This was great for searching images because it'd also give you thumbnails instantly just for the images. Since Leopard,
-
how do i delte my credit card off my ipod
-
I have a login bean that verify's the user and on successful login, sets the bean in a session variable. Each page will then access the bean to verify the user. When there is no activity in the browser, the session expires, and the user has to log in
-
Hi, I am trying to make the WMS servlet filter work, without success. I got my own datasource with styles/themes etc, and I am able to genereate previews using mapclient.jsp. GetCapabilities seems correct to me: <Layer> <Name>WMS</Name> <Title>Oracle