Error: -20001 IS Final Approver in SSHR

Hi Experts
In the approval process i got Exception. looking at it telling me: This approver hdoes nor have an entry in wf_roles.
1. How can i find the wf_roles for the approver???
Thanks in advance

Most probably the error means, that there is no user assigned to the person who is suppose to get the notification. So create a user for the person and see if that resolves the issue

Similar Messages

  • Self Service request is going to error after final Approver.

    Hi,
    Here we configured leave system through EIT and we are using self service (EIT) to make leave request. We have 3 level of approver for Annual Leave. Problem here is after final approver (3rd approver) approves the leave then request is going in to error. I traced the item key through Workflow Administrator > Status Monitor.
    The error is Details are given below (Status Monitor)
    Failed Activity     
    Notify HR About Commit Application Error
    Activity Type     
    Notice
    Error Name     
    WFNTF_ROLE
    Error Message     
    3205: '[email protected]' is not a valid role or user name.
    Error Stack     
    Wf_Notification.Send([email protected], HRSSA, HR_EMBED_DEPT_COMMAPPLERR_MSG, WF_ENGINE.CB) Wf_Engine_Util.Notification_Send(HRSSA, 1649471, 195663, HRSSA:HR_EMBED_DEPT_COMMAPPLERR_MSG) Wf_Engine_Util.Notification(HRSSA, 1649471, 195663, RUN)
    I appreciate if someone can help me.
    Regards,
    Jojo George

    Okay, if the $PROFILES$ reference has been working for a long time that doesn't sound like a problem. I would then suggest this is an unusual data scenario where the value the user selected was temporarily available. Don't ask me how - it's your data! The user that submitted it might be able to shed some light. For example, this kind of thing might do it:
    1) Manager logs on to ESS, starts an SIT transaction (the one in question) and Saves for Later. This sets $PROFILES$.PER_PERSON_ID to themself.
    2) Manager then switches to MSS and views one of their employees - this sets $PROFILES$.PER_PERSON_ID to their employee, not themselves.
    3) Manager then navigates to Homepage and continues the Saved for Later transaction from the Worklist (ie, without clicking on the ESS responsibility). Perhaps $PROFILES$.PER_PERSON_ID is still set to their direct report rather than themselves?
    4) Manager then selects one of their employees contracts rather than their own (because of $PROFILES$.PER_PERSON_ID being wrong).
    5) Manager submits the transaction.
    I don't know if that's possible or even if that's how it behaves. But it sounds plausible and is an example of perhaps the weird set of circumstances that might have happened here. Regardless, I'd still maintain that this value was available to the user in the Value Set at the time they submitted it.
    If it's just a one-off data problem and this has been working fine for a while I wouldn't worry about it. Bin the workflow, get the employee to re-submit. Job done.

  • Error when creating Final Accounting Post to GL in AR

    Hello,
    I currently getting an error while creating Final Accounting Post to GL
    I have changed the Profile Option SLA: Enable Trace to <null> as mentioned in the solution on metalink. But still I'm getting this error.
    If anyone has encountered the error(LOG) below; please reply me as soon as possible
    thanks
    mevin
    THE LOG
    Subledger Accounting: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XLAACCPB module: Create Accounting
    Current system time is 14-AUG-2009 09:36:54
    XDO Data Engine Version No: 5.6.3
    Resp: 50832
    Org ID : 102
    Request ID: 499751
    All Parameters: P_APPLICATION_ID=222:P_SOURCE_APPLICATION_ID=:P_DUMMY=:P_LEDGER_ID=2089:P_PROCESS_CATEGORY_CODE=:P_END_DATE=:P_CREATE_ACCOUNTING_FLAG=N:P_DUMMY_PARAM_1=:P_ACCOUNTING_MODE=:P_DUMMY_PARAM_2=:P_ERRORS_ONLY_FLAG=N:P_REPORT_STYLE=D:P_TRANSFER_TO_GL_FLAG=Y:P_DUMMY_PARAM_3=:P_POST_IN_GL_FLAG=Y:P_GL_BATCH_NAME=:P_MIN_PRECISION=2:P_INCLUDE_ZERO_AMOUNT_LINES=:P_REQUEST_ID=:P_ENTITY_ID=118514:P_SOURCE_APPLICATION_NAME=:P_APPLICATION_NAME=:P_LEDGER_NAME=:P_PROCESS_CATEGORY_NAME=:P_CREATE_ACCOUNTING=:P_ACCOUNTING_MODE_NAME=:P_ERRORS_ONLY=:P_ACCOUNTING_REPORT_LEVEL=:P_TRANSFER_TO_GL=:P_POST_IN_GL=:P_INCLUDE_ZERO_AMT_LINES=:P_VALUATION_METHOD_CODE=:P_SECURITY_INT_1=:P_SECURITY_INT_2=:P_SECURITY_INT_3=:P_SECURITY_CHAR_1=:P_SECURITY_CHAR_2=:P_SECURITY_CHAR_3=:P_CONC_REQUEST_ID=:P_INCLUDE_USER_TRX_ID_FLAG=:P_INCLUDE_USER_TRX_IDENTIFIERS=:P_USER_ID=:DebugFlag=
    Data Template Code: XLAACCPB
    Data Template Application Short Name: XLA
    Debug Flag:
    {P_ACCOUNTING_REPORT_LEVEL=, P_DUMMY=, P_ACCOUNTING_MODE_NAME=, P_ERRORS_ONLY_FLAG=N, P_REPORT_STYLE=D, P_GL_BATCH_NAME=, P_END_DATE=, P_SECURITY_INT_3=, P_SECURITY_INT_2=, P_SECURITY_INT_1=, P_VALUATION_METHOD_CODE=, P_POST_IN_GL=, P_TRANSFER_TO_GL=, P_TRANSFER_TO_GL_FLAG=Y, P_INCLUDE_USER_TRX_IDENTIFIERS=, P_USER_ID=, P_PROCESS_CATEGORY_NAME=, P_ERRORS_ONLY=, P_DUMMY_PARAM_3=, P_SECURITY_CHAR_3=, P_DUMMY_PARAM_2=, P_SECURITY_CHAR_2=, P_DUMMY_PARAM_1=, P_SECURITY_CHAR_1=, P_ENTITY_ID=118514, P_PROCESS_CATEGORY_CODE=, P_INCLUDE_ZERO_AMT_LINES=, P_LEDGER_ID=2089, P_POST_IN_GL_FLAG=Y, P_APPLICATION_ID=222, P_INCLUDE_USER_TRX_ID_FLAG=, P_APPLICATION_NAME=, P_REQUEST_ID=, P_CONC_REQUEST_ID=, P_LEDGER_NAME=, P_SOURCE_APPLICATION_ID=, P_CREATE_ACCOUNTING=, P_CREATE_ACCOUNTING_FLAG=N, P_MIN_PRECISION=2, P_SOURCE_APPLICATION_NAME=, P_INCLUDE_ZERO_AMOUNT_LINES=, P_ACCOUNTING_MODE=}
    Calling XDO Data Engine...
    [081409_093744202][][EXCEPTION] SQLException encounter while executing data trigger....
    java.sql.SQLException: ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_create_acct_rpt_pvt.BeforeReport . ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_accounting_pkg.accounting_program_document. ORA-01086: savepoint 'SP_EVENTS' never established
    ORA-20001: -: XLA-95103: An internal
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 110
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 289
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 162
    ORA-06512: at "APPS.XLA_CREATE_ACCT_RPT_PVT", line 262
    ORA-06512: at line 4
         at java.lang.Throwable.<init>(Throwable.java:57)
         at java.lang.Throwable.<init>(Throwable.java:68)
         at java.sql.SQLException.<init>(SQLException.java:55)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:215)
         at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:965)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1170)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3445)
         at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4394)
         at oracle.apps.xdo.dataengine.XMLPGEN.executeTriggers(XMLPGEN.java:699)
         at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:255)
         at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:205)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:237)
         at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:364)
         at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
         at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
    Start of log messages from FND_FILE
    14-AUG-2009 09:37:19 - Beginning of the Report
    GL Inerface tablename = GL_INTERFACE
    GL Inerface tablename = GL_INTERFACE
    tablename = GL_INTERFACE
    14-AUG-2009 09:37:19- Submitting the Journal Import
    GL Inerface tablename = GL_INTERFACE
    GL Inerface tablename = GL_INTERFACE
    tablename = GL_INTERFACE
    14-AUG-2009 09:37:19- Submitting the Journal Import
    14-AUG-2009 09:37:44- Journal Import completed
    ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_create_acct_rpt_pvt.BeforeReport . ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_accounting_pkg.accounting_program_document. ORA-01086: savepoint 'SP_EVENTS' never established
    ORA-20001: -: XLA-95103: An internal
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 110
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 289
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 162
    ORA-06512: at "APPS.XLA_CREATE_ACCT_RPT_PVT", line 262
    ORA-06512: at line 4
    End of log messages from FND_FILE
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 14-AUG-2009 09:37:45
    ---------------------------------------------------------------------------

    select * from gl_je_sources_tl;
    main columns to look at are:
    IMPORT_USING_KEY_FLAG
    je_source_name
    je_source_key
    user_je_source_name
    select * from gl_je_categories;
    main columns to look at are:
    je_category_key
    user_je_category_name
    If import_using_key_flag is Y for your je_source (Receivables), for the application (222) you are running Create Accounting in Final Post Mode, then apply the patch 8568620
    By
    Vamsi

  • What is the IDOC for Final Approval of PO

    Hi,
    Can any one tell me ..
    1. what is the IDOC for Final Approval of Purchase Order?
    2. Is there any Separate IDOCs for GRN(Goods Receipts
    Note) in Transaction MIGO. Like Creation of GRN,
    Changing of GRN, Cancelling of GRN, Transfering materials to Scrap or Cost center (Changing of Movement types in MIGO).
    regards,
    Khaja.

    Khaja,
    1. There is no separate IDOC for final approval of a PO. IF you have configured a release stratgey for a PO, the PO IDOC will be transmitted only upon the final apporval of the PO.
    2. Yes there should be a IDOC for Goods Receipt.
    Regards,
    Ravi
    Note : Please mark the helpful answers

  • About Multi-ORG for EBS R12.1.1 .. Oracle error -20001 ORA-20001 APP-FND-02

    I have two questions:
    1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.
    2. Is there any step-by-step process to set up multi-org?
    I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.
    Thanks

    1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.Yes.
    2. Is there any step-by-step process to set up multi-org?https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.Does this happen to all responsibilities?
    Please see the steps in (ORA-20001: APP-FND-02901 Errors Encountered When "Requests" Tab is Selected from PFT or EPF [ID 859072.1]) to set the profile option at the responsibility level for the responsibility you are trying to access.
    Thanks,
    Hussein

  • FYI Notification after final approval using AME

    Hi,
    We have a requirement where we need to send a FYI notification to a group of people after final approval. Could you please guide if it can be done with the help of AME or not.
    If yes can you please tell me the detail steps.
    Regards,
    Rakesh.

    Hi Rakesh,
    - you can create another rule in AME with the same conditions as your main rule.
    - Make sure the rule type is For Your Information.
    - Create approval groups for the people you want to send the FYI notification to and add these approval groups to the rule (using Post Approval as action type)
    - Make sure the order number of your new approval group is higher than the order number of the approval groups in your main rule. This will ensure that the FYI notification goes in the end and not somewhere in the middle.
    Thanks
    Shailendra

  • PO as attachment on final Approval

    Hi All,
    I have a requirement where i have to send PO as an attachment to PO creator when final approval is done.
    Here i cannot run a driver program and create a PDF of smartform and attach it to workitem in a background task  as we are using standard driver program(which picks up values from system at run time and pass them to smartform when print command is given).
    Also finding all the variables used to print the smartform via a background task will require lots of coding..
    Any suggestions how to do it??
    Regards,
    Sangvir SIngh

    You can make use of the functionality that is performed from
    GOS->Send->Send object with Notes
    or you can try to use standard configuration to send PO which will be configured by fnal experts.
    Thanks
    Arghadip

  • Error at submit for approval in partner program

    Hi All,
    I am created the partner program in r12 and when i click the submit for approval i receive this error
    Start :Item Type : AMSGAPP Item key : CONCEPTPRGT140282
    Invalid Workflow Role for Approver
    send me the solution for it as soon as possible
    Thanks
    Edited by: user12235518 on Mar 8, 2012 4:36 AM

    user12235518 wrote:
    Hi All,
    I am created the partner program in r12 and when i click the submit for approval i receive this error
    Start :Item Type : AMSGAPP Item key : CONCEPTPRGT140282
    Invalid Workflow Role for Approver
    send me the solution for it as soon as possiblePlease see if these docs help.
    Budget Allocation or Offer Approval Error: "Invalid Workflow Role for Approver" [ID 414053.1]
    Invalid Workflow Role For Approver Error When Trying To Approve A Deliverable In Marketing [ID 181484.1]
    Unable To Approve Quota With Error : AMSGAPP Invalid Workflow Role for Approver [ID 422910.1]
    Error when Generating Invite List of Oneoff Event [ID 266349.1]
    Errors Occuring During Claim Approval [ID 1361361.1]
    Thanks,
    Hussein

  • ORACLE error 20001 in FDPSTP

    Hi
    In select statement i used view TPC_ORDER_REPORT_V
    Previously report runs without error,
    but i have changed view i.e. removed one column from this view , and when try to run it gives following error
    **Starts**17-JAN-2013 13:25:06
    ORACLE error 20001 in FDPSTP
    Cause: FDPSTP failed due to ORA-20001:
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.TPC_ORDER_REPORTS_PKG", line 715
    ORA-06512: at line 1
    The SQL statement being executed at the time of the error was: S
    Can anyone help me to resolve it
    Thanks,
    Sunil
    Edited by: 973411 on Jan 16, 2013 10:44 PM
    Edited by: 973411 on Jan 16, 2013 10:45 PM

    Hi Kishore,
    I have executed your query
    select * from dba_objects where status='INVALID' and object_name='TPC_ORDER_REPORTS_PKG';
    Result : Blank record
    Means not any row fetch. I have checked executing following query.
    select * from dba_objects where status='VALID' and object_name='TPC_ORDER_REPORTS_PKG';
    result:
    OWNER     OBJECT_NAME     SUBOBJECT_NAME     OBJECT_ID     DATA_OBJECT_ID     OBJECT_TYPE     CREATED     LAST_DDL_TIME     TIMESTAMP     STATUS     TEMPORARY     GENERATED     SECONDARY
    APPS     TPC_ORDER_REPORTS_PKG          571808          PACKAGE     1/13/2011 8:53:20 PM     1/7/2013 6:10:40 AM     2013-01-07:06:10:40     VALID N     N N
    APPS     TPC_ORDER_REPORTS_PKG          571811          PACKAGE BODY     1/13/2011 9:18:15 PM     1/15/2013 8:02:03 PM     2013-01-15:20:02:03     VALID     N     N     N
    Hence I sure package is valid .......
    Edited by: 973411 on Jan 21, 2013 4:05 AM
    Edited by: 973411 on Jan 21, 2013 4:06 AM

  • ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set

    ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set_nls.
    this error generates everytime when i run a apex application
    i did call the package in session state with  dbms_session.set_nls('NLS_LANGUAGE','AMERICAN'); but still it shows the error in the report any solution please

    Hi Amrit
    Can you put the FND_GLOBAL calls in a pre map trigger/process rather than as part of the map?
    Cheers
    David

  • Final Approver setup in AME and NO TIMEOUT

    Hi Expert,
    Pls help on below.
    We have setup approval group with HR People hierarchy type in AME for quote approval with A as the only (First) approver in the approval group. If the HR Supervisor hierarchy is A<B<C<D,
    then we have to designate as C as Final Approver. So the approval group start the approver list from A will identify next approver based on the Supervisor hierarchy and should consider C as final approver. Approval from any approver, quote should be approved, SHOULD NOT EXPECT APPROVAL FROM ALL APPROVERS.
    Also, how do we make notification should not TIMEOUT at the FINAL APPROVER and should remain for PENDING for Approval
    Regards,
    Ram

    Hi Expert,
    Pls help on below.
    We have setup approval group with HR People hierarchy type in AME for quote approval with A as the only (First) approver in the approval group. If the HR Supervisor hierarchy is A<B<C<D,
    then we have to designate as C as Final Approver. So the approval group start the approver list from A will identify next approver based on the Supervisor hierarchy and should consider C as final approver. Approval from any approver, quote should be approved, SHOULD NOT EXPECT APPROVAL FROM ALL APPROVERS.
    Also, how do we make notification should not TIMEOUT at the FINAL APPROVER and should remain for PENDING for Approval
    Regards,
    Ram

  • Error message when finalizing...file already open with write protection

    I just created my first movie in i Movie. It's about 9 minutes long. When I tried to finalize it it worked for a couple of hours and then came up with a message "unable to prepare project for publishing because an error occurred (file already open with write protection)". What does this mean? I thought I had closed all the files I was using. There was no error number. I tried it 3 times and got the same message. Any thoughts would be greatly appreciated.

    AppleMan, I just checked that and it looks like Time Machine isn't open. I checked it by going to finder>applications>R click on time machine. It gave me the option to "open" which makes me think it's already closed. Is there somewhere else I need to be looking?
    I made another movie that was just a couple of clips and it finalized fine. On that movie, I had some MTS clips and I converted them to mp4's so iMovie could read them.
    In the one that didn't work I did clip one of the movies before I imported it into iMovie. It saved as a .mov instead of a .mp4. Would that make a difference? I checked all of the files and none of them are listed as locked, so I really don't get the "write protected" aspect of this error.

  • Error in setting final variable using properties vs hard coding

    I am getting the following error when trying to use this line of code
    public static final String MESSAGES_BUNDLE_NAME = System.getProperty("messages");
    java.lang.ExceptionInInitializerError: java.lang.NullPointerException
    When I change the above line to
    public static final String MESSAGES_BUNDLE_NAME = "messages_usa";
    the program works fine.
    Any ideas as to why this is happening would be greatly appreciated.
    Thanks,
    Boris

    I am sorry, but I realized now that I did notdiscribe
    the problem fully.
    The error is happening on the following line
    return APPLICATION_RESOURCE_BUNDLE.getString(key);
    So it looks like APPLICATION_RESOURCE_BUNDLE is
    becoming null.
    No that is not what is happening.
    This is the error that you posted.....
    java.lang.ExceptionInInitializerError:
    java.lang.NullPointerException
    The first part is the exception, not the second part
    (although the second causes the first.)
    The java docs specifically point out that a
    NullPointerException is returned if the base name is
    null - the parameter to getBundle().
    The initialization exception occurs because when it
    tries to excecute the initialization expression for
    the final, then the getBundle() is throwing the null
    pointer exception.
    It is is not clear what you code is actually supposed
    to be doing but I think you suggested that your are
    using a system property. If so then it means that
    that system property is not defined. And it works
    when you use a hard coded value because the hard coded
    value is defined.From this explanation I don't understand why initializing the bundle name from System.getProperty() works in the same class with the bundle obejct initialization, but does not work when it is in another class from bundle object initialization.

  • Error while opening AME Approval Function

    Hi All
    I am trying to open the AME "Approvals" Function in R12 Vision Instance and I am getting the following Error.
    The requested URL /pls/VIS/OracleSSWA.Execute was not found on this server.
    Seeded approval functionality for iRec is working fine.
    I am logging in with a vision instance user only with a seeded responsibility "FED AME Application Administrator".
    I checked the function details but could not make out any thing. Here are the function details
    Function: AME_WEB_APPROVALS
    User Function Name: Approvals Management
    Properties:
    Type: SSWA plsql function that opens a new window (Kiosk Mode)
    Maintenance Support Mode: None
    Context Dependence: Responsibility
    Web HTML
    HTML Call: ame_rules_ui.listRulesForm1
    Web Host:
    Encrypt Parameters: Checked
    Have you got any of these issues.
    Thanks
    Gaurav

    In R12 old AME functionality will not work. Old AME pages as in 11.5.10, AME.A are built using mod PL/SQL. But in R12 mod PL/SQL is not supported. In R12 all the AME pages are build using OA Framework now and using RBAC mechanism for assigning responsibilities.
    For setting up AME Rules in R12 one can follow the following note
    Approvals Management Responsibilities and Setups in AME.B
    https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=434567.1&blackframe=1
    Following are the error you might get while opening the AME Approval function from old responsibility.
    1.
    The requested URL /pls/VIS/OracleSSWA.Execute was not found on this server.
    OR
    2.
    Can not access function AME_WEB_APPROVALS. This installation does not manage mode pl/sql. Please contact your System Administrator.
    Regards
    Gaurav

  • Getting an Error while trying to Approve Requisition in SAP Fiori PR Approval App

    Hi Experts,
                   We have followed all the instructions given in the installation/configuration of SAP Fiori PR APPROVAL APP. While approving the PR from Lunchpad we are getting the following error.
    ERROR :"RFC Error : Internal program error; (SAPMSSY1 ZCL_IM_ME_PROCESS_REQ_CTSD====CP 1 CBRC_EXIT_47_PURREQ)"
    2) I have put a debugger in the USER_EXIT : "CBRC_EXIT_47_PURREQ" and checked that the value of SY_UCOM is initial and when i store the value "MESAVE" and run through debugging i am able to approve the PR. I want to get rid of this Debugging mode and run the PR APP from Launchpad properly without error.
    Attached are the three screenshots for more referenece.
    Kindly help me with the same.
    Thanks & Regards:
    AZhar

    Am i getting this Error for the below reason?..
    Because i am also getting the Same Error as the error in the below post.
    POST "Fiori - Approve Purchase Requisition Error"
    Please find the attached error screenshot and confirm.
    Thanks & Regards:
    Azhar

Maybe you are looking for