Error 200019 encoder

Hy,
I am sampling 3 analog channel with an external sample clock from quadrature encoder (via a pulse per each falling and rising edge of the channel A and B). When I go over 50 Khz I have the Error 200019. How is it possible? I have a PCI6221 250KS/s. I have set 80k to the sample rate(80k*3<250k).Is it possible that the pulse wich go to the PFI line is too thin?basically is a pulse of 1 microsecond,indipendetly of the speed. Can i solve the problem if I enlarge the pulse?
thank u guys,is a bit urgent so...please help

Hello orsogna,
error 200019 usually occurs due to higher sample rate or due to lower buffer size.As you've already rightly said , 6221 has a max sample rate of 250kS/sec/all channels, so if you use 3 Analog Input Channels, the maximum rate you can achieve is 83.33 kS/sec for each channel. Also, an other thing you should consider is your buffer size. Even though the clock is external, the rate specified in the task configuration determines the buffer size and other task parameters. Below I am sending you a KnowledgeBase article that I found while searching for the occured error.Please let us know if this solved your problem!
http://digital.ni.com/public.nsf/websearch/A01AA72779C4604986257047007344EC?OpenDocument
Best regards
Antonios

Similar Messages

Error srating encoder

I have been using Encore 2 now for some time with no problems. However, my latest project gets the above error when I try to render or build it. I have tested with other projects and all is well and so I know it is a problem with my project and not the app but the project is quite complex and so I do not want to start all over again.
Can anybody hasn't a guess as to where to start based on the limited info - I assume I have some video issue somehwre but I have encoded all the files excatly the same as I have before and never had this problem.

Hello orsogna,
error 200019 usually occurs due to higher sample rate or due to lower buffer size.As you've already rightly said , 6221 has a max sample rate of 250kS/sec/all channels, so if you use 3 Analog Input Channels, the maximum rate you can achieve is 83.33 kS/sec for each channel. Also, an other thing you should consider is your buffer size. Even though the clock is external, the rate specified in the task configuration determines the buffer size and other task parameters. Below I am sending you a KnowledgeBase article that I found while searching for the occured error.Please let us know if this solved your problem!
http://digital.ni.com/public.nsf/websearch/A01AA72779C4604986257047007344EC?OpenDocument
Best regards
Antonios

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

ERROR WHILE ENCODING FILE

Hi Everyone
While burning a DVDSP3 disk of about 3.5 gigs, I get this error message: "error while encoding file". This happens about 7 hours into the burn. I have tried it twice. The second time after fixing preferences, etc.
I am using a G-4 laptop with a Lacie RAID 5 external drive.
Reading this forum, I see the problem is not unusual. But I never encountered this problem in the past.
So why is this happening now?
Also, to fix it the most frequent suggestion is to export from FCP-4 using compressor.
Does this solve the problem?
And what preset should I use?
The compressor help menu has a lot of information but does not specifically tell you what preset to use for a standard DVD-R burned on DVD SP 3.
The DVD-R, like most DVD's, has to play on any NTSC television or any computer.
If anyone can help me with this, I would greatly appreciate it. Because I am stumped.

On the pane issue, it will be different because you are running an earlier version of Compressor.
On the A.Pack side of things when you launch the Application you will see tabs where you can set the same things in the image on the website (dialog normalization to -31 etc.) Let me know if you find them, or I can get some screenshots
On the settings you can try one of the settings that will fit your video. 60 Minutes will be too short, so you need one of the 90 minutes settings (or longer, which knocks down the video bitrate a bit, but may prevent stutters, but for the short term use a 90 minute setting.) The difference between the settings (Good, Fast etc, I do not remember all of the Compressor 1 variations and not in front of a computer right now with it loaded, can look later if you like) if using different types of encoding- VBR, CBR http://dvdstepbystep.com/faqs_4.php).
I am pretty sure rates are adjusted based on the lesser time being higher rates, while speed/quality is VBR/CBR. Take a look at the video rates being used, and makee sure the MAX Rate does not exceed 7.4 (or a bit less to be safe)
You may just want to try the fast setting first to see if it cures the build issue, then move on if you are in the clear. (Or you can try the two pass build for overnight). Make sure you have room on the disc where you are building the encoded file.

Newbie ERROR- URL Encoded SQL Length exceeds allowed 32K limit

My SQL Query worked fine yesterday.( I'm still in developing mode)
I made a copy of it and put it into a text file.( Just to be sure I had it.)
Today When I tried to run it in APEX , I get error
URL Encoded SQL Length exceeds 32K limit.
Is there any way to tell how the size of my query ( for example 33K)
is using?
TIA
Steve42

I had to put out some other fires for the last few days.
I'm trying to use it in SQL worksheet.
That is my entire error message. It does NOT have an Error #.
Product Build: 3.0.0.00.20
TIA,
Steve42

Error 200019

I am trying to read multiple channels with a PCI-MIO-16E-1. In doing so, I am getting error 200019. I had no problem when trying to read a single channel. I have attached the code.
Thanks in advance.
Attachments:
Funct gen - variable freq, amp, duty cycle_03_16_09_a.vi ‏79 KB

The PCI-MIO-16E-1 has a max sampling rate of 1.25MS/s. But you are using 5MS/s to read the samples. Hence the error. The 1.25MS/s is the aggregate sampling rate. So, if you are using to multiple channels, make sure that the aggregate sampling falls under the specified value. Reduce the sampling rate in your vi to 700kS/s and I am expecting it to work fine.
Cheers,
Satish

Plz help Error in encoding Soap Message

hii,
im new to web services ,im doing a test application using netbeans 5.5 which retrieves some information from database.Its working fine if i return eother a string or a list of strings from webservice method.
But if im using a user defined datatype as return value its giving follwing error
SEVERE: Error in encoding SOAP Message
Error in encoding SOAP Message
at com.sun.xml.ws.encoding.soap.server.SOAPXMLEncoder.toSOAPMessage(SOAPXMLEncoder.java:113)
at com.sun.xml.ws.handler.SOAPMessageContextImpl.getMessage(SOAPMessageContextImpl.java:97)
at org.handler.PropertyMessageHandler.handleMessage(PropertyMessageHandler.java:27)
at org.handler.PropertyMessageHandler.handleMessage(PropertyMessageHandler.java:24)
at com.sun.xml.ws.handler.HandlerChainCaller.callProtocolHandlers(HandlerChainCaller.java:675)
at com.sun.xml.ws.handler.HandlerChainCaller.internalCallHandlers(HandlerChainCaller.java:444)
at com.sun.xml.ws.handler.HandlerChainCaller.callHandlers(HandlerChainCaller.java:374)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.callHandlersOnResponse(SOAPMessageDispatcher.java:448)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.getResponse(SOAPMessageDispatcher.java:307)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:601)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:141)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.handle(WSServletDelegate.java:333)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:288)
at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:77)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.MarshalException
- with linked exception:
[javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context]
at com.sun.xml.ws.encoding.jaxb.JAXBBridgeInfo.serialize(JAXBBridgeInfo.java:88)
at com.sun.xml.ws.encoding.soap.SOAPEncoder.writeJAXBBridgeInfo(SOAPEncoder.java:252)
at com.sun.xml.ws.encoding.soap.SOAPEncoder.writeBody(SOAPEncoder.java:569)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLEncoder.toSOAPMessage(SOAPXMLEncoder.java:95)
... 33 more
Caused by: javax.xml.bind.MarshalException
- with linked exception:
[javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context]
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:246)
at com.sun.xml.bind.v2.runtime.BridgeImpl.marshal(BridgeImpl.java:64)
at com.sun.xml.bind.api.Bridge.marshal(Bridge.java:86)
at com.sun.xml.ws.encoding.jaxb.JAXBBridgeInfo.serialize(JAXBBridgeInfo.java:86)
... 36 more
Caused by: javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context
at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:219)
at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:234)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:562)
at com.sun.xml.bind.v2.runtime.property.ArrayElementNodeProperty.serializeItem(ArrayElementNodeProperty.java:29)
at com.sun.xml.bind.v2.runtime.property.ArrayElementProperty.serializeListBody(ArrayElementProperty.java:132)
at com.sun.xml.bind.v2.runtime.property.ArrayERProperty.serializeBody(ArrayERProperty.java:101)
at com.sun.xml.bind.v2.runtime.ClassBeanInfoImpl.serializeBody(ClassBeanInfoImpl.java:293)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:594)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:241)
... 39 more
Caused by: javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context
at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getBeanInfo(JAXBContextImpl.java:474)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:557)
... 45 more
Can any body help me im struck here for the last 2 days
thnx
RAJESH

Are u sure that u correctly configure Apex (marvel.conf)?
Have u include this file in httpd.conf?

Error in encoding SOAP Message

hii,
im new to web services ,im doing a test application using netbeans 5.5 which retrieves some information from database.Its working fine if i return eother a string or a list of strings from webservice method.
But if im using a user defined datatype as return value its giving follwing error
SEVERE: Error in encoding SOAP Message
Error in encoding SOAP Message
at com.sun.xml.ws.encoding.soap.server.SOAPXMLEncoder.toSOAPMessage(SOAPXMLEncoder.java:113)
at com.sun.xml.ws.handler.SOAPMessageContextImpl.getMessage(SOAPMessageContextImpl.java:97)
at org.handler.PropertyMessageHandler.handleMessage(PropertyMessageHandler.java:27)
at org.handler.PropertyMessageHandler.handleMessage(PropertyMessageHandler.java:24)
at com.sun.xml.ws.handler.HandlerChainCaller.callProtocolHandlers(HandlerChainCaller.java:675)
at com.sun.xml.ws.handler.HandlerChainCaller.internalCallHandlers(HandlerChainCaller.java:444)
at com.sun.xml.ws.handler.HandlerChainCaller.callHandlers(HandlerChainCaller.java:374)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.callHandlersOnResponse(SOAPMessageDispatcher.java:448)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.getResponse(SOAPMessageDispatcher.java:307)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:601)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:141)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.handle(WSServletDelegate.java:333)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:288)
at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:77)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.MarshalException
- with linked exception:
[javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context]
at com.sun.xml.ws.encoding.jaxb.JAXBBridgeInfo.serialize(JAXBBridgeInfo.java:88)
at com.sun.xml.ws.encoding.soap.SOAPEncoder.writeJAXBBridgeInfo(SOAPEncoder.java:252)
at com.sun.xml.ws.encoding.soap.SOAPEncoder.writeBody(SOAPEncoder.java:569)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLEncoder.toSOAPMessage(SOAPXMLEncoder.java:95)
... 33 more
Caused by: javax.xml.bind.MarshalException
- with linked exception:
[javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context]
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:246)
at com.sun.xml.bind.v2.runtime.BridgeImpl.marshal(BridgeImpl.java:64)
at com.sun.xml.bind.api.Bridge.marshal(Bridge.java:86)
at com.sun.xml.ws.encoding.jaxb.JAXBBridgeInfo.serialize(JAXBBridgeInfo.java:86)
... 36 more
Caused by: javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context
at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:219)
at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:234)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:562)
at com.sun.xml.bind.v2.runtime.property.ArrayElementNodeProperty.serializeItem(ArrayElementNodeProperty.java:29)
at com.sun.xml.bind.v2.runtime.property.ArrayElementProperty.serializeListBody(ArrayElementProperty.java:132)
at com.sun.xml.bind.v2.runtime.property.ArrayERProperty.serializeBody(ArrayERProperty.java:101)
at com.sun.xml.bind.v2.runtime.ClassBeanInfoImpl.serializeBody(ClassBeanInfoImpl.java:293)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:594)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:241)
... 39 more
Caused by: javax.xml.bind.JAXBException: org.bean.PropertyBean nor any of its super class is known to this context
at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getBeanInfo(JAXBContextImpl.java:474)
at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:557)
... 45 more
Can any body help me im struck here for the last 2 days
thnx
RAJESH

Hello again,
because it seems to be a JavaScript issue, I opend this discussion in that forum: http://forums.adobe.com/message/6205851#6205851

Error in encoded stream: needed 4 valid base64 characters but only got 3 be

Folks,
We are trying to copying a file in to temp directory. But we keep getting this error. Please help..
import java.io.FileOutputStream;
   myfile = File.createTempFile(atType, fName,
                   new File(FileUtils.getTmpRootDir()));
           output = new FileOutputStream(myFile); java.io.IOException: Error in encoded stream: needed 4 valid base64 characters but only got 3 before EOF, the 10 most recent characters were: "-A-G-EASDF"
_Thanks Much
:rolleyes:

What are the values of atType and fName? Also, what does getTmpRootDir() do? Also, which of those two lines of code you posted does the error occur on?

Error in encoding then.....

hi. i made my project in iDVD with an apple theme. upon trying to burn however it says there is an error during encoding with menus/slideshows. so i followed the advice i found in another post saying to save as a disk image and burn using the img with disk utility, however! when i did that, my dvd was really diminished in quality and a few of the slideshows didnt even work. ?? even though they work fine in the preview in iDVD.

You did not say if your slide shows were made within iDVD slideshow pane or made from iMovie or iPhoto into a QT file.
I have had many problems as well with QT slide show.
I have discovered that iDVD5 did not like the QT slideshow. So I ended up burning with iDVD4.
you can read the following links relating to my problems.
http://discussions.apple.com/thread.jspa?threadID=688655&tstart=0
and to isolate the problem files that iDVD5 hangs up on, read my reply to Jack in this trhead
http://discussions.apple.com/message.jspa?messageID=3378713#3378713
it did quit during encoding the "menus slideshows"
When you isolate the problem file, you might have to re-import it into iMovie and re-export it. or re-export from iPHoto, if it was the case
read on
michel

Error while encoding then missing assets

I am trying to burn a file that has been exported from Final Cut. Compressor used in the sequence was DV NTSC. I exported as a QT movie (.mov) and left everything to current settings and self compressed. The file was a little under 2GB. I Imported into DVD Studio Pro which played the movie in viewer and in the simulation just fine. When I tell it to burn it gives me an "error while encoding file" and tells me the file. When I go back into the assets window the movie (not the audio from the movie) is red indicated it is not linked. When I relink it, it works, then go to burn and the same cycle starts again. I had this problem before and it magically worked a couple of days later. But, now it is happening again and I want to be active in finding a problem instead of waiting around and praying. Any ideas? Codec conflict? .mov? uncompressed? Is DV an issue? maybe DV exported as mov? I have no clue, but I feel like someone may have had this problem before and if we fix it, someone else will benefit from our solution Thanks for help!

Note: I was running FCP and DVDSP at the same time. Maybe thats it? I feel like it shouldn't be. I am restarting my computer and PRAMming right now.

Error while encoding

I get an error when I try to encode/burn my video. Heres what it says:
Error while encoding file:/Users/matt/Desktop/indian party video 2 (first part)
The problem is specifically with the video asset but I don't know what it could be. It's not the audio or anything else. The video asset won't even encode when I turn on background encoding. Instead of getting a green light I get this: "E:" with an empty bar next to it.
Heres the specs on the video asset:
Format: Quicktime video
bits/second (avg.): 5,500,000
width: 720
height: 480
closed GOP: yes
Frame rate: 29.97 non-drop
Aspect ratio: 4:3
Length: 00:45:26;06
Codecs: DV/DVCPRO - NTSC, Timecode, Text
The estimated encode size for the whole DVD is only 2 GB
Heres how I have the encoding set up:
Video standard: NTSC
Aspect Ratio: 4:3
Feild order: Auto
Encode mode: Two pass VBR
Bit Rate: 5.5
Max Bit rate: 7.2
Motion estimation: Best
anyone know whats stopping it from encoding?

Ouch Bob,
Have you tried deleteing your FCP preferences and submitting again. I always thought that the "can't connect.." error was only intermittent!
Can you make your movie out of FCP, and then directly take that movie into Compressor? If you can't there is a patch floating around which allows you to regain access to the mpeg export facility in Quicktime 7. When I think of the name I will post it for you.
Otherwise if you need to compile inside DVDSP, is your media on a firewire drive? If it is bring it back to an internal disk setup.
Good Luck

Adobe Media Encoder error when encoding: winfile.cpp-759

Mods: Please move this to the appropriate thread wasn't sure to move it to Premiere or Flash
I receive this error when trying to encode AVI to H.264 using Adobe Media Encoder CS5 (64bit):
When searching through the forums, several suggestions for CS4 and current releases that I have tried are:
clearing the media cache through AME, and the folder location in %APPDATA%\Adobe\Common\
installing K-Lite Codec pack
changing the media cache files folder to a separate disk entirely
updating to the latest version (at the time of post ver 5.0.1.0)
uninstalling and re-installing AME (as an error might have occurred during updates)
verifying that the CPU has SSE support and is enabled
I expanded my search to google which gave similar errors (winfile.cpp-754, winfile.cpp-758, etc.) and a few responses were uninstalling any Nero products (don't have any burning programs on this computer - unless you count Windows)
The system that I have is:
MS Windows 7 64-bit
Intel Core 2 Quad Q6600 @ 2.40GHz
2x 1.0GB Dual-Channel DDR2 @ 800MHz
512MB GeForce 9600 GHz
2x 250GB HDD Mirrored
External USB 500GB HDD
Any ideas as to what the cause of this is?
LK.

The information about installing codecs packs is true. It usually does more damage to your codecs already present with software already installed on your computer, and the registry settings even after removing it. That is why it is in good practice to do full image back ups monthy, saving the latest 3 for when I utilize last resort methods such as codec packs.
Adobe CS5 software has been working fine on my computer ever since its installation July. I forgot to mention that I have successfully used Premiere Pro CS5 for editing a dozen files ranging from SD small res to HD 1080i. This also includes just using AME CS5 itself for transcoding files for supported playback on different devices. I notice a greater difference in speed when using a more up to date machine that uses a GTX 285 card for GPU playback - a lot faster and smoother.
I have a 2nd, slightly older computer, that houses an extra drive I put in there to use as a scratch disk. I occasionally add that disk to the computer that has CS5 currently installed as a scratch disk for editing video. The external USB drive is used to store the final product and my backups.
This error has only come up 1 time out of the 49 files I have encoded that usually run 10 minutes to 1.5 hours. I had 9 AVI files in the encoding queue and it always stopped at this 1 particular file. I skipped the file and encoded the rest successfully, but I want to know why it causes an error in AME because this has never happened before. I have even used it on a more up-to-date machine spec wise, thinking that there is a 1% possibility that it doesn't like my computer. The same error was produced. The 9 files that I did encode are roughly the same video and audio format - just this one is the error.
I gave the file to my friend who was supposed to analyze before I got home - I usually assist them in PC problems and built his better-than-mine PC.
Any other suggestions for this error and/or a solution?
Lk

I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before. I've checked the mapping for errors and found none. When I attempt to burn a DVD, the error mentioned above appears after a few minutes. I've tried to update all software, restart the computer, and use other DVRs. Any adivice would be most helpful. Thanks in advance!

Hi
To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
If problem persists in encoding part then
• iDVD got a corrupted pref file - very common problem
• Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
• Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
Material - Here You need to supply specific information
• Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
• Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
Yours just trying and Guessing Bengt W

Adobe Media Encoder 4.0.0.374 - Media Offline Error when encoding

My problem is a little urgent, so, if possible, i want a fast answer.
I edited my video in Adobe Premiere Pro CS4. When it was done, i tryed to export it, in File > Export > Media (Ps. In my program, i don't have File > Export > Movie). I set my video export settings, and then accepted. The Adobe Media Encoder 4.0.0.374 window appeared, with my project in the queue list. Then, i pressed in "Encode". First, the program is slower than normally to load the file, but i think it can be that my video is too long. After load, it starts to encode. After a time, in the preview box, appear the "Media Offline" ( and never is the same footage ) image, the same of Premiere Pro CS4. After a little, a "Encoding unsucceful. Unknown Error" appears, and the encoding stops. I don't know if is a Premiere Pro or Media Encoder error, so i posted here.
Considerations:
Before i encode, i ever verify (and fix if necessary) if all videos of the project is linked, but ever time i reopen the project, some footages ( never the same ) are unlinked, and i have to link again.
I tryed to encode various differents formats, like AVI, WMV or F4V, but in every time i get the error. I tryed even to export first the audio, then the video, separated, to link after, but only the audio is succeful exported.
I am using Windows 7 Ultimate, with a 4gb RAM, 1TB HD and Pentium Dual-Core 3Ghz.
I just got to encode with succes some times before. This is the first time it occurs.
I used the program (Premiere Pro) normally, some days ago, until 02/11. Since 03/11, it slowed. I just disabled all visual effects, disfragmented my disk, cleaned, and set the "Use more energy to more process" settings, but my program is still slow.
If needed more considerations, ask to me.
I just searched for similar problem, but dont got any result.
Sorry if my english is bad, i am Braziliam.

I have a similar problem. When I attempt to encode a list of clips, Media Encoder sometimes fails with a media offline warning. The media is just fine, nothing actually off line nor corrupted. If I elect to encode directly from Premiere Pro, the compilation proceeds normally. That's not practical when I have a list of clips and other things to do besides watch the creeping status bar.
My temporary fix was to uncheck the "import sequences natively" option. It's a little slower using the dynamic link, but it works, and my hair can start growing again.
This glitch appeared only with the latest update via Creative Cloud.

Error 200019 encoder

Similar Messages

Maybe you are looking for