Error 2001 with Maps applicaion

Hi,
I have a problem with maps on my BB Q10. I currently live in the Czech Republic and whenever I search for an existing location like "Brno, Opletalova" it's found and offered in the list. After I select it to be shown I get this error:
"There is a problem communicating with the server. Try again later (2001)"
Though searching for simple location like cities works normally. This problem happens only when I search for streets and similar.
I would appriciate any help with this.
Thanks,
Peter

There was someone from Hungary the other day with same issue. From some of the responses I gather there are or were issues in Hungary.
I did a search and found others in Czech Republic reporting the issue, but I didn't pay close attention to the dates of the threads.
That is why I suggested it might be a problem that is location wide.
At any rate I don't believe (and I guess you don't either) that it is a matter within your control.
- Ira

Similar Messages

Error 2001 with iTunes

I am using OS10.5.8 and iTunes 9.0.2.
I tried to
1) download a free iTune music
2) "Authorize Computer" for my iPod
and received the same error on both attempts. The message says:
"We could not complete your iTunes store request. An unkown error occurred (2001)."
I asked online support but they couldn't answer what the problem was. Anybody knows how to solve this?

I finally resolved this after a frustrating month or so. Seems to be related to update of iTunes that now requires Apple ID (instead of the AOL ID I used previously). I still was having issues after putting in my Apple ID. So someone here suggested going into iTunes "Account" where I had to update my info, which was no biggie as it was old info. At some point previously I may have gotten a window that said I need to do this, and may have ignored (user error?) but then the iTunes programmers should've had in place more of a Tunes Nazi window (no Tunes for you until you fill out update!) Once I did that I was able to download immediately even without restarting. I hope this helps others and saves aggravation. If not, you can always download stuff from amazon.com and have it go into your iTunes folder... hmm, competition might be a good thing here! PEACE!

Error in messege mapping " Structure with min!=max without mapping"

Hi Experts,
got an error in messege mapping, after mapping was done as " Structure with min!=max without mapping" . Any idea what is my mistake!
Points will be rewarded.
Thanks and Regards,
Arnab.

Hi Mohd,
This error pops up when your mapping is incomplete...
First check all the fields are mapped....
and check all the required fields are mapped which are in RED in colour...if not map to the specific field or to a constant or disable that one...and check the type of the sourse and target fields.....is it string,floatetc
you got a element, which occurences (=minOccurs & maxOccurs) are unequal.
Those fields have to be mapped.
http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm
Reward points if this helps
Regards
Pragathi.

Iphone 5 stuck in recovery mode with an error 2001

My iPhone 5 is stuck in the recovery mode. I have tried linking it up to iTunes by pressing the home key etc and managed to link it up but after resetting it to factory settings as asked and it removing software etc, it just comes up with the error 2001. Please help!
It has not been dropped, near liquids or anything like that.
It just started doing it one day after putting it on charge. It felt really hot when it was fully charged. Anyone have any ideas how to fix this?

Thanks for the help Lawrence. I have tried that already but still not working. Tried different USB port and cables and different computers. No luck so far
so annoying...

IT2001 error, no time constraint reachion for infotype 2001 with tm const00

Dear Seriors,
When I try to add any absence, it show the below given error message (red colour), but if I hit the enter button it allows me to mark absence.
no time constraint reachion for infotype 2001 with time constraint class 001
What might be the reason?
Regards
ET

The time constraint class is used to check for collisions between Time Management infotypes (2001 to 2012). It allows you to specify different regulations for checking for collisions between individual subtypes.
The views Time Constraint Reaction to Time Management Infotypes (V_554Y_B) and Global Time Constraint Reaction (V_T554Y) contain rules for the collision check.
Please explore on this.

Getting Error in java mapping: Parsing empty source. Root element expected!

Hi Experts,
   I am using java mapping for schema validation of input message. I have followed all the standard procedures and implemented the java class in the interface mapping.
My interface mapping is like this:
OrderData --->Java Class ---SchemaValidate
                     Mesg Map ---OrderData_to_BAP --->BAPI Msg
So first I want to validate the schema of the input message. If the input message is invalid then XI should throw an exception. Then I use the actual message mapping to map the input order data to the BAPI input parameters.
In the java code I am using xerces parser.
The java code works fine when I run it as a standalone application.
The interface mapping also works fine if I don't include the java mapping. Ofcourse schema validation does not happen.
But when I test the interface mapping by including the java mapping then I am getting the error:
Call method execute of the application Java mapping SchemaValidate
Java mapping SchemaValidate completed. (execute() of SchemaValidate
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Parsing an empty source. Root element expected!
What am I doing wrong? Why it is not getting the root element?
My Java code is as follows:
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.helpers.*;
import org.xml.sax.*;
import org.apache.xerces.jaxp.*;
Sample mapper for SAP-XI
@author Gopal
public class SchemaValidate implements StreamTransformation {
    //Constants when using XML Schema for SAX parsing.
     static final String JAXP_SCHEMA_LANGUAGE =
     "http://java.sun.com/xml/jaxp/properties/schemaLanguage";
     static final String W3C_XML_SCHEMA =
     "http://www.w3.org/2001/XMLSchema";
     static final String JAXP_SCHEMA_SOURCE =
     "http://java.sun.com/xml/jaxp/properties/schemaSource";
Injection of mapping parameters
from integration engine
@param map Map with configuration data
    public void setParameter(Map map) {
Mapping implementation
@param inputStream Input data from integration engine
@param outputStream Output data to integration engine
    public void execute(InputStream inputStream,
                        OutputStream outputStream)
      throws StreamTransformationException {
        try {
              // obtain an object of class javax.xml.parsers.SAXParser,
              SAXParserFactory spf = SAXParserFactoryImpl.newInstance();
              spf.setNamespaceAware(true);
              spf.setValidating(true);
              SAXParser sp = spf.newSAXParser();
              // setup the schema file
              sp.setProperty(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
              sp.setProperty(JAXP_SCHEMA_SOURCE, new File("IOReqMsgSchema.xsd"));
              //parse the input xml using the given schema
              sp.parse(inputStream, new ParseErrorHandler());
        catch(SAXException se) {
          se.printStackTrace();
        catch ( Exception e ) {
          throw new StreamTransformationException( e.getMessage() );
My input message is :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:OrderCreate_request xmlns:ns0="mynamespace">
   <ORDER>HTEST1234567</ORDER>
   <ORDER_TYPE>z001</ORDER_TYPE>
   <ORDER_NAME>Test Order</ORDER_NAME>
   <CO_AREA>INTC</CO_AREA>
   <CCTR_POSTED>1234567890888888888</CCTR_POSTED>
   <CURRENCY>USD</CURRENCY>
   <PERSON_RESP>12345679</PERSON_RESP>
</ns0:OrderCreate_request>
Kindly help! please this is urgent!!!!!!
Thanks
Gopal
Edited by: gopalkrishna baliga on Feb 28, 2008 9:34 AM

Hi Stefan,
   I did the code changes to return output stream and the java code works perfectly in standalone mode in my PC.
   But when I use the same in the Java mapping with XI then It throws an error "Getting Error in java mapping: Parsing empty source. Root element expected!".
My XI J2EE server has JDK1.4.3.11.
Is there any limitation of using SAX parser in XI? If Yes, then which parser should be used for schema validation in XI?
I have included the XSD file for schema validation along with class files in the .jar file. This jar file is then imported in XI repository. Is the XI engine not able to read the XSD file?
Do I have to handle reading XSD file differently? Any suggession how?
Is this parser error due to some security access?
Kindly help me! I have been struggling with this problem since 2 weeks. I will be greatfull to you if you can help me.
Thanks
Gopal

Data source cannot be created : MAPVIEWER-00011: Error creating a map data

Hi everyone,
i am getting an error meaasge while creating datasource
" Data source cannot be created : MAPVIEWER-00011: Error creating a map data source."
pls help

You should assign only one value to jdbc_sid. Try with this
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="false"
/>
Make sure that oracle sid is 'ORCL'
Sujnan

Cannot restore iPhone 5, iOS 6.1.4, error 2001 and 2006

My iPhone 5 (AT&T, purchased on March 2013) suddenly went blank - without being dropped down, or *drowned* in water/ liquid - then a blinking (Apple) logo ...
Following Internet forums, I kept the "Home" button pressed a while, the sign of an USB cable attemting to connect to iTunes appeared.
iTunes asked me to restore, I agreed, it downloaded the "iPhone5,1_6.1.4_10B350_Restore.ipsw", then extracted, then verifying with Apple for a while, then appeared the message that this iPhone cannot be restored, error 2001.
I retried, same result, sometime the error is 2006.
I retried with another MacBook Pro, then iMac, same error 2006 or 2001 !
Strange thing : when trying in iTunes in Windows 8 (via BootCamp on those same iMacs, MacBook Pro), the error changed to error 21 !!!
I'd tried in several other ways :
01. DFU (pressing both "Home" and "Power" buttons ... ...),
02. turn off Intego/ Sophos/ ClamXav,
03. delete that .ipsw file to download a new one,
04. remove the iPhoneUpdater.log files, pretending to cheat the system
05. confirm via System Information that I am plugging the iPhone only to one of the USB Hi-Speed Buses (thinking error 2001 & 2006 relates to USB ports)
... the *iFool* beauty keeps sleeping like ... a brick !
Any help would be highly appreciated. Many thanks in advance.
BAKZOO.

Hey guys, i have the same issue.
Yesterday my iphone lost network, i turned it off, and wanted to turn on, but iphone didn't react.
Once i plugged charging cable in, apple logo appeared, then screen went black, then apple logo appeared once again. So it seems like iphone goes into reboot after apple logo appears.
I connected iphone to macbook pro while holding home button, itunes showed me iphone 5 in recovery mode, then iOS was downloaded, but recovery didn't even started. Every time it shows me 2001 error. Sometimes recovery fails with 2006 error. I tried to change USB port, tried another original USB cable, tried another macbook pro, both are updated to OS X 10.8.4, iTunes 11.0.4(4), but the same 2001 error comes up over and over again.
I did everything that official support advises on this page http://support.apple.com/kb/TS3694?viewlocale=ru_RU&locale=ru_RU#error2001, but nothing really helps
Any ideas on what might help? There's no Apple stores here in Uktraine so i can not return my iphone and get a new one

JDev 1013 Error: Internal compilation error, terminated with a fatal except

I've a class I compiled used in JDev 10.1.2.1.
Now I try to compile it with JDev 10.1.3 but I get an error :
Error: Internal compilation error, terminated with a fatal exception
What does it means ?
How can I solve it ?
I tried to use both 5.0 and 1.4.2 compilers but the result is the same.
Tks
Tullio
Here the class
/* The following code was generated by JFlex 1.2.2 on 05/10/04 17.46 */
* Copyright (C) 1998,99 Gerwin Klein <[email protected]>. *
* All rights reserved. *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License. See the file *
* COPYRIGHT for more information. *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, write to the Free Software Foundation, Inc., *
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *
package axioma.a4j.parser;
import java_cup.runtime.*;
* This class is a scanner generated by
* JFlex 1.2.2
* on 05/10/04 17.46 from the specification file
* <tt>file:/C:/A4j/A4j/Common/Parser/grammatiche/Scanner.flex</tt>
public class AxScanner implements java_cup.runtime.Scanner {
/** this character denotes the end of file */
final public static int YYEOF = -1;
/** lexical states */
final public static int STRING = 1;
final public static int YYINITIAL = 0;
final public static int CHARLITERAL = 2;
* Translates characters to character classes
final private static String yycmap_packed =
"\11\10\1\3\1\2\1\0\1\3\1\1\16\10\4\0\1\3\1\50"+
"\1\16\1\0\1\7\1\0\1\44\1\15\1\31\1\32\1\5\1\41"+
"\1\40\1\42\1\14\1\4\1\12\11\13\1\0\1\37\1\47\1\46"+
"\1\45\2\0\32\11\1\35\1\17\1\36\1\0\1\11\1\0\1\25"+
"\1\51\2\11\1\23\1\24\5\11\1\26\1\6\1\30\3\11\1\21"+
"\1\27\1\20\1\22\5\11\1\33\1\43\1\34\1\0\41\10\2\0"+
"\4\11\4\0\1\11\12\0\1\11\4\0\1\11\5\0\27\11\1\0"+
"\37\11\1\0\u0128\11\2\0\22\11\34\0\136\11\2\0\11\11\2\0"+
"\7\11\16\0\2\11\16\0\5\11\11\0\1\11\21\0\117\10\21\0"+
"\3\10\27\0\1\11\13\0\1\11\1\0\3\11\1\0\1\11\1\0"+
"\24\11\1\0\54\11\1\0\10\11\2\0\32\11\14\0\202\11\1\0"+
"\4\10\5\0\71\11\2\0\2\11\2\0\2\11\3\0\46\11\2\0"+
"\2\11\67\0\46\11\2\0\1\11\7\0\47\11\11\0\21\10\1\0"+
"\27\10\1\0\3\10\1\0\1\10\1\0\2\10\1\0\1\10\13\0"+
"\33\11\5\0\3\11\56\0\32\11\5\0\13\11\13\10\12\0\12\10"+
"\6\0\1\10\143\11\1\0\1\11\7\10\2\0\6\10\2\11\2\10"+
"\1\0\4\10\2\0\12\10\3\11\22\0\1\10\1\11\1\10\33\11"+
"\3\0\33\10\65\0\46\11\13\10\u0150\0\3\10\1\0\65\11\2\0"+
"\1\10\1\11\20\10\2\0\1\11\4\10\3\0\12\11\2\10\2\0"+
"\12\10\21\0\3\10\1\0\10\11\2\0\2\11\2\0\26\11\1\0"+
"\7\11\1\0\1\11\3\0\4\11\2\0\1\10\1\0\7\10\2\0"+
"\2\10\2\0\3\10\11\0\1\10\4\0\2\11\1\0\3\11\2\10"+
"\2\0\12\10\4\11\16\0\1\10\2\0\6\11\4\0\2\11\2\0"+
"\26\11\1\0\7\11\1\0\2\11\1\0\2\11\1\0\2\11\2\0"+
"\1\10\1\0\5\10\4\0\2\10\2\0\3\10\13\0\4\11\1\0"+
"\1\11\7\0\14\10\3\11\14\0\3\10\1\0\7\11\1\0\1\11"+
"\1\0\3\11\1\0\26\11\1\0\7\11\1\0\2\11\1\0\5\11"+
"\2\0\1\10\1\11\10\10\1\0\3\10\1\0\3\10\2\0\1\11"+
"\17\0\1\11\5\0\12\10\21\0\3\10\1\0\10\11\2\0\2\11"+
"\2\0\26\11\1\0\7\11\1\0\2\11\2\0\4\11\2\0\1\10"+
"\1\11\6\10\3\0\2\10\2\0\3\10\10\0\2\10\4\0\2\11"+
"\1\0\3\11\4\0\12\10\22\0\2\10\1\0\6\11\3\0\3\11"+
"\1\0\4\11\3\0\2\11\1\0\1\11\1\0\2\11\3\0\2\11"+
"\3\0\3\11\3\0\10\11\1\0\3\11\4\0\5\10\3\0\3\10"+
"\1\0\4\10\11\0\1\10\17\0\11\10\21\0\3\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\12\11\1\0\5\11\4\0\7\10"+
"\1\0\3\10\1\0\4\10\7\0\2\10\11\0\2\11\4\0\12\10"+
"\22\0\2\10\1\0\10\11\1\0\3\11\1\0\27\11\1\0\12\11"+
"\1\0\5\11\4\0\7\10\1\0\3\10\1\0\4\10\7\0\2\10"+
"\7\0\1\11\1\0\2\11\4\0\12\10\22\0\2\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\20\11\4\0\6\10\2\0\3\10"+
"\1\0\4\10\11\0\1\10\10\0\2\11\4\0\12\10\22\0\2\10"+
"\1\0\22\11\3\0\30\11\1\0\11\11\1\0\1\11\2\0\7\11"+
"\3\0\1\10\4\0\6\10\1\0\1\10\1\0\10\10\22\0\2\10"+
"\15\0\60\11\1\10\2\11\7\10\4\0\10\11\10\10\1\0\12\10"+
"\47\0\2\11\1\0\1\11\2\0\2\11\1\0\1\11\2\0\1\11"+
"\6\0\4\11\1\0\7\11\1\0\3\11\1\0\1\11\1\0\1\11"+
"\2\0\2\11\1\0\4\11\1\10\2\11\6\10\1\0\2\10\1\11"+
"\2\0\5\11\1\0\1\11\1\0\6\10\2\0\12\10\2\0\2\11"+
"\42\0\1\11\27\0\2\10\6\0\12\10\13\0\1\10\1\0\1\10"+
"\1\0\1\10\4\0\2\10\10\11\1\0\42\11\6\0\24\10\1\0"+
"\2\10\4\11\4\0\10\10\1\0\44\10\11\0\1\10\71\0\42\11"+
"\1\0\5\11\1\0\2\11\1\0\7\10\3\0\4\10\6\0\12\10"+
"\6\0\6\11\4\10\106\0\46\11\12\0\47\11\11\0\132\11\5\0"+
"\104\11\5\0\122\11\6\0\7\11\1\0\77\11\1\0\1\11\1\0"+
"\4\11\2\0\7\11\1\0\1\11\1\0\4\11\2\0\47\11\1\0"+
"\1\11\1\0\4\11\2\0\37\11\1\0\1\11\1\0\4\11\2\0"+
"\7\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0\7\11\1\0"+
"\27\11\1\0\37\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0"+
"\47\11\1\0\23\11\16\0\11\10\56\0\125\11\14\0\u026c\11\2\0"+
"\10\11\12\0\32\11\5\0\113\11\225\0\64\11\40\10\7\0\1\11"+
"\4\0\12\10\41\0\4\10\1\0\12\10\6\0\130\11\10\0\51\11"+
"\1\10\u0556\0\234\11\4\0\132\11\6\0\26\11\2\0\6\11\2\0"+
"\46\11\2\0\6\11\2\0\10\11\1\0\1\11\1\0\1\11\1\0"+
"\1\11\1\0\37\11\2\0\65\11\1\0\7\11\1\0\1\11\3\0"+
"\3\11\1\0\7\11\3\0\4\11\2\0\6\11\4\0\15\11\5\0"+
"\3\11\1\0\7\11\17\0\4\10\32\0\5\10\20\0\2\11\51\0"+
"\6\10\17\0\1\11\40\0\20\11\40\0\15\10\4\0\1\10\40\0"+
"\1\11\4\0\1\11\2\0\12\11\1\0\1\11\3\0\5\11\6\0"+
"\1\11\1\0\1\11\1\0\1\11\1\0\4\11\1\0\3\11\1\0"+
"\7\11\46\0\44\11\u0e81\0\3\11\31\0\11\11\6\10\1\0\5\11"+
"\2\0\3\11\6\0\124\11\4\0\2\10\2\0\2\11\2\0\136\11"+
"\6\0\50\11\4\0\136\11\21\0\30\11\u0248\0\u19b6\11\112\0\u51a6\11"+
"\132\0\u048d\11\u0773\0\u2ba4\11\u215c\0\u012e\11\322\0\7\11\14\0\5\11"+
"\5\0\1\11\1\10\12\11\1\0\15\11\1\0\5\11\1\0\1\11"+
"\1\0\2\11\1\0\2\11\1\0\154\11\41\0\u016b\11\22\0\100\11"+
"\2\0\66\11\50\0\14\11\44\0\4\10\17\0\2\11\30\0\3\11"+
"\31\0\1\11\6\0\3\11\1\0\1\11\1\0\207\11\2\0\1\10"+
"\4\0\1\11\13\0\12\10\7\0\32\11\4\0\1\11\1\0\32\11"+
"\12\0\132\11\3\0\6\11\2\0\6\11\2\0\6\11\2\0\3\11"+
"\3\0\2\11\3\0\2\11\22\0\3\10\4\0";
* Translates characters to character classes
final private static char [] yycmap = yy_unpack_cmap(yycmap_packed);
* Translates a state to a row index in the transition table
final private static int yy_rowMap [] = {
0, 42, 84, 126, 168, 126, 210, 126, 252, 294,
336, 378, 126, 126, 420, 462, 504, 126, 126, 126,
126, 126, 126, 126, 126, 126, 126, 546, 126, 588,
126, 630, 672, 714, 756, 126, 126, 798, 840, 882,
126, 924, 966, 1008, 1050, 336, 1092, 1134, 1176, 1218,
126, 126, 126, 126, 126, 126, 126, 126, 126, 126,
126, 126, 126, 126, 1260, 1302, 1344, 1386, 1428, 1470,
1512, 1554, 126, 1596, 1638, 1680, 1722, 126, 126, 126,
126, 126, 126, 126, 1764, 294, 1806, 294, 294
* The packed transition table of the DFA
final private static String yy_packed =
"\1\4\1\5\2\6\1\7\1\10\1\11\1\12\1\4"+
"\1\12\1\13\1\14\1\4\1\15\1\16\1\4\1\17"+
"\3\12\1\20\3\12\1\21\1\22\1\23\1\24\1\25"+
"\1\26\1\27\1\30\1\31\1\32\1\33\1\34\1\35"+
"\1\36\1\37\1\40\1\41\1\12\1\42\1\43\1\44"+
"\12\42\1\45\1\42\1\46\32\42\1\47\1\50\1\51"+
"\13\47\1\4\1\52\32\47\54\0\1\6\53\0\1\53"+
"\1\54\52\0\1\12\1\55\4\12\4\0\11\12\20\0"+
"\1\12\6\0\6\12\4\0\11\12\20\0\1\12\12\0"+
"\2\56\1\57\47\0\2\14\1\57\43\0\6\12\4\0"+
"\1\12\1\60\7\12\20\0\1\12\6\0\6\12\4\0"+
"\5\12\1\61\3\12\20\0\1\12\6\0\6\12\4\0"+
"\2\12\1\62\6\12\20\0\1\12\43\0\1\63\54\0"+
"\1\64\51\0\1\65\51\0\1\66\3\0\1\42\2\0"+
"\12\42\1\0\1\42\1\0\32\42\2\0\1\44\47\0"+
"\2\67\1\0\12\67\1\70\1\71\1\72\1\73\1\74"+
"\2\67\1\75\3\67\1\76\20\67\1\77\15\0\1\100"+
"\36\0\1\51\47\0\2\67\1\0\12\67\1\101\1\102"+
"\1\103\1\104\1\105\2\67\1\106\3\67\1\104\20\67"+
"\1\107\1\53\1\110\1\111\47\53\52\112\6\0\6\55"+
"\4\0\11\55\20\0\1\55\12\0\2\57\44\0\6\12"+
"\4\0\2\12\1\113\6\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\114\2\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\115\2\12\20\0\1\12\15\0\1\116"+
"\51\0\1\117\51\0\1\120\51\0\1\121\51\0\1\122"+
"\51\0\1\123\51\0\1\124\36\0\1\111\47\0\5\112"+
"\1\125\44\112\6\0\6\12\4\0\3\12\1\126\5\12"+
"\20\0\1\12\6\0\6\12\4\0\7\12\1\127\1\12"+
"\20\0\1\12\6\0\6\12\4\0\6\12\1\130\2\12"+
"\20\0\1\12\4\112\1\111\1\125\44\112\6\0\6\12"+
"\4\0\3\12\1\131\5\12\20\0\1\12";
* The transition table of the DFA
final private static int yytrans [] = yy_unpack(yy_packed);
/* error codes */
final private static int YY_UNKNOWN_ERROR = 0;
final private static int YY_ILLEGAL_STATE = 1;
final private static int YY_NO_MATCH = 2;
final private static int YY_PUSHBACK_2BIG = 3;
/* error messages for the codes above */
final private static String YY_ERROR_MSG[] = {
"Unkown internal scanner error",
"Internal error: unknown state",
"Error: could not match input",
"Error: pushback value was too large"
* YY_ATTRIBUTE[aState] contains the attributes of state <code>aState</code>
private final static byte YY_ATTRIBUTE[] = {
0, 0, 0, 9, 1, 9, 1, 9, 1, 1, 1, 1, 9, 9, 1, 1,
1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 1, 9, 1, 9, 1,
1, 1, 1, 9, 9, 1, 1, 1, 9, 1, 0, 0, 1, 0, 1, 1,
1, 1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
1, 1, 1, 1, 1, 1, 1, 1, 9, 0, 1, 1, 1, 9, 9, 9,
9, 9, 9, 9, 0, 1, 1, 1, 1
/** the input device */
private java.io.Reader yy_reader;
/** the current state of the DFA */
private int yy_state;
/** the current lexical state */
private int yy_lexical_state = YYINITIAL;
/** this buffer contains the current text to be matched and is
the source of the yytext() string */
private char yy_buffer[] = new char[16384];
/** the textposition at the last accepting state */
private int yy_markedPos;
/** the textposition at the last state to be included in yytext */
private int yy_pushbackPos;
/** the current text position in the buffer */
private int yy_currentPos;
/** startRead marks the beginning of the yytext() string in the buffer */
private int yy_startRead;
/** endRead marks the last character in the buffer, that has been read
from input */
private int yy_endRead;
/** number of newlines encountered up to the start of the matched text */
private int yyline;
/** the number of characters up to the start of the matched text */
private int yychar;
* the number of characters from the last newline up to the start of the
* matched text
private int yycolumn;
* yy_atBOL == true <=> the scanner is currently at the beginning of a line
private boolean yy_atBOL;
/** yy_atEOF == true <=> the scanner has returned a value for EOF */
private boolean yy_atEOF;
/** denotes if the user-EOF-code has already been executed */
private boolean yy_eof_done;
/* user code: */
StringBuffer string = new StringBuffer();
private InContestoParser mContesto = null;
private Symbol symbol(int type) {
return new JavaSymbol(type, yyline+1, yycolumn+1);
private Symbol symbol(int type, Object value) {
return new JavaSymbol(type, yyline+1, yycolumn+1, value);
private Symbol axSymbol(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.VAR_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.VAR_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.VAR_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
private Symbol axMetodo(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.MET_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.MET_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.MET_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
* Set the reader and reset variables
public void setReader(java.io.Reader in) {
this.yy_lexical_state = YYINITIAL;
this.yy_atEOF = false;
this.yy_atBOL = false;
this.yy_eof_done = false;
this.yy_state = 0;
this.yy_pushbackPos = 0;
this.yy_markedPos = 0;
this.yy_currentPos = 0;
this.yy_startRead = 0;
this.yy_endRead = 0;
this.yyline = 0;
this.yychar = 0;
this.yycolumn = 0;
this.yy_reader = in;
public void setContesto(InContestoParser xpContesto) {
mContesto = xpContesto;
public InContestoParser getContesto() {
return mContesto;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
public AxScanner() throws java.io.IOException { this(System.in); }
* Creates a new scanner
* There is also a java.io.InputStream version of this constructor.
* @param in the java.io.Reader to read input from.
AxScanner(java.io.Reader in) {
this.yy_reader = in;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
AxScanner(java.io.InputStream in) {
this(new java.io.InputStreamReader(in));
* Unpacks the compressed DFA transition table.
* @param packed the packed transition table
* @return the unpacked transition table
private static int [] yy_unpack(String packed) {
int [] trans = new int[1848];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 492) {
int count = packed.charAt(i++);
int value = packed.charAt(i++);
value--;
do trans[j++] = value; while (--count > 0);
return trans;
* Unpacks the compressed character translation table.
* @param packed the packed character translation table
* @return the unpacked character translation table
private static char [] yy_unpack_cmap(String packed) {
char [] map = new char[0x10000];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 1614) {
int count = packed.charAt(i++);
char value = packed.charAt(i++);
do map[j++] = value; while (--count > 0);
return map;
* Gets the next input character.
* @return the next character of the input stream, EOF if the
* end of the stream is reached.
* @exception IOException if any I/O-Error occurs
private int yy_advance() throws java.io.IOException {
/* standard case */
if (yy_currentPos < yy_endRead) return yy_buffer[yy_currentPos++];
/* if the eof is reached, we don't need to work hard */
if (yy_atEOF) return YYEOF;
/* otherwise: need to refill the buffer */
/* first: make room (if you can) */
if (yy_startRead > 0) {
System.arraycopy(yy_buffer, yy_startRead,
yy_buffer, 0,
yy_endRead-yy_startRead);
/* translate stored positions */
yy_endRead-= yy_startRead;
yy_currentPos-= yy_startRead;
yy_markedPos-= yy_startRead;
yy_pushbackPos-= yy_startRead;
yy_startRead = 0;
/* is the buffer big enough? */
if (yy_currentPos >= yy_buffer.length) {
/* if not: blow it up */
char newBuffer[] = new char[yy_currentPos*2];
System.arraycopy(yy_buffer, 0, newBuffer, 0, yy_buffer.length);
yy_buffer = newBuffer;
/* finally: fill the buffer with new input */
int numRead = yy_reader.read(yy_buffer, yy_endRead,
yy_buffer.length-yy_endRead);
if ( numRead == -1 ) return YYEOF;
yy_endRead+= numRead;
return yy_buffer[yy_currentPos++];
* Closes the input stream.
final public void yyclose() throws java.io.IOException {
yy_atEOF = true; /* indicate end of file */
yy_endRead = yy_startRead; /* invalidate buffer */
yy_reader.close();
* Returns the current lexical state.
final public int yystate() {
return yy_lexical_state;
* Enters a new lexical state
* @param newState the new lexical state
final public void yybegin(int newState) {
yy_lexical_state = newState;
* Returns the text matched by the current regular expression.
final public String yytext() {
return new String( yy_buffer, yy_startRead, yy_markedPos-yy_startRead );
* Returns the length of the matched text region.
final public int yylength() {
return yy_markedPos-yy_startRead;
* Reports an error that occured while scanning.
* @param errorCode the code of the errormessage to display
private void yy_ScanError(int errorCode) {
try {
System.out.println(YY_ERROR_MSG[errorCode]);
catch (ArrayIndexOutOfBoundsException e) {
System.out.println(YY_ERROR_MSG[YY_UNKNOWN_ERROR]);
System.exit(1);
* Pushes the specified amount of characters back into the input stream.
* They will be read again by then next call of the scanning method
* @param number the number of characters to be read again.
* This number must not be greater than yylength()!
private void yypushback(int number) {
if ( number > yylength() )
yy_ScanError(YY_PUSHBACK_2BIG);
yy_markedPos -= number;
* Contains user EOF-code, which will be executed exactly once,
* when the end of file is reached
private void yy_do_eof() throws java.io.IOException {
if (!yy_eof_done) {
yy_eof_done = true;
yyclose();
* Resumes scanning until the next regular expression is matched,
* the end of input is encountered or an I/O-Error occurs.
* @return the next token
* @exception IOException if any I/O-Error occurs
public java_cup.runtime.Symbol next_token() throws java.io.IOException {
int yy_input;
int yy_action;
while (true) {
boolean yy_counted = false;
for (yy_currentPos = yy_startRead; yy_currentPos < yy_markedPos;
yy_currentPos++) {
switch (yy_buffer[yy_currentPos]) {
case '\r':
yyline++;
yycolumn = 0;
yy_counted = true;
break;
case '\n':
if (yy_counted)
yy_counted = false;
else {
yyline++;
yycolumn = 0;
break;
default:
yy_counted = false;
yycolumn++;
if (yy_counted) {
if ( yy_advance() == '\n' ) yyline--;
if ( !yy_atEOF ) yy_currentPos--;
yy_action = -1;
yy_currentPos = yy_startRead = yy_markedPos;
yy_state = yy_lexical_state;
yy_forAction: {
while (true) {
yy_input = yy_advance();
if ( yy_input == YYEOF ) break yy_forAction;
int yy_next = yytrans[ yy_rowMap[yy_state] + yycmap[yy_input] ];
if (yy_next == -1) break yy_forAction;
yy_state = yy_next;
int yy_attributes = YY_ATTRIBUTE[yy_state];
if ( (yy_attributes & 1) > 0 ) {
yy_action = yy_state;
yy_markedPos = yy_currentPos;
if ( (yy_attributes & 8) > 0 ) break yy_forAction;
switch (yy_action) {
case 83:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\b')); }
case 90: break;
case 82:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\f')); }
case 91: break;
case 81:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\r')); }
case 92: break;
case 80:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\t')); }
case 93: break;
case 78:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\"')); }
case 94: break;
case 77:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\'')); }
case 95: break;
case 88:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(false)); }
case 96: break;
case 87:
{ return symbol(AxSym.NULL_LITERAL); }
case 97: break;
case 85:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(true)); }
case 98: break;
case 79:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\\')); }
case 99: break;
case 71:
case 72:
{ /* ignore */ }
case 100: break;
case 63:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character(yytext().charAt(0))); }
case 101: break;
case 62:
{ string.append( '\b' ); }
case 102: break;
case 61:
{ string.append( '\n' ); }
case 103: break;
case 60:
{ string.append( '\f' ); }
case 104: break;
case 59:
{ string.append( '\r' ); }
case 105: break;
case 58:
{ string.append( '\t' ); }
case 106: break;
case 57:
{ string.append( '\\' ); }
case 107: break;
case 56:
{ string.append( '\"' ); }
case 108: break;
case 55:
{ string.append( '\'' ); }
case 109: break;
case 25:
{ return symbol(AxSym.PLUS); }
case 110: break;
case 24:
{ return symbol(AxSym.COMMA); }
case 111: break;
case 23:
{ return symbol(AxSym.SEMI); }
case 112: break;
case 22:
{ return symbol(AxSym.RQUADRA); }
case 113: break;
case 21:
{ return symbol(AxSym.LQUADRA); }
case 114: break;
case 20:
{ return symbol(AxSym.RGRAFFA); }
case 115: break;
case 19:
{ return symbol(AxSym.LGRAFFA); }
case 116: break;
case 18:
{ return symbol(AxSym.RPAREN); }
case 117: break;
case 17:
{ return symbol(AxSym.LPAREN); }
case 118: break;
case 3:
case 37:
case 38:
case 41:
{ throw new RuntimeException("Illegal character \""+yytext()+"\" at line "+yyline+", column "+yycolumn); }
case 119: break;
case 4:
case 5:
{ /*return symbol(AxSym.INVIO);*/ /* ignore */ }
case 120: break;
case 6:
{ return symbol(AxSym.DIVIDE); }
case 121: break;
case 7:
{ return symbol(AxSym.TIMES); }
case 122: break;
case 8:
case 9:
case 14:
case 15:
case 16:
case 47:
case 48:
case 49:
case 74:
case 75:
case 76:
case 86:
{ return axSymbol(yytext()); }
case 123: break;
case 10:
case 11:
{ return symbol(AxSym.INTEGER_LITERAL, new Integer(yytext())); }
case 124: break;
case 12:
{ yybegin(STRING); string.setLength(0); }
case 125: break;
case 13:
{ yybegin(CHARLITERAL); }
case 126: break;
case 26:
{ return symbol(AxSym.MINUS); }
case 127: break;
case 27:
{ return symbol(AxSym.ORB); }
case 128: break;
case 28:
{ return symbol(AxSym.ANDB); }
case 129: break;
case 29:
{ return symbol(AxSym.GT); }
case 130: break;
case 30:
{ return symbol(AxSym.EQ); }
case 131: break;
case 31:
{ return symbol(AxSym.LT); }
case 132: break;
case 32:
{ return symbol(AxSym.NEG); }
case 133: break;
case 33:
{ string.append( yytext() ); }
case 134: break;
case 34:
case 35:
{ throw new RuntimeException("Unterminated string at end of line"); }
case 135: break;
case 36:
{ yybegin(YYINITIAL); return symbol(AxSym.STRING_LITERAL, string.toString()); }
case 136: break;
case 39:
case 40:
{ throw new RuntimeException("Unterminated character literal at end of line"); }
case 137: break;
case 44:
{ return axMetodo(yytext()); }
case 138: break;
case 46:
{ return symbol(AxSym.FLOATING_POINT_LITERAL, new Float(yytext())); }
case 139: break;
case 50:
{ return symbol(AxSym.DUEP); }
case 140: break;
case 51:
{ return symbol(AxSym.GE); }
case 141: break;
case 52:
{ return symbol(AxSym.LE); }
case 142: break;
case 53:
{ return symbol(AxSym.NE); }
case 143: break;
case 54:
case 64:
case 65:
case 66:
case 67:
case 68:
case 69:
case 70:
{ throw new RuntimeException("Illegal escape sequence \""+yytext()+"\""); }
case 144: break;
default:
if (yy_input == YYEOF && yy_startRead == yy_currentPos) {
yy_atEOF = true;
yy_do_eof();
{     return new java_cup.runtime.Symbol(AxSym.EOF);
else {
yy_ScanError(YY_NO_MATCH);
}

I setted use Javac checkbox and it worked ???
Could someone explain me what happened ?
The problem seems to be in the very long privated final string I defined, making it shorther the problem is solved again .
Tks
Tullio

XML IDOC post to R/3 Via WAS - want to see error content with JavaScript

Hi,
I am posting XML IDOCs to our R/3 system via a webpage that I have built with JavaScript. I am posting to the WAS, which is configured to read the XML IDOC with SAP's standard class handler CL_HTTP_IDOC_XML_REQUEST. We are on basis 620 support pack SAPKB62041.
In my webpage, I have the JavaScript code set to read the status and statusText so I can see the response from WAS when I post my XML IDOC. However, I am getting back very generic information when I encounter a 409 error. THe statusText is always "input_not_found". So I debugged the class handler code and found that SAP is returning back the more descriptive error info in HTML format.
I ran a packet sniffer to see what WAS returns and the info looks like this:
<html><head><title>IDoc-XML-inbound not ok</title><h1>IDoc-XML-inbound not ok</h1></head><body>
E:Table Lookup Error:300 Cannot map value for field MESCOD in table ZFI_IF_IDOCORG using values
SNDSAD = |TE| and RCVLAD = |GL| and MESTYP = |ACC_DOCUMENT|</body></html>
I want to know how I can get my webpage to read this HTML info and store that into an alert so I can read this text that I'm returning back to the HTTP post.
This is how my script looks. I'm using IE6.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Test XML</title>
<SCRIPT ID=clientEventHandlersJS LANGUAGE=javascript>

</SCRIPT>
</head>
<body>
<BR>
This page posts to
<BR>
http://some_server:1089/sap/bc/zxml_idoc?sap-client=200&sap-language=EN
<FORM name=xmlform method=post >
<P><TEXTAREA style="WIDTH: 623px; HEIGHT: 369px" name=xmlData rows=23 cols=77>
</TEXTAREA>
<P>
<INPUT type="button" value="Submit XMLHTTP" id=XMLHTTPButton name=XMLHTTPButton
LANGUAGE=javascript onclick="return XMLHTTPButton_onclick(document.xmlform.xmlData.value)">
</form>
Previously with this class handler, SAP returned the detailed info back to the "alert(xmlhttp.statusText)" and I had no problem seeing the return info. But now they have decided to format it in HTML and I don't know how to view this text since it has no ID on it to pull this into an alert box.
If anyone has any ideas, please let me know.
Thanks,
Andrea

Ok!
I have solve the problem. So, I was trying to connect via SSO within an user that was not registered in R/3 and I forgot it.
Sorry for the inconvenience.

The error is " The Mapping to Node has not been completed

Hi All,
I am getting a strange type of error and need help immediately.
The error is " The Mapping to Node COMPONENTCONTROLLER.1.PLANNING_ENTITY Has Not Been Completed" for the node that exists in the Parent component and is being used in all the child nodes thru reverse mapping.
I have done mapping in all the child nodes but still the message is coming.
Could anybody tell me the reason .
Regards,
Arti.

Basically somewhere you have defined a context node 'PLANNING_ENTITY' to be an Input-Element. At the same time you did not define (through a component usage at design time) where the input to that node is coming from. This means the mapping path to the node is not complete, and the node does not know where it is mapped to.
Either:
- You untick the checkbox 'Input-Element (ext.)' inside the controller context, or
- You find the component that uses the component with the node 'PLANNING_ENTITY' and select Component_Usage->'Name of Usage'->'Add controller usage'. Inside the controller menu you see then, you can now provide a mapping to the context node.
I realise this now sounds a little confusing, but I'm happy to provide more details should you need them.
Cheers,
Robin

Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi

Hi,
I have joined newly to the team.
When I tried to open one message mapping it throwinf follwing error...
"Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465..
Check whether the software component version ID: 44423362454456485465 is in Enterprise Service Repository. Import this version if necessary"
Is there any impact because of which in the message flow?
In my case some of the messages are failing with mapping error "runtime exception occured during application mapping com/sap/xi/tf/_SUS2MMOrderResponse_; java.lang.NullPointerException: while trying to invoke the method java.util.Map.get(java.lang.Object) of an object loaded from field com.sap.aii.map`"
And some of the messages are processed sucessfully and they also using the same mapping program 'SUS2MMOrderResponse'.
Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
Regards
Baskaran K

Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

I'm trying to restore factory setting on my ipad mini and I keep getting error 2001. It won't turn on and won't restore.

I've been trying to fix my sister in law's ipad mini. When I plug the ipad mini into itunes it say's it needs to restore factory settings. When I do that, it tries to do it, but then says it can't because of an unknown error 2001. I've tried it over and over, unplugged it and plugged it back in, tried to restore numerous times and the same thing keeps coming up. It won't turn on and the screen just shows that I need to plug it into itunes.
Any help would be greatly appreciated

See
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

IPhone 6 Plus 16GB blue screen crashes: Read, error type:Address map hole or size mis-match

Hi folks,
Some time ago I had a 16GB 6+ and it crashed with the blue screen, so I returned it. I now have a brand new one that I got from Tmobile ($75 return fee) and although it has mostly worked just fine, I have gotten 2 blue screen crashes. Below are the details from the phone's log.
What strikes me is the message "Read, error type:Address map hole or size mis-match".
Does anyone know if this could be caused by a hardware defect?
I've gotten one of these crashes running iOS 8.1.2 and another in 8.1.3.
Thanks.
Incident Identifier: 20304759-E90B-453F-BDC5-176AF4E30041
CrashReporter Key:   fcf18d230005749957728546dea3221a0c588330
Hardware Model:      iPhone7,1
Date/Time:           2015-01-25 19:43:44.913 -0800
OS Version:          iOS 8.1.2 (12B440)
panic(cpu 0 caller 0xffffff8008cd45d0): L2C PIO error (src:core0-AF snoop, address:0x1202030208, access:Read, error type:Address map hole or size mis-match, L2C_ERR_STS:100003fc00000202, L2C_ERR_ADR:0x1108e1202030208, L2C_ERR_INF:0x2107)
Debugger message: panic
OS version: 12B440
Kernel version: Darwin Kernel Version 14.0.0: Mon Nov 3 22:27:30 PST 2014; root:xnu-2783.3.22~1/RELEASE_ARM64_T7000
iBoot version: iBoot-2261.3.33
secure boot?: YES
Paniclog version: 3
Kernel slide:     0x0000000006000000
Kernel text base: 0xffffff8008002000
Epoch Time:        sec       usec
Boot    : 0x54bc22ef 0x00000000
Sleep   : 0x54c58398 0x0002abb4
Wake    : 0x54c583ae 0x000f08df
Calendar: 0x54c5b7e3 0x00025045

same with my iPhone 4s 16gb
{"os_version":"iOS 8.1.3 (12B466)","bug_type":"110"}
Incident Identifier: 582496DB-6999-468C-9504-3D1C191B9F4B
CrashReporter Key: 623a577555e51ed110b937358adfa66fba3ea447
Hardware Model: iPhone4,1
Date/Time: 2015-02-20 04:17:50.830 +0300
OS Version: iOS 8.1.3 (12B466)
panic(cpu 0 caller 0x83dc8347): "i2c1::_checkBusStatus Bus is still in a bad state; last write status 00010110 xfer 00000000 fifo 00000000 for device als"
Debugger message: panic
OS version: 12B466
Kernel version: Darwin Kernel Version 14.0.0: Mon Jan 12 21:30:11 PST 2015; root:xnu-2783.3.26~3/RELEASE_ARM_S5L8940X
Kernel slide: 0x0000000003400000
Kernel text base: 0x83401000
Boot : 0x54e68884 0x00000000
Sleep : 0x54e68a7e 0x000dd6ac
Wake : 0x54e68b19 0x00035c02
Calendar: 0x54e68b1d 0x00040927
Panicked task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
panicked thread: 0xc5066e80, backtrace: 0x81a33ca0
0x834ad94d
0x834adcb1
0x8341d5bd
0x83dc8347
0x83dc8059
0x83dc7e35
0x8389c601
0x8389c513
0x836f6f65
0x8389cc6d
0x8389ccc5
0x83a9f18d
0x83a9c27f
0x83a9c73f
0x83a9c90d
0x836f6f65
0x83a9c8e5
0x836e91e7
0x8343ed9b
0x834ab59c
Task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
Task 0x84a87948: 771 pages, 3 threads: pid 1: launchd
Task 0x84a87000: 2016 pages, 13 threads: pid 17: UserEventAgent
Task 0x84a87630: 481 pages, 4 threads: pid 18: misd
Task 0x84a87318: 4114 pages, 22 threads: pid 19: CommCenter
Task 0x87a62948: 349 pages, 2 threads: pid 21: keybagd
Task 0x87a62318: 574 pages, 4 threads: pid 23: iaptransportd
Task 0x87a62000: 868 pages, 9 threads: pid 24: configd
Task 0x87a7ac60: 793 pages, 4 threads: pid 25: lockdownd
Task 0x87a7a948: 1218 pages, 6 threads: pid 26: imagent
Task 0x87a7a630: 2771 pages, 4 threads: pid 27: atc
Task 0x87a7a318: 792 pages, 2 threads: pid 28: fairplayd.H1
Task 0x87a7a000: 1571 pages, 14 threads: pid 29: aggregated
Task 0x87c4ac60: 1069 pages, 4 threads: pid 30: routined
Task 0x87c4a318: 707 pages, 5 threads: pid 33: timed
Task 0x87d23c60: 646 pages, 2 threads: pid 35: installd
Task 0x87d23948: 2383 pages, 11 threads: pid 36: mediaserverd
Task 0x87d23318: 1279 pages, 11 threads: pid 38: ubd
Task 0x87d23000: 249 pages, 7 threads: pid 39: syslogd
Task 0x87d6ac60: 410 pages, 2 threads: pid 40: softwareupdated
Task 0x87d6a948: 851 pages, 5 threads: pid 41: mediaremoted
Task 0x87d6a630: 1877 pages, 7 threads: pid 42: identityservices
Task 0x87d6a318: 9938 pages, 16 threads: pid 43: SpringBoard
Task 0x87d6a000: 453 pages, 2 threads: pid 44: fileproviderd
Task 0x87e25c60: 609 pages, 4 threads: p

Error 2001 with Maps applicaion

Similar Messages

Maybe you are looking for