Error -200284 not responding well to suggested fixes

I get error -200284 when running labVIEW to acquire voltages.  Your suggested fixes are disabling the timeout feature (which makes the program just sit there and do nothing) or increase the sampling rate (I was using 1.5 kHz, and when I increase it to 10kHz, it will take 6 seconds of data, display it, pause, and take 6 more seconds of data and repeat rather than just continually sampling like it should).  Any ideas?

It sounds like you probably have the correlation between the Sample Rate and Number of Samples setup incorrectly. Normally you want to keep this at a 10:1 ratio of Rate to Samples on a Continuous Acquisition.
If you are sampling at 10kHz and it takes 6 seconds to returns data, you must have the Number of Samples set to 60,000? At 10kHz, you're getting 10,000 samples per second. If you had this same Number of Samples with a rate of 1.5kHz, it would take 40 seconds to acquire 60,000 samples. That's why you are getting the error. So if you follow the 10:1 rule, at 10kHz, getting 1000 samples would 100ms.
The Number of Samples input specifies how many samples to acquire each time the Read vi runs. Normally for a continuous acquisition you acquire a small number of sample per loop iteration.
Does that help at all?
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

  • Download error server not responding

    I keep getting a download error "server not responding correctly" when I try to download creative cloud.  I had it on my old system, buy now I've installed a new hard drive and can't get creative cloud downloaded.

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT4061 If my flash does not work well will Apple fix it

    My iPhone  camera flash does not work well, will Apple fix this tin store?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Can no longer access blueyonder emails on iphone.I get the following error message: The mail server 'imap4.blueyonder.co.uk is not responding', how do I fix pls?

    Hi there
    As I've mentioned above, I can't seem to access my emails from my blueyonder account on my iphone. When I first set up my account on the phone, I had no problems at all receiving emails. Then recently, just out of the blue I get the following error message: 'Cannot Get Mail, The Mail Server 'imap4.blueyonder.co.uk' is not responding.  Verfiy that you have entered the correct account info in mail settings.  I definitely have the right settings, I even checked with Virgin but they are not able to assist with my problem. Has anyone else experienced this problem, if so,how did you fix it? If you could explain in simple terms as I'm not tech savvy!
    Many thanks!

    http://www.apple.com/uk/support/iphone/mail/
    work through this

  • Trying to move aperture library from USB external drive to FW 800 external drive.i can see the projects but no thumbnails. Error application not responding. Verified permissions before started. It's been 3hours. Recommendations please

    I have consolidated iPhoto into aperture 3.2.2  and now have both aperture and iPhoto put consolidated library on 2.0 USB external drive. Have been removing duplicate photos from 23,000 down to 15,000. Problem in trying to close aperture and now tried to move library from 2.0 USB to 800FW and can see projects but no thumbnails. Aperture error now reads not responding. Can I repair library on 2.0 at this point? 

    Sharon,
    did you do anything else besides copying your library to a fire wire drive after your last post                                                                            Aperture not responding                     ?
    Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
    Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    Regards
    Léonie

  • I am getting "Not Responding" message. The fix in the Help is confusing and doesn't seem to match my setup. Using Windows 7 & firefox 7.0.1

    The problem started after last update. I tried following the directions in firefox Help without success. They were confusing and the instructions did not match what I was seeing on my screen. I need a simple quick fix thank you.

    There could be more than one reason for such messages.
    There is a problem sometimes with the database file used for history and bookmarks see
    * http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    There was a change made which seems to affect some Windows users, and has a workaround, but tends to result in images etc not loading rather than a not responding message see
    * [[firefox never finishes loading certain websites#w_lower-the-max-number-of-http-connections]]_lower-the-max-number-of-http-connections
    Are you getting any other error messages, or indications of problems ?
    * not directly related to an update but also see [[firefox hangs]]
    * and [[Firefox is already running but is not responding]]
    P.S. <br/> I note you have BrowserPlus, that has sometimes, recently, been associated with firefox problems, it would certainly be worth trying temporarily disabling that.

  • Nano was working perfectly until I had to reformat for windows computer. Now, it does not respond well to touch.

    I recently purchased a ipod nano and briefly had it synced with my macbook pro.  I recently sold my macbook pro and had to reformat ipod nano.  Since then, the ipod nano does not respond very well to touch commands and sometimes goes into apps that I did not select.  It is impossible to switch from page one to page two one app screen.
    Thanks,
    acdc1996

    Hey acdc1996,
    Welcome to Apple Support Communities! Even if you have a different generation of nano, you'll want to check out the troubleshooting steps in the following article as most of them would still be applicable:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Have a great day,
    David

  • My ipod's home button does not respond, how can i fix it?

    3 days ago my ipod home button stop working correctly and now it does not respond at all and i cant neither open or close an app
    how can i fix it?

    Try restarting you iPod Touch, if that don't solve the problem you should take it to the Apple store for service. 

  • Firefox keeps (not responding) how do I fix it?

    Firefox keeps (not responding) was using 6.0 and saw online that someone switched back to 5.0 so I tried that, still not working. Also saw on your help page that other people are having this problem. Any solutions?

    You're not the only one. Despite other comments, it's not a RAM issue. I have been having the problem for a week. I sent numerous complaints to Facebook, but their IT staff is either poorly trained or grossly understaffed, because nothing gets done, and you never get a response.
    My home page loads, and that's it. I've tried it on three computers in my home, and in Internet Explorer, Google Chrome and Mozilla Firefox, and get the same result in all three, as well as on my other computers.
    I hope they will eventually resolve the issue, but it's MADDENING. I got my Facebook access back on Thursday night, and it worked for the weekend, but I lost it this morning again.
    Feedback? Feel free to email: [email protected]

  • When launching firefox I get error 404 not found how do I fix that I upgraded to 3.2.20 (1)

    I upgraded to 3.6.20 (1) yesterday and it was working find. When I open firefox it automatically says "Error 404 not found" and nothing else but blank underneath. Any solutions I checked the plug in and it wants to download Quicktime 7 and it keeps referring to a MAC and I have Windows XP

    Hi jahhaas,
    Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
    http://support.apple.com/kb/HT1923
    Cheers,
    GB

  • Shutter not opening, tried all suggested fixes, nothing...

    Ok,
    So I've followed these threads for weeks attempting to fix camera.
    I know it's a common problem, ie shutter remains closed, unable to take pics...
    I've reset, rebooted, held finger over lens, deleted pics, rebooted again, restarted, used third party apps, even changed camera itself, so definitely software issue...
    Will a visit to an apple store help? Will they take it off my hands and replace it?
    Any ideas?
    I need the camera but love my phone...
    Help
    Cheers
    Chris

    Bring the phone to Apple if you've done all the suggested fixes.  However, you'll pay $149 for an out of warranty replacement.  Personally, I'd just get a new phone.  I wouldn't throw money at a phone that has been discontinued.

  • IPod touch home button not responding well even after replacement

    Replaced the home button of my 4th gen iPod touch 2 times but no go, I even tried to restore but it still doesn't work. Please any help will be appreciated.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
      - If still not successful that usually indicates a hardware problem. Maybe you damaged something when you repaired thw Home button.

  • When using Foxfire I keep getting "not responding", how can I fix this?

    When using foxfire I keep getting "not responding" How can I correct this?

    If this is happening with one or two specific sites, those site may have been hacked, or they may simply be bad sites.
    If it's happening with a larger number of sites, and with sites that are legit (like Google, Yahoo, Facebook, etc), then it's likely that your wireless router has been hacked. See:
    How to manage a hacked wireless router
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • Recently installed Snow Leopard software and now my printer will not respond. Any suggestions?

    I recently installed Snow Leopard. Now my printer will not respond. How do I troubleshoot that?

    Start by telling readers the make&model of your printer, and what cabling you are using to connect it.
    If you were connecting via AppleTalk, it is no longer supported, and you will need a different connection method. Readers can help you with that.
    Some printers will need updated Drivers for Snow Leopard. Some printers need to be deleted and re-added.

  • Not responding well

    My mobile(lumia 920) is not working well... Battery is draining so quickly.. And the screen is freezing out.. Need to do a reset everytime it happens.. I'm using windows 8.1 and with all the latest updates

    Developers who have entered the preview program can still get some assistance from Microsoft via the program’s support forum using this link. 

Maybe you are looking for